remotefilelog: drop compat code for "getbundle_shallow" wireprotocol command Doing some annotate on hgexperimental shows that getbundle_shallow used to exist in 2013 or before. We don't have any pre-2013 remotefilelog users except Fb themselves and I doubt they are going to use in-core remotefilelog. So it's safe to remove this. Differential Revision: https://phab.mercurial-scm.org/D5193

tests: remove lz4 as dependency while running tests One of the previous patch authored by Augie rips out the lz4 dependency and things should work without it. Now there are just 2-3 tests failing because of same change in emitrevisions() API. Differential Revision: https://phab.mercurial-scm.org/D5192

remotefilelogserver: add a matcher argument to _walkstreamfiles() Implementing narrow stream clones in core, I added an optional matcher argument. The function in remotefilelogserver.py does not know about that argument and does not accept that and hence some tests fails. Differential Revision: https://phab.mercurial-scm.org/D5191

shallowutil: introduce a helper function isenabled() This patch introduces a inenabled() function which will check whether remotefilelog is enabled or not. The function is then also used at all the places where check whether remotefilelog is enabled or not. The new function makes code easy to read without need to understand what is the constant involved and why we are checking repo.requirements. Differential Revision: https://phab.mercurial-scm.org/D5190

remotefilelog: remove some BC code related to streamclone Since remotefilelog is now moved to core and we have streamclone._walkstreamfiles() in core, we don't need to have the backward compatibility code. People with old mercurial version should use remotefilelog from hg-experimental repo as IMO remotefilelog will go under a good refactoring and old clients will break. # no-check-commit foo_bar function name Differential Revision: https://phab.mercurial-scm.org/D5189

remotefilelog: add some docstring Differential Revision: https://phab.mercurial-scm.org/D5131

remotefilelog: rename wireproto methods and remaining capabilities This is a mess, in part because there should be more constants throughout. I know we typically do exp- instead of the x_ business in this change, but I also had to use this in some function names, so I figured until I can break that coupling I'd go with this. If it's too unpleasant during review, let me know and I can probably clean it up some more. # no-check-commit due to new foo_bar naming - too hard to avoid right now :( Differential Revision: https://phab.mercurial-scm.org/D5129

remotefilelog: consolidate and rename on-disk store requirement The value of this constant appeared in too many places. While we're here, rename it to be more consistent with our naming conventions for experimental functionality. Differential Revision: https://phab.mercurial-scm.org/D5128

remotefilelog: consolidate and rename bundle2 capability Bonus: we catch a spot where the shallowrepo requirement was being misused as the bundle2 capability. Differential Revision: https://phab.mercurial-scm.org/D5127

remotefilelog: rename capability for legacy ssh file fetching method I think I want to delete this, but for now we'll just rename this so it's easy to tell apart from other strings that have the same value. Differential Revision: https://phab.mercurial-scm.org/D5126

remotefilelog: rip out lz4 support Some methods are left teased out so it's easier to build a migration extension from v1 packs to v2. I also anticipate those methods will be of use if we get around to adding configurable compression engines before we end up jettisoning packs. I think it would make sense to register one-shot `compress` and `decompress` methods on our compression engines in util.py, but indygreg mentioned that might not be straightforward. Differential Revision: https://phab.mercurial-scm.org/D4944

remotefilelog: bump pack file formats to version 2 Drop support for format 0 and 1 packs. Version 2 will be different in that it'll use zlib compression instead of lz4, as the latter isn't really suitable for core. If I can make it work, I'll make compression engines pluggable, but the logic for handling these files is spread out enough it's a little tricky to get that right. Test changes are only due to pack files being renamed. The contents of the packs are the same. Differential Revision: https://phab.mercurial-scm.org/D4943

remotefilelog: avoid hard-coding pack names in tests I'm about to alter the pack format, which alters the content-addressed name of the pack file. In order to reduce my own confusion I found it helpful to use an ls | head pipeline since we always want to inspect the newest pack. Differential Revision: https://phab.mercurial-scm.org/D4942

remotefilelog: remove now-unused wirepack code Differential Revision: https://phab.mercurial-scm.org/D5124

remotefilelogserver: remove pack-serving functionality Differential Revision: https://phab.mercurial-scm.org/D5123

remotefilelog: remove support for fetching packs We've never used this at Google, and it's strictly an optimization that indygreg and I are confident we can handle more elegantly later. Let's rip it out to keep the surface area of the imported remotefilelog small. Some tests have changes because the tests for regular packs and repacking were mixed with tests of fetching packs. I'm pretty sure I've done the right thing here. Differential Revision: https://phab.mercurial-scm.org/D5122

remotefilelog: jettison example cache client We can always reconstruct it from history if it becomes interesting. Differential Revision: https://phab.mercurial-scm.org/D4941

remotefilelog: prune obsolete method Differential Revision: https://phab.mercurial-scm.org/D4940

logtoprocess: use new runbgcommand from procutil Differential Revision: https://phab.mercurial-scm.org/D4939

procutil: port over windows encoding fixes from logtoprocess Differential Revision: https://phab.mercurial-scm.org/D5121

remotefilelog: transplant runbgcommand to procutil While cleaning up the deprecated runshellcommand I noticed a near-clone of this in logtoprocess, so I'm standardizing on what appears to be the newer one by moving it to procutil. Differential Revision: https://phab.mercurial-scm.org/D4938

remotefilelog: remove function that was described as deprecated Differential Revision: https://phab.mercurial-scm.org/D4937

remotefilelog: import pruned-down remotefilelog extension from hg-experimental This is remotefilelog as of my recent patches for compatibility with current tip of hg, minus support for old versions of Mercurial and some FB-specific features like their treemanifest extension and fetching linkrev data from a patched phabricator. The file extutil.py moved from hgext3rd to remotefilelog. This is not yet ready to be landed, consider it a preview for now. Planned changes include: * replace lz4 with zstd * rename some capabilities, requirements and wireproto commands to mark them as experimental * consolidate bits of shallowutil with related functions (eg readfile) I'm certainly open to other (small) changes, but my rough mission is to land this largely as-is so we can use it as a model of the functionality we need going forward for lazy-fetching of file contents from a server. # no-check-commit because of a few foo_bar functions Differential Revision: https://phab.mercurial-scm.org/D4782

store: introduce _matchtrackedpath() and use it to filter store files This patch introduces a function to filter store files on the basis of the path which they are tracking. The function assumes that the entries can be of two types, 'meta/*' and 'data/*' which means it will just work on revlog based storage and not with another storage ways. For the 'data/*' entries, we remove the 'data/' part and '.i/.d' part from the beginning and the end then pass that to matcher. For the 'meta/*' entries, we remove the 'meta/' and '/00manifest.(i/d)' part from beginning and end then call matcher.visitdir() with it to make sure all the parent directories are also downloaded. Since the storage filtering for narrow stream clones is implemented with this patch, we remove the un-implemented error message, add some more tests and add the treemanifest case to tests too. The tests demonstrate that it works correctly. After this patch, we have now narrow stream clones working. Narrow stream clones are a very important feature for large repositories who have good internet connection because they use streamclones for cloning and if they do normal narrow clone, that takes more time then a full streamclone. Also narrow-stream clone will drastically speed up clone timings. Differential Revision: https://phab.mercurial-scm.org/D5139

narrow: only send includepats and excludepats if they are not empty If we send an empty includepats or excludepats argument to getbundle, it's translated to `['']` on the server which causes problems because even though it's empty, bool of that value if True and we end up creating differencematcher with narrowspec.match() which results in unexpected behavior. Differential Revision: https://phab.mercurial-scm.org/D5138

exchange: pass includepats and excludepats as arguments to getbundle() This will help in implementing narrow stream clones. Also narrow extension used to add these arguments, now we add them by default if they are not empty. Since reading includepats and excludepats on the server only works when narrow is enabled, we check if narrow if enabled or not before passing them. Differential Revision: https://phab.mercurial-scm.org/D5119

catapult: add a bit more documentation on how to use catapult tracing Differential Revision: https://phab.mercurial-scm.org/D5217

catapult: introduce HGTESTCATAPULTSERVERPIPE to control run-tests' tracing If unset, it will inherit its value from HGCATAPULTSERVERPIPE (which hg itself also respects). By setting only HGTESTCATAPULTSERVERPIPE, we can get per-command breakdowns of the test runtimes for the whole test suite without overloading the trace file with the contents of the tracing from hg (such as demandimport, etc.) Differential Revision: https://phab.mercurial-scm.org/D5216

catapult: rename 'active' to 'activetrace'; this isn't storing a boolean state (This is an attempt to make it more obvious that the indentation is correct, to prevent a repeat of 97f52862b1bd) Differential Revision: https://phab.mercurial-scm.org/D5215

catapult: fix broken run-tests catapult tracing Commit 97f52862b1bd thought this block was misindented, but it was not; the indentation after that commit means we never log a catapult trace for individual commands. Also, we've never emitted the "end" trace line when the test was finished, so the trace viewer claims that these "did not finish", fixing that as well. Differential Revision: https://phab.mercurial-scm.org/D5214

test: fix self._testdir to use the right mercurial library during testing Currently if you run tests from some other directory other than the `../tests/`, you will get a warning stating ``` warning: Testing with unexpected mercurial lib: mercurial (expected /tmp/hgtests.xxxxxx/install/lib/python/mercurial) ``` This is because the current directory being added to the 'PATH', if the `self._testdir != runtestdir`, owing to this line ``` if self._testdir != runtestdir: path = [self._testdir] + path ``` Also say you ran the tests from the hg base directory, because directory is being added in the PATH (see the above snippet, at that stage the `self._testdir` has the value as `cwd`, owing to a faulty initialization). And since the current directory already has the 'hg', that is used in place of the hg that is installed for the testing purposes in `/tmp/hgtests.xxxxxx/...`. Differential Revision: https://phab.mercurial-scm.org/D5199

tests: conditonalize a difference in test-merge-tools.t on Windows

statprof: clean up unicode/bytes a little I'm not really sure how this worked before, but something perturbed it and what I've got in this change I believe is a little tidier. This fixes test-profile.t on Python 3. Differential Revision: https://phab.mercurial-scm.org/D5210

statprof: add a couple of asserts to avoid storing unicodes I don't feel strongly about this change, so it'd be fine to drop it during review, but it was _extremely_ helpful in drafting the next change. Differential Revision: https://phab.mercurial-scm.org/D5209

tests: add some helpful `|| cat` bits to test-profile.t This way if the hg invocation crashes, you get to see a stacktrace without having to edit the test. Differential Revision: https://phab.mercurial-scm.org/D5208

tests: skip wireproto clientreactor tests on Python 3.6.0-3.6.3 inclusive See comment next to the if statement for sad details. Differential Revision: https://phab.mercurial-scm.org/D5207

contrib: tweak import-checker to always use bytes for module names We could go the other route and make embedded() return this as a bytes, but then it would be harder to portably doctest, so I prefer this option. Differential Revision: https://phab.mercurial-scm.org/D5206

contrib: fix import-checker to not b'' module names on Python 3 Caught by the doctests. Differential Revision: https://phab.mercurial-scm.org/D5205

tests: add a critical flush() to run-tests.py to make output stable on py3 Differential Revision: https://phab.mercurial-scm.org/D5204

merge-tools: when calling external merge tool, describe the resolve inputs It is a common complaint that a user will be running some operation (histedit, rebase, evolve, etc.), get into a merge-conflict situation, and not understand what they are seeing - it is possible that the merge tool is configured to display the hash, but it's difficult for most merge tools to display a good snippet of the description. In the worst case, configuring this template will lead to output that is immediately covered by a terminal application, maybe the user can hit ctrl-z to see it. In the common case, the output will be in a terminal window and a GUI program will start, and it should be possible to view both the terminal and the GUI program at the same time. Differential Revision: https://phab.mercurial-scm.org/D5094

templatekw: deprecate p1rev/p2rev/p1node/p2node in favor of p1/p2

templatekw: add p1/p2 keywords which switches the current ctx This is just an example of mappingdict. I have no idea what should be displayed as {p1|json}. Currently it is an empty dict since {'ctx'} isn't displayable, which is clearly useless and should be changed later.

templater: add wrapper for a single template mapping This can be used to nest template mappings without inserting a sequence-like layer. See the next patch for example.

templatekw: extract internal "{rev}:{node|formatnode}" template to constant This will be used later.

tweakdefaults: remove commands.resolve.mark-check=abort, it is too broken See issue6020 for the current case. I don't want to continue attempting to fix this on the stable branch, so I'm removing from tweakdefaults and will send fixes meant for the default branch and 4.9. Differential Revision: https://phab.mercurial-scm.org/D5225

resolve: when resolve.mark-check=abort, downgrade to warning if pats specified Previously, with --config resolve.mark-check=abort, running `hg resolve -m foo` would abort and emit a message saying to use --all. This command does not work, though: `hg resolve -m foo --all`, and it's really weird for --all to be the "--force" flag. My original goal with the option was to make it so that `hg resolve -m` (no filename arguments) was safer, which is why --all is used; in my mind, `hg resolve -m foo` should always mark it as resolved, and `--all` is how you specify "all the files", so that's why I chose `hg resolve -m --all` as the way out of `hg resolve -m` aborting. This commit makes all of this work the way it was meant to in my head :) Differential Revision: https://phab.mercurial-scm.org/D5218

test: remove changes preparing the drop of `HGMERGE` These changes are no longer necessary so we better drop them.

run-tests: define the default merge tool through configuration Using the `HGMERGE` environment variable generates confusion as it overrides any value set through configuration. By setting the default value through the default HGRC, the usual overriding rules apply and it should reduce confusion.

run-tests: explicitly declare the list of dropped environment variable It will make the list clearer and more maintainable.

test: drop usage of `HGMERGE` in `test-lfconvert.t` Using configuration instead of environment variable has a strange effect on the output, but no impact on the end result.

test: drop usage of `HGMERGE` in `test-merge-types.t` Using configuration instead of environment variable has a strange effect on the output, but no impact on the end result.

test: use the "correct" merge tool in `test-rebase-detach.t` The value of `HGMERGE` overrides the value passed through --config. We are about to drop this `HGMERGE` environment variable so we update the value used in config to match what is currently in use. This is another example of confusion introduced by the `HGMERGE` environment variable.

test: also deactivate `ui.merge` when testing merge tool We are about to introduce a default config for `ui.merge`. Since `test-merge-tools.t` is about testing merge configuration, we need to make sure it won't interfere.

tests: adjust merge tool config in test-largefiles-update.t Previously, the `ui.merge=internal:fail` configuration was shadowed by the the `HGMERGE=internal:merge` environment variable. We would like to remove this usage of `HGMERGE` variable because it is error-prone (eg: this very test). We start by cleaning up test independently to avoid large churn when the change happens.

extensions: include current version in "invalid version" message It is "not so rare" for the mercurial version to be badly detected at build time. In such case, version check for extensions gets confused. To help pinpoint the error, we now include the Mercurial's version number in the error message.

obsolete: prefetch the repo.obsstore used in phasedivergence loop The speedup is probably quite negligible, but it cannot hurt.