tests: test-debugcommands.t also matches stack trace on python 2.4 Some versions of python 2.4 write ? instead of <module>. Ignore this detail by a glob. This fixes a failure spotted on buildbot, existing since this test lines were introduced 47d0843647d1.

commands: use bookmarks.validdest instead of duplicating logic Now that bookmarks.py has grown a validdest method that even handles successor changesets, we use that instead of duplicating the logic in commands.py

update: consider successor changesets when moving active bookmark Previously, when an obsolete changeset was bookmarked, successor changesets were not considered when moving the bookmark forward. Now that a bare update will move to the tip most of the successor changesets, we also update the bookmark logic to allow the bookmark to move with this update. Tests have been updated and keep issue4015 covered as well.

merge: consider successor changesets for a bare update Previously, a bare update would ignore any successor changesets thus potentially leaving you on an obsolete head. This happens commonly when there is an old bookmark that hasn't been moved forward which is the motivating reason for this patch series. Now, we will check for successor changesets if two conditions hold: 1) we are doing a bare update 2) *and* we are currently on an obsolete head. If we are in this situation, then we calculate the branchtip of the successor set and update to that changeset. Tests coverage has been added.

merge: refactor initialization of variables in update There is no code change here but this helps prepare for future commits that will fix a bare update with obsolete markers.

merge: update comment for future devs

obsolete: clarify documentation for succcessorssets

backout: add a message after backout that need manual commit In some case Backout silently succeeded to back out but left all the change uncommitted. This may be confusing for user so this changeset add a note reminding to commit. Other backout case already actively informs the user about created commit.

backout: avoid update on simple case. Before the changeset the backout process was: 1) go to <target> 2) revert to <target> parent 3) update back to changeset we came from The two update steps can takes a very long time to move back and forth unrelated file change between <target> and current working directory. The new process is just merging current working directory with the parent of <target> using <target> as ancestor. This give the very same result but skip the two updates. On big repo with a lot of files and changes that save a lots of time (x20 for one week window). The "merge" version (hg backout --merge) is still done with upgrades. We could imagine using in memory commit to speed it up but this is another fish.

run-tests: print more information on unnecessary glob matching Extend the message with the test name and the approximate line number. (The line number is the one of the command producing the output.) Finding the line to fix is easier now. old message: ...... Info, unnecessary glob: at a/b/c (glob) .. new message: ...... Info, unnecessary glob in test-example.t (after line 9): at a/b/c (glob) .. The test result is still pass as before.

run-tests: suggest to append glob when only path sep does not match When the line does not match because of \ instead of / (on windows), append (glob) in the expected output. This allows to rename test-bla.t.err to test-bla.t for getting a correct output. This worked for other failures like missing (esc), but not here. Output example (only +- lines of diff): Before: - path/with/local/sep + path\\with\\local/sep Now: - path/with/local/sep + path/with/local/sep (glob)

run-tests: test each line matching function on its own This has several advantages. * Each match function can return some information to the caller runone (used in the next patch). * It is not checked that the line ends in " (glob)" when rematch() returns false. * And it looks more readable.

tests: new test for line matching functions in run-tests Test for failing matches and warnings. (The existing test-run-tests.t can not do both by design.) And simulate matching on other os.

test-backout: add multiple summary calls to monitor result wc The main goal is to monitor that working directory parent are correct after backout. This will be useful the next changeset introducting magic merge usage.

transplant: use "ui.extractchoices()" to show the list of available responses Before this patch, transplant extension shows the list of available responses by specific string, even though the prompt string passed to "ui.promptchoice()" has enough (maybe i18n-ed) information. This patch uses "ui.extractchoices()" to show the list of available responses.

transplant: use "ui.promptchoice()" for interactive transplant Before this patch, transplant extension uses "ui.prompt()" for interactive transplant, and has to check whether user response returned by "ui.prompt()" is valid or not in own code. In addition to it, transplant extension uses response characters (e.g. "y", "n", and so on) directly in own code, and this disallows to use another response characters by translation, even though the help shown by '?' typing is translatable. This patch uses "ui.promptchoice()" instead of "ui.prompt()" to resolve problems above.

transplant: add test for interactive transplant

record: use "ui.extractchoices()" to get the list of available responses Before this patch, record extension gets the list of available responses from online help document of "hg record" in the tricky way, even though the value passed to "ui.promptchoice()" has enough (maybe i18n-ed) information. This patch uses "ui.extractchoices()" to get the list of available responses.

ui: add "extractchoices()" to share the logic to extract choices from prompt

branchmap: use set for update code We are doing membership test and substraction. new code is marginally faster.

branchmap: simplify update code We drop iterrevs which are not needed anymore. The know head are never a descendant of the updated set. It was possible with the old strip code. This simplification make the code easier to read an update.

branchmap: stop useless rev -> node -> rev round trip We never use the node of new revisions unless in the very specific case of closed heads. So we can just use the revision number. So give another handfull of percent speedup.

branchmap: stop membership test in update logic Now that no user try to update the cache on a truncated repo we can drop the extra lookup. Give an handfull percent speedup on big branchmap update.

branchmap: remove silly line break The line fit in 80 character limit without it. It is even shorter without it.

run-tests: set the thread name to the test name for info on error This does not happen when running normal. But when fiddling around with the test infrastructure, this helps a lot. Old traceback messge Exception in thread Thread-7: Traceback (most recent call last): ... new traceback message Exception in thread test-something.t: Traceback (most recent call last): ...

run-tests: report tests as failed when run-test raises an error Before no message was returned to the main thread. No result was registered and no new thread was started. This does not happen when running normal. But when fiddling around with the test infrastructure, this helps a lot.

hgweb: infinite scroll support for coal style

test-hgweb-*: output change fixes from b1d65cb8

hgweb: infinite scroll support for monoblue style

hgweb: infinite scroll support for gitweb style

hgweb: avoid invalid infinity scroll request when overwritten web.style Infinity scroll is broken when you override the web.style in the following ways: $ hg --config='web.style=gitweb' serve $ open http://localhost:8080/shortlog?style=paper ajaxScrollInit should use http://localhost:8080/shortlog/%next%?style=paper. however, http://localhost:8080/shortlog/%next% is used actually. It is missing style parameter. This patch add style parameter to request url.

hgweb: fix regexp for other styles like monoblue Some styles have indentation.

tests: introduce test for rebasing on named branches with closed heads

rebase: remove old code for handling empty rebaseset

rebase: improve error message for --base being empty or causing emptiness Before it just said 'nothing to rebase'. Now 'if "base" is an empty set: abort: empty "base" revision set - can't compute rebase set If the set of changesets to rebase can't be found from "base", it will fail as before but with more explanation of what the problem was. The name of the "base" option is not obvious - it is more like "samples identifying the branch to rebase". The error messages for problems with the specified "base" value will use that term and might thus also not be obvious, but at least they are consistent with the option name. The name "base" will not be used if the base only was specified implicitly as the working directory parent.

rebase: improve error message for empty --source set Before, it just said 'nothing to rebase' in this case. Now, it aborts mentioning the reason: 'empty "source" revision set'. Specifying revisions that cannot be rebased is a 'soft' error, but specifying an empty set deserves an abort that explains exactly what the problem is.

rebase: improve error message for empty --rev set Before, it just said 'nothing to rebase' in this case. Now, it aborts mentioning the reason: 'empty "rev" revision set'. Specifying revisions that cannot be rebased is a 'soft' error, but specifying an empty set deserves an abort that explains exactly what the problem is.

rebase: test for empty dest revision

help: branch names primarily denote the tipmost unclosed branch head Was the behavior correct and the description wrong so it should be updated as in this patch? Or should the code work as the documentation says? Both ways could make some sense ... but none of them are obvious in all cases. One place where it currently cause problems is when the current revision has another branch head that is closer to tip but closed. 'hg rebase' refuses to rebase to that as it only see the tip-most unclosed branch head which is the current revision. /me kind of likes named branches, but no so much how branch closing works ...

util: introduce util.debugstacktrace for showing a stack trace without crashing This is often very handy when hacking/debugging. Calling util.debugstacktrace('hey') from a place in hg will give something like: hey at: ./hg:38 in <module> /home/user/hgsrc/mercurial/dispatch.py:28 in run /home/user/hgsrc/mercurial/dispatch.py:65 in dispatch /home/user/hgsrc/mercurial/dispatch.py:88 in _runcatch /home/user/hgsrc/mercurial/dispatch.py:740 in _dispatch /home/user/hgsrc/mercurial/dispatch.py:514 in runcommand /home/user/hgsrc/mercurial/dispatch.py:830 in _runcommand /home/user/hgsrc/mercurial/dispatch.py:801 in checkargs /home/user/hgsrc/mercurial/dispatch.py:737 in <lambda> /home/user/hgsrc/mercurial/util.py:472 in check ...

check-code: print debug output when an ignore pattern matches

check-code: drop now unused check-code-ignore Using check-code-ignore to skip the failures on a line has several disadvantages: * It skips all check-code failures on a line, not only the one it was created for. * It does not give any hint for which rule it was added, making it difficult to see when it is not needed anymore. So drop this pragma in favor of better alternatives promoted before.

check-code: explain what to do when a check-code rule mismatches In the past several approaches were used when a check-code rule triggered without a good reason. Not all of them looked nice, some were even wrong. Suggest some good practices which should be used instead.

cleanup: Remove the only ever used skip-check-code pragma Use the work-around suggested by the rule instead

check-code: always report when a file is skipped by "no-check-code" Skipping an entire file generally from checking is an important event, so report it always. Do not tell the check name because skipping does not depend on it. Directly skip the entire file instead of checking more patterns and skip again. The pragma no-check-code was introduced by accident in the past. (Fixed in e033a7d444ac and ee07f9d142c9.) This now is prevented because the files to skip have to be listed in the test output of test-check-code-hg.t.

check-code: do not skip entire file, skip only one match instead Skipping of the entire file has been introduced in bc3b48b0f5c8.

bisect: --command without --noupdate should flag the parent rev it tested 14913fcb30c6 not only introduced the 'bisect(current)' revset predicate, it also changed how the 'current' revision is used in combination with --command. The new behaviour might be ok for --noupdate where the working directory and its revision shouldn't be used, but it also did that when --command is used to run a command on the currently checked out revision then it could register the test result on the wrong revision. An example: Before, bisect with --command could use the wrong revision when recording the test result: $ hg up -qr 0 $ hg bisect --command "python \"$TESTTMP/script.py\" and some parameters" changeset 31:58c80a7c8a40: bad abort: inconsistent state, 31:58c80a7c8a40 is good and bad Now it works as before and as expected and uses the working directory revision for the --command result: $ hg up -qr 0 $ hg bisect --command "python \"$TESTTMP/script.py\" and some parameters" changeset 0:b99c7b9c8e11: bad ...

context: drop caching 'copies' method The 'copies' method has no test coverage and calls copies.pathcopies with an incorrect number of parameters and is thus (fortunately) not used. Kill it.