templater: selecting a style with no templates does not crash (issue4140) Running `hg log --style compact` (or any other style) raised a traceback when no template directory was there. Now there is a message: Abort: style 'compact' not found (available styles: no templates found, try `hg debuginstall` for more info) There is no test because this would require to rename the template directory. But this would influence other tests running in parallel. And when the test would be aborted the wrong named directory would remain, especially a problem when running with -l.

makefile: add $ to environment variables in help message

Added signature for changeset 8862469e16f9

Added tag 2.9-rc for changeset 8862469e16f9

merge with i18n

i18n: fix trailing '::' on translated messages Reported by FUJIWARA Katsunori <foozy@lares.dti.ne.jp>.

merge default into stable for 2.9 code freeze

tests: stop tracking tests/gpg/random_seed test-gpg.t left the random_seed file as modified. That was slightly confusing ... and it was accidentally changed in ea4996754d91. The seed is created on demand and there is no reason to track it. There is also no reason to leak state between test runs so we let the test clean up after running.

tests: 'hghave tic' also requires curses support in Python test-status-color.t would fail when using a Python without curses.

test-import-merge: mangle file in binary mode This should fix a test breakage on Windows.

localrepo: drop dead comment

record: re-enable whitespace-ignoring options It looks like somewhere down the line, patch.diffopts changed the names of the options that it recognises, but record.recordfunc wasn't updated to the new names. Instead of trying to write down names at all, we now use whatever names are provided in commands.diffwsopts and pass that along to patch.diffopts, along with a couple of custom options

record: use commands.diffwsopts instead of ad-hoc diffopts The record extension is writing its own version of commands.diffwsopts which is identical to commands.diffwsopts. Based on the principle that code duplication increases maintenance burden, this patch removes record's ad-hoc diffopts in favour of commands.diffwsopts

phases: add a formal note that hash of secret changeset may leak out For technical reason (discovery, obsolescence marker) the hash of secret changeset are communicated outside of your repo. We clarifie that in the help so that people does not used hash of secret changeset as nuclear launch code.

largefiles: stylistic cleanup of filemerge

largefiles: show hashes before prompting for conflict resolution The largefile hashes are mostly an implementation detail, but they are "leaked" in several places anyway, and showing the hashes is better than not giving the user any information about the options in the prompt. The hashes are long, but it is largefile hashes and it would thus be confusing to shorten them.

largefiles: don't try to explain rename history before prompt for conflicts Before it tried to explain the exact situation when merging moved largefiles. That do not happen for normal merges and is not more relevant for largefiles than for normal files. It is unneeded complexity - remove it.

largefiles: drop redundant special handling of merges of renames It is unclear what cases this was supposed to cover but it do no longer seem relevant.

diff: search beyond ancestor when detecting renames This removes an optimization that was introduced in 91eb4512edd0 but was too aggressive - as indicated by how it changed test-mq-merge.t . We are walking filelogs to find copy sources and we can thus not be sure to hit the base revision and find the renamed file there - it could also be in the first ancestor of the base ... in the filelog. We are walking the filelog and can thus not easily know when we hit the first ancestor of the base revision and which filename to look for there. Instead, we use _findlimit like mergecopies do: The lower bound for how far we have to go is found from the lowest changelog revision that is an ancestor of only one of the compared revisions. Any filelog ancestor with a revision number lower than that revision will be the ancestor of both compared revisions, and there is thus no reason to go further back than that.

cat: increase perf when catting single files Special case the single file case in hg cat. This allows us to avoid parsing the manifest, which shaves 15% off hg cat perf. This is worth it, since automation often uses hg cat for retrieving single files.

changectx: increase perf of walk function When running 'hg cat -r . <file>' it was doing an expensive ctx.walk(m) which applied the regex to every file in the manifest. This changes changectx.walk to iterate over just the files in the regex, if no other patterns are specified. This cuts hg cat time by 50% in our repo and probably benefits a few other commands as well.

url: added authuri when login information is requested (issue3209) When users are using a revset they can get multiple password prompts. This prompts have no extra information about which password is being requested so I added the authuri to the prompt to make it recognizable. As in: $ hg log -r "outgoing('https://bitbucket.org/mg/test') - outgoing('https://bitbucket.org/nesneros/test')" http authorization required realm: Bitbucket.org HTTP user: interrupted! I changed it to describe the url when prompting for password. As in: $ hg log -r "outgoing('https://bitbucket.org/mg/test') - outgoing('https://bitbucket.org/nesneros/test')" http authorization required for https://bitbucket.org/mg/test realm: Bitbucket.org HTTP user: interrupted!

doc: add description about pattern matching against directories Before this patch, there is no explicit description about pattern matching against directories, even though users may understand it from "plain examples" in "hg help patterns". This patch adds description about pattern matching against directories.

revset: add explanation about the pattern without explicit kind Before this patch, online help of "adds()", "contains()", "filelog()", "file()", "modifies()" and "removes()" predicates doesn't explain about how the pattern without explicit kind like "glob:" is treated, even though each predicates treat it differently: - as "relpath:" by "adds()", "modifies()" and "removes()" - as "glob:" by "file()" - as special by "contains()" and "filelog()" - be relative to cwd, and - match against a file exactly ("relpath:" matches also against a directory) This may confuse users. This patch adds explanation about the pattern without explicit kind to these predicates.

revset: use "canonpath()" for "filelog()" pattern without explicit kind Before this patch, revset predicate "filelog()" uses "match.files()" to get filename also for the pattern without explicit kind. But in such case, only canonicalization of relative path is required, and other initializations of "match" object including regexp compilation are meaningless. This patch uses "pathutil.canonpath()" directly for "filelog()" pattern without explicit kind like "glob:", for efficiency. This patch also does below as a part of introducing "canonpath()": - move location of "matchmod.match()" invocation, because "m" is no more used in "if not matchmod.patkind(pat)" code path - omit passing "default" argument to "matchmod.match()", because "pat" should have explicit kind of pattern in this code path

revset: avoid loop for "match.files()" having always one element for efficiency This patch avoids the loop for "match.files()" having always one element in revset predicate "filelog()" for efficiency: "match" object "m" is constructed with "[pat]" as "patterns" argument.

revset: make default kind of pattern for "contains()" rooted at cwd Before this patch, default kind of pattern for revset predicate "contains()" is treated as the exact file path rooted at the root of the repository. This decreases usability, because: - all other predicates taking pattern argument (also "filelog()") treat such pattern as the path rooted at the current working directory - "contains()" doesn't describe this difference in its help - this difference may confuse users for example, this prevents revset aliases from sharing same argument between "contains()" and other predicates This patch makes default kind of pattern for revset predicate "contains()" be rooted at the current working directory. This patch uses "pathutil.canonpath()" instead of creating "match" object for efficiency.

revset: narrow scope of the variable referred only in specific code path This patch narrows scope of the variable "m" in the function for revset predicate "contains()", because it is referred only in "else" code path of "if not matchmod.patkind(pat)" examination.

tests: fix test-run-tests.py on OS X Do the same hack as in test-doctests.py to let the test pass on OS X.

tests: test-debugcommands.t also matches stack trace on python 2.4 Some versions of python 2.4 write ? instead of <module>. Ignore this detail by a glob. This fixes a failure spotted on buildbot, existing since this test lines were introduced 47d0843647d1.

commands: use bookmarks.validdest instead of duplicating logic Now that bookmarks.py has grown a validdest method that even handles successor changesets, we use that instead of duplicating the logic in commands.py

update: consider successor changesets when moving active bookmark Previously, when an obsolete changeset was bookmarked, successor changesets were not considered when moving the bookmark forward. Now that a bare update will move to the tip most of the successor changesets, we also update the bookmark logic to allow the bookmark to move with this update. Tests have been updated and keep issue4015 covered as well.

merge: consider successor changesets for a bare update Previously, a bare update would ignore any successor changesets thus potentially leaving you on an obsolete head. This happens commonly when there is an old bookmark that hasn't been moved forward which is the motivating reason for this patch series. Now, we will check for successor changesets if two conditions hold: 1) we are doing a bare update 2) *and* we are currently on an obsolete head. If we are in this situation, then we calculate the branchtip of the successor set and update to that changeset. Tests coverage has been added.

merge: refactor initialization of variables in update There is no code change here but this helps prepare for future commits that will fix a bare update with obsolete markers.

merge: update comment for future devs

obsolete: clarify documentation for succcessorssets

backout: add a message after backout that need manual commit In some case Backout silently succeeded to back out but left all the change uncommitted. This may be confusing for user so this changeset add a note reminding to commit. Other backout case already actively informs the user about created commit.

backout: avoid update on simple case. Before the changeset the backout process was: 1) go to <target> 2) revert to <target> parent 3) update back to changeset we came from The two update steps can takes a very long time to move back and forth unrelated file change between <target> and current working directory. The new process is just merging current working directory with the parent of <target> using <target> as ancestor. This give the very same result but skip the two updates. On big repo with a lot of files and changes that save a lots of time (x20 for one week window). The "merge" version (hg backout --merge) is still done with upgrades. We could imagine using in memory commit to speed it up but this is another fish.

run-tests: print more information on unnecessary glob matching Extend the message with the test name and the approximate line number. (The line number is the one of the command producing the output.) Finding the line to fix is easier now. old message: ...... Info, unnecessary glob: at a/b/c (glob) .. new message: ...... Info, unnecessary glob in test-example.t (after line 9): at a/b/c (glob) .. The test result is still pass as before.

run-tests: suggest to append glob when only path sep does not match When the line does not match because of \ instead of / (on windows), append (glob) in the expected output. This allows to rename test-bla.t.err to test-bla.t for getting a correct output. This worked for other failures like missing (esc), but not here. Output example (only +- lines of diff): Before: - path/with/local/sep + path\\with\\local/sep Now: - path/with/local/sep + path/with/local/sep (glob)

run-tests: test each line matching function on its own This has several advantages. * Each match function can return some information to the caller runone (used in the next patch). * It is not checked that the line ends in " (glob)" when rematch() returns false. * And it looks more readable.

tests: new test for line matching functions in run-tests Test for failing matches and warnings. (The existing test-run-tests.t can not do both by design.) And simulate matching on other os.

test-backout: add multiple summary calls to monitor result wc The main goal is to monitor that working directory parent are correct after backout. This will be useful the next changeset introducting magic merge usage.

transplant: use "ui.extractchoices()" to show the list of available responses Before this patch, transplant extension shows the list of available responses by specific string, even though the prompt string passed to "ui.promptchoice()" has enough (maybe i18n-ed) information. This patch uses "ui.extractchoices()" to show the list of available responses.

transplant: use "ui.promptchoice()" for interactive transplant Before this patch, transplant extension uses "ui.prompt()" for interactive transplant, and has to check whether user response returned by "ui.prompt()" is valid or not in own code. In addition to it, transplant extension uses response characters (e.g. "y", "n", and so on) directly in own code, and this disallows to use another response characters by translation, even though the help shown by '?' typing is translatable. This patch uses "ui.promptchoice()" instead of "ui.prompt()" to resolve problems above.

transplant: add test for interactive transplant

record: use "ui.extractchoices()" to get the list of available responses Before this patch, record extension gets the list of available responses from online help document of "hg record" in the tricky way, even though the value passed to "ui.promptchoice()" has enough (maybe i18n-ed) information. This patch uses "ui.extractchoices()" to get the list of available responses.

ui: add "extractchoices()" to share the logic to extract choices from prompt

branchmap: use set for update code We are doing membership test and substraction. new code is marginally faster.

branchmap: simplify update code We drop iterrevs which are not needed anymore. The know head are never a descendant of the updated set. It was possible with the old strip code. This simplification make the code easier to read an update.

branchmap: stop useless rev -> node -> rev round trip We never use the node of new revisions unless in the very specific case of closed heads. So we can just use the revision number. So give another handfull of percent speedup.

branchmap: stop membership test in update logic Now that no user try to update the cache on a truncated repo we can drop the extra lookup. Give an handfull percent speedup on big branchmap update.

branchmap: remove silly line break The line fit in 80 character limit without it. It is even shorter without it.

run-tests: set the thread name to the test name for info on error This does not happen when running normal. But when fiddling around with the test infrastructure, this helps a lot. Old traceback messge Exception in thread Thread-7: Traceback (most recent call last): ... new traceback message Exception in thread test-something.t: Traceback (most recent call last): ...

run-tests: report tests as failed when run-test raises an error Before no message was returned to the main thread. No result was registered and no new thread was started. This does not happen when running normal. But when fiddling around with the test infrastructure, this helps a lot.

hgweb: infinite scroll support for coal style

test-hgweb-*: output change fixes from b1d65cb8

hgweb: infinite scroll support for monoblue style

hgweb: infinite scroll support for gitweb style

hgweb: avoid invalid infinity scroll request when overwritten web.style Infinity scroll is broken when you override the web.style in the following ways: $ hg --config='web.style=gitweb' serve $ open http://localhost:8080/shortlog?style=paper ajaxScrollInit should use http://localhost:8080/shortlog/%next%?style=paper. however, http://localhost:8080/shortlog/%next% is used actually. It is missing style parameter. This patch add style parameter to request url.

hgweb: fix regexp for other styles like monoblue Some styles have indentation.

tests: introduce test for rebasing on named branches with closed heads

rebase: remove old code for handling empty rebaseset

rebase: improve error message for --base being empty or causing emptiness Before it just said 'nothing to rebase'. Now 'if "base" is an empty set: abort: empty "base" revision set - can't compute rebase set If the set of changesets to rebase can't be found from "base", it will fail as before but with more explanation of what the problem was. The name of the "base" option is not obvious - it is more like "samples identifying the branch to rebase". The error messages for problems with the specified "base" value will use that term and might thus also not be obvious, but at least they are consistent with the option name. The name "base" will not be used if the base only was specified implicitly as the working directory parent.