configitems: register the 'factotum.executable' config

configitems: register the 'format.maxchainlen' config

configitems: register the 'format.manifestcachesize' config

configitems: register the 'format.generaldelta' config

configitems: register the 'format.dotencode' config

configitems: register the 'format.chunkcachesize' config

configitems: register the 'format.aggressivemergedeltas' config

configitems: gather comment related to 'worker.backgroundclosemaxqueue' Thanks to Yuya for pointing this out.

configitems: register the 'worker.numcpus' config

configitems: register the 'worker.backgroundclosethreadcount' config

configitems: register the 'worker.backgroundcloseminfilecount' config

configitems: register the 'worker.backgroundclosemaxqueue' config

configitems: register the 'patch.eol' config

configitems: register the 'server.zliblevel' config

configitems: register the 'server.validate' config

configitems: register the 'server.uncompressedallowsecret' config

configitems: register the 'server.preferuncompressed' config

configitems: register the 'server.maxhttpheaderlen' config

configitems: register the 'server.disablefullbundle' config

configitems: register the 'server.concurrent-push-mode' config

configitems: register the 'server.compressionengines' config

configitems: register the 'server.bundle1gd' config

configitems: register the 'server.bundle1' config

configitems: register the 'hostsecurity.disabletls10warning' config

configitems: register the 'hostsecurity.ciphers' config

configitem: create a new list of each 'acl.sources' access Thanks for goes to Yuya for spotting this.

dirstate: centralize _cwd handling into _cwd method Before this patch, immediate value is assigned to dirstate._cwd, if ui.forcecwd is specified at instantiation of dirstate. But this doesn't work as expected in some cases. For example, hgweb set ui.forcecwd after instantiation of repo object. If an extension touches repo.dirstate in its reposetup(), dirstate is instantiated without setting ui.forcecwd, and dirstate.getcwd() returns incorrect result. In addition to it, hgweb.__init__() can take already instantiated repo object, too. In this case, repo.dirstate might be already instantiated, even if all enabled extensions don't so in their own reposetup(). To avoid such issue, this patch centralizes _cwd handling into _cwd method. This issue can be reproduced by running test-hgweb-commands.t with fsmonitor-run-tests.py.

tests: add line specific for testing with fsmonitor

tests: make output lines conditional for testing with fsmonitor Repository cloned-bookmark-default and tobundle exist in the working directory of main test repository "repo". We should take care for them, because it is known issue that fsmonitor can't handle nested repositories. These nested repositories are cloned from "repo", and the number of unknown files = files in these repositories (including files under .hg) will be changed easily in the future. But testing with fsmonitor is not ordinary. Therefore, test-bookmarks.t with fsmonitor might be broken silently. This is reason why this patch uses "(glob)" for the number of unknown files in "hg summary" output. BTW, this patch doesn't use .hgignore to make test portable, because .hgignore might cause another issue related to "walk_on_invalidate" configuration of fsmonitor.

tests: add fsmonitor specific output lines at enabling largefiles Temporarily enabling largefiles causes these output lines, only if tests are executed with fsmonitor.

show: document why accidentally quadratic is (probably) acceptable

show: also catch AmbiguousCommand cmdutil.findcmd() can raise this as well. While we'll almost certainly never encounter this in the wild, guard against it regardless.

show: avoid extra list operations

show: tweak warning message '.' is "working directory parent" not "working directory."

revlog: add an experimental option to mitigated delta issues (issue5480) The general delta heuristic to select a delta do not scale with the number of branch. The delta base is frequently too far away to be able to reuse a chain according to the "distance" criteria. This leads to insertion of larger delta (or even full text) that themselves push the bases for the next delta further away leading to more large deltas and full texts. This full text and frequent recomputation throw Mercurial performance in disarray. For example of a slightly large repository 280 000 files (2 150 000 versions) 430 000 changesets (10 000 topological heads) Number below compares repository with and without the distance criteria: manifest size: with: 21.4 GB without: 0.3 GB store size: with: 28.7 GB without 7.4 GB bundle last 15 00 revisions: with: 800 seconds 971 MB without: 50 seconds 73 MB unbundle time (of the last 15K revisions): with: 1150 seconds (~19 minutes) without: 35 seconds Similar issues has been observed in other repositories. Adding a new option or "feature" on stable is uncommon. However, given that this issues is making Mercurial practically unusable, I'm exceptionally targeting this patch for stable. What is actually needed is a full rework of the delta building and reading logic. However, that will be a longer process and churn not suitable for stable. In the meantime, we introduces a quick and dirty mitigation of this in the 'experimental' config space. The new option introduces a way to set the maximum amount of memory usable to store a diff in memory. This extend the ability for Mercurial to create chains without removing all safe guard regarding memory access. The option should be phased out when core has a more proper solution available. Setting the limit to '0' remove all limits, setting it to '-1' use the default limit (textsize x 4).

tests: use system hg only if changelog or dirstate can't be read The bundled hg should work flawlessly in most cases. Make it depend on the external installation only if necessary since we can't control the whole environment. This patch doesn't implement the "exit 80" idea proposed by Jun. I don't want to keep the capability checking sync with the actual tests.

tests: restore workaround of obsolete warning from 3c9066ed557c It's simple and works well unless you are using third-party extensions that changes the store format.

tests: alias syshg and syshgenv so they can be switched conditionally

tests: actually restore the original environment before running syshg Since os.environ may be overridden in run-tests.py, several important variables such as PATH weren't restored. I don't like the idea of using the system hg *by default* because the executable and the configs are out of our control. But I don't mind as long as the tests pass.

Added signature for changeset 26c49ed51a69

Added tag 4.2.2 for changeset 26c49ed51a69

phabricator: add phabread command to read patches This patch adds a `phabread` command generating plain-text patches from Phabricator, suitable for `hg import`. It respects `hg:meta` so user and date information might be preserved. And it removes `Summary:` field name which makes the commit message a bit tidier. To support stacked diffs, a `--stack` flag was added to read dependent patches recursively.

phabricator: add phabsend command to send a stack The `phabsend` command is intended to provide `hg email`-like experience - sending a stack, setup dependency information and do not amend existing changesets. It uses differential.createrawdiff and differential.revision.edit Conduit API to create or update a Differential Revision. Local tags like `D123` are written indicating certain changesets were sent to Phabricator. The `phabsend` command will use obsstore and tags information to decide whether to update or create Differential Revisions.

phabricator: add a contrib script The default Phabricator client arcanist is not friendly to send a stack of changesets. It works better when a feature branch is reviewed as a single review unit. However, we want multiple revisions per feature branch. To be able to have an `hg email`-like UX to send and receive a stack of commits easily, it seems we have to re-invent things. This patch adds `phabricator.py` speaking Conduit API [1] in `contrib` as the first step. This may also be an option for people who don't want to run PHP. Config could be done in `hgrc` (instead of `arcrc` or `arcconfig`): [phabricator] # API token. Get it from https://phab.mercurial-scm.org/conduit/login/ token = cli-xxxxxxxxxxxxxxxxxxxxxxxxxxxx url = https://phab.mercurial-scm.org/ # callsign is used by the next patch callsign = HG This patch only adds a single command: `debugcallconduit` to keep the patch size small. To test it, having the above config, and run: $ hg debugcallconduit diffusion.repository.search <<EOF > {"constraints": {"callsigns": ["HG"]}} > EOF The result will be printed in prettified JSON format. [1]: Conduit APIs are listed at https://phab.mercurial-scm.org/conduit/

show: implement "stack" view People often want to know what they are working on *now*. As part of this, they also commonly want to know how that work is related to other changesets in the repo so they can perform common actions like rebase, histedit, and merge. `hg show work` made headway into this space. However, it is geared towards a complete repo view as opposed to just the current line of work. If you have a lot of in-flight work or the repo has many heads, the output can be overwhelming. The closest thing Mercurial has to "show me the current thing I'm working on" that doesn't require custom revsets is `hg qseries`. And this requires MQ, which completely changes workflows and repository behavior and has horrible performance on large repos. But as sub-optimal as MQ is, it does some things right, such as expose a model of the repo that is easy for people to reason about. This simplicity is why I think a lot of people prefer to use MQ, despite its shortcomings. One common development workflow is to author a series of linear changesets, using bookmarks, branches, anonymous heads, or even topics (3rd party extension). I'll call this a "stack." You periodically rewrite history in place (using `hg histedit`) and reparent the stack against newer changesets (using `hg rebase`). This workflow can be difficult because there is no obvious way to quickly see the current "stack" nor its relation to other changesets. Figuring out arguments to `hg rebase` can be difficult and may require highlighting and pasting multiple changeset nodes to construct a command. The goal of this commit is to make stack based workflows simpler by exposing a view of the current stack and its relationship to other releant changesets, notably the parent of the base changeset in the stack and newer heads that the stack could be rebased or merged into. Introduced is the `hg show stack` view. Essentially, it finds all mutable changesets from the working directory revision in both directions, stopping at a merge or branch point. This limits the revisions to a DAG linear range. The stack is rendered as a concise list of changesets. Alongside the stack is a visualization of the DAG, similar to `hg log -G`. Newer public heads from the branch point of the stack are rendered above the stack. The presence of these heads helps people understand the DAG model and the relationship between the stack and changes made since the branch point of that stack. If the "rebase" command is available, a `hg rebase` command is printed for each head so a user can perform a simple copy and paste to perform a rebase. This view is alpha quality. There are tons of TODOs documented inline. But I think it is good enough for a first iteration.

tests: demonstrate inconsistencies with dirty state in various commands Not only is the output of these commands inconsistent with respect to each other when a file is deleted, they are internally inconsistent depending upon whether the deleted file is in the top level repo or a subrepo. It seemed easier to show the problems, rather than describe them. The original goal was to fix the summary command with respect to deleted files. I haven't fixed any of the other issues yet, in case anybody believes the current subrepo behavior is correct. I think a natural understanding of clean/dirty is that they are two opposite values of a single binary repo state. If `hg update --clean -r .` changes a file, then naturally that repo was dirty, and `hg update --check` should have blocked it. Deleted files are special, in that they don't block a commit. But they make the filesystem content not the same as a clean checkout.

check-config: syntax to allow inconsistent config values The ignore regular expression has been updated to detect "inconsistent config." If present, we track which configs have that set and we suppress the conflicting defaults error for those options. I also added named groups to the regexp to aid readability. A comment was added to profiling.py to make a desired inconsistent value error go away.

configitems: register the 'badserver.closebeforeaccept' config

configitems: register the 'badserver.closeaftersendbytes' config

configitems: register the 'badserver.closeafterrecvbytes' config

configitems: register the 'badserver.closeafteraccept' config

configitems: register the 'blackbox.logsource' config

configitems: register the 'blackbox.dirty' config

configitems: register the 'automv.similarity' config Default value has been ported.

acl: use configlist to retrieve the source config This is what the previous code was about.

configitems: register the 'acl.sources' config The existing default value is now formally declared. It seems like the whole config should be a list, but this is an adventure for the next changesets.

configitems: register the 'acl.config' config

config: register the 'devel.legacy.exchange' config

configitems: register the 'bundle.reorder' config

configitems: register the 'bundle.mainreporoot' config

configitems: register the 'bookmarks.pushing' config

configitems: register the 'auth.cookiefile' config

configitems: register the 'color.mode' config

zeroconf: blindly forward extra argument to the core config method The new default value handling is simpler if we let the original function handle everything.

configitem: fix default value for 'serverrequirecert'

localrepo: factor out base of filecache annotation class It isn't needed that storecache is derived from repofilecache. Changes in this patch allow repofilecache and storecache to do in own __init__() differently from each other.

manifest: apply checkambig=True only for root 00manifest.i This is a fix for my 14ad8e2a4abe, which used 'bool(dir)' as checkambig value for revlog.__init__(). I can't remember why I did so in 14ad8e2a4abe, but this is obviously wrong, because only root indexfile is cached via filecache-ed property of localrepository.

revlog: address review feedback for deltachain C implementation * Scope of "value" is reduced * index_baserev() is documented * Error is no longer redundantly set for -2 return values * Error values are compared <= -2 instead of == -2 to protect against odd failure scenarios

test-rebase-interruptions: stabilize for Windows External hooks end up launching cmd.exe, which knows nothing about $VAR syntax. For some reason, I thought that Mercurial would substitute in the value, in order to paper over the platform difference. But I can't find that in the documentation, and there's at least one other use of this pattern [1]. [1] https://www.mercurial-scm.org/repo/hg/file/tip/tests/test-histedit-fold.t#l477

drawdag: inline transaction() function I suspect Jun wrote the method before he learnt that Python 2.7 allows multiple context managers in a single with-clause.

revlog: C implementation of delta chain resolution I've seen revlog._deltachain() appear in a number of performance profiles. I suspect there are 2 reasons for this: 1. Delta chain resolution performs many index lookups, thus triggering population of index tuples. Creating possibly tens of thousands of PyObject will have overhead. 2. Delta chain resolution is a tight loop. By moving delta chain resolution to C, we can defer instantiation of full index entry tuples and make the loop faster courtesy of not running in Python. We can measure the impact to delta chain resolution via `hg perflogrevision` using the mozilla-central repo with a recent manifest having delta chain length of 33726: $ hg perfrevlogrevision -m 364895 ! full ! wall 0.367585 comb 0.370000 user 0.340000 sys 0.030000 (best of 27) ! wall 0.357581 comb 0.360000 user 0.350000 sys 0.010000 (best of 28) ! deltachain ! wall 0.010644 comb 0.010000 user 0.010000 sys 0.000000 (best of 270) ! wall 0.000292 comb 0.000000 user 0.000000 sys 0.000000 (best of 8729) $ hg perfrevlogrevision --cache -m 364895 ! deltachain ! wall 0.003904 comb 0.000000 user 0.000000 sys 0.000000 (best of 712) ! wall 0.000284 comb 0.000000 user 0.000000 sys 0.000000 (best of 9926) The first test measures savings from both not instantiating index entries and moving to C. The second test (which doesn't clear the index caches) essentially isolates the benefits of moving from Python to C. It still shows a 13.7x speedup (versus 36.4x). And there are multiple milliseconds of savings within the critical path for resolving revision data. I think that justifies the existence of C code. A more striking example of the benefits of this change can be demonstrated by timing `hg debugdeltachain -m` for the mozilla-central repo: $ time hg debugdeltachain -m > /dev/null before: 1057.4s after: 503.3s PyPy2.7 5.8.0: 220.0s It's worth noting that the C code isn't as optimal as it could be. We're still instantiating a new PyObject for every revision. A future optimization would be to reuse the PyObject on the cached index tuple. We could potentially also get wins by using a memory array of raw integers. There is also room for a delta chain cache on revlog instances. Of course, the best optimization is to implement revlog reading outside of Python so Python doesn't need to be concerned about the relatively expensive index entries and operations on them.

help: cleanup grammar in the hooks section

merge with i18n

revlog: backed out changeset e9d325cfe071 We'll move this to the default branch.

i18n-pt_BR: synchronized with efebc9f52ecb

config: register the 'devel.strip-obsmarkers' config The single explicit default that existed so far is converted to registered config value.

config: register the 'devel.serverrequirecert' config

config: register the 'devel.serverexactprotocol' config

config: register the 'devel.servercafile' config

config: register the 'devel.disableloaddefaultcerts' config

config: register the 'devel.check-relroot' config

config: register the devel.check-locks config

config: register the 'devel.bundle2.debug' config Existing explicit default are dropped now that the default is centralised.

config: register the 'devel.all-warnings' config Let us start registering the existing option. I'm starting with the 'devel' section because it is full of useful things that are poorly documented. So registering these will more than other section.

rebase: always pass destination as revnum to _handleskippingobsolete() We were passing it as a revision number in one place and as a context in another. It worked because the only use was in "repo[dest].rev()", but it was confusing. By always passing a revision number, we can also remove that unnecessary lookup.

patch: remove unused fsbackend._join() The function lost its last caller in 2a095d3442e0 (patch: replace functions in fsbackend to use vfs, 2014-06-05) when the callers started relying on the opener to do the join.

patch: add close() to abstractbackend patchbackend() seems to call it on an arbitrary backend, so it seems to be part of the API. Since all subclasses do something in their close() methods, I decided to let this one raise an exception rather than just pass.

log: add an extension hook-point in changeset_printer Extensions sometimes wants to add other information in the default log output format (when no templating is used). Add an empty function named '_exthook' for easing the extension life. Extensions will be able to wrap this function and collaborate to display additional information. Exthook is called after displaying troubles and just before displaying the files, extra and description. Add a new test file to test it and not pollute other test files.

drawdag: support obsmarker creation in comments This patch adds special comment handling so one can create obsmarkers in drawdag comments like "# replace: A -> B -> C", "# prune: X, Y, Z", "split: P -> M, N" and they are just self-explained.

test-drawdag: add a test for drawdag.py The drawdag script is useful but does not have a formal test. This patch adds it.

filemerge: convert a couple of wvfs calls in internal mergetools to contexts One hitch is that sometimes fcd is actually an absentfilectx which does not expose any mutator functions. In order to still use the context functions, we look up the underlying workingfilectx to perform the write there. One alternate way would be to put the write functions on the absentfilectx and have them pass-through. While this makes the callsites cleaner, we would need to decide what its getter functions would return after this point, since returning None for `data` (and True for `isabsent()`) might no longer be correct after a write. I discussed with Sidd about just having the getters raise RuntimeErrors after a mutator has been called, but we actually call isabsent() in merge.py after running the internal merge tools.

configitems: support callable as a default value Yuya pointed out that using mutable value as the default could be problematic. To work around this we now support callable object as default value. This allows for creating new mutable objects on demand when needed.

obsutil: move 'getmarkers' to the new modules We have a new 'obsutil' module now. We move the high level utility there to bring 'obsolete.py' back to a more reasonable size.

obsutil: move the 'marker' class to the new modules We have a new 'obsutil' module now. We move high level utility there to bring 'obsolete.py' back to a more reasonable size.

obsolete: delete three unused utility functions None of this function has been used in the past 5 years, so I think it is safe to just kill them. All code accessing rich markers is using 'getmarkers(...)' instead (or raw markers).

obsutil: move 'foreground' to the new modules We have a new 'obsutil' module now. We move the high level utility there to bring 'obsolete.py' back to a more reasonable size.