commit: factor the post commit status check into a cmdutil method The largefiles extension needs to set lfstatus for this status call. Otherwise, if a missing largefile is explicitly named, a confusing message is issued that says the largefile wasn't found, followed by another that says nothing changed.

largefiles: fix an explicit largefile commit after a remove (issue4969) The change in b68797f244e4 to handle a normal -> largefile switch was too aggressive in preserving the original matcher names. If a largefile is explicitly provided by the user, but only the standin exists in dirstate, then only the standin can be committed. There's still maybe an issue when the largefile is deleted outside of Mercurial: $ rm large $ hg ci -m "oops" large large: The system cannot find the file specified nothing changed [1]

context: back out sneaky code change in documentation change In 81b391a45264 (context: clarify why we don't compare file contents when nodeid differs, 2016-01-12), I also changed "node2 != _newnode" into "self.rev() is not None". I don't remember why. They are similar, but the former also catches the case where the file is clean in the dirstate (so node2 is not _newnode), but different from the "other" context. This resulted in unnecessary file content comparison a few lines further down in the code. Let's just back out the code change. Thanks to Durham Goode for spotting this.

templater: abort if infinite recursion detected while compiling In this case, a template is parsed recursively with no thunk for lazy evaluation. This patch prevents recursion by putting a dummy of the same name into a cache that will be referenced while parsing if there's a recursion. changeset = {files % changeset}\n ~~~~~~~~~ = [(_runrecursivesymbol, 'changeset')]

templater: abort if infinite recursion detected while evaluation (issue4758) It would be nice if we could detect recursion at the parsing phase, but we can't because a template can refer to a keyword of the same name. For example, "rev = {rev}" is valid if rev is a keyword, and we don't know if rev is a keyword or a template while parsing.

exchange: set 'treemanifest' param on pushed changegroups too In 5c0fd878779c (treemanifests: set bundle2 part parameter indicating treemanifest, 2016-01-08), I didn't realize I had to set the parameter separately for getbundle and unbundle. Having the parameter there on push allows us to push to an empty repo and have the requirements updated correctly.

crecord: fix help bar display issue (issue5063) Before this patch, the help bar in crecord wouldn't be printed correctly when the terminal window didn't have enough column to display it. This patch adds logic to make sure that the help bar message is always displayed. We use an ellipsis when it is not possible to display the complete message.

crecord: fix typo in the help text In the crecord help dialog, the toggle all option was wrongfully documented. Instead of using 'a', one must use 'A' to toggle all the hunks. The crecord header that is always displayed on the screen contains the right shortcut and does not need to be changed.

subrepo: better error messages in _ensuregit This patch improves the error messages raised when an OSError occurs, since simply re-raising the exception can be both confusing and misleading. For example, if "hg identify" is run inside a repository that contains a Git subrepository and the git binary could not be found, it'll exit with the message "abort: No such file or directory". That implies "identify" has a problem reading the repository itself. There's no way for the user to know what the real problem is unless they dive into the Mercurial source, which is what I ended up doing after spending hours debugging errors while provisioning a VM with Ansible (turns out I forgot to install Git on it). Descriptive errors are especially important on Windows, since it's common for Windows users to forget to set the "Path" system variable after installing Git.

hgweb: update canvas.width before dynamically redrawing graph (issue2683) After 91ac8cb79125 graph canvas width is decided once on the initial rendering. However, after graph page gets scrolled down to load more, it might need more horizontal space to draw, so it needs to resize the canvas dynamically. The exact problem that this patch solves can be seen using: hg init testfork cd testfork echo 0 > foo hg ci -Am0 echo 1 > foo hg ci -m1 hg up 0 echo 2 > foo hg ci -m2 hg gl -T '{rev}\n' @ 2 | | o 1 |/ o 0 hg serve And then by navigating to http://127.0.0.1:8000/graph/tip?revcount=1 "revcount=1" makes sure the initial graph contains only revision 2. And because the initial canvas width takes only that one revision into count, after the (immediate) AJAX update revision 1 will be cut off from the graph. We can safely set canvas width to the new value we get from the AJAX request because every time graph is updated, it is completely redrawn using all the requested nodes (in the case above it will use /graph/2?revcount=61), so the value is guaranteed not to decrease. P.S.: Sorry for parsing HTML with regexes, but I didn't start it.

run-tests: "fix" race condition in race condition fix Laurent's commit 3203dfe341f9 still suffers from a race: by the time the "job" function tries to assign to channels[channel], that list has been truncated to empty. The result is that every job thread raises an IndexError. Earlier, I tried an approach of correctly locking channels, but that caused run-tests to hang on KeyboardInterrupt sometimes. This approach is strictly hackier, but seems to actually work reliably.

rebase: restore help for rebase w/o args (issue5059) Restoring documentation accidentally removed in a9a047878e14.

shelve: use cg3 for treemanifests Similar to previous change, this teaches shelve to pick the right changegroup version for repos that use treemanifests.

repair: use cg3 for treemanifests The newly created helper changegroup.safeversion() knows to pick version 03 if the repo uses treemanifests, so just using that means we pick the right changegroup version.

changegroup: introduce safeversion() In a few places (at least repair.py and shelve.py), we want to find the best changegroup version that we can assume users of the repo will understand. For example, we choose version 01 by default, but if it's a generaldelta repo, we expect clients to support version 02 anyway, so we choose that for new bundles (for e.g. "hg strip"). Let's create a helper for this functionality in changegroup, so we can reuse it elsewhere later.

changegroup: don't support versions 01 and 02 with treemanifests Since it would be terribly expensive to convert between flat manifests and treemanifests, we have decided to simply not support changegroup version 01 and 02 with treemanifests. Therefore, let's stop announcing that we support these versions on treemanifest repos. Note that this means that older clients that try to clone from a treemanifest repo will fail. What happens is that the server, after this patch, finds that there are no common versions and raises "ValueError: no common changegroup version". This results in "abort: HTTP Error 500: Internal Server Error" on the client. Before this patch, it was no better: The server would instead find that there were directory manifest nodes to put in the changegroup 01 or 02 and raise an AssertionError on changegroup.py#668 (assert not tmfnodes), which would also appear as a 500 to the client.

run-tests: fix crash when --json and --blacklist are both used (issue5050) This patch fixes a crash when both --json and --blacklist were given as arguments of run-tests.py. Now, instead of crashing, we add an entry for blacklisted tests in the json output to show that the tests were skipped.

run-tests: fix race condition Before this patch, it was possible for run-tests to crash on a race condition. The race condition happens in the following case: - the last test finishes and calls: done.put(None) - the context switches to the main thread that clears the channels list - the context switches to the last test mentioned above, it tries to access channels[channel] and crashes This happened to me while running run-tests. This patch fixes the issue by clearing the channel before considering that the test is done.

copyright: update to 2016

transaction: abort transaction during hook exception The new transaction context did not handle the case where an exception during close should still call release. This cause pretxnclose hooks that failed to cause the transaction to fail without aborting, thus requiring a hg recover. I've added a test.

Added signature for changeset 158bdc896572

Added tag 3.7-rc for changeset 158bdc896572

shelve: lowercase flag description The help for --unknown is the *only* command that started with a capital letter

changegroup: cg3 has two empty groups *after* manifests changegroup.getchunks() determines the end of the stream by looking for an empty chunk group (two consecutive empty chunks). It ignores empty groups in the first two groups. Changegroup 3 introduced an empty chunk between the manifests and the files, which confuses getchunks(). Since it comes after the first two, getchunks() will stop there. Fix by rewriting getchunks so it first counts two groups (empty or not) and then keeps antostarts counting empty groups. With this counting, changegroup 1 and 2 have exactly one empty group after the first two groups, while changegroup 3 has two (one for directories and one for files). It's a little hard to test this at this point, but I have verified that this patch fixes narrowhg (which was broken before this patch). Also, future patches will fix "hg strip" with treemanifests, and once that's done, getchunks() will be tested through tests of "hg strip".

mq: check for reserved patch name with qimport -r (issue5033) Fix regression from 143b52fce68e. Catching aborts might not be pretty but it works and is a small change.

mq: refactor makepatchname into class method

repoview: fix corrupted hiddencache crash Mercurial (issue5042) Before this patch if the hiddencache existed but was empty, it would crash mercurial. This patch adds exception handling when reading the hiddencache to avoid the issue. When encountering a corrupted cache file we print a devel warning. There would be no point in issuing a normal warning as the user wouldn't be able to do anything about the situation. The warning looks like: devel-warn: corrupted hidden cache, removing it at: /path/to/repoview.py

repoview: add missing newline character in debug prints

commandserver: drop tell() and seek() from channels (issue5049) These operations are obviously invalid for file-like channels because they will read or write protocol headers. This patch works around the issue that "hg archive" generates a corrupted zip file on Windows commandserver because of unusable tell() implementation. But the problem still occurs without using a commandserver. $ hg archive -R not-small-repo -t zip - | cat > invalid.zip So, this patch cannot fix the issue5049 completely.

crecord: edit during hg crecord should preserve cursor position (issue5041) This patch adds a variable to keep track of what hunk was selected before the edit. We use that variable to select the hunk or its replacement after the edit.