bundle2: don't check for whether we can do stream clones At the moment this isn't used and all stream clones use the legacy protocol. In an upcoming diff, canperformstreamclone will print out a message if a stream clone was requested but couldn't happen for some reason. Removing this call ensures the message isn't printed twice.

debugcommands: add debugpickmergetool to examine which merge tool is chosen Before this patch, there is no convenient way to know which merge tool is chosen for each managed files without actual merging.

filemerge: add internal merge tool to dump files forcibly Internal merge tool :dump implies premerge. Therefore, files aren't dumped, if premerge runs successfully. This undocumented behavior might confuse users, if they want to always dump files. But just making :dump omit premerge might cause backward compatibility issue for existing automation. This patch adds new internal merge tool :forcedump, which works as same as :dump, but omits premerge always. Internal tools annotated with "nomerge" should merge "change and delete" correctly, but _forcedump() can't. Therefore, it is annotated with "mergeonly" to always omit premerge, even though it doesn't merge files actually. This patch also adds explanation about premerge to :dump, to clarify how :dump actually works. BTW, this patch specifies internal tools with "internal:" prefix in newly added test scenario in test-merge-tools.t, even though this prefix is already deprecated. This is only for similarity to other tests in test-merge-tools.t.

filemerge: make warning message more i18n friendly Before this patch, " specified for " part of warning messages (e.g. "couldn't find merge tool TOOL specified for PAT") isn't translatable.

filemerge: show warning about choice of :prompt only at an actual fallback Before this patch, internal merge tool :prompt shows "no tool found to merge FILE" line, even if :prompt is explicitly specified as a tool to be used. This patch shows warning message about choice of :prompt only at an actual fallback, in which case any tool is rejected by capability for binary or symlink. It is for backward compatibility to omit warning message in "changedelete" case.

treemanifest: allow manifestrevlog to take an explicit treemanifest arg Previously we relied on the opener options to tell the revlog to be a tree manifest. This makes it complicated for extensions to create treemanifests and normal manifests at the same time. Let's add a construtor argument to create a treemanifest revlog as well. I considered removing the options['treemanifest'] logic from manifestrevlog entirely, but doing so shifts the responsibility to the caller which ends up requiring changes in localrepo, bundlerepo, and unionrepo. I figured having the dual mechanism was better than polluting other parts of the code base with treemanifest knowledge.

policy: relax the default for in-place build We're going to make the 'c' policy more strict, where no missing attribute will be allowed. Since we want to run 'hg bisect' without rebuilding the C extension modules, we'll need a looser policy for development environment. The default for system installation isn't changed. Note that the current 'c' policy is practically 'allow'-ish as we have lots of adhoc fallbacks to pure functions.

verify: always check rawsize Previously, verify only checks "rawsize == len(rawtext)", if "len(fl.read()) != fl.size()". With flag processor, "len(fl.read()) != fl.size()" does not necessarily mean "rawsize == len(rawtext)". So we may miss a useful check. This patch removes the "if len(fl.read()) != fl.size()" condition so the rawsize check is always performed. With the condition removed, "fl.read(n)" looks unnecessary so a comment was added to explain the side effect is wanted.

rebase: rename "target" to "destination" in messages The help text for rebase calls it "the destination" (never "target"), so let's use that in messages as well.

rebase: rename "target" to "dest" in variable names It took me a while to figure out that "target" was actually what's passed to --dest.

sslutil: remove conditional cipher code needed for Python 2.6 We dropped support for Python 2.6. So this code to work around a missing feature on 2.6 is no longer necessary.

merge: use repo.wvfs.setflags() instead of util.setflags() Most merge.py code goes through the vfs instead of maniulating files directly, so let's do the same here.

merge with stable

revlog: move part of "addrevision" to "addrawrevision" "addrawrevision" will be the public API to reuse revision rawdata elsewhere. It will be used by a future patch.

filectx: add an overlayfilectx class The end goal is to make it possible to avoid potential expensive fctx.data() when unnecessary. While memctx is useful for creating new file contexts, there are many cases where we could reuse an existing raw file revision (amend, histedit, rebase, process a revision constructed by a remote peer, etc). The overlayfilectx class is made to support such reuse cases. Together with a later patch, hash calculation and expensive flag processor could be avoided.

filectx: remove __new__ It does not seem to be used anywhere, and breaks a later patch.

filectx: add a rawflags method The new method returns the low-level revlog flag. We already have "rawdata" so a "rawflags" makes sense. Both "rawflags" and "rawdata" will be used in a later patch.

filectx: move size to basefilectx See previous patch for context - avoid code duplication.

filectx: make renamed a property cache See previous patch for context - mainly to avoid code duplication.

filectx: make flags a property cache Make basefilectx._flags a property cache, so basefilectx.flags() could be reasonably reused. This avoids code duplication between memfilectx and a class added in a later patch.

commandserver: move printbanner logic to bindsocket bindsocket now handles listen automatically. "printbanner" seems to be just a part of "bindsocket". This simplifies the interface a bit.

commandserver: move "listen" responsibility from service to handler This enables chg to replace a server socket in an atomic way: 1. bind to a temp address 2. listen 3. rename Currently 3 happens before 2 so a client may see the socket file but fails to connect to it.

hghave: remove py27+ capability It is now unused. And we require Python 2.7+ now so this check is not necessary.

tests: remove test targeting Python 2.6 We just removed support for Python 2.7. This test is dead since it only ran on <2.7.

setup: drop support for Python 2.6 (BC) Per discussion on the mailing list and elsewhere, we've decided that Python 2.6 is too old to continue supporting. We keep accumulating hacks/fixes/workarounds for 2.6 and this is taking time away from more important work. So with this patch, we officially drop support for Python 2.6 and require Python 2.7 to run Mercurial.

perf: move revlog construction and length calculation out of benchmark We don't need to measure the time it takes to open the revlog or calculate its length. This is more consistent with what other perf* functions do. While I was here, I also renamed the revlog variable from "r" to "rl" - again in the name of consistency.

perf: clear revlog caches on every iteration cmdutil.openrevlog() may return a cached revlog instance. This /may/ be a recent "regression" due to refactoring of the manifest API. I'm not sure. Either way, this perf command was broken for at least manifests because subsequent invocations of the perf function would get cache hits from previous invocations, invalidating results. In the extreme case, testing the last revision in the revlog resulted in near-instantanous execution of subsequent runs (since the fulltext is cached). A time of ~1us would be reported in this case.

perf: don't convert rev to node before calling revlog.revision()

revlog: rename _chunkraw to _getsegmentforrevs() This completes our rename of internal revlog methods to distinguish between low-level raw revlog data "segments" and higher-level, per-revision "chunks." perf.py has been updated to consult both names so it will work against older Mercurial versions.

perf: store reference to revlog._chunkraw in a local variable To prepare for renaming revlog._chunkraw, we stuff a reference to this metho in a local variable. This does 2 things. First, it moves the attribute lookup outside of a loop, which more accurately measures the time of the code being invoked. Second, it allows us to alias to different methods depending on their presence (perf.py needs to support running against old Mercurial versions). Removing an attribute lookup from a tigh loop appears to shift the numbers slightly with mozilla-central: $ hg perfrevlogchunks -c ! read ! wall 0.354789 comb 0.340000 user 0.330000 sys 0.010000 (best of 28) ! wall 0.335932 comb 0.330000 user 0.290000 sys 0.040000 (best of 30) ! read w/ reused fd ! wall 0.342326 comb 0.340000 user 0.320000 sys 0.020000 (best of 29) ! wall 0.332857 comb 0.340000 user 0.290000 sys 0.050000 (best of 30) ! read batch ! wall 0.023623 comb 0.020000 user 0.000000 sys 0.020000 (best of 124) ! wall 0.023666 comb 0.020000 user 0.000000 sys 0.020000 (best of 125) ! read batch w/ reused fd ! wall 0.023828 comb 0.020000 user 0.000000 sys 0.020000 (best of 124) ! wall 0.023556 comb 0.020000 user 0.000000 sys 0.020000 (best of 126)

revlog: rename internal functions containing "chunk" to use "segment" Currently, "chunk" is overloaded in revlog terminology to mean multiple things. One of them refers to a segment of raw data from the revlog. This commit renames various methods only used within revlog.py to have "segment" in their name instead of "chunk." While I was here, I also made the names more descriptive. e.g. "_loadchunk()" becomes "_readsegment()" because it actually does I/O.

fsmonitor: do not nuke dirstate filecache In the future, chg may prefill repo's dirstate filecache so it's valuable and should be kept. Previously we drop both filecache and property cache for dirstate during fsmonitor reposetup, this patch changes it to only drop property cache but keep the filecache.