rebase: better way to detect non-detaching revisions (issue5044) Rather than look for the lowest revision, see if the rebase state is tracking the parents of this revision. Otherwise we can't handle multiple revisions in one rebase that includes a merge revision. Fixes issue5044.

i18n-ja: synchronized with 88609cfa3745

i18n-pt_BR: synchronized with f0d3c5794380

doc: itemize text blocks to increase readability in HTML format Before this patch, text blocks changed in this patch are shown as just continuous text blocks like below in HTML format. Global configuration like the username setting is typically put into: %USERPROFILE%\mercurial.ini $HOME/.hgrc This patch itemizes these text blocks to increase readability in HTML format. Global configuration like the username setting is typically put into: - %USERPROFILE%\mercurial.ini (on Windows) - $HOME/.hgrc (on Unix, Plan9) Like as other platform sensitive container-ed text blocks, this patch also adds explicit "on PLATFORM" information to each items for readability in HTML format, even though output of "hg help config" on command line seems a little redundant. For example, on Unix: Global configuration like the username setting is typically put into: - "$HOME/.hgrc" (on Unix, Plan9)

doc: use correct indentation for enumeration This creates hg.1.html as expected.

doc: use correct cross reference in help documentation This patch fixes problems below: - ":hg:" role should be followed by not '"' but '`' - there is a help topic not "default-push" but "config.default-push"

doc: prevent literal text block from being treated as non-literal one This creates hg.1.html as expected.

doc: prevent non-literal text block from being treated as literal one This creates hg.1.html as expected.

histedit: show correct hash ID at verification error node.short() on 'ha' in verifyactions() causes broken hash ID, because it is initialized with node.hex()-ed node value.

backout: disable --merge with --no-commit (issue4874) Because "backout --merge" have to make a commit before merging, it doesn't work with --no-commit. We could change "backout --merge" to make a merge commit automatically, and --no-commit to bypass a merge commit, but that change would be undesirable because: a) it's hard to fix bad merges in general b) two commits would be created with the same --message So, this patch simply disables "--merge --no-commit".

changegroup: fix pulling to treemanifest repo from flat repo (issue5066) In c0f11347b107 (changegroup: don't support versions 01 and 02 with treemanifests, 2016-01-19), I stopped supporting use of cg1 and cg2 with treemanifest repos. What I had not considered was that it's perfectly safe to pull *to* a treemanifest repo using any changegroup version. As reported in issue5066, I therefore broke pull from old repos into a treemanifest repo. It was not covered by the test case, because that pulled from a local repo while enabling treemanifests, which enabled treemanifests on the source repo as well. After switching to pulling via HTTP, it breaks. Fix by splitting up changegroup.supportedversions() into supportedincomingversions() and supportedoutgoingversions().

tests: minor cleanup to treemanifest test

merge: don't try to merge subrepos twice (issue4988) In my patch series ending with rev 25e4b2f000c5 I switched most change/delete conflicts to be handled at the resolve layer. .hgsubstate was the one file that we weren't able to handle, so we kept the old code path around for it. The old code path added .hgsubstate to one of the other lists as the user specifies, including possibly the 'g' list. Now since we did this check after converting the actions from being keyed by file to being keyed by action type, there was nothing that actually removed .hgsubstate from the 'cd' or 'dc' lists. This meant that the file would eventually make its way into the 'mergeactions' list, now freshly augmented with 'cd' and 'dc' actions. We call subrepo.submerge for both 'g' actions and merge actions. This means that if the resolution to an .hgsubstate change/delete conflict was to add it to the 'g' list, subrepo.submerge would be called twice. It turns out that this doesn't cause any adverse effects on Linux due to caching, but apparently breaks on other operating systems including Windows. The fix here moves this to before we convert the actions over. This ensures that it .hgsubstate doesn't make its way into multiple lists. The real fix here is going to be: (1) move .hgsubstate conflict resolution into the resolve layer, and (2) use a real data structure for the actions rather than shuffling data around between lists and dictionaries: we need a hash (or prefix-based) index by file and a list index by action type. There's a very tiny behavior change here: collision detection on case-insensitive systems will happen after this is resolved, not before. I think this is the right change -- .hgsubstate could theoretically collide with other files -- but in any case it makes no practical difference. Thanks to Yuya Nishihara for investigating this.

bookmarks: improve documentation for --rev option

merge: undocument checkunknown and checkignored configs for 3.7 We've discovered an issue with this flag during certain kinds of rebases. When: (1) we're rebasing while currently on the destination commit, and (2) an untracked or ignored file F is currently in the working copy, and (3) the same file F is in a source commit, and (4) F has different contents in the source commit, then we'll try to merge the file rather than overwrite it. An earlier patch I sent honored the options for these situations as well. Unfortunately, rebases go through the same flow as the old, deprecated 'hg merge --force'. We'd rather not make any changes to 'hg merge --force' behavior, and there's no way from this point in the code to figure out whether we're in 'hg rebase' or 'hg merge --force'. Pierre-Yves David and I came up with the idea to split the 'force' flag up into 'force' for rebases, and 'forcemerge' for merge. Since this is a very disruptive change and we're in freeze mode, simply undocument the options for this release so that our hands aren't tied by BC concerns. We'll redocument them in the next release.

commands: advance current active bookmark at pull --update correctly Before this patch, "hg pull --update" doesn't advance current active bookmark correctly, if pulling itself doesn't advance it, even though "hg pull" + "hg update" does so. Existing test for "pull --update works the same as pull && update" in test-bookmarks.t doesn't examine this case, because pulling itself advance current active bookmark before actual updating the working directory in that test case. To advance current active bookmark at "hg pull --update" correctly, this patch examines 'movemarkfrom' instead of 'not checkout'. Even if 'not checkout' at the invocation of postincoming(), 'checkout' is overwritten by "the revision to update to" value returned by destutil.destupdate() in such case. Therefore, 'not checkout' condition means "update destination is revision #0", and isn't suitable for examining whether active bookmark should be advanced. Even though examination around "movemarkfrom == repo['.'].node()" may seem a little redundant just for this issue, this makes it easier to compare (and unify in the future, maybe) with the same logic to update bookmark at "hg update" below. if not ret and movemarkfrom: if movemarkfrom == repo['.'].node(): pass # no-op update elif bookmarks.update(repo, [movemarkfrom], repo['.'].node()): ui.status(_("updating bookmark %s\n") % repo._activebookmark) else: # this can happen with a non-linear update ui.status(_("(leaving bookmark %s)\n") % repo._activebookmark) bookmarks.deactivate(repo)

largefiles: prevent committing a missing largefile Previously, if the largefile was deleted at the time of a commit, the standin was silently not updated and its current state (possibly garbage) was recorded. The test makes it look like this is somewhat of an edge case, but the same thing happens when an `hg revert` followed by `rm` changes the standin. Aside from the second invocation of this in lfutil.updatestandinsbymatch() (which is what triggers this test case), the three other uses are guarded by dirstate checks for added or modified, or an existence check in the filesystem. So aborting in lfutil.updatestandins() should be safe, and will avoid silent skips in the future if this is used elsewhere.

changegroup: fix treemanifest exchange code (issue5061) There were two mistakes: one was accidental reuse of the fclnode variable from the loop gathering file nodes, and the other (masked by that bug) was not correctly handling deleted directories. Both cases are now fixed and the test passes.

log: speed up single file log with hidden revs (issue4747) On repos with lots of heads, the filelog() code could spend several minutes decompressing manifests. This change instead tries to efficiently scan the changelog for candidates and decompress as few manifests as possible. This is a regression introduced in 3.3 by the linkrev adjustment code. Prior to that, filelog was nearly instant. For the repo in the bug report, this improves time of a simple log command from ~3 minutes to ~.5 seconds, a 360x speedup. For the main Mercurial repo, a log of commands.py slows down from 1.14s to 1.45s, a 27% slowdown. This is still faster than the file() revset, which takes 2.1 seconds.

largefiles: report the missing file count after a commit that does nothing This is the same warning that is printed for normal files.

commit: factor the post commit status check into a cmdutil method The largefiles extension needs to set lfstatus for this status call. Otherwise, if a missing largefile is explicitly named, a confusing message is issued that says the largefile wasn't found, followed by another that says nothing changed.

largefiles: fix an explicit largefile commit after a remove (issue4969) The change in b68797f244e4 to handle a normal -> largefile switch was too aggressive in preserving the original matcher names. If a largefile is explicitly provided by the user, but only the standin exists in dirstate, then only the standin can be committed. There's still maybe an issue when the largefile is deleted outside of Mercurial: $ rm large $ hg ci -m "oops" large large: The system cannot find the file specified nothing changed [1]

context: back out sneaky code change in documentation change In 81b391a45264 (context: clarify why we don't compare file contents when nodeid differs, 2016-01-12), I also changed "node2 != _newnode" into "self.rev() is not None". I don't remember why. They are similar, but the former also catches the case where the file is clean in the dirstate (so node2 is not _newnode), but different from the "other" context. This resulted in unnecessary file content comparison a few lines further down in the code. Let's just back out the code change. Thanks to Durham Goode for spotting this.

templater: abort if infinite recursion detected while compiling In this case, a template is parsed recursively with no thunk for lazy evaluation. This patch prevents recursion by putting a dummy of the same name into a cache that will be referenced while parsing if there's a recursion. changeset = {files % changeset}\n ~~~~~~~~~ = [(_runrecursivesymbol, 'changeset')]

templater: abort if infinite recursion detected while evaluation (issue4758) It would be nice if we could detect recursion at the parsing phase, but we can't because a template can refer to a keyword of the same name. For example, "rev = {rev}" is valid if rev is a keyword, and we don't know if rev is a keyword or a template while parsing.

exchange: set 'treemanifest' param on pushed changegroups too In 5c0fd878779c (treemanifests: set bundle2 part parameter indicating treemanifest, 2016-01-08), I didn't realize I had to set the parameter separately for getbundle and unbundle. Having the parameter there on push allows us to push to an empty repo and have the requirements updated correctly.

crecord: fix help bar display issue (issue5063) Before this patch, the help bar in crecord wouldn't be printed correctly when the terminal window didn't have enough column to display it. This patch adds logic to make sure that the help bar message is always displayed. We use an ellipsis when it is not possible to display the complete message.

crecord: fix typo in the help text In the crecord help dialog, the toggle all option was wrongfully documented. Instead of using 'a', one must use 'A' to toggle all the hunks. The crecord header that is always displayed on the screen contains the right shortcut and does not need to be changed.

subrepo: better error messages in _ensuregit This patch improves the error messages raised when an OSError occurs, since simply re-raising the exception can be both confusing and misleading. For example, if "hg identify" is run inside a repository that contains a Git subrepository and the git binary could not be found, it'll exit with the message "abort: No such file or directory". That implies "identify" has a problem reading the repository itself. There's no way for the user to know what the real problem is unless they dive into the Mercurial source, which is what I ended up doing after spending hours debugging errors while provisioning a VM with Ansible (turns out I forgot to install Git on it). Descriptive errors are especially important on Windows, since it's common for Windows users to forget to set the "Path" system variable after installing Git.

hgweb: update canvas.width before dynamically redrawing graph (issue2683) After 91ac8cb79125 graph canvas width is decided once on the initial rendering. However, after graph page gets scrolled down to load more, it might need more horizontal space to draw, so it needs to resize the canvas dynamically. The exact problem that this patch solves can be seen using: hg init testfork cd testfork echo 0 > foo hg ci -Am0 echo 1 > foo hg ci -m1 hg up 0 echo 2 > foo hg ci -m2 hg gl -T '{rev}\n' @ 2 | | o 1 |/ o 0 hg serve And then by navigating to http://127.0.0.1:8000/graph/tip?revcount=1 "revcount=1" makes sure the initial graph contains only revision 2. And because the initial canvas width takes only that one revision into count, after the (immediate) AJAX update revision 1 will be cut off from the graph. We can safely set canvas width to the new value we get from the AJAX request because every time graph is updated, it is completely redrawn using all the requested nodes (in the case above it will use /graph/2?revcount=61), so the value is guaranteed not to decrease. P.S.: Sorry for parsing HTML with regexes, but I didn't start it.

run-tests: "fix" race condition in race condition fix Laurent's commit 3203dfe341f9 still suffers from a race: by the time the "job" function tries to assign to channels[channel], that list has been truncated to empty. The result is that every job thread raises an IndexError. Earlier, I tried an approach of correctly locking channels, but that caused run-tests to hang on KeyboardInterrupt sometimes. This approach is strictly hackier, but seems to actually work reliably.

rebase: restore help for rebase w/o args (issue5059) Restoring documentation accidentally removed in a9a047878e14.

shelve: use cg3 for treemanifests Similar to previous change, this teaches shelve to pick the right changegroup version for repos that use treemanifests.

repair: use cg3 for treemanifests The newly created helper changegroup.safeversion() knows to pick version 03 if the repo uses treemanifests, so just using that means we pick the right changegroup version.

changegroup: introduce safeversion() In a few places (at least repair.py and shelve.py), we want to find the best changegroup version that we can assume users of the repo will understand. For example, we choose version 01 by default, but if it's a generaldelta repo, we expect clients to support version 02 anyway, so we choose that for new bundles (for e.g. "hg strip"). Let's create a helper for this functionality in changegroup, so we can reuse it elsewhere later.

changegroup: don't support versions 01 and 02 with treemanifests Since it would be terribly expensive to convert between flat manifests and treemanifests, we have decided to simply not support changegroup version 01 and 02 with treemanifests. Therefore, let's stop announcing that we support these versions on treemanifest repos. Note that this means that older clients that try to clone from a treemanifest repo will fail. What happens is that the server, after this patch, finds that there are no common versions and raises "ValueError: no common changegroup version". This results in "abort: HTTP Error 500: Internal Server Error" on the client. Before this patch, it was no better: The server would instead find that there were directory manifest nodes to put in the changegroup 01 or 02 and raise an AssertionError on changegroup.py#668 (assert not tmfnodes), which would also appear as a 500 to the client.

run-tests: fix crash when --json and --blacklist are both used (issue5050) This patch fixes a crash when both --json and --blacklist were given as arguments of run-tests.py. Now, instead of crashing, we add an entry for blacklisted tests in the json output to show that the tests were skipped.

run-tests: fix race condition Before this patch, it was possible for run-tests to crash on a race condition. The race condition happens in the following case: - the last test finishes and calls: done.put(None) - the context switches to the main thread that clears the channels list - the context switches to the last test mentioned above, it tries to access channels[channel] and crashes This happened to me while running run-tests. This patch fixes the issue by clearing the channel before considering that the test is done.

copyright: update to 2016

transaction: abort transaction during hook exception The new transaction context did not handle the case where an exception during close should still call release. This cause pretxnclose hooks that failed to cause the transaction to fail without aborting, thus requiring a hg recover. I've added a test.

Added signature for changeset 158bdc896572

Added tag 3.7-rc for changeset 158bdc896572

shelve: lowercase flag description The help for --unknown is the *only* command that started with a capital letter

changegroup: cg3 has two empty groups *after* manifests changegroup.getchunks() determines the end of the stream by looking for an empty chunk group (two consecutive empty chunks). It ignores empty groups in the first two groups. Changegroup 3 introduced an empty chunk between the manifests and the files, which confuses getchunks(). Since it comes after the first two, getchunks() will stop there. Fix by rewriting getchunks so it first counts two groups (empty or not) and then keeps antostarts counting empty groups. With this counting, changegroup 1 and 2 have exactly one empty group after the first two groups, while changegroup 3 has two (one for directories and one for files). It's a little hard to test this at this point, but I have verified that this patch fixes narrowhg (which was broken before this patch). Also, future patches will fix "hg strip" with treemanifests, and once that's done, getchunks() will be tested through tests of "hg strip".

mq: check for reserved patch name with qimport -r (issue5033) Fix regression from 143b52fce68e. Catching aborts might not be pretty but it works and is a small change.

mq: refactor makepatchname into class method

repoview: fix corrupted hiddencache crash Mercurial (issue5042) Before this patch if the hiddencache existed but was empty, it would crash mercurial. This patch adds exception handling when reading the hiddencache to avoid the issue. When encountering a corrupted cache file we print a devel warning. There would be no point in issuing a normal warning as the user wouldn't be able to do anything about the situation. The warning looks like: devel-warn: corrupted hidden cache, removing it at: /path/to/repoview.py

repoview: add missing newline character in debug prints

commandserver: drop tell() and seek() from channels (issue5049) These operations are obviously invalid for file-like channels because they will read or write protocol headers. This patch works around the issue that "hg archive" generates a corrupted zip file on Windows commandserver because of unusable tell() implementation. But the problem still occurs without using a commandserver. $ hg archive -R not-small-repo -t zip - | cat > invalid.zip So, this patch cannot fix the issue5049 completely.

crecord: edit during hg crecord should preserve cursor position (issue5041) This patch adds a variable to keep track of what hunk was selected before the edit. We use that variable to select the hunk or its replacement after the edit.

templates: use canvaswidth instead of fixed width for canvas (issue2683) Before this patch, template files for "graph" web page use fixed width size "480" for canvas element. This causes pruned lanes and invisible vertexes, if there are 16 or more vertical lanes at once. In such case, part of graph in right side area over 480 is invisible, even though corresponded summary text blocks are visible correctly. This limitation isn't reasonable for workflow using many branches at once (e.g. "one branch per issue" workflow). There were changes below related to width of canvas: - 7359cb753a54 (templates: widen the graph canvas (issue2683)), released as a part of Mercurial 1.8.2 According to the description, this assumed that 15 parallel branches was enough for ordinary workflow, and bumped width of canvas up from 224 to 480. - d490edc71146 (hgweb: make graph data suitable for template usage), released as a part of Mercurial 2.3 This introduced "canvaswidth" template keyword as a part of refactoring around graph rendering. But 'width="480"' of canvas element in template files wasn't replaced by 'width="{canvaswidth}"' in it (or subsequent one). This patch uses dynamic value "{canvaswidth}" instead of fixed width size "480" for canvas element. This is posted for "stable", because: - this is re-fixing issue2683 - this is simple enough for stable - using "{canvaswidth}" doesn't require any additional cost Calculation of canvaswidth is already implied as a part of "graph" web command.

backout: fix --no-commit option (issue5054)

bundle: exit early when there are no commits to bundle Previously, if you passed a revset that resolved to no nodes, it would get interpreted by the changegroup discovery logic as 'bundle all my heads', which is not what the user asked. Let's exit early when we notice this case. It could be argued that the changeset discovery logic should be smarter and only assume 'all heads' if the incoming heads parameter is None, but that's a much riskier change.

zeroconf: access repo on hgweb_mod properly (issue5036) hgweb_mod.hgweb.repo disappeared in ae33fff17c1e (hg: establish a cache for localrepository instances) and the code for accessing repo instances from hgweb was later refactored to go through a cache-aware context manager. Adapt zeroconf to access the repo instance via the new API.

merge default into stable for 3.7 code freeze

shelve: permit shelves to contain unknown files If an emergency comes in while you're in the middle of an experimental change, it can be useful to shelve not just files hg already tracks but also your unknown files while you handle the emergency. This is especially true if you have hooks intended to prevent you from forgetting to add new code before you push. Teach "hg shelve" to optionally shelve unknown files, not just tracked files. This is functionally similar to --addremove, but with two differences: 1) Deleted files are not removed. 2) Files added during shelve creation are tracked in extra so that they can be forgotten by "hg unshelve". When unshelving, we take care to only forget files if they've been created during the unshelve operation; if you add a file that's being tracked in a shelve as an unknown file, it should not become unknown again when the shelve is unshelved.

localrepo: don't reference transaction from hook closure (issue5043) Before, the hook() closure (which is called as part of locking hooks) would maintain a reference to a transaction instance (which should be finalized by the time lock hooks are called). Because we accumulate hook() instances when there are multiple transactions per lock, this would result in holding references to the transaction instances which would lead to higher memory utilization. Creating a reference to the hook arguments dict minimizes the number of objects that are kept alive until the lock release hook runs, minimizing memory "leaks."

context: don't use util.cachefunc due to cycle creation (issue5043) util.cachefunc stores all arguments as the cache key. For filectxfn functions, the arguments include the memctx instance. This creates a cycle where memctx._filectxfn references self. This causes a memory leak. We break the cycle by implementing our own memoizing function that only uses the path as the cache key. Since each memctx has its own cache instance, there is no concern about invalid cache hits.

largefiles: actions will now always have a file - drop check

largefiles: make prompt order deterministic 42ae1b1f048f introduced iteration of a set. Make it stable.