Wed, 16 Nov 2011 03:45:14 +0100 tests: add missing 'hghave unix-permissions'
Mads Kiilerich <mads@kiilerich.com> [Wed, 16 Nov 2011 03:45:14 +0100] rev 15516
tests: add missing 'hghave unix-permissions'
Wed, 16 Nov 2011 03:45:14 +0100 tests: remove hacks for testing if file or directory exists
Mads Kiilerich <mads@kiilerich.com> [Wed, 16 Nov 2011 03:45:14 +0100] rev 15515
tests: remove hacks for testing if file or directory exists
Wed, 16 Nov 2011 03:45:06 +0100 tests: don't leave temporary directories without write permission behind
Mads Kiilerich <mads@kiilerich.com> [Wed, 16 Nov 2011 03:45:06 +0100] rev 15514
tests: don't leave temporary directories without write permission behind
Thu, 17 Nov 2011 16:53:17 -0600 merge with stable
Matt Mackall <mpm@selenic.com> [Thu, 17 Nov 2011 16:53:17 -0600] rev 15513
merge with stable
Wed, 16 Nov 2011 08:34:36 +0100 hook: flush stdout before redirecting to stderr stable
Thomas De Schampheleire <thomas.de.schampheleire@gmail.com> [Wed, 16 Nov 2011 08:34:36 +0100] rev 15512
hook: flush stdout before redirecting to stderr When hook output redirection is enabled (e.g. when cloning over ssh), hook output on stdout is redirected to stderr, to prevent the repository data on stdout from being corrupted. In certain cases, the redirection could cause part of the repository data to end up on stderr as well. In case of a clone, this causes: "abort: consistency error in delta!" This was seen with a clone over ssh, an outgoing hook present (any non-python type, e.g. 'pwd'), on certain repositories only, probably depending on the distribution of the sent data) This patch updates the hook redirection code to flush stdout before redirecting, removing the problem.
Wed, 16 Nov 2011 12:53:10 +0100 import: fix parent selection when importing merges stable
Patrick Mezard <pmezard@gmail.com> [Wed, 16 Nov 2011 12:53:10 +0100] rev 15511
import: fix parent selection when importing merges With "wp1" and "wp2" the current working directory parents, "p1" and "p2" the patch parents and "parents" the resulting commit parents, the current behaviour is: --bypass --exact p2 parents 0 0 0 [wp1, wp2] 0 0 1 [wp1, wp2]/buggy 0 1 0 [p1] 0 1 1 [p1, p2] 1 0 0 [wp1, wp2] 1 0 1 [p1, p2] 1 1 0 [p1] 1 1 1 [p1, p2] The original behaviour before f53dc0787424 was: --bypass --exact p2 parents 0 0 0 [wp1, wp2] 0 0 1 if p1 == wp1 then [p1, p2] otherwise [wp1, wp2] 0 1 0 [p1] 0 1 1 [p1, p2] This patch restores the previous behaviour when --bypass is not set, and align --bypass behaviour when --exact is not set with merge diffs.
Mon, 14 Nov 2011 18:16:01 +0100 patch: simplify hunk extents parsing
Patrick Mezard <pmezard@gmail.com> [Mon, 14 Nov 2011 18:16:01 +0100] rev 15510
patch: simplify hunk extents parsing Do not capture unwanted groups in regexps
Sun, 13 Nov 2011 21:37:14 +0100 diff: --ignore-blank-lines was too enthusiastic stable
Patrick Mezard <pmezard@gmail.com> [Sun, 13 Nov 2011 21:37:14 +0100] rev 15509
diff: --ignore-blank-lines was too enthusiastic It was ignoring changes from: ab to: a b
Sat, 12 Nov 2011 14:00:25 +0100 graft: disallow grafting grafted csets in specific situations (issue3091) stable
Stefano Tortarolo <stefano.tortarolo@gmail.com> [Sat, 12 Nov 2011 14:00:25 +0100] rev 15508
graft: disallow grafting grafted csets in specific situations (issue3091) In particular, we do not allow: - grafting an already grafted cset onto its original branch - grafting already grafted csets with the same origin onto each other
Sat, 12 Nov 2011 11:23:52 +0100 graft: use revs to make tests more readable stable
Stefano Tortarolo <stefano.tortarolo@gmail.com> [Sat, 12 Nov 2011 11:23:52 +0100] rev 15507
graft: use revs to make tests more readable
Sat, 12 Nov 2011 13:15:40 +0100 graft: preserve original source in subsequent grafts stable
Stefano Tortarolo <stefano.tortarolo@gmail.com> [Sat, 12 Nov 2011 13:15:40 +0100] rev 15506
graft: preserve original source in subsequent grafts
Sun, 13 Nov 2011 00:29:26 +0000 makedate: wrong timezone offset if DST rules changed this year (issue2511) stable
Dmitry Panov <dop@itoolabs.com> [Sun, 13 Nov 2011 00:29:26 +0000] rev 15505
makedate: wrong timezone offset if DST rules changed this year (issue2511) Python's time module sets timezone and altzone based on UTC offsets of two dates: first and middle day of the current year. This approach doesn't work on a year when DST rules change. For example Russia abandoned winter time this year, so the correct UTC offset should be +4 now, but time.timezone returns 3 hours difference because that's what it was on 01.01.2011. Related python issue: http://bugs.python.org/issue1647654
Thu, 17 Nov 2011 15:44:37 -0600 posix: fix findexe() to check for file type and access
Marc-Antoine Ruel <maruel@google.com> [Thu, 17 Nov 2011 15:44:37 -0600] rev 15504
posix: fix findexe() to check for file type and access
Tue, 15 Nov 2011 02:44:55 +0100 forget: use forward slashes for internal paths
Mads Kiilerich <mads@kiilerich.com> [Tue, 15 Nov 2011 02:44:55 +0100] rev 15503
forget: use forward slashes for internal paths forget into a subrepo failed on windows because pathes were joined with \.
Fri, 11 Nov 2011 01:25:47 +0100 check-code: add --nolineno option for hiding line numbers
Mads Kiilerich <mads@kiilerich.com> [Fri, 11 Nov 2011 01:25:47 +0100] rev 15502
check-code: add --nolineno option for hiding line numbers This makes the output more stable when it is used as a whitelist.
Wed, 16 Nov 2011 18:04:19 -0600 merge: give a special message for internal:merge failure (issue3105)
Matt Mackall <mpm@selenic.com> [Wed, 16 Nov 2011 18:04:19 -0600] rev 15501
merge: give a special message for internal:merge failure (issue3105)
Sat, 12 Nov 2011 02:08:01 +0100 setup: raise when executing with python3 without c2to3 argument
Simon Heimberg <simohe@besonet.ch> [Sat, 12 Nov 2011 02:08:01 +0100] rev 15500
setup: raise when executing with python3 without c2to3 argument
Wed, 16 Nov 2011 17:55:32 -0600 posix: fix findexe() to check for file type and access stable
Marc-Antoine Ruel <maruel@google.com> [Wed, 16 Nov 2011 17:55:32 -0600] rev 15499
posix: fix findexe() to check for file type and access
Tue, 15 Nov 2011 02:16:30 +0100 subrepo: use correct paths for subrepos with ..-relative paths on windows stable
Mads Kiilerich <mads@kiilerich.com> [Tue, 15 Nov 2011 02:16:30 +0100] rev 15498
subrepo: use correct paths for subrepos with ..-relative paths on windows posixpath normpath of c:\foo\bar/../baz is baz, so now we pconvert first.
Fri, 11 Nov 2011 01:07:10 +0100 add missing localization markup stable
Mads Kiilerich <mads@kiilerich.com> [Fri, 11 Nov 2011 01:07:10 +0100] rev 15497
add missing localization markup
Wed, 16 Nov 2011 00:10:56 +0100 url: handle file://localhost/c:/foo "correctly" stable
Mads Kiilerich <mads@kiilerich.com> [Wed, 16 Nov 2011 00:10:56 +0100] rev 15496
url: handle file://localhost/c:/foo "correctly" The path was parsed correctly, but localpath prepended an extra '/' (as in '/c:/foo') because it assumed it was an absolute unix path.
Wed, 16 Nov 2011 00:10:52 +0100 help: it is 'file://localhost/', not 'file://local/' stable
Mads Kiilerich <mads@kiilerich.com> [Wed, 16 Nov 2011 00:10:52 +0100] rev 15495
help: it is 'file://localhost/', not 'file://local/' The documentation has apparently always been wrong.
Sun, 21 Aug 2011 15:23:43 +0200 setup: support executing with python3 including 2to3
Simon Heimberg <simohe@besonet.ch> [Sun, 21 Aug 2011 15:23:43 +0200] rev 15494
setup: support executing with python3 including 2to3 Merge the code from contrib/setup3.py in setup. The argument for executing is marked as experimental. Reason: The file in contrib was outdated (packages, cmdclass, ...)
Tue, 01 Nov 2011 20:13:53 +0100 setup: hgbuildmo inherits from Command
Simon Heimberg <simohe@besonet.ch> [Tue, 01 Nov 2011 20:13:53 +0100] rev 15493
setup: hgbuildmo inherits from Command hgbuildmo does not need anything provided by the build class.
Sat, 12 Nov 2011 02:07:55 +0100 setup: make script executable with python3
Simon Heimberg <simohe@besonet.ch> [Sat, 12 Nov 2011 02:07:55 +0100] rev 15492
setup: make script executable with python3 Replace the incompatible print statement. Writing a warning to stderr is a good idea anyway.
Wed, 17 Aug 2011 08:55:01 -0500 bookmark: remove excess creation of changectx's
Kevin Bullock <kbullock@ringworld.org> [Wed, 17 Aug 2011 08:55:01 -0500] rev 15491
bookmark: remove excess creation of changectx's
Wed, 17 Aug 2011 08:49:40 -0500 bookmark: same order for options and code
Kevin Bullock <kbullock@ringworld.org> [Wed, 17 Aug 2011 08:49:40 -0500] rev 15490
bookmark: same order for options and code
Tue, 15 Nov 2011 14:33:06 -0600 merge with stable
Matt Mackall <mpm@selenic.com> [Tue, 15 Nov 2011 14:33:06 -0600] rev 15489
merge with stable
Tue, 15 Nov 2011 14:25:11 -0600 dirstate: fix case-folding identity for traditional Unix stable
Matt Mackall <mpm@selenic.com> [Tue, 15 Nov 2011 14:25:11 -0600] rev 15488
dirstate: fix case-folding identity for traditional Unix We used to use os.path.normcase which was a no-op, which was unhelpful for cases like VFAT on Linux.
Tue, 15 Nov 2011 17:16:17 +0100 convert/bzr: fix test of divergent nested renames for bzr 1.x stable
Thomas Arendsen Hein <thomas@intevation.de> [Tue, 15 Nov 2011 17:16:17 +0100] rev 15487
convert/bzr: fix test of divergent nested renames for bzr 1.x 54c0517c0fe8 introduced a new block in test-convert-bzr-directories.t which produces a slightly different output with older bzr versions. Tested with bzr 1.5 on Debian lenny.
(0) -10000 -3000 -1000 -300 -100 -50 -30 +30 +50 +100 +300 +1000 +3000 +10000 +30000 tip