debugobsolete: display parents information from markers Now that we have a new field, we need a way to visualize it.

obsmarkers: add a `parentnodes` method to retrieve parent information

obsstore: also store the 'parents' field on disk We now store the `parents` field on disk. We use the same strategy as for `date`: We stick it into the metadata. This is slow and dirty, but this is also the only way we currently have. At some point we'll have a new obsstore format to store this properly.

obsstore: drop 'date' from the metadata dictionary We are extracting the `date` information from the metadata at read time. However, we failed to remove it from the metadata returned in the markers. This is now fixed.

createmarkers: automatically record the parent of pruned changesets We need this information to build the set of relevant markers during exchanges. This can only be done at the `createmarkers` level since the `obsstore.create` function does not have a repo and therefore has no access to the parent information.

obsstore: add a `parents` argument to obsstore.create We need a way to pass the information to the function. Some guru told me that what's arguments are made for.

obsstore: add a `parents` field This field is intended to store the parent of the precursor. This is useful to attach pruned changesets to a set of exchanged changesets. We currently just add the fields with a None value. None stands for "no data recorded".

obsstore: add some documentation about the marker fields As the number of fields grow, it makes sense to start documenting their contents.

transplant: change "editform" to distinguish merge commits from others "editform" argument for "getcommiteditor" is decided according to the format below: EXTENSION[.COMMAND][.ROUTE] - EXTENSION: name of extension - COMMAND: name of command, if there are two or more commands in EXTENSION - ROUTE: name of route, if there are two or more routes in COMMAND This patch newly adds "normal" and "merge" as ROUTE, to distinguish merge commits from other. This patch adds 4 test patterns to test combination of "merge"(x2) and "--continue"(x2).

rebase: change "editform" to distinguish merge commits from others "editform" argument for "getcommiteditor" is decided according to the format below: EXTENSION[.COMMAND][.ROUTE] - EXTENSION: name of extension - COMMAND: name of command, if there are two or more commands in EXTENSION - ROUTE: name of route, if there are two or more routes in COMMAND This patch newly adds "merge" as ROUTE, to distinguish merge commits from other. This patch passes bool as "ctxorbool" to "mergeeditform", because working context has always 2 parents at this point. Dropping the second parent of non-merging commits is executed in "concludenode". Unlike other patches in this series (e.g. for "hg commit"), this patch doesn't add "normal.normal"/"normal.merge" style ROUTEs, because there is no "merge" case in "collapse" ROUTE.

import: change "editform" to distinguish merge commits from others "editform" argument for "getcommiteditor" is decided according to the format below: COMMAND[.ROUTE] - COMMAND: name of command - ROUTE: name of route, if there are two or more routes in COMMAND This patch uses "normal.normal" and "normal.merge" as ROUTE of "editform" instead of "normal", to distinguish merge commits from other in "hg import" without "--bypass" case. This patch assumes "editform" variations for "hg import" below: import.normal.normal import.normal.merge import.bypass.normal import.bypass.merge Unlike other patches in this series, this patch uses "editor.sh" instead of "checkeditform.sh" for the name of the script to check "HGEDITFORM", because it has to do more than checking "HGEDITFORM". To invoke editor forcibly in "test-import-merge.t", this patch creates the patch not having patch description as "merge.nomsg.diff".

commit: change "editform" to distinguish merge commits from other (--amend) "editform" argument for "getcommiteditor" is decided according to the format below: COMMAND[.ROUTE] - COMMAND: name of command - ROUTE: name of route, if there are two or more routes in COMMAND This patch uses "amend.normal" and "amend.merge" as ROUTE of "editform" instead of "amend", to distinguish merge commits from other in "hg commit --amend" case.

commit: change "editform" to distinguish merge commits from others "editform" argument for "getcommiteditor" is decided according to the format below: COMMAND[.ROUTE] - COMMAND: name of command - ROUTE: name of route, if there are two or more routes in COMMAND This patch uses "normal.normal" and "normal.merge" as ROUTE of "editform" instead of "normal", to distinguish merge commits from others in "hg commit" without "--amend" case. This patch assumes "editform" variations for "hg commit" below: commit.normal.normal commit.normal.merge commit.amend.normal commit.amend.merge "mergeeditform" is factored out for subsequent patches. It takes "ctxorbool" argument, because context object can't be passed in some cases.

test-ssh: verify that stderr from remote is printed (issue4336) The issue fixed in the previous patch was uncovered by implementing an extension that printed additional output locally before the push command completed. This test emulates that. If this change is applied before the previous patch, the test will fail on Linux, with the local output being printed before the "remote: " lines.

posix: implement readpipe using non-blocking I/O (issue4336) On Linux, fstat().st_size of a pipe always returns 0, even if the pipe has data available for reading. This meant that reading from and subsequently printing the stderr pipe content after wireproto commands over SSH meant that available data wasn't being printed. We now implement pipe reading on POSIX by doing a non-blocking read for all available data.

platform: implement readpipe() Reading all available data from a pipe has a platform-dependent implementation. This patch establishes platform.readpipe() by copying the inline implementation in sshpeer.readerr(). The implementations for POSIX and Windows are currently identical. The POSIX implementation will be changed in a subsequent patch.

exchange: remove duplicated addition to pushop.stepdone Not sure how it got there but it is useless.

exchange: drop superfluous parens

push: add bookmarks to the unified bundle2 push We use the `pushkey` part to exchange bookmark updates within the unified bundle2 push. Note that this only applies on update (moving a bookmark known on both sides) since bookmark export (creation of a new bookmark on remote) is apparently done outside of the _push function.

test-bundle2: add bookmark movement to the push test If we add bookmarks to bundle2, we need a way to test the new code. Tests are changed beforehand to highlight that inclusion of bookmarks in bundle does not introduce any behavior changes.

push: use stepsdone to control bookmark push If bookmark are to be integrated in the unified bundle2, we need a way to disable the old-style push.

push: move bookmark discovery with other discovery steps The discovery of necessary bookmark updates is now done within the "discovery phase". This opens the door to the inclusion of bookmarks in a unified bundle2 push.

pushbookmark: split an ultra-long line into a saner version We make a temporary variable for the remote bookmark data and we do not expand all elements from `bookmark.compare` since we are going to use only one.

revert: drop dead code for untracked files Untracked files are handled through status now.

revert: handle unknown files through status This will allow us to drop the code dedicated to this special case.

revert: drop more dead code Now that we detect all clean files, we do not need this clause anymore.

revert: add a message to noop action This prepares for the arrival of a second "not touching file" action: revert of an untracked file.

revert: simplify loop conditional The two breaks can be joined into one. The code gains one level of indent.

revert: explode the action tuple in the for loop noop is about to gain a message.

revert: use actions[...] in all disptable cases 1. Special cases are not special enough 2. There are two cases where nothing is done and a message is displayed. This prepares it.

revset: factorize backup decision The conditional controlling the creation of backup is fairly big. We move config related decisions outside of the loop.

revert: use a flat dispatch table Now that the table is simpler, remove one level of depth from it. This simplifies its usage in the for loop.

pushbookmark: do not attempt to update bookmarks if the push failed (BC) Before this patch, there was always an attempt to update bookmark even if prior steps of the push failed. I cannot see a good semantic reason to do so. We disable this possibility to simplify the push flow with bundle2. Bookmarks will be included in the bundle and fail with other steps.

pushbookmark: remove a <cond> and <val> or <other> construct We make the conditional explicit for the sake of readability.

pushbookmark: stop unrolling ancestors Now that ancestors has the same boolean property as a list, we can stop unrolling the set of ancestors. This should provide a significant speedup to this step as ancestor objects are smart and lazy.

ancestors: add a __nonzero__ method This allows using the object in a conditional the same way we can use list.

push: update bookmarks within the remote lock Updating bookmarks is part of the push. It should be done within the same lock as the other steps of the push.

hgweb: refresh repository using URL not path (issue4323) hgweb detects out-of-date repository instances (using a highly suspect mechanism that should probably be fixed) and obtains a new repository object if needed. This patch changes the repository object copy to use the repo URL (instead of path). This preserves more information about the source repository and allows bundles to be served through hgweb. A test verifying that bundles can now be served properly via `hg serve` has been added.

obsmarker: add `date` as an explicit field The markers are now 5-item tuples (concluded by the date). The obsstore.fields contents have been updated accordingly. There is no change to the on-disk format yet, so the date has to be extracted every time we read binary markers and re-injected each team we write them. This introduces a slowdown that will be solved when a new version of the format is added. Such a slowdown was already introduced by the evolve extension anyway.

obsstore: add fields attribute to track each field in a marker We are going to increase the amount of data explicitly stored in obsolescence markers. This mean we are going to have a longer tuple and some values will be shuffled around. So we add a ``fields`` attribute to the obsstore class to keep track of what entry is what. This will be useful for extensions and for documentation purpose.

debugobsolete: explicitly display date in the output As the date is becoming a first-class citizen, we are displaying it in an explicit field. As a bonus it is now readable by humans.

obsolete: add a date argument to the `createmarkers` function The function is now just passing the value to create markers.

debugobsolete: use the new date argument on obsstore.create Now that we have this new argument, we can just use it.

obsstore: add an explicit `date` argument to obsstore.create The date will become an official field in the markers (and ultimately in the on-disk format). We start by making it an official argument for the function.

obsolete: explicitly pass metadata argument using keyword argument We are about to add more arguments to this function (date, parents, etc). Passing metadata as a keyword argument gives us more flexibility when adding them.

obsmarker: add a `flags` method We introduce a proper method to access the flag information.

test-treediscovery: update output after merge Recent change in the push process introduced an extra listing of the phase name space before the push (on default). Meanwhile on default, a fix introduced a new test with debug output. We update the test output to be correct.

revert: add an XXX about rename tracking We check for rename information in the dirstate. This is probably not enough to preserve this behavior when using an explicit target rev. I just spotted this while working on this code, but this is outside the scope of my series so I'm just adding a comment to highlight this suspicious situation.

revert: inline a now useless closure Now that a single call site remains, we can just inline its content.

revert: remove code killed by the double status All those checks were here to catch cases where files were not modified in dirstate but were different in the target revision. This is now properly handled by calling status on the target node too.

revert: drop `missingmodified` set There cannot be any elements in this set since: dsmodified &= modified

revert: detect files added during a merge In case of merge, file that are actually added can be reported as modified. This is currently handled by special-case code. We detect it beforehand instead. This will lets use remove the special-case code at some point in the future.

revert: simplify handling of `added` files There are multiple possible cases for added files. But it's all handled by magic much lower in the stack. We document them, simplify the codes and move on.

merge with stable

rebase: use "rebase.collapse" as "editform" for "--collapse" always Before this patch, if both "--message" and "--collapse" are specified for "hg rebase", "rebaes.normal" is used as "editform" unexpectedly. Unlike patches before and after in this series for improvement, this is bug fix patch.

ui: invoke editor for committing with HGEDITFORM environment variable At the external editor invocation for committing, the value specified as "editform" for "cmdutil.getcommiteditor" is in "HGEDITFORM". This enables external editor to do own customization according to commit types.

cleanup: name unused variables using convention of leading _ This helps checker tools ... and readability for those who knows and follows the convention.

cleanup: rename check-translation.py checker function - don't hide global var

cleanup: remove some unused / duplicate imports

cleanup: fix some list comprehension redefinitions of existing vars In all the remaining cases the comprehension variable is used for the same thing as a previous loop variable. This will mute some pyflakes "list comprehension redefines" warnings.