mq: strip all leading slashes from url when importing When trying to import a url that ends with a slash os.path.basename() would return an empty string. So when seeing a leading slash, remove it and infer the patch name from the remaining url. e.g. `hg qimport http://paste.pocoo.org/raw/xxx/` deduced '.' to be the patch name. Now we'll deduce 'xxx'.

mq: check patch name is valid before reading imported file

tests: update monotone output for v1.0 changes

revlog: stop exporting node.short

patch: fast-path git case in selectfile() We avoid a lot of complicated heuristics in git cases, where these heurestics may even be broken when copies are involved.

patch: unify backend file access interface - Rename readlines() into getfile(), return data and mode - Make setfile() write a data buffer instead of lines, make mode mandatory.

patch: merge backend setmode() into writelines() Copy handling will be easier to handle in a single method.

patch: stop modifying gitpatch objects gitpatch objects emitted by iterhunks() were referencing file paths unmodified from the input patch. _applydif() made them usable by modifying the gitpatch objects in-place with specified path strip level. The same modified objects were then reused by iterhunks() generator. _applydiff() now copies and update the paths which completely decouples both routines. As a side effect, the "git" event now receives only metadata about copies/renames to perform the necessary copies ahead of time. Other actions are handled in the "file" event.

patch: stop handling hunkless git blocks out of stream Patch changes are emitted by iterhunks() in two separate events: 'file' when hunks have to be applied and 'git' to describe other modifications like copies or mode changes. Note that a file which mode is changed and which content is modified by the same patch will be emitted in both events. It is more convenient to handle all file modifications in a single event. This patch "zips" git actions with regular changes so both kinds can be emitted at the same place.

patch: reindent code

patch: unify iterhunks() afile/bfile handling git afile/bfile are extracted twice, once when reading a 'diff --git', and again when reading a unified hunk. The problem is not all git blocks have unified hunks (renames just have metadata) and they were not extracted the same way. This is what this patch unifies.

patch: git metadata was ignored if strip > 1 gitpatch objects emitted by iterhunks() are modified in place by applydiff(). Processing them earlier improves iterhunks() isolation. applydiff() modifying them should still be fixed though.

patch: construct and parse binary hunks at the same time

patch: refactor iterhunks() regular and binary files emission

patch: remove patch.patch() cwd argument

patch: merge _updatedir() into externalpatch()

merge with stable

changelog: convert user and desc from local encoding early Failing to do so makes it impossible to use the memctx API to create a changeset with a commit message or username outside of the current encoding.encoding setting.

merge crew with main

clone: make default path absolute for all local paths This fixes the default path when cloning local repositories with hg-git, since hg-git cancopy() is false even for local repositories.

httpclient: import revision fc731618702a of py-nonblocking-http

httpconnection: improved logging formatting I had to use this debugging output for the first time recently when looking for a problem, and the lack of good formatting made things difficult.

bash_completion: enable alias auto-complete When auto-completing, set HGPLAINEXCEPT=alias to list aliases in the suggestions. Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

ui: enable alias exception when reading config in plain mode When in plain mode with "alias" present in the exception list, keep the aliases. This will be used later to enable auto-completion. Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

ui: test plain mode against exceptions Let ui.plain() accept an optional parameter in the form of a feature name (as a string) to exclude from plain mode. The result of ui.plain is now: - False if HGPLAIN is not set or the requested feature is in HGPLAINEXCEPT - True otherwise Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

revlog: drop base() again deltaparent does what's needed, and more "portably".

patch: add a workingbackend dirstate layer on top of fsbackend _updatedir() is no longer used by internalpatch() The change in test-mq-missingfiles.t comes from workingbackend not considering the missing 'b' file as changed, thus not calling addremove() on it.

patch: handle binary copies as regular ones This introduces a performance regression for large files, as they will be copied just to be clobbered afterwards since binary patching does not use deltas. But it simplifies the code and the previous optimization will be reintroduced later in a better way.

patch: remove files while patching, not in updatedir() At this point, updatedir() only reads the working directory and update the dirstate.

patch: set desired mode when patching, not in updatedir() This patch and the following aim at merging _updatedir() actions into _applydiff().

patch: stop changing current directory before patching _applydiff() patcher argument was added to help hgsubversion like extension monkeypatching the patching process. While it could be removed at this point, I prefer to leave it until patch.py is completely refactored and there is a valid and tested alternative.

revlog: linearize created changegroups in generaldelta revlogs This greatly improves the speed of the bundling process, and often reduces the bundle size considerably. (Although if the repository is already ordered, this has little effect on both time and bundle size.) For non-generaldelta clients, the reduced bundle size translates to a reduced repository size, similar to shrinking the revlogs (which uses the exact same algorithm). For generaldelta clients the difference is minor. When the new bundle format comes, reordering will not be necessary since we can then store the deltaparent relationsships directly. The eventual default behavior for clients and servers is presented in the table below, where "new" implies support for GD as well as the new bundle format: old client new client old server old bundle, no reorder old bundle, no reorder new server, non-GD old bundle, no reorder[1] old bundle, no reorder[2] new server, GD old bundle, reorder[3] new bundle, no reorder[4] [1] reordering is expensive on the server in this case, skip it [2] client can choose to do its own redelta here [3] reordering is needed because otherwise the pull does a lot of extra work on the server [4] reordering isn't needed because client can get deltabase in bundle format Currently, the default is to reorder on GD-servers, and not otherwise. A new setting, bundle.reorder, has been added to override the default reordering behavior. It can be set to either 'auto' (the default), or any true or false value as a standard boolean setting, to either force the reordering on or off regardless of generaldelta. Some timing data from a relatively branch test repository follows. All bundling is done with --all --type none options. Non-generaldelta, non-shrunk repo: ----------------------------------- Size: 276M Without reorder (default): Bundle time: 14.4 seconds Bundle size: 939M With reorder: Bundle time: 1 minute, 29.3 seconds Bundle size: 381M Generaldelta, non-shrunk repo: ----------------------------------- Size: 87M Without reorder: Bundle time: 2 minutes, 1.4 seconds Bundle size: 939M With reorder (default): Bundle time: 25.5 seconds Bundle size: 381M

revlogdag: add linearize function See the docstring for a detailed explanation. The linearizer was originally written by Benoit Boissinot.

localrepo, sshrepo: use Boolean create argument in __init__

commands: replace 'x = f(); return x' with 'return f()'

merge with stable

subrepo: respect non-default path for incoming/outgoing Push and pull set repo._subtoppath before pushing or pulling subrepos. The incoming and outgoing commands needed to do the same.

run-tests: print a newline after all warnings

annotate: fix alignment of columns in front of line numbers (issue2807)

merge with stable

revset: the name is optional for the tag predicate

revset: note case-sensitive match in grep

revset: note case-insensitive matches in keyword and user

revset: expand help for contains predicate

patch: remove unused variable to make pyflakes test happy

patch: add lexists() to backends, use it in selectfile() At this point, all applydiff() filesystem calls should pass through fsbackend.

patch: move copyfile() into backends, abstract basedir

patch: merge makerejlines() into write_rej()

patch: extract fs access from patchfile into fsbackend Most filesystem calls are already isolated in patchfile but this is not enough: renames are performed before patchfile is available and some chmod calls are even done outside of the applydiff call. Once all these calls are extracted into a backend class, we can provide cleaner APIs to write to a working directory context directly into the repository.

mq: fix qpush changes detection of renamed files patch.changedfile() was not considering renamed file source as changed.

httpconnection: correctly handle redirects from http to https Previously the connection cache for keepalives didn't keep track of ssl. This meant that when we connected to an https server after that same server via http, both on the default port, we'd incorrectly reuse the non-https connection as the default port meant the connection cache key was the same.

win32.py: add argtypes and restype This is a feature of ctypes. Without these, pypy complains with RuntimeWarning: C function without declared arguments called RuntimeWarning: C function without declared return type called As a side effect of specifying restypes, the return value of e.g. CreateFileA is now implicitly converted to an instance of _HANDLE, so we also need to change the definition _INVALID_HANDLE_VALUE = -1 to _INVALID_HANDLE_VALUE = _HANDLE(-1).value Otherwise, tests for equality to _INVALID_HANDLE_VALUE in code like def _getfileinfo(name): fh = _kernel32.CreateFileA(name, 0, _FILE_SHARE_READ | _FILE_SHARE_WRITE | _FILE_SHARE_DELETE, None, _OPEN_EXISTING, 0, None) if fh == _INVALID_HANDLE_VALUE: _raiseoserror(name) would now fail to detect an invalid handle, which in turn would lead to exceptions raised with wrong errno values, like e.g. >>> nlinks('missing.txt') Traceback (most recent call last): ... OSError: [Errno 9] missing.txt: The handle is invalid. instead of the correct (as per this patch and before it) >>> nlinks('missing.txt') Traceback (most recent call last): ... OSError: [Errno 2] missing.txt: The system cannot find the file specified.

win32.py: more explicit definition of _STD_ERROR_HANDLE

revset: add follow(filename) to follow a filename's history across copies

revset: introduce filelog() to emulate log's fast path filelog() only reports revisions present in the matching filelogs.

httpclient: import revision b8c3511a8cae from py-nonblocking-http Fixes issues with SSL_ERROR_WANT_READ incorrectly breaking the response read.

run-tests: replace chdir() with Popen cwd option

run-tests: make --debug run in the temporary test directory

run-tests: use the common test path on Windows and Java The alternate one did not run in the test directory and controlling the jobs execution with threads instead of process made it harder to fix.

run-tests: ignore timeout when Popen.terminate is unavailable Popen.terminate was introduced in python 2.6