bdiff: convert more longs to int64_t MSVC previously flagged these where the function is stored in a pointer: bdiff.c(284) : warning C4028: formal parameter 1 different from declaration bdiff.c(284) : warning C4028: formal parameter 2 different from declaration bdiff.c(284) : warning C4028: formal parameter 3 different from declaration bdiff.c(284) : warning C4028: formal parameter 4 different from declaration

xdiff: silence a 32-bit shift warning on Windows It's probably harmless, but: warning C4334: '<<' : result of 32-bit shift implicitly converted to 64 bits (was 64-bit shift intended?) Adding a 'ULL' suffix to 1 also works, but I doubt that's portable.

xdiff: backport int64_t and uint64_t types to Windows Sadly, MSVC 2008 lacks stdint.h. These are the only two definitions needed right now.

templater: extract template evaluation utility to new module Prepares for splitting template functions to new module. All eval* functions were moved to templateutil.py, and run* functions had to be moved as well due to the dependency from eval*s. eval*s were aliased as they are commonly used in codebase. _getdictitem() had to be made public.

templater: move function table to the "context" object Prepares for splitting template functions from templater.py.

hgweb: remove wsgirequest (API) Good riddance. .. api:: The old ``wsgirequest`` class for handling everything WSGI in hgweb has been replaced by separate request and response types. Various high-level functions in the hgweb WSGI applications now receive these new types as arguments instead of the old ``wsgirequest`` type. Differential Revision: https://phab.mercurial-scm.org/D2832

tweakdefaults: add commands.status.verbose to tweakefaults commands.status,verbose if set to True, shows conflict information in `hg status`. It shows which unresolved state you are in, which are the unresolved files and how to continue the unresolved state. That sounds like a very good candidate for tweakdefaults. bisect is added to commands.status.skipstates because people generally leave unresolved bisect state and we should skip that in morestatus output. Differential Revision: https://phab.mercurial-scm.org/D2806

hgweb: store the raw WSGI environment dict We need this so we can construct a new request instance from the original dict. Differential Revision: https://phab.mercurial-scm.org/D2831

hgweb: remove dead wsgirequest code All responses now go through our modern response type. All code related to response handling can be deleted. Differential Revision: https://phab.mercurial-scm.org/D2830

hgweb: port to new response API These were the last consumers of wsgirequest.respond() \o/ Differential Revision: https://phab.mercurial-scm.org/D2829

hgweb: pass modern request type into templater() Only a handful of consumers of wsgirequest remaining in this file... Differential Revision: https://phab.mercurial-scm.org/D2828

hgweb: use modern response type for index generation Differential Revision: https://phab.mercurial-scm.org/D2827

hgweb: don't pass wsgireq to makeindex and other functions We only ever access attributes that are available on our newer request type. So we no longer need this argument. Differential Revision: https://phab.mercurial-scm.org/D2826

hgweb: replace PATH_INFO with dispatchpath This was the last consumer of wsgireq.env from our WSGI applications! (Although indirect consumers of this attribute exist in wsgirequest.respond().) Differential Revision: https://phab.mercurial-scm.org/D2825

hgweb: rewrite path generation for index entries I think this code is easier to read. But the real reason to do this is to eliminate a consumer of wsgirequest. Differential Revision: https://phab.mercurial-scm.org/D2824

hgweb: construct {url} with req.apppath This is how the hgweb WSGI application does it. Let's make the behavior consistent. Differential Revision: https://phab.mercurial-scm.org/D2823

hgweb: support constructing URLs from an alternate base URL The web.baseurl config option allows server operators to define a custom URL for hosted content. The way it works today is that hgwebdir parses this config option into URL components then updates the appropriate WSGI environment variables so the request "lies" about its details. For example, SERVER_NAME is updated to reflect the alternate base URL's hostname. The WSGI environment should not be modified because WSGI applications may want to know the original request details (for debugging, etc). This commit teaches our request parser about the existence of an alternate base URL. If defined, the advertised URL and other self-reflected paths will take the alternate base URL into account. The hgweb WSGI application didn't use web.baseurl. But hgwebdir did. We update hgwebdir to alter the environment parsing accordingly. The old code around environment manipulation has been removed. With this change, parserequestfromenv() has grown to a bit unwieldy. Now that practically everyone is using it, it is obvious that there is some unused features that can be trimmed. So look for this in follow-up commits. Differential Revision: https://phab.mercurial-scm.org/D2822

hgweb: clarify that apppath begins with a forward slash Differential Revision: https://phab.mercurial-scm.org/D2821

hgweb: change how dispatch path is reported When I implemented the new request object, I carried forward some ugly hacks until I could figure out what was happening. One of those was the handling of PATH_INFO to determine how to route hgweb requests. Essentially, if we have PATH_INFO data, we route according to that. But if we don't, we route by the query string. I question if we still need to support query string routing. But that's for another day, I suppose. In this commit, we clean up the ugly "havepathinfo" hack and replace it with a "dispatchpath" attribute that can hold None or empty string to differentiate between the presence of PATH_INFO. This is still a bit hacky. But at least the request parsing and routing code is explicit about the meaning now. Differential Revision: https://phab.mercurial-scm.org/D2820

hgweb: refactor repository name URL parsing The hgwebdir WSGI application detects when a requested URL is for a known repository and it effectively forwards the request to the hgweb WSGI application. The hgweb WSGI application needs to route the request based on the base URL for the repository. The way this normally works is SCRIPT_NAME is used to resolve the base URL and PATH_INFO contains the path after the script. But with hgwebdir, SCRIPT_NAME refers to hgwebdir, not the base URL for the repository. So, there was a hacky REPO_NAME environment variable being set to convey the part of the URL that represented the repository so hgweb could ignore this path component for routing purposes. The use of the environment variable for passing internal state is pretty hacky. Plus, it wasn't clear from the perspective of the URL parsing code what was going on. This commit improves matters by making the repository name an explicit argument to the request parser. The logic around handling of this value has been shored up. We add various checks that the argument is used properly - that the repository name does represent the prefix of the PATH_INFO. Differential Revision: https://phab.mercurial-scm.org/D2819

tests: add test coverage for parsing WSGI requests A subsequent commit will need to make this code more complicated in order to support alternate base URLs. Let's establish some test coverage before we diverge too far from PEP 3333. As part of this, a minor bug related to a missing SCRIPT_NAME key has been squashed. Differential Revision: https://phab.mercurial-scm.org/D2818

hgweb: construct static URL like hgweb does hgwebdir has a bit of code for constructing URLs. This reinvents wheels from our parsedrequest instance. And sometimes the behavior varies from what hgweb does. We'll want to converge that behavior. This commit changes hgwebdir so its staticurl template keyword is constructed the same way as hgweb's. There's probably room to factor this into a shared function. But let's solve the problem of divergence first. Differential Revision: https://phab.mercurial-scm.org/D2817

hgweb: remove unused **map argument It was unused before the recent code refactoring AFAICT. Differential Revision: https://phab.mercurial-scm.org/D2816

hgweb: extract entries() to standalone function There was some real wonkiness going on here. Essentially, the inline function was being executed with default arguments because a function reference was passed as-is into the templater. That seemed odd. So now we pass an explicit generator of the function result. Moving this code out of makeindex() makes makeindex() small enough to reason about. This makes it easier to see weird things, like the fact that we're calling self.refresh() twice. Why, I'm not sure. I'm also not sure why we need to call updatereqenv() to possibly update the SERVER_NAME, SERVER_PORT, and SCRIPT_NAME variables as part of rendering an index. I'll dig into these things in subsequent commits. Differential Revision: https://phab.mercurial-scm.org/D2815

hgweb: move rawentries() to a standalone function It was only accessing a few variables from the outer scope. Let's make it standalone so there is better clarity about what the inputs are. Differential Revision: https://phab.mercurial-scm.org/D2814

hgweb: move archivelist to standalone function This doesn't need to exist as an inline function in a method. Minor formatting changes were made as part of the move. Differential Revision: https://phab.mercurial-scm.org/D2813

hgweb: move readallowed to a standalone function hgwebdir s kind of large. Let's make the class smaller by moving things that don't need to be there. Differential Revision: https://phab.mercurial-scm.org/D2812

hgweb: remove some use of wsgireq in hgwebdir While we're here, rename a method so abide by our style policy, since otherwise check-commit would complain. Differential Revision: https://phab.mercurial-scm.org/D2805

hgweb: fix a bug due to variable name typo It looks like the "sort" query string parameter was not being honored properly. Differential Revision: https://phab.mercurial-scm.org/D2804

hgweb: stop passing req and tmpl into @webcommand functions (API) We have effectively removed all consumers of the old wsgirequest type. The templater can be accessed on the requestcontext passed into the @webcommand function. For the most part, these arguments are unused. They only exist to provide backwards compatibility. And in the case of wsgirequest, use of that object could actively interfere with the new request object. So let's stop passing these objects to @webcommand functions. With this commit, wsgirequest is practically dead from the hgweb WSGI application. There are still some uses in hgwebdir though... .. api:: @webcommand functions now only receive a single argument. The request and templater instances can be accessed via the ``req`` and ``templater`` attributes of the first argument. Note that the request object is different from previous Mercurial releases and consumers of the previous ``req`` 2nd argument will need updating to use the new API. Differential Revision: https://phab.mercurial-scm.org/D2803

hgweb: pass modern request type into various webutil functions (API) Our march towards killing wsgirequest continues. .. api:: Various functions in hgweb.webutil now take a modern request object instead of ``wsgirequest``. Differential Revision: https://phab.mercurial-scm.org/D2802

hgweb: don't redundantly pass templater with requestcontext (API) The requestcontenxt has a ``tmpl`` attribute to access the templater. We don't need to pass the templater explicitly when passing a requestcontext instance. .. api:: Various helper functions in hgweb.webutil no longer accept a templater instance. Access the templater through the ``web`` argument instead. Differential Revision: https://phab.mercurial-scm.org/D2801

hgweb: use templater on requestcontext instance After this commit, all @webcommand function no longer use their "tmpl" argument. Instead, they use the templater attached to the requestcontext. This is the same exact object. So there should be no difference in behavior. Differential Revision: https://phab.mercurial-scm.org/D2800

hgweb: add a sendtemplate() helper function This pattern is common. Let's make a helper function to reduce boilerplate. We store the "global" template on the requestcontext instance and use it. The templater used by the helper function is the same templater that's passed in as an argument to the @webcommand functions. It needs to be this way because various commands are accessing and mutating the defaults on the templater instance. Differential Revision: https://phab.mercurial-scm.org/D2799

hgweb: use web.req instead of req.req We now have access to the modern request type on the requestcontext instance. Let's access it from there. While we're here, remove an unused argument from _search(). Differential Revision: https://phab.mercurial-scm.org/D2798

hgweb: stop setting headers on wsgirequest All commands now go through the new response API. This is dead code. Differential Revision: https://phab.mercurial-scm.org/D2797

hgweb: always return iterable from @webcommand functions (API) We had to hack up this function to support our transition to the new response API. Now that we're done with the transition (!!), we can return to returning an iterator of content chunks from these functions. It is tempting to return a normal object and not a generator. However, as the keyword extension demonstrates, extensions may wish to wrap commands and have a try..finally block around execution. Since there is a generator producing content and that generator could be executing code, the try..finally needs to live for as long as the generator is running. That means we have to return a generator so wrappers can consume the generator inside a try..finally. .. api:: hgweb @webcommand functions must use the new response object passed in via ``web.res`` to initiate sending of a response. The hgweb WSGI application will no longer start sending the response automatically. Differential Revision: https://phab.mercurial-scm.org/D2796

hgweb: send errors using new response API Our slow march off of wsgirequest continues. Differential Revision: https://phab.mercurial-scm.org/D2795

hgweb: refactor 304 handling code We had generic code in wsgirequest for handling HTTP 304 responses. We also had a special case for it in the catch all exception handler in the WSGI application. We only ever raise 304 in one place. So, we don't need to treat it specially in the catch all exception handler. But it is useful to validate behavior of 304 responses. We port the code that sends a 304 to use the new response API. We then move the code for screening 304 sanity into the new response API. As part of doing so, we discovered that we would send Content-Length: 0. This is not allowed. So, we fix our response code to not emit that header for empty response bodies. Differential Revision: https://phab.mercurial-scm.org/D2794

hgweb: transition permissions hooks to modern request type (API) We're trying to remove ``wsgirequest``. The permissions hooks don't do anything they can't do with our new request type. So let's pass that in. This was the last use of ``wsgirequest`` in the wire protocol code! .. api:: hgweb.hgweb_mod.permhooks no longer take a ``wsgirequest`` instance as an argument. Differential Revision: https://phab.mercurial-scm.org/D2793

hgweb: port archive command to modern response API Well, I tried to go with PEP 3333's recommendations and only allow our WSGI application to emit data via a response generator. Unfortunately, the "archive" command calls into the zipfile and tarfile modules and these operator on file objects and must send their data to an object with write(). There's no easy way turn these write() calls into a generator. So, we teach our response type how to expose a file object like object that can be used to write() output. We try to keep the API consistent with how things work currently: callers must call a setbody*(), then sendresponse() to trigger sending of headers, and only then can they get a handle on the object to perform writing. This required overloading the return value of @webcommand functions even more. Fortunately, we're almost completely ported off the legacy API. So we should be able to simplify matters in the near future. A test relying on this functionality has also been updated to use the new API. Differential Revision: https://phab.mercurial-scm.org/D2792

hgweb: refactor fake file object proxy for archiving Python's zip file writer operates on a file object. When doing work, it periodically calls write(), flush(), and tell() on that object. In WSGI contexts, the start_response function returns a write() function. That's a function to write data, not a full file object. So, when the archival code was first introduced in 2b03c6733efa in 2006, someone invented a proxy "tellable" type that wrapped a file object like object and kept track of write count so it could implement tell() and satisfy zipfile's needs. When our archival code runs, it attempts to tell() the destination and if that fails, converts it to a "tellable" instance. Our WSGI application passes the "wsgirequest" instance to the archival function. It fails the tell() test and is converted to a "tellable." It's worth noting that "wsgirequest" implements flush(), so "tellable" doesn't. This hackery all seems very specific to the WSGI code. So this commit moves the "tellable" type and the conversion of the destination file object into the WSGI code. There's a chance some other caller may be passing a file object like object that doesn't implement tell(). But I doubt it. As part of the refactor, our new type implements flush() and doesn't implement __getattr__. Given the intended limited use of this type, I want things to fail fast if there is an attempt to access attributes because I think it is important to document which attributes are being used for what purposes. Differential Revision: https://phab.mercurial-scm.org/D2791

tests: additional test coverage of archive web command This command is special in a few ways. First, it is the only command using the write() function from WSGI's start_response() function. Second, it is setting a custom content-disposition header. We change the test so it prints out full details of the HTTP response. We also save the response body to a file so we can verify its size and hash. The hash check will help ensure that archive generation is deterministic. Differential Revision: https://phab.mercurial-scm.org/D2790

hgweb: port static file handling to new response API hgwebdir_mod hasn't received as much porting effort. So we had to do some minor plumbing to get it to match hgweb_mod and to support the new response object. Differential Revision: https://phab.mercurial-scm.org/D2789

hgweb: remove one-off routing for file?style=raw Now that both functions are using the same API, we can unify how the command is called and perform command-specific behavior in the command itself instead of in the high-level router. Differential Revision: https://phab.mercurial-scm.org/D2788

hgweb: port most @webcommand to use modern response type This only focused on porting the return value. raw file requests are wonky because they go through a separate code path at the dispatch layer. Now that everyone is using the same API, we could clean this up. It's worth noting that wsgirequest.respond() allows sending the Content-Disposition header, but the only user of that feature was removed as part of this change (with the setting of the header now being performed inline). A few @webcommand are not as straightforward as the others and they have not been ported yet. Differential Revision: https://phab.mercurial-scm.org/D2787

hgweb: support using new response object for web commands We have a "requestcontext" type for holding state for the current request. Why we pass in the wsgirequest and templater instance to @webcommand functions, I don't know. I like the idea of standardizing on using "requestcontext" for passing all state to @webcommand functions because that scales well without API changes every time you want to pass a new piece of data. So, we add our new request and response instances to "requestcontext" so @webcommand functions can access them. We also teach our command dispatcher to recognize a new calling convention. Instead of returning content from the @webcommand function, we return our response object. This signals that this response object is to be used for sending output. The keyword extension was wrapping various @webcommand and assuming the output was iterable, so we had to teach it about the new calling convention. To prove everything works, we convert the "filelog" @webcommand to use the new convention. The new calling convention is a bit wonky. I intend to improve this once all commands are ported to use the new response object. Differential Revision: https://phab.mercurial-scm.org/D2786

hgweb: inline caching() and port to modern mechanisms We only had one consumer of this simple function. While it could be a generic function, let's not over abstract the code. As part of inlining, we port it off wsgirequest, fix some Python 3 issues, and set a response header on our new response object so it is ready once we start using it to send responses. Differential Revision: https://phab.mercurial-scm.org/D2785

hgweb: expose repo name on parsedrequest I'm not a fan of doing this because I want to find a better solution to the REPO_NAME hack. But this change gets us a few steps closer to eliminating use of wsgirequest. We can worry about fixing REPO_NAME once wsgirequest is gone. Differential Revision: https://phab.mercurial-scm.org/D2784

hgweb: expose URL scheme and REMOTE_* attributes These are consulted by the HTTP wire protocol handler by reading from the env dict. Let's expose them as attributes instead. With the wire protocol handler updates to use the new attributes, we no longer have any consumers of the legacy wsgirequest type in the wire protocol code (outside of a proxied call to the permissions checker). So, we remove most references to it. Differential Revision: https://phab.mercurial-scm.org/D2783

hgweb: remove wsgirequest.form (API) Now that everything is ported to consume from parsedrequest.qsparams, we no longer have a need for wsgirequest.form. Let's remove all references to it. .. api:: The WSGI request object no longer exposes a ``form`` attribute containing parsed query string data. Use the ``qsparams`` attribute instead. Differential Revision: https://phab.mercurial-scm.org/D2782

hgweb: perform all parameter lookup via qsparams I think I managed to update all call sites using wsgirequest.form to use parsedrequest.qsparams. Since behavior of qsparams is to retrieve last value, behavior will change if a parameter was specified multiple times. But I think this is acceptable. I'm not a fan of the `req.req.qsparams` pattern. And some of the modified code could be written better. But I was aiming for a straight port with this change. Cleanup can come later. Differential Revision: https://phab.mercurial-scm.org/D2781

hgweb: set variables in qsparams We currently mutate wsgireq.form in a few places. Since it is independent from req.qsparams, we will need to make changes on req.qsparams as well before consumers can use qsparams. So let's do that. Eventually, we'll delete wsgireq.form and all references to it. Differential Revision: https://phab.mercurial-scm.org/D2780

hgweb: use our new request object for "style" parameter The "style" parameter is kind of wonky because it is explicitly set and has lookups in random locations. Let's port it to qsparams first because it isn't straightforward. There is subtle change in behavior. But I don't think it is worth calling out in a BC. Our multidict's __getitem__ returns the last set value for a key, not the first. So if the query string set a variable multiple times, before we would get the first value and now we would get the last value. It makes no sense to specify these things multiple times. And I think last write wins is more sensible than first write wins. Differential Revision: https://phab.mercurial-scm.org/D2779

hgweb: use a multidict for holding query string parameters My intention with refactoring the WSGI code was to make it easier to read. I initially wanted to vendor and use WebOb, because it seems to be a pretty reasonable abstraction layer for WSGI. However, it isn't using relative imports and I didn't want to deal with the hassle of patching it. But that doesn't mean we can't use good ideas from WebOb. WebOb has a "multidict" data structure for holding parsed query string and POST form data. It quacks like a dict but allows you to store multiple values for each key. It offers mechanisms to return just one value, all values, or return 1 value asserting that only 1 value is set. I quite like its API. This commit implements a read-only "multidict" in the spirit of WebOb's multidict. We replace the query string attributes of our parsed request with an instance of it. Differential Revision: https://phab.mercurial-scm.org/D2776

hgweb: create dedicated type for WSGI responses We have refactored the request side of WSGI processing into a dedicated type. Now let's do the same thing for the response side. We invent a ``wsgiresponse`` type. It takes an instance of a request (for consulation) and the WSGI application's "start_response" handler. The type basically allows setting the HTTP status line, response headers, and the response body. The WSGI application calls sendresponse() to start sending output. Output is emitted as a generator to be fed through the WSGI application. According to PEP 3333, this is the preferred way for output to be transmitted. (Our legacy ``wsgirequest`` exposed a write() to send data. We do not wish to support this API because it isn't recommended by PEP 3333.) The wire protocol code has been ported to use the new API. Differential Revision: https://phab.mercurial-scm.org/D2775

tests: add test for a wire protocol request to wrong base URL We have code that validates that wire protocol commands (which are specified via query string) must occur at the base URL of a repo. But we have no test coverage for this behavior. Let's add some. Differential Revision: https://phab.mercurial-scm.org/D2778

hgweb: remove support for short query string based aliases (BC) Form data exposed by hgweb is post-processed to expand certain shortcuts. For example, URLs with "?cs=@" is essentially expanded to "?cmd=changeset&node=@". And the URL router treats this the same as "/changeset/@". These shortcuts were initially added in 2005 in 34cb3957d875 and 964baa35faf8. They have rarely been touched in the last decade (just moving code around a bit). We have almost no test coverage of this feature. AFAICT no templates reference URLs of this form. I even looked at the initial version of paper and coal from ~2008 and they use the "/command/params" URL form and not these shortcuts. Furthermore, I couldn't even get some shortcuts to work! For example, "?sl=@" attempts to do a revision search instead of showing shortlog starting at revision @. Maybe I'm just doing it wrong? Because this is ancient, mostly untested code, there is a migration path to something better, and because anyone passionate enough to preserve URLs can install URL redirects, let's nuke the feature. .. bc:: Query string shorts in hgweb like ``?cs=@`` have been removed. Use URLs of the form ``/:cmd`` instead. Differential Revision: https://phab.mercurial-scm.org/D2773

hgweb: remove support for POST form data (BC) Previously, we called out to cgi.parse(), which for POST requests parsed multipart/form-data and application/x-www-form-urlencoded Content-Type requests for form data, combined it with query string parameters, returned a union of the values. As far as I know, nothing in Mercurial actually uses this mechanism to submit data to the HTTP server. The wire protocol has its own mechanism for passing parameters. And the web interface only does GET requests. Removing support for parsing POST data doesn't break any tests. Another reason to not like this feature is that cgi.parse() may modify the QUERY_STRING environment variable as a side-effect. In addition, it merges both POST data and the query string into one data structure. This prevents consumers from knowing whether a variable came from the query string or POST data. That can matter for some operations. I suspect we use cgi.parse() because back when this code was initially implemented, it was the function that was readily available. In other words, I don't think there was conscious choice to support POST data: we just got it because cgi.parse() supported it. Since nothing uses the feature and it is untested, let's remove support for parsing POST form data. We can add it back in easily enough if we need it in the future. .. bc:: Hgweb no longer reads form data in POST requests from multipart/form-data and application/x-www-form-urlencoded requests. Arguments should be specified as URL path components or in the query string in the URL instead. Differential Revision: https://phab.mercurial-scm.org/D2774

hgweb: expose input stream on parsed WSGI request object Our next step towards moving away from wsgirequest to our newer, friendlier parsedrequest type is input stream access. This commit exposes the input stream on the instance. Consumers in the HTTP protocol server switch to it. Because there were very few consumers of the input stream, we stopped storing a reference to the input stream on wsgirequest directly. All access now goes through parsedrequest. However, wsgirequest still may read from this stream as part of cgi.parse(). So we still need to create the stream from wsgirequest. Differential Revision: https://phab.mercurial-scm.org/D2771

hgweb: make parsedrequest part of wsgirequest This is kind of ugly. But an upcoming commit will teach parsedrequest about the input stream. Because the input stream is global state and can't be accessed without side-effects, we need to take actions to ensure that multiple consumers don't read from it independently. The easiest way to do this is for one object to hold a reference to both items having access to the input stream so that when a copy is made, we can remove the attribute from the other instance. So we create our parsed request instance from the wsgirequest constructor and hold a reference to it there. This is better than our new type holding a reference to wsgirequest because all the code for managing access will be temporary and we shouldn't pollute parsedrequest with this ugly history. Differential Revision: https://phab.mercurial-scm.org/D2770

hgweb: refactor the request draining code The previous code for draining was only invoked in a few places in the wire protocol. Behavior wasn't consist. Furthermore, it was difficult to reason about. With us converting the input stream to a capped reader, it is now safe to always drain the input stream when its size is known because we can never overrun the input and read into the next HTTP request. The only question is "should we?" This commit changes the draining code so every request is examined. Draining now kicks in for a few requests where it wouldn't before. But I think the code is sufficiently restricted so the behavior is safe. Possibly the most dangerous part of this code is the issuing of Connection: close for POST and PUT requests that don't have a Content-Length. I don't think there are any such uses in our WSGI application, so this should be safe. In the near future, I plan to significantly refactor the WSGI response handling. I anticipate this code evolving a bit. So any minor regressions around draining or connection closing behavior might be fixed as a result of that work. All tests pass with this change. That scares me a bit because it means we are lacking low-level tests for the HTTP protocol. Differential Revision: https://phab.mercurial-scm.org/D2769

hgweb: use a capped reader for WSGI input stream Per PEP 3333, the input stream from WSGI should respect EOF and prevent reads past the end of the request body. However, not all WSGI servers guarantee this. Notably, our BaseHTTPServer based built-in HTTP server doesn't. Instead, it exposes the raw socket and you can read() from it all you want, getting the connection in a bad state by doing so. We have a "cappedreader" utility class that proxies a file object and prevents reading past a limit. This commit converts the WSGI input stream into a capped reader when the input length is advertised via Content-Length headers. "cappedreader" only exposes a read() method. PEP 3333 states that the input stream MUST also support readline(), readlines(hint), and __iter__(). However, since our WSGI application code only calls read() and since we're not manipulating the stream exposed by the WSGI server, we're not violating the spec here. Differential Revision: https://phab.mercurial-scm.org/D2768

hgweb: document continuereader Differential Revision: https://phab.mercurial-scm.org/D2767

hgweb: remove wsgirequest.__iter__ This was added in d0db3462d568 in 2006. I can't find a justification for this method in PEP 3333. I suspect we were originally intending to use this type as the WSGI application (which should be iterable)? The tests all pass without this method. So let's nuke it. Differential Revision: https://phab.mercurial-scm.org/D2749

hgweb: remove wsgirequest.read() This was just a proxy to self.inp.read(). This method serves little value. Let's nuke it. Callers in the wire protocol server have been updated accordingly. Differential Revision: https://phab.mercurial-scm.org/D2748

hgweb: remove unused methods on wsgirequest writelines() isn't used in our code base. close() was a no-op. It is an optional method per PEP 3333. My eventual goal is to kill the wsgirequest class, hence why I'm removing code. Differential Revision: https://phab.mercurial-scm.org/D2747

wireprotoserver: remove unused argument from _handlehttperror() Differential Revision: https://phab.mercurial-scm.org/D2746

hgweb: store and use request method on parsed request PEP 3333 says that REQUEST_METHOD is always defined. Differential Revision: https://phab.mercurial-scm.org/D2745

hgweb: handle CONTENT_LENGTH PEP 3333 says CONTENT_LENGTH may be set. I /think/ WSGI servers are allowed to invent this key even if the client didn't send it. We had code in wireprotoserver looking for this key. So let's just automagically convert this key to an HTTP request header when parsing the request. Differential Revision: https://phab.mercurial-scm.org/D2744

wireprotoserver: access headers through parsed request Now that we can access headers via the parsed request object, let's do that. Since the new object uses bytes, hyphens, and is case-insensitive, a bit of code around normalizing values has been removed. I think the new code is much more intuitive because it more closely matches what is going out over the wire. Differential Revision: https://phab.mercurial-scm.org/D2743

hgweb: garbage collect on every request There appears to be a cycle in localrepository or hgweb that is preventing repositories from being garbage collected when hgwebdir dispatches to hgweb. Every request creates a new repository instance and then leaks that object and other referenced objects. A periodic GC to find cycles will eventually collect the old repositories. But these don't run reliably and rapid requests to hgwebdir can result in rapidly increasing memory consumption. With the Firefox repository, repeated requests to raw-file URLs leak ~100 MB per hgwebdir request (most of this appears to be cached manifest data structures). WSGI processes quickly grow to >1 GB RSS. Breaking the cycles in localrepository is going to be a bit of work. Because we know that hgwebdir leaks localrepository instances, let's put a band aid on the problem in the form of an explicit gc.collect() on every hgwebdir request. As the inline comment states, ideally we'd do this in a finally block for the current request iff it dispatches to hgweb. But _runwsgi() returns an explicit value. We need the finally to run after generator exhaustion. So we'd need to refactor _runwsgi() to "yield" instead of "return." That's too much change for a patch to stable. So we implement this hack one function above and run it on every request. The performance impact of this change should be minimal. Any impact should be offset by benefits from not having hgwebdir processes leak memory.

amend: abort if unresolved merge conflicts found (issue5805) It was checked by repo.commit() before e8a7c1a0565a "cmdutil: remove the redundant commit during amend."

debugwireproto: close the write end before consuming all available data And make it read all available data deterministically. Otherwise util.poll() may deadlock because both stdout and stderr could have no data. Spotted by the next patch which removes stderr from the fds.

graft: check for missing revision first before scanning working copy Differential Revision: https://phab.mercurial-scm.org/D2753

hook: ensure stderr is flushed when an exception is raised, for test stability Windows has had issues with output order in test-ssh-proto-unbundle.t[1] since it was created a few weeks ago. Each of the problems occurred when an exception was thrown out of the hook. Now the only thing blocking D2720 is the fact that the "abort: ..." lines on stderr are totally AWOL. I have no idea where there are. [1] https://buildbot.mercurial-scm.org/builders/Win7%20x86_64%20hg%20tests/builds/541/steps/run-tests.py%20%28python%202.7.13%29/logs/stdio

wireproto: raise ProgrammingError instead of Abort This isn't a user-facing error and can only be caused by bad Python code. Thanks to Yuya for spotting this. Differential Revision: https://phab.mercurial-scm.org/D2777

py3: make test-commit-interactive.t byte-safe

py3: open patch file in binary mode and convert eol manually Here we don't introduce a reader wrapper since it wouldn't be easy to make read(n) handle partial data and length correctly.

py3: wrap file object to write patch in native eol preserving byte-ness

py3: drop b'' from debug message "moving bookmarks"

py3: use r'' instead of sysstr('') to get around code transformer Fewer function calls should be better.

ui: remove any combinations of CR|LF from prompt response On Windows, we have to accept both CR+LF and LF. This patch simply makes any trailing CRs and LFs removed from a user input instead of doing stricter parsing, as an input must be a readable text.

sshpeer: check pipe validity before forwarding output from it After the previous fix, fileobjectproxy._observedcall() (called when win32.peekpipe() accesses .fileno) started exploding. With this fix, similar checks are needed inside debugwireproto(). Since that is hardcoded to not use os.devnull, IDK if those are worth fixing.

util: forward __bool__()/__nonzero__() on fileobjectproxy In trying to debug the Windows process hang in D2720, I changed the stderr pipe to the peer to be os.devnull instead. That caused sshpeer._cleanuppipes()[1] to explode, complaining NoneType has no __iter__ attribute, even though the previous line checked for None. [1] https://www.mercurial-scm.org/repo/hg/file/b434965f984e/mercurial/sshpeer.py#l133

py3: fix slicing of bisect label in templatefilters.shortbisect()

templatefilters: inline hbisect.shortlabel() It's pretty simple. I don't think the business logic has to be placed in hbisect.py.

py3: make test-bisect.t bytes-safe

py3: fix integer formatting in bisect error

py3: silence f.write() in test-annotate.t

xdiff: resolve signed unsigned comparison warning Since the value won't be changed inside the code (because context lines feature was removed by D2705), let's just remove the variable and inline the 0 value. The code might be potentially further simplified. But I'd like to make sure correctness is easily verifiable in this patch. Differential Revision: https://phab.mercurial-scm.org/D2766

xdiff: use int64 for hash table size Follow-up of the previous "long" -> "int64" change. Now xdiff only uses int for return values and small integers (ex. booleans, shifting score, bits in hash table size, etc) so it should be able to handle large input. Differential Revision: https://phab.mercurial-scm.org/D2765

xdiff: remove unused xpp and xecfg parameters They are unused. Thus removed. Differential Revision: https://phab.mercurial-scm.org/D2764

xdiff: remove unused flags parameter After D2683, the flags parameter in some functions is no longer needed. Thus removed. Differential Revision: https://phab.mercurial-scm.org/D2763

xdiff: replace {unsigned ,}long with {u,}int64_t MSVC treats "long" as 4-byte. That could cause overflows since the xdiff code uses "long" in places where "size_t" or "ssize_t" should be used. Let's use explicit 8 byte integers to avoid FWIW git avoids that overflow by limiting diff size to 1GB [1]. After examining the code, I think the remaining risk (the use of "int") is low since "int" is only used for return values and hash table size. Although a wrong hash table size would not affect the correctness of the code, but that could make the code extremely slow. The next patch will change hash table size to 8-byte integer so the 1GB limit is unlikely needed. This patch was done by using `sed`. [1]: https://github.com/git/git/commit/dcd1742e56ebb944c4ff62346da4548e1e3be67 Differential Revision: https://phab.mercurial-scm.org/D2762

xdiff: add comments for fields in xdfile_t This makes the related code easier to understand. Differential Revision: https://phab.mercurial-scm.org/D2685

xdiff: add a preprocessing step that trims files xdiff has a `xdl_trim_ends` step that removes common lines, unmatchable lines. That is in theory good, but happens too late - after splitting, hashing, and adjusting the hash values so they are unique. Those splitting, hashing and adjusting hash values steps could have noticeable overhead. Diffing two large files with minor (one-line-ish) changes are not uncommon. In that case, the raw performance of those preparation steps seriously matter. Even allocating an O(N) array and storing line offsets to it is expensive. Therefore my previous attempts [1] [2] cannot be good enough since they do not remove the O(N) array assignment. This patch adds a preprocessing step - `xdl_trim_files` that runs before other preprocessing steps. It counts common prefix and suffix and lines in them (needed for displaying line number), without doing anything else. Testing with a crafted large (169MB) file, with minor change: ``` open('a','w').write(''.join('%s\n' % (i % 100000) for i in xrange(30000000) if i != 6000000)) open('b','w').write(''.join('%s\n' % (i % 100000) for i in xrange(30000000) if i != 6003000)) ``` Running xdiff by a simple binary [3], this patch improves the xdiff perf by more than 10x for the above case: ``` # xdiff before this patch 2.41s user 1.13s system 98% cpu 3.592 total # xdiff after this patch 0.14s user 0.16s system 98% cpu 0.309 total # gnu diffutils 0.12s user 0.15s system 98% cpu 0.272 total # (best of 20 runs) ``` It's still slightly slower than GNU diffutils. But it's pretty close now. Testing with real repo data: For the whole repo, this patch makes xdiff 25% faster: ``` # hg perfbdiff --count 100 --alldata -c d334afc585e2 --blocks [--xdiff] # xdiff, after ! wall 0.058861 comb 0.050000 user 0.050000 sys 0.000000 (best of 100) # xdiff, before ! wall 0.077816 comb 0.080000 user 0.080000 sys 0.000000 (best of 91) # bdiff ! wall 0.117473 comb 0.120000 user 0.120000 sys 0.000000 (best of 67) ``` For files that are long (ex. commands.py), the speedup is more than 3x, very significant: ``` # hg perfbdiff --count 3000 --blocks commands.py.i 1 [--xdiff] # xdiff, after ! wall 0.690583 comb 0.690000 user 0.690000 sys 0.000000 (best of 12) # xdiff, before ! wall 2.240361 comb 2.210000 user 2.210000 sys 0.000000 (best of 4) # bdiff ! wall 2.469852 comb 2.440000 user 2.440000 sys 0.000000 (best of 4) ``` [1]: https://phab.mercurial-scm.org/D2631 [2]: https://phab.mercurial-scm.org/D2634 [3]: ``` // Code to run xdiff from command line. No proper error handling. #include <stdlib.h> #include <unistd.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include "mercurial/thirdparty/xdiff/xdiff.h" #define ensure(x) if (!(x)) exit(255); mmfile_t readfile(const char *path) { struct stat st; int fd = open(path, O_RDONLY); fstat(fd, &st); mmfile_t file = { malloc(st.st_size), st.st_size }; ensure(read(fd, file.ptr, st.st_size) == st.st_size); close(fd); return file; } int main(int argc, char const *argv[]) { mmfile_t a = readfile(argv[1]), b = readfile(argv[2]); xpparam_t xpp = {0}; xdemitconf_t xecfg = {0}; xdemitcb_t ecb = {0}; xdl_diff(&a, &b, &xpp, &xecfg, &ecb); return 0; } ``` Differential Revision: https://phab.mercurial-scm.org/D2686

transaction: add a name and a __repr__ implementation (API) This has been useful for me for debugging. Differential Revision: https://phab.mercurial-scm.org/D2758

phabricator: update doc string for deprecated token argument Differential Revision: https://phab.mercurial-scm.org/D2755

phabricator: print deprecation warning only once Differential Revision: https://phab.mercurial-scm.org/D2754

tests: add a few tests involving --collapse and rebase.singletransaction=1 I'm about to change the rebase code quite a bit and this was poorly tested. Differential Revision: https://phab.mercurial-scm.org/D2757

tests: simplify test-rebase-transaction.t The file was extracted from test-rebase-base.t in 8cef8f7d51d0 (test-rebase-base: clarify it is about the "--base" flag, 2017-10-05). This patch follows up that and clarifies the new file's purpose and simplifies it a bit. Differential Revision: https://phab.mercurial-scm.org/D2756

hgweb: parse and store HTTP request headers WSGI transmits HTTP request headers as HTTP_* environment variables. We teach our parser about these and hook up a dict-like data structure that supports case insensitive header manipulation. Differential Revision: https://phab.mercurial-scm.org/D2742

wireprotoserver: remove broken optimization for non-httplib client There was an experimental non-httplib client in core for several years. It was removed a week or so ago. We kept the optimization for this client in the server code. I'm not sure if that was intended or not. But it doesn't matter: the code was wrong. Because the code was accessing a WSGI environment dict, it needed to access the HTTP_X_HGHTTP2 key to actually read the HTTP header. So the code deleted by this commit wasn't actually doing anything meaningful. Doh. Differential Revision: https://phab.mercurial-scm.org/D2741

wireprotoserver: move all wire protocol handling logic out of hgweb Previous patches from several days ago worked to isolate processing of HTTP wire protocol requests to wireprotoserver. We still had a little logic in hgweb. If feels like the right time to finish the job. This commit moves WSGI request servicing from hgweb to wireprotoserver. The ugly dict holding the parsed request is no more. I think the new code is cleaner. As part of this, we now process wire protocol requests before the block to obtain the "query" variable. This makes it clear that this wonky "query" variable is not used by the wire protocol. The wonkiest part about this code is the HTTP 404. I'm actually not sure what all is going on here. It looks like the code is trying to prevent URL with path components that specify a command from not working. That part I grok. What I don't grok is why we need to send a 404. I would think it would be OK to no-op and let another handler try to service the request. But if we do this, we get some subrepo test failures. So it looks like something is expecting the HTTP 404 and reacting to it in a specific way. It /might/ be possible to change the behavior here. But it isn't something I'm comfortable doing because I don't understand the problem space. Differential Revision: https://phab.mercurial-scm.org/D2740

hgweb: use parsed request to construct query parameters The way hgweb routes requests is kind of bonkers. If PATH_INFO is set, we take the URL path after the repository. Otherwise, we take the first part of the query string before "&" and the part before ";" in that. We then kinda/sorta treat this as a path and route based on that. This commit ports that code to use the parsed request object. This required a new attribute on the parsed request to indicate whether there is any PATH_INFO. The new code still feels a bit convoluted for my liking. But we'll need to rewrite more of the code before a better solution becomes apparant. This code feels strictly better since we're no longer doing low-level WSGI manipulation during routing. Differential Revision: https://phab.mercurial-scm.org/D2739

hgweb: only recognize wire protocol commands from query string (BC) Previously, we attempted to parse the wire protocol command from `req.form`. Data could have come from the query string or POST form data. The wire protocol states that the command must be declared in the query string. And AFAICT all Mercurial releases from at least 1.0 send the command in the query string. So let's actual require this behavior. This is technically BC. But I'm not sure how anyone in the wild would encounter this. POST has historically been used for sending bundle data. So there's no opportunity to encode arguments there. And the experimental HTTP POST args also takes over the body. So the only way someone would be impacted by this is if they wrote a custom client that both used POST for everything and sent arguments via the HTTP body. I don't believe such a client exists. .. bc:: The HTTP wire protocol server no longer accepts the ``cmd`` argument to control which command to run via HTTP POST bodies. The ``cmd`` argument must be specified on the URL query string. Differential Revision: https://phab.mercurial-scm.org/D2738

hgweb: teach WSGI parser about query strings Currently, req.form uses cgi.parse() to populate form data. Depending on the request, form data can come from POST multipart/form-data, application/x-www-form-urlencoded, or the URL query string. Putting all these things into one data structure makes it difficult to reason about how exactly parameters got to the request. It can lead to wonkiness such as pulling parameters from both the URL and POST data. This commit teaches our WSGI request parser about argument data in query strings. We populate fields containing the query string data and only the query string data so it can't be confused with POST data. Differential Revision: https://phab.mercurial-scm.org/D2737

hgweb: use the parsed application path directly Previously, we assigned a custom system string with a trailing slash to wsgirequest.url. The addition of the trailing slash felt arbitrary and seems to go against how things typically work in WSGI. We also want our URLs to be bytes, not system strings. And, assigning a custom attribute to wsgirequest felt wrong. This commit fixes all those things by removing the trailing slash from the app path, changing consumers to use that variable and to use it without a trailing slash, and removing the custom attribute from wsgirequest. We preserve the trailing slash on {url}. Also, makebreadcrumb strips the trailing slash. So no change to it was needed. Differential Revision: https://phab.mercurial-scm.org/D2736

hgweb: use computed base URL from parsed request Let's not reinvent URL construction in a function that runs the templater. Differential Revision: https://phab.mercurial-scm.org/D2735

hgweb: parse WSGI request into a data structure Currently, our WSGI applications (hgweb_mod and hgwebdir_mod) process the raw WSGI request instance themselves. This means they have to talk in terms of system strings. And they need to know details about what's in the WSGI request. And in the case of hgweb_mod, it is doing some very funky things with URL parsing to impact dispatching. The code is difficult to read and maintain. This commit introduces parsing of the WSGI request into a higher-level and easier-to-reason-about data structure. To prove it works, we hook it up to hgweb_mod and use it for populating the relative URL on the request instance. We hold off on using it in more places because the logic in hgweb_mod is crazy and I don't want to involve those changes with review of the parsing code. The URL construction code has variations that use the HTTP: Host header (the canonical WSGI way of reconstructing the URL) and with the use of SERVER_NAME. We need to differentiate because hgweb is currently using SERVER_NAME for URL construction. Differential Revision: https://phab.mercurial-scm.org/D2734

hgweb: always use "?" when writing session vars This code resolves a string to insert in URLs as part of a query string. Essentially, it resolves the {sessionvars} template keyword, which is used by hgweb templates to build a URL as a string. The whole approach here feels wrong because there's no way of knowing when this code runs how the final URL will look. There could be additional URL fragments added before this template keyword that add a query string component. Furthermore, I don't think there's *any* for req.url to have a query string. That's because the code that populates this variable only takes SCRIPT_NAME and REPO_NAME into account. The "?" character it is searching for would only be added if some code attempted to add QUERY_STRING to the URL. Hacking the code up to raise if "?" is present in the URL yields a clean test suite run. I'm not sure if we broke this code or if it has always been broken. Anyway, this commit removes support for emitting "&" as the first character in {sessionvars} and makes it always emit "?", which is what it was always doing before AFAICT. Differential Revision: https://phab.mercurial-scm.org/D2733

hgweb: rename req to wsgireq We will soon introduce a parsed WSGI request object so we don't have to concern ourselves with low-level WSGI matters. Prepare for multiple request objects by renaming the existing one so it is clear it deals with WSGI. We also remove a symbol import to avoid even more naming confusion. # no-check-commit because of some new foo_bar naming that's required Differential Revision: https://phab.mercurial-scm.org/D2732

hgweb: validate WSGI environment dict The wsgiref.validate module contains useful functions for validating that various WSGI data structures are proper. This commit adds validation of the environment dict to our built-in HTTP server, which turns an HTTP request into an environment dict. The check discovered that we weren't always setting QUERY_STRING, which would cause the cgi module to fall back to sys.argv. So we change things to always set QUERY_STRING. The check passes on Python 2 and 3. Differential Revision: https://phab.mercurial-scm.org/D2731

hgweb: ensure all wsgi environment values are str Previously, we had a few entries that were bytes on Python 3. PEP-0333 states that all entries must be the native str type (bytes on Python 2, str on Python 3). This required a number of changes to hgweb_mod to unbreak things on Python 3. I suspect there still may be some regressions. I'm going to introduce a data structure that represents a parsed WSGI request in upcoming commits. This will hold bytes and will allow us to stop using raw literals throughout the WSGI code. Differential Revision: https://phab.mercurial-scm.org/D2730

wireproto: formalize permissions checking as part of protocol interface Per the inline comment desiring to formalize permissions checking in the protocol interface, we do that. I'm not convinced this is the best way to go about things. I would love for there to e.g. be a better exception for denoting permissions problems. But it does feel strictly better than snipping attributes on the proto instance. Differential Revision: https://phab.mercurial-scm.org/D2719

wireproto: declare permissions requirements in @wireprotocommand (API) With the security patches from 4.5.2 merged into default, we now have a per-command attribute defining what permissions are needed to run that command. We now have a richer @wireprotocommand that can be extended to record additional command metadata. So we port the permissions mechanism to be based on @wireprotocommand. .. api:: hgweb_mod.perms and wireproto.permissions have been removed. Wire protocol commands should declare their required permissions in the @wireprotocommand decorator. Differential Revision: https://phab.mercurial-scm.org/D2718

wireprotoserver: check permissions in main dispatch function The permissions checking code merged from stable is out of place in the refactored hgweb_mod module. This commit moves the main call to wireprotoserver. We still have some lingering code in hgweb_mod. This will get addressed later. Differential Revision: https://phab.mercurial-scm.org/D2717

wireprotoserver: check if command available before calling it The previous behavior was just plain wrong. I have no clue how it landed. My guess is a merge conflict resolution gone wrong on my end a few weeks ago. Differential Revision: https://phab.mercurial-scm.org/D2716

py3: drop encoding.strio() Its buffered nature makes TextIOWrapper unsuitable for temporarily wrapping bytes I/O.