largefiles: remove confusing rev parameter for lfdirstatestatus Dirstate only works on the repo wctx.

largefiles: replace repo._isaddremove hack with a simple function parameter

status: add more complete tests for --rev The 'status --rev' code is not very well tested, which has bitten us as recently as in issue4321. Let's add some more tests, some of which uncover bugs. Remove the few existing tests that are now covered in a more thorough and consistent way.

cmdserver: include pid of server handling requests in hello message Because unix-mode server forks child process per connection, client does not know the pid of the server that will handle requests. The pid is necessary to interrupt hung process: 1. client connects to socket server 2. server accepts the connection, forks, and tells pid 3. client requests "runcommand pull" .. hung .. 4. client sends SIGINT to the (forked) server 5. server returns from I/O wait Note that getsockopt(SO_PEERCRED) of Linux cannot be used because the server fork()s after accept().

run-tests: clean up unused globals that were removed by tests-refactor series They were demoted to instance variables by cb88d4a04f58, 1ad7aabba14e, 93511a595766, 2e1aa8c1ee37, 8e7b0f4d6ac7 and 02087bc4f143.

docker: use official centos5 image I guess it didn't exist when centos5 support was introduced.

docker: add centos7 target for CentOS / Red Hat 7 support

lock: while releasing, unlink lockfile even if the release function throws Consider a hypothetical bug in the release function that causes it to raise an exception. Also consider the bisect command, which saves its state in a finally clause. Saving the state requires acquiring the wlock. If we don't unlink the lockfile when the exception is thrown, we'll try to acquire the wlock again. We're going to try and acquire a lock again while our old lockfile is on disk. The PID on disk is our own, and of course we're still running, so we won't take over the lock. Hence we'll be stuck waiting for a lock that we left behind ourselves. To avoid this, always unlink the lockfile. This preserves the invariant that self.held > 0 is equivalent to the lockfile existing on disk.

i18n: cache the result of every gettext call In looking at profiler output for 'hg log' on mozilla-central, I noticed we spent a _huge_ amount of time in gettext relative to what it's doing. Caching provides a roughly 15% performance improvement even on repositories as small as hg. == hg repo on linux == Before: % cumulative self time seconds seconds name 5.05 0.19 0.19 i18n.py:62:gettext 4.84 0.18 0.18 revlog.py:88:decompress 2.95 0.17 0.11 changelog.py:201:node 2.32 0.09 0.09 ui.py:577:write 2.11 0.08 0.08 i18n.py:72:gettext 2.11 0.08 0.08 obsolete.py:196:_fm0readmarkers 1.89 0.07 0.07 obsolete.py:569:_load 1.68 0.63 0.06 localrepo.py:29:__get__ real 0m4.026s user 0m3.993s sys 0m0.034s After: % cumulative self time seconds seconds name 8.05 0.26 0.26 revlog.py:88:decompress 2.68 0.22 0.09 color.py:395:write 2.20 0.07 0.07 obsolete.py:196:_fm0readmarkers 1.95 0.06 0.06 obsolete.py:174:_fm0readmarkers 1.95 0.06 0.06 ui.py:577:write 1.95 0.06 0.06 util.py:1228:datestr 1.71 0.06 0.06 utf_8.py:16:decode 1.71 0.06 0.06 revlog.py:273:__len__ real 0m3.519s user 0m3.447s sys 0m0.073s == mozilla-central repo on linux == Before: % cumulative self time seconds seconds name 7.72 2.35 2.35 revlog.py:88:decompress 4.46 1.36 1.36 i18n.py:62:gettext 2.22 0.67 0.67 i18n.py:72:gettext 2.19 1.14 0.67 changelog.py:201:node 2.16 0.66 0.66 ui.py:577:write 1.96 0.60 0.60 utf_8.py:16:decode 1.93 1.97 0.59 color.py:395:write 1.85 0.81 0.56 changelog.py:136:tip real 0m30.822s user 0m30.660s sys 0m0.149s After: % cumulative self time seconds seconds name 9.82 2.49 2.49 revlog.py:88:decompress 2.67 1.31 0.68 localrepo.py:29:__get__ 2.57 0.65 0.65 utf_8.py:16:decode 2.48 1.01 0.63 changelog.py:201:node 2.10 0.82 0.53 changelog.py:136:tip 2.01 0.51 0.51 ui.py:577:write 1.91 0.49 0.49 util.py:1232:datestr 1.85 1.65 0.47 color.py:395:write real 0m25.619s user 0m25.446s sys 0m0.166s == cpython repo on os x = Before: % cumulative self time seconds seconds name 5.05 1.35 1.35 cmdutil.py:982:_show 4.59 1.22 1.22 revlog.py:274:__len__ 3.98 1.06 1.06 i18n.py:62:gettext 3.91 1.04 1.04 revlog.py:1016:revision 3.68 0.98 0.98 revlog.py:337:parents 3.45 0.92 0.92 revlog.py:88:decompress 2.91 0.78 0.78 revlog.py:309:rev 2.62 0.70 0.70 revlog.py:1033:revision real 0m30.414s user 0m28.145s sys 0m0.541s After: % cumulative self time seconds seconds name 7.98 1.66 1.66 cmdutil.py:982:_show 6.83 1.42 1.42 changelog.py:46:decodeextra 5.18 1.08 1.08 revlog.py:274:__len__ 3.94 0.82 0.82 revlog.py:1016:revision 3.41 0.71 0.71 revlog.py:309:rev 3.32 0.69 0.69 revlog.py:88:decompress 2.99 0.63 0.62 revlog.py:1033:revision 2.69 0.56 0.56 revlog.py:341:start real 0m22.811s user 0m21.883s sys 0m0.397s

util.system: avoid buffering of subprocess output when it is piped util.system() copies subprocess' output through pipe if output file is not stdout. Because a file iterator has internal buffering, output won't be flushed until enough data is available. Therefore, it could easily miss important messages such as "waiting for lock".

bundle2: client side support for a part to import external bundles Bundle2 opens doors to advanced features allowing to reduce load on mercurial servers, and improve clone experience for users on unstable or slow networks. For instance, it could be possible to pre-generate a bundle of a repository, and give a pointer to it to clients cloning the repository, followed by another changegroup with the remainder. For significantly big repositories, this could come as several base bundles with e.g. 10k changesets, which, combined with checkpoints (not part of this change), would prevent users with flaky networks from starting over any time their connection fails. While the server-side support for those features doesn't exist yet, it is preferable to have client-side support for this early-on, allowing experiments on servers only requiring a vanilla client with bundle2 enabled.

bundle2: remove _getbundleextrapart Extensions can now add new part generators with the getbundle2partsgenerator decorator instead.

glossary: add deprecated and experimental

test-merge5: remove obsolete '-y' and its motivating comment The '-y' in 'hg update -y' was once needed to answer questions about modify/delete conflicts. That is no longer needed, so remove the '-y' and the comment justifying its use.

test-resolve.t: use redirection to /dev/null instead of grep -q

resolve: run happily after conflict-free merge

test-resolve: add tests for re-merge

test-resolve: add more tests for in conflict-free states We already have a test for 'hg resolve -m' when there is no merge in progress. Add one for 'hg resolve --all' as well. Also add tests for both --all and -m when there is a merge without conflicts in progress. They should both be successful, just as if there had been conflicts that had been marked resolved. However, that is currently broken, so mark the tests broken for now. The behavior will be fixed in a later patch.

test-resolve: add test resolving one of two files The tests for resolve are missing a lot of cases. Let's start by adding another file to the test repo, so we can test resolving one of two files.

test-resolve: clarify test descriptions and consistently use "should"

revset-phases: prefetch attributes in phasesrelated revsets Pre-fetching attributes gives a significant performance boost. Such is Python. draft() 0) wall 0.011661 comb 0.010000 user 0.010000 sys 0.000000 (best of 205) 1) wall 0.009804 comb 0.000000 user 0.000000 sys 0.000000 (best of 231) draft() - ::bookmark() 0) wall 0.014173 comb 0.010000 user 0.010000 sys 0.000000 (best of 177) 1) wall 0.012966 comb 0.010000 user 0.010000 sys 0.000000 (best of 182)

revset-phases: do not cache phase-related filters The phase retrieval is fast enough to not require caching the result of the functions. draft() 0) wall 0.017209 comb 0.020000 user 0.020000 sys 0.000000 (best of 149) 1) wall 0.011654 comb 0.010000 user 0.010000 sys 0.000000 (best of 186) public() 0) wall 0.018687 comb 0.010000 user 0.010000 sys 0.000000 (best of 128) 1) wall 0.013290 comb 0.010000 user 0.010000 sys 0.000000 (best of 181) secret() 0) wall 0.017464 comb 0.020000 user 0.020000 sys 0.000000 (best of 127) 1) wall 0.011499 comb 0.000000 user 0.000000 sys 0.000000 (best of 196) draft() - ::bookmark() 0) wall 0.020099 comb 0.020000 user 0.020000 sys 0.000000 (best of 127) 1) wall 0.014399 comb 0.020000 user 0.020000 sys 0.000000 (best of 169)

changectx: issue a FilteredRepoLookupError when applicable We capture FilteredxxxError and issue a FilteredRepoLookupError instead with a sightly different messsge. The message will likely get more improvement in the future. error: filtered revision '4'

repoview: add a FilteredRepoLookupError This exception is a more precise RepoLookupError that will allow us to issue a special message when we end up accessing a filtered revision.

repoview: add a FilteredLookupError class This exception is a more precise LookupError that will allow us to issue a special message when we end up accessing a filtered revision.

repoview: add a FilteredIndexError class This exception is a more precise IndexError that will allow us to issue a special message when we end up accessing a filtered revision.

changectx: move `IndexError` handling in the top level try except This one can be handled by the top level catching.

changectx: wrap the `changeid` processing in a try/except We are going to introduce more precise exception classes for filtered nodes. So we will have to upgrade them to the `RepoLookupError` level here. We wrap the whole thing into a try/except to ease this future catching. Some of the current exception catching will be moved in this one. But the current changeset focuses on code movement only.

bundle2: detect and disallow a negative chunk size We have no usage planned for 2/3 of them and the support for the planned usecase is not here yet. So we raise a BundleValueError when encountered

bundle2: add an UnsupportedPartError We need the BundleValueError for format errors not related to part support. So we add a specific class for part-support errors.

bundle2: change header size and make them signed (new format) We are changing all integers that denote the size of a chunk to read to int32. There are two main motivations for that. First, we change everything to the same width (32 bits) to make it possible for a reasonably agnostic actor to forward a bundle2 without any extra processing. With this change, this could be achieved by just reading int32s and forwarding chunks of the size read. A bit a smartness would be logic to detect the end of stream but nothing too complicated. Second, we need some capacity to transmit special information during the bundle processing. For example we would like to be able to raise an exception while a part is being read if this exception happend while this part was generated. Having signed integer let us use negative numbers to trigger special events during the parsing of the bundle. The format is renamed for B2X to B2Y because this breaks binary compatibility. The B2X format support is dropped. It was experimental to allow this kind of things. All elements not directly related to the binary format remain flagged "b2x" because they are still compatible.

bundle2: extract processing of part into its own function This is code movement only. This will be useful to have it separated for reuse purposes. We plan to introduce a new feature to the bundle format that allow inserting a part in the middle of another part payload. This will be useful to transmit a exception raised during a part generation.

bundle2: add a test for exceptions raised during the generation process We would like exceptions raised during the generation process to be gracefully handled on the receiver side. We add a test for it. It shows that we are not doing it yet.

dagwalker: drop a useless intermediate variable The variable used to contain revs.set() but as the `.set()` has been removed it is now useless.

revset-node: speedup by a few hundred fold Instead of checking all elements of the subset against a single rev, just check if this rev is in the subset. The old way was inherited from when the subset was a list. Non surprise, this provide massive speedup. id("d82e2223f132") before) wall 0.008205 comb 0.000000 user 0.000000 sys 0.000000 (best of 302) after) wall 0.000069 comb 0.000000 user 0.000000 sys 0.000000 (best of 34518) revset #1: public() and id("d82e2223f132") before) wall 0.019763 comb 0.020000 user 0.020000 sys 0.000000 (best of 124) after) wall 0.000101 comb 0.000000 user 0.000000 sys 0.000000 (best of 20130)

revset-only: use `subset &` instead of filtering The & version is more likely to be optimised. only(.) before) wall 0.003216 comb 0.000000 user 0.000000 sys 0.000000 (best of 768) after) wall 0.001086 comb 0.000000 user 0.000000 sys 0.000000 (best of 2231) only(default, stable) before) wall 0.018469 comb 0.020000 user 0.020000 sys 0.000000 (best of 138) after) wall 0.015888 comb 0.010000 user 0.010000 sys 0.000000 (best of 156)

revset-_ancestor: use & instead of filter The & operation is more likely optimised. ::10 before) wall 0.028189 comb 0.030000 user 0.030000 sys 0.000000 (best of 100) after) wall 0.001050 comb 0.000000 user 0.000000 sys 0.000000 (best of 2326) ::tip before) wall 0.081132 comb 0.080000 user 0.080000 sys 0.000000 (best of 100) after) wall 0.055418 comb 0.050000 user 0.050000 sys 0.000000 (best of 100)

obsstore: record data as floating point in fm0 format For python struct module, "d" is double. But for python string formating, "d" is integer. We want to preserve the floating point nature of the data, so we store it in the metadata as floating point. We use "%r" to make sure we get as many significant digitis as necessary to restore the float to the exact same value on the other side. The fm1 is transmitting the information as float. The lack of this made fm1-stored markers not survive a round-trip to fm0 leading to duplicated markers (or two markers very alike).

bundle2: add a comment about addchangegroup source and url

pull: call the `b2x-transactionclose` hook when closing the transaction We need a wider set of hooks to process all the changes that happened during the pull transaction. We reuse the experimental `b2x-transactionclose` hook set from server's unbundle for consistency. This hook is experimental and will not remains as-is forever, but this will open the door for experimentation in 3.2.

revset-only: use __nonzero__ to check if a revset is empty For some smartsets, computing length is more expensive than checking if the set is empty.

_spanset: drop __getitem__ implementation It is expensive and not part of the official smartset API.

filteredset: drop __getitem__ implementation It is expensive and not part of the official smartset API.

generatorset: implement __len__ It was the only smartset class without a `__len__` implementation.

revset: make __len__ part of the offical API It is common for code to ask for the length of a revset. In fact, all but generatorset already implement it.

cmdserver: add service that listens on unix domain socket and forks process Typical use case of 'unix' mode is a background hg daemon. $ hg serve --cmdserver unix --cwd / -a /tmp/hg-`id -u`.sock Unlike 'pipe' mode in which parent process keeps stdio channel, 'unix' server can be detached. So clients can freely connect and disconnect from server, saving Python start-up time. It might be better to write "--cmdserver socket -a unix:/sockpath" instead of "--cmdserver unix -a /sockpath" in case hgweb gets the ability to listen on unix domain socket.

test-commandserver: add connector for unix domain socket server The next patch will introduce --cmdserver unix.

test-commandserver: allow check() to make connection in different way The next patch will add connector for 'unix' mode server.

test-commandserver: remove unused repopath argument from check() Instead of repopath, check() will receive connect() function as argument. It will allow to connect to server of different mode.

cmdserver: make server streams switchable In 'unix' mode, server instance will be created per connection, and fin/fout are set to socket files.

cmdserver: switch service objects by mode server class will be changed to accept fin/fout pair instead of mode string so that it can interact with socket files.

cmdserver: wrap 'pipe' mode server by service object This is the stub for new mode that will listen for connections on unix domain socket. Though --daemon option is not banned in 'pipe' mode, it is useless because the detached 'pipe' mode server exits immediately due to null stdin. Should it abort if --daemon is specified with --cmdserver pipe or --stdio?

histedit: miscellaneous style cleanups Fix some mis-wrapped lines, re-wrap some lines to be more compact, remove superfluous parens.

histedit: update docstring on histeditstate.read() The docstring showed the previous class-less heritage of read(). Now that it's classy, update the docstring.

histedit: remove now-superfluous repo argument from processreplacement Spotted by Olle on the mailing list during review.

histedit: move locks into state Allow action functions to control the locks. This is necessary for an implementation of x/exec or similar.

histedit: read state from histeditstate Read the state in histeditstate. This allows us to correctly update internal variables when necessary without having to recreate a new state. When we read a state in _histedit state while we will already have state passed from histedit(), we can read the state in place and don't have to merge two histeditstates.

histedit: pass state to action functions

histedit: pass state to processreplacement

histedit: pass state to boostrapcontinue Pass the state to boostrapcontinue and remove the unecessary passing of repo.

histedit: let the state expose a context but serialize correctly to nodes The histedit code often expects a context. However histedit hands around the tuple for the serialization and therefore hand over a parentctxnode. This leads to code having to return a context based on the parentctxnode. We let the state only return a context but correctly serialize and deserialze to a node.

histedit: add clear method to remove state Encapsulate the unlinking histedit-state and use the vfs layer instead of os.unlink.

histedit: use state object where necessary We are using the properties from the state object where necessary and ensure that the state is set correctly.

histedit: add histedit state class Add an histeditstate class that is intended to hold the current state. This allows us encapsulate the state and avoids passing around a tuple which is based on the serialization format. In particular this will give actions more control over the state and allow external sources to have more control of histedits behavior, e.g. an external implementation of x/exec.

import-checker: check modules for pure Python build correctly Before this patch, "import-checker.py" just replaces "/" in specified filenames by ".". This makes modules for pure Python build belong to "mercurial.pure" package, and prevents "import-checker.py" from correctly checking about cyclic dependency in them. This patch discards "pure" component from fully qualified name of such modules. To avoid discarding "pure" from the module name of standard libraries unexpectedly, this patch allows "dotted_name_of_path" to discard "pure" only from Mercurial specific modules, which are specified via command line arguments.

import-checker: treat "from mercurial import XXXX" style correctly Before this patch, "import-checker.py" assumes that the name of Mercurial module recognized by "imported_modules" doesn't have package part: for example, "util". This is reason why "import-checker.py" always builds fully qualified module name up relatively, if the given module doesn't belong to standard Python library. But in fact, modules imported in "from mercurial import XXXX" style already have fully qualified name: for example, "mercurial.util" module imported by "mercurial.parsers" is treated as "mercurial.mercurial.util" because of building module name up relatively. This prevents "import-checker.py" from correctly checking about cyclic dependency in them. This patch avoids building module name up relatively, also if module name starts with "mercurial.", to treat modules imported in "from mercurial import XXXX" style correctly.

encoding: avoid cyclic dependency around "parsers" in pure Python build 80f2b63dd83a brought "asciilower" and "import parsers" into "encoding.py". This works fine with "parsers" module in C implementation, but doesn't with one in pure Python implementation, because the latter causes cyclic dependency below and aborting execution: util => i18n => encoding => parsers => util This patch delays importing "parsers" module until it is really needed, to avoid cyclic dependency around "parsers" in pure Python build.

pull: add source information to the transaction The source information can, should be applied once when opening the transaction for the pull. This will lets element processed within a bundle2 be aware of them and open the door to running a set of hooks when closing this pull transaction. This is similar to what is done in server's unbundle call.

changegroup: store source and url in the `hookargs` dict We store the source and url of the current data into `transaction.hookargs` this let us inherit it from upper layers that may have created a much wider transaction. We have to modify bundle2 at the same time to register the source and url in the transaction. We have to do it in the same patch otherwise, the `addchangegroup` call would fill these values and the hook calling will crash because of the duplicated 'source' and 'url' arguments passed to the hook call.

prechangegroup: use hook argument from the transaction There can be useful data in there (eg: bundle2 related one)

addchangegroup: call `prechangegroup` hook after transaction retrieval We want to reused some possible information stored in the transaction `hookargs` dict that may be stored by something handling the transaction at an upper level (eg: bundle2) So we move the running of the hooks after transaction creation. This has no visible effects (but an empty transaction roolback if the hook fails) because nothing had happened in the transaction yet.

addchangegroup: get the `node` argument of `incoming` hook from transaction The transaction is now carrying hook-related informations. So we use it to retrieve the `node` argument. This will also carry around all kinds of other useful informations (like: "are we in a bundle2 processing")

dicthelpers: delete now that they are no longer used

manifest: transpose pair of pairs from diff() It makes more sense for the file nodeids and returned from diff() to be ((n1,fl1),(n2,fl2)) than ((n1,n2),(fl1,fl2)), so change it to the former.

manifest: for diff(), only iterate over files, not flags From manifest.diff(), we return a dict from filename to pairs of pairs of file nodeids and flags (values of the form ((n1,n2),(fl1,fl2))). To create this dict, we currently generate one dict for files (with (n1,n2) values) and one for flags (with (fl1,fl2) values) and then join these dicts. Missing files are represented by None and missing flags by '', but due to the dict joining, the inner pairs themselves can also be None. The only caller, merge.manifestmerge(), then unpacks these values while checking for None values. By inlining the calls to dicthelpers and simplifying it to only iterate over files (ignoring flags-only differences), we can simplify life for our caller.

manifest: repurpose flagsdiff() into (node-and-flag)diff() The manifestdict class already has a method for diff flags between two manifests (presumably because there is no full access to the private _flags field). The only caller is merge.manifestmerge(), which also wants a diff of files between the same manifests. Let's combine the code for diffing files and flags into a single method on manifestdict. This puts all the manifest diffing in one place and will allow for further simplification. It might also be useful for it to be encapsulated in manifestdict if we later decide to to shard manifests. The docstring is intentionally unclear about missing entries for now.

util: add a file handle wrapper class that does hash digest validation It is going to be used for the remote-changegroup feature in bundle2.

util: add a helper class to compute digests It is going to be used for the remote-changegroup feature in bundle2.

bundle2: merge return values when bundle contains multiple changegroups A bundle2 may contain multiple parts adding changegroups, in which case there are multiple operation records for changegroups, each with its own return value. Those multiple return values are aggregated in a single cgresult value for the whole operation. As can be seen in the associated test case, the situation with hooks is not really the best, but without deeper thoughts and changes, we can't do much better. Hopefully, things will be improved before bundle2 is enabled by default. In the meanwhile, multiple changegroups is not expected to be in widespread use, and even less expected to be used for pushes. Also, not many clients cloning or pulling bundle2 with multiple changesets are not expected to have changegroup hooks anyways.

changegroup: use a copy of hookargs when invoking the changegroup hook addchangegroup creates a runhook function that is used to invoke the changegroup and incoming hooks, but at the time the function is called, the contents of hookargs associated with the transaction may have been modified externally. For instance, bundle2 code affects it with obsolescence markers and bookmarks info. It also creates problems when a single transaction is used with multiple changegroups added (as per an upcoming change), whereby the contents of hookargs are that of after adding a latter changegroup when invoking the hook for the first changegroup.

tests: pull common http server setup out of individual tests There are currently two different tests using roughly the same code to create temporary scripts acting as HTTP servers. As there is going to be at least one more in an upcoming change, factor those out in a standalone dumbhttp.py script.

util: move md5 back next to sha1 and allow to call it without an argument This effectively backs out changeset 908c5906091b. The API change is done so that both util.sha1 and util.md5 can be called the same way. The function is moved in order to use it for md5 checksumming for an upcoming bundle2 feature.

test-bundle2-exchange: do not drop HG_NODE from the hook output HG_NODE is precisely something we would like to test.

obsolete: update test-commit-amend to use obsolete option This test actually used the obs.py file as part of the test, so we need to fix up the test a little more than usual to work with the new obsolete option flags.

obsolete: update tests to use obsolete options The obsolete._enabled flag has become a config option. This updates all but one of the tests to use the minimal number of flags necessary for them to pass. For most tests this is just 'createmarkers', for a couple tests it's 'allowunstable', and for even fewer it's 'exchange'.

obsolete: prevent options from being used without createmarkers exchange and allowunstable should only be enabled if createmarkers is enabled, so check for that and raise an exception if that's not the case.

obsolete: add exchange option This adds an option that enables obsolete marker exchange.

obsolete: add allowunstable option This option allows the creation of unstable commits. This allows things like amending in the middle of a stack of commits, etc.

obsolete: add createmarkers option The basic obsolete option is allowing the creation of obsolete markers. This does not enable other features, such as allowing unstable commits or exchanging obsolete markers.

obsolete: add readonly flag to obstore constructor Previously, obstore read the obsolete._enabled flag to determine whether to allow writes to the obstore. Since obsolete._enabled will be moving into a repo specific config, we can't read it globally, and therefore must pass the information into the constructor.

obsolete: add isenabled function for option checking Previously, obsolete used the module level _enabled flag to determine whether it was on or off. We need a bit more granular control, so we'll be introducing toggle options. The isenabled() function is how you check if a particular option is enabled for the given repository. Future patches will add options such as 'createmarkers', 'allowunstable', and 'exchange' to enable various features of obsolete markers.

obsstore: fix defaultformat option passing The obsstore format passing was not actually being passed to the obsstore. This fixes it.

tests: use $PYTHON instead of hardcoding python This makes running the testsuite with pypy possible.

checklink: always close the NamedTemporaryFile This fixes test-patchbomb.t when using pypy with --pure.

hgignore: ignore the PyCharm workspace folder

revset: better naming of variables containing the value of a single argument Calling them args is not helpful.

manifest: add docstring to text() method

manifest: rename ambiguously-named set to setflag Just makes it a little clearer what this method does.

bookmarks: inform transaction-related hooks that some bookmarks were moved We do not have enough information to provide any finer data, but this is still useful information.

phases: inform transaction-related hooks that a phase was moved We do not have enough information to provide finer data, but this is still useful information.

test-bundle2: also test the argument of the changegroup hook We also track execution of the changegroup hook. The important information here is to make sure the information that the transaction was processing a bundle2 is passed to hook. This will let most hooks disable themselves while waiting for the hook concluding bundle2 processing (the one we discovered to be not called for pull in the previous changesets).

test-bundle2: test that we got appropriate hook called with appropriate data We can notice that this transaction wide hook is only happening during push and it is missing changegroup-related information. We'll want to fix this but this is not what this patch is about.

pull: use `stepsdone` instead of `todosteps` The push process uses a `stepsdone` attribute instead of a `todosteps` one (with the logic swapped). We unify the two process by picking the `stepsdone` version. I feel like `stepsdone` better fits extensions that would want to extend the push exchange process.

pull: make discovery phase extensible We apply the same approach as for push and make the discovery extensible. There is only one user in core right now, but we already know we'll need something smarter for obsmarkers. In fact the evolve extension could use this to cleanly extend discovery. The main motivation for this change is consistency between push and pull.

sshpeer: forward stdout of remote "hg init" to appropriate output channel Otherwise, commandserver channel could be corrupted.

revlog: support importing censored file revision tombstones This change allows a revision log to not fail integrity checks when applying a changegroup delta (eg from a bundle) results in a censored file tombstone. The tombstone is inserted as-is, so future integrity verification will observe the tombstone. Deltas based on the tombstone will also remain correct. The new code path is encountered for *exactly* the cases where _addrevision is importing a tombstone from a changegroup. When committing a file containing the "magic" tombstone text, the "text" parameter will be non-empty and the checkhash call is not executed (and when committing, the node will be computed to match the "magic" tombstone text).

verify: report censored nodes if configured policy is abort

context: handle censored data in an on-disk file context based on config Two possible behaviors are defined for handling censored data: abort, and ignore. When we ignore censored data we return an empty file to callers requesting the file data.

manifest: add fastdelta method to manifestdict This is another step closer to alternate manifest implementations that can offer different hashing algorithms.

manifest: move _search to module level and rename to _msearch The rename is intended to provide a slight hint that it is manifest-specific.

manifest: move manifestdict-to-text encoding to manifest class A future patch will introduce a new format, with a new class.

localrepo: access status fields by name rather than index

subrepo: use separate instances of empty lists in status We do modify the lists that make up the status in several places, so it seems risky to use the same instance of a list for several different status types. Use a separate empty list for each type instead.

summary: make status code more readable In commands.summary(), we currently zip a list of labels with a list of statuses. This means the order of the status list has to match the list of the labels, which in turn means the status elements have to be inserted into specific places in the list. Let's instead group the labels and status data we want to display in a single list of pairs.

strip: make checklocalchanges() return full status tuple By making checklocalchanges() return the full instance of the status class instead of just the first 4 elements of it, we can take advantage of the field names and not require the caller to remember the element indices.

fileset: access status fields by name rather than index

histedit: access status fields by name rather than index

shelve: access status fields by name rather than index

record: access status fields by name rather than index It is safe to pass the full status to patch.diff() since it does its own slicing.

purge: access status fields by name rather than index