pager: test the 'enable' config option While poking at this option I realised it was not tested.

config: drop pager from the recommended extension The extension is deprecated, we should having exposing it to users.

config: use "churn" as an example extension "Churn" is not the useful example we have, but this is the one used in 'hg help config.extensions'. As we need something to replace the deprecated 'pager' extension in the example config, we are adding 'churn'.

discovery: prevent crash caused by prune marker having no parent data If a marker has no parent information, parents field is set to None, which caused TypeError. I think this shouldn't normally happen, but somehow I have such marker in my repo.

color: point to the global help in the example hgrc This is probably the best way to have users learn more is they need too.

color: reflect the new default in the example hgrc Color is enabled by default so un-commenting the line would not have any effect. We'll point to the help in the next changeset.

color: point to the config help in global help topic We point out at the help of the config option for user who wants to learn more about the possible config value. The suggested command returns some other extra (color related) results, but this is bug to fix outside of the freeze.

color: reflect the new default in global help topic We point out that color is enabled by default.

docs: describe ui.color consistently with --color The --color option is described to accept "boolean, always, auto, never, or debug". Let's use a similar description for ui.color. Also fix the formatting to use double quotes as we seem to use for about half the values in config.txt (the other half uses double backticks). Also use uppercase Boolean for consistency within the file.

test: glob out variation from 'HGPORT' length On system where HGTEST_PORT is configured to a value an order a magnitude lower or higher than the default. The number of digit in the HGPORT changes and this test breaks.

lock: avoid unintentional lock acquisition at failure of readlock Acquiring lock by vfs.makelock() and getting lock holder (aka "locker") information by vfs.readlock() aren't atomic action. Therefore, failure of the former doesn't ensure success of the latter. Before this patch, lock is unintentionally acquired, if ENOENT causes failure of vfs.readlock() while 5 times retrying, because lock._trylock() returns to caller silently after retrying, and lock.lock() assumes that lock._trylock() returns successfully only if lock is acquired. In this case, lock symlink (or file) isn't created, even though lock is treated as acquired in memory. To avoid this issue, this patch makes lock._trylock() raise LockHeld(EAGAIN) at the end of it, if lock isn't acquired while retrying. An empty "locker" meaning "busy for frequent lock/unlock by many processes" might appear in an abortion message, if lock acquisition fails. Therefore, this patch also does: - use '%r' to increase visibility of "locker", even if it is empty - show hint message to explain what empty "locker" means

lock: avoid unintentional lock acquisition at failure of readlock Acquiring lock by vfs.makelock() and getting lock holder (aka "locker") information by vfs.readlock() aren't atomic action. Therefore, failure of the former doesn't ensure success of the latter. Before this patch, lock is unintentionally acquired, if self.parentlock is None (this is default value), and lock._readlock() returns None for ENOENT at vfs.readlock(), because these None are recognized as equal to each other. In this case, lock symlink (or file) isn't created, even though lock is treated as acquired in memory. To avoid this issue, this patch retries lock acquisition immediately, if lock._readlock() returns None "locker". This issue will be covered by a test added in subsequent patch, because simple emulation of ENOENT at vfs.readlock() easily causes another issue. "raising ENOENT only at the first vfs.readlock() invocation" is too complicated for unit test, IMHO.

httppeer: unify hint message for PeerTransportError Another raising PeerTransportError for "incomplete response" in httppeer.py uses this (changed) hint message. This unification reduces cost of translation.

revset: add i18n comments to error messages for followlines predicate This patch also includes un-quoting "descend" keyword for similarity to other error messages (this seems too trivial as a separated patch).

help: apply bulk fixes for indentation and literal blocking issues There are some paragraphs, which aren't rendered in online help as expected because of indentation and literal blocking issues. - hgext/rebase.py - paragraph before example code ends with ":", which treats subsequent indented paragraphs as normal block => replace ":" with "::" to treat subsequent paragraphs as literal block - help/pager.txt - paragraph before a list of --pager option values ends with "::", which treats subsequent indented paragraphs as literal block => replace "::" with ":" to treat subsequent paragraphs as normal block - the second line of explanation for no/off --pager option value is indented incorrectly (this also causes failure of "make" in doc) => indent correctly - help/revisions.txt - explanation following example code of "[revsetalias]" section isn't suitable for literal block => un-indent explanation paragraph to treat it as normal block - indentation of "For example" before example of tag() revset predicate matching is meaningless - descriptive text for tag() revset predicate matching isn't suitable for literal block => un-indent concatenated two paragraphs to treat them as normal block

rebase: fix incorrect configuration example This configuration example doesn't make rebase require a destination, even though help document wants to show such example.

help: use hg role of mini reST to make hyper link in HTML page

help: use mercurial as a subject of colorization and pagination Now, colorization and pagination are in Mercurial core.

packaging: add make target for linux wheels Having linux wheels is going to helps system without compiler or python-dev plus speed up the installation for everyone. I followed the manylinux example repository https://github.com/pypa/python-manylinux-demo to add a make target (build-linux-wheels) using official docker image to build python 2 linux wheels for mercurial. It generates Python 2.6 and Python 2.7 for both 32 and 64 bits architectures. I had to blacklist several test cases for various reasons: * test-convert-git.t and test-subrepo-git.t because of the git version * test-patchbomb-tls.t because of warning using tls 1.0 It's likely because the docker image is based on centos 5.0 and openssl is outdated.

tests: fix two http tests to also pass inside manylinux1 docker This will let us build Linux wheels.

pager: use less as a fallback on Unix This seems reasonable choice per discussion, and the default-default of Git. See also the inline-comment for why. https://www.mercurial-scm.org/pipermail/mercurial-devel/2017-April/097042.html

test-bookmarks: factor hooks out to a shell script for Windows The previous incarnation of the hooks weren't being run on Windows, which altered the DAG and hashes[1]. [1] https://www.mercurial-scm.org/pipermail/mercurial-devel/2017-April/096987.html

help: explain how to access subtopics in internals

log: document the characters ---graph uses to draw The meaning of : vs | was undocumented and non-obvious.

tests: demonstrate that pager.attend-<abbreviated> doesn't work A pager.attend-* value that isn't a full command or alias name doesn't work. We add explicit test coverage of this to demonstrate it.

tests: test that abbreviated command alias is also paged Explicit test coverage is good.

tests: drop unnecessary pager attend in test `log` is attended by default. We don't need to specify pager.attend-log in this test.

hgweb: change text of followlines links to "older / newer" DAG directions "descending" / "ascending" arguably do not make much sense in the web interface where changes are usually listed by "dates".

hgweb: do not show "descending" link in followlines UI for filelog heads When on a filelog head, we are certain that there will be no descendant so the target of the "descending" link will lead to an empty log result. Do not display the link in this case.

context: optimize linkrev adjustment in blockancestors() (issue5538) We set parent._descendantrev = child.rev() when walking parents in blockancestors() so that, when linkrev adjustment is perform for these, it starts from a close descendant instead of possibly topmost introrev. (See `self._adjustlinkrev(self._descendantrev)` in filectx._changeid().) This is similar to changeset c82d88dfaf59, which added a "f._changeid" instruction in annotate() for the same purpose. However, here, we set _descendantrev explicitly instead of relying on the '_changeid' cached property being accessed (with effect to set _changeid attribute) so that, in _parentfilectx() (called from parents()), we go through `if '_changeid' in vars(self) [...]` branch in which instruction `fctx._descendantrev = self.rev()` finally appears and does what we want. With this, we can roughly get a 3x speedup (including in example of issue5538 from mozilla-central repository) on usage of followlines revset (and equivalent hgweb request).