tests: conditionalize out tests that msys is mangling This was exposed by ac0a87160012. The paths for convert and ssh respectively are being turned into: $TESTTMP\bzr+ssh:\foobar@selenic.com\baz\.hg 'C:\\C:\\Users\\Matt\\AppData\\Local\\Temp\\hgtests.8awa9x\\child1\\test-ssh-bundle1.t-sshv2\\nonexistent\\.hg The errno value raised is 123, and the message is The filename, directory name, or volume label syntax is incorrect

test-absorb: stabilize for no-execbit platforms

test-graft: add a missing output line for Windows

share: allow more than one level of directories to be created

clone: allow local cloning to create more than one level of directories I figure cloning a remote repository is more common, thus it's more likely that some people might be relying on the less restrictive behavior. Additionally, `hg init` will also create more than one level of missing directories. I also have a use case for reading the subrepos from .hgsub, and sharing them into the normal nested location on the server. SCM Manager doesn't host subrepos in the normal nested location, which is nice for deduplicating the repository data, but confuses `hg verify`. Some of the subrepos are in the root of the repositories, while others are one or two directories deep. So not having to build up the parent path first is desirable.

tests: demonstrate an inconsistency when cloning to a missing directory tree I noticed that `hg share` is unable to create more than one missing directory on the path, and thought it was inconsistent with clone. It turns out that the path for copying/linking the remote store has the same limitation, but cloning from a remote repo doesn't.

tests: stabilize test-merge-tools.t on Windows More fun with `hg import --bypass` to work around Windows limitations. The diffs were generated on Linux, and had a tab to terminate the `+++b/...` lines. But check-code complained about trailing whitespace, and it seems to run without them.

dagutil: remove module The previous commit removed the last consumer of this module. .. api:: dagutil module has been removed Some functionality has been moved to the dagop module. Other functionality can be accomplished via revsets. Differential Revision: https://phab.mercurial-scm.org/D4330

dagop: port revlogdag.linearize() to standalone function The code should functionally be identical. We also port the one consumer in changegroup to use the new standalone function. After this commit, dagutil is no longer used! Differential Revision: https://phab.mercurial-scm.org/D4329

dagutil: use revlog.parentrevs() for resolving parent revisions And remove parents() since it is no longer used. revlog.parentrevs() is almost the same as parents(). The main difference is that parentrevs() can return nullrev. dagop.headrevs() already handles nullrev. We add an inline check for nullrev in the other call site to account for the difference. .. api:: parents() removed from dagutil classes Use parentrevs() on the storage object instead. Differential Revision: https://phab.mercurial-scm.org/D4328

dagop: extract headsetofconnecteds() from dagutil The functionality for resolving the set of DAG heads from a subset simply requires a function to resolve parent revisions. Let's establish a function in the dagop module to do this, which seems to be where generic DAG functionality goes these days. Differential Revision: https://phab.mercurial-scm.org/D4327

setdiscovery: precompute children revisions to avoid quadratic lookup Moving away from dagutil a few commits ago introduced quadratic behavior when resolving children revisions during discovery. This commit introduces a precompute step of the children revisions to avoid the bad behavior. I believe the new code should have near identical performance to what dagutil was doing before. Behavior is still slightly different because we take into account filtered revisions. But this change was made when we moved off dagutil. I added a comment about multiple invocations of this function redundantly calculating the children revisions. I believe this potentially undesirable behavior was present when we used dagutil, as the call to inverse() previously in this function created a new object and required computing children on every invocation. I thought we should document the potential for a performance issue rather than let it go undocumented. Differential Revision: https://phab.mercurial-scm.org/D4326

dagutil: remove unused classes We only directly use revlogdag in changegroup code. We don't need all this abstraction. So remove various classes and levels of inheritance. Differential Revision: https://phab.mercurial-scm.org/D4325

setdiscovery: use revset for resolving DAG heads in a subset This was the final use of dagutil in setdiscovery! For reasons I didn't investigate, feeding a set with nullrev into the heads() revset resulted in a bunch of tests failing. Filtering out nullrev from the input set fixes things. Differential Revision: https://phab.mercurial-scm.org/D4324

dagutil: remove ability to invert instances The previous commit removed the last consumer of this feature. .. api:: remove inverse() methods from classes in dagutil Differential Revision: https://phab.mercurial-scm.org/D4323

setdiscovery: don't use dagutil for parent resolution _updatesample()'s one remaining use of revlogdag is for resolving the parents of a revision. In 2 cases, we actually resolve parents. In 1, we operate on the inverted DAG and resolve children. This commit teaches _updatesample() to receive an argument defining the function to resolve "parent" revisions. Call sites pass in changelog.parentrevs() or a wrapper around changelog.children() accordingly. The use of children() is semantically correct. But it is quadratic, since revlog.children() does a range scan over all revisions starting at its input and effectively calls parentrevs() to build up the list of children. So calling it repeatedly in a loop is a recipe for bad performance. I will be implementing something better in a subsequent commit. I wanted to get the porting off of dagutil done in a way that was simple and correct. Like other patches in this series, this change is potentially impacted but revlogdag's ignorance of filtered revisions. The new code is filtering aware, since changelog's revs() (used by children() will skip filtered revisions and therefore hidden children won't appear. This is potentially backwards incompatible. But no tests fail and I think this code should respect visibility. Differential Revision: https://phab.mercurial-scm.org/D4322

setdiscovery: use revsets for computing a subset's heads and roots revlogdag.headsetofconnecteds() obtains the set of DAG heads in a given set of revs. revlogdag.inverse() inverts the DAG order and makes headsetofconnecteds() obtain the DAG roots in a given subset. Both of these can be expressed with a revset. Like other patches in this series, revlogdag uses revlog.index and thus doesn't take filtering into account. Revsets do. So there is a chance for regressions with this change. But no tests fail. And I think this code should take filtering into account since hidden changesets shouldn't factor into discovery (unless operating on the hidden repository). Differential Revision: https://phab.mercurial-scm.org/D4321

dagutil: remove heads() and localsubset from revlogdag.__init__ The previous commit removed the last consumer of this API. I'm not going to mark as API incompatible because I doubt anybody used this functionality (outside of possibly passing an argument to revlogdag.__init__). I intend to remove revlogdag later in this series and its API annotation will cover this one. Differential Revision: https://phab.mercurial-scm.org/D4320

setdiscovery: pass head revisions into sample functions This eliminates the last remaining consumer of heads() and related functionality in dagutil. Differential Revision: https://phab.mercurial-scm.org/D4319

setdiscovery: pass heads into _updatesample() In preparation for eliminating the use of dagutil. Since _takefullsample() operates on the inverted DAG, it is easier to have the caller pass in the relevant set instead of teaching _updatesample() about when to invert the DAG. We keep the logic identical for now: future commits will remove dagutil. Differential Revision: https://phab.mercurial-scm.org/D4318

setdiscovery: use a revset for finding DAG heads in a subset The march towards moving away from dagutil continues. Like other patches moving us away from dagutil, there is the potential for regressions to occur because revlogdag's headsetofconnecteds() uses revlog.index, which doesn't take filtering into account. The revset layer does. But no tests fail, so we appear to be in the clear. Differential Revision: https://phab.mercurial-scm.org/D4317

setdiscovery: reflect use of revs instead of nodes This code all operates on revision numbers. Update variable names and comments accordingly. Differential Revision: https://phab.mercurial-scm.org/D4316

dagutil: remove descendantset() and ancestorset() descendantset() is unused after the previous commit. And ancestorset() was only used by descendantset(), so it can be removed as well. .. api:: descendantset() and ancestorset() removed from dagutil Use a revset instead when operating on the changelog. Or use various functionality in the ancestor or dagop modules. Differential Revision: https://phab.mercurial-scm.org/D4315

setdiscovery: use a revset instead of dagutil.descendantset() This is the only use of descendantset() in the repo. Strictly speaking, the revset behaves slightly differently than dagutil. The reason is that dagutil is using revlog.index for DAG traversal and this data structure isn't aware of visibility / filtering. So it can operate on revisions it shouldn't operate on. But our test coverage of this code is pretty comprehensive and this change causes no tests to fail. So I think we are good. Also, the revset parser failed to parse `%ld:: - %ld::`, hence the use of descendants(). I'm not sure if that is a feature or a bug. Differential Revision: https://phab.mercurial-scm.org/D4314

setdiscovery: don't use dagutil to compute heads This is a relatively trivial operation to perform. We don't need to use dagutil. This brings us one step closer to eliminating dagutil. We still need to populate the heads on revlogdag because later functionality relies on it. Differential Revision: https://phab.mercurial-scm.org/D4310

dagutil: remove nodeset() AFAICT this was unused since the code was introduced by cb98fed52495 in 2011! Differential Revision: https://phab.mercurial-scm.org/D4309

debugcommands: use a revset instead of dagutil All this code was doing was finding the nodes that are heads from the ancestors of an input set. This can easily be expressed with a revset without having to go through dagutil. This was the last use of ancestorset() outside of dagutil itself. Differential Revision: https://phab.mercurial-scm.org/D4308

dagutil: remove internalize() and internalizeall() The previous commit removed the last consumer. .. api:: removed internalize() and internalizeall() from dagutil Use .rev(node) on storage objects to convert nodes to revisions. Differential Revision: https://phab.mercurial-scm.org/D4307

setdiscovery: don't use dagutil for node -> rev conversion The node -> rev conversion is possible using standard storage APIs and doesn't need to involve the dagutil module. Differential Revision: https://phab.mercurial-scm.org/D4306

dagutil: remove externalize() and externalizeall() They are unused after the previous commit. .. api:: externalize() and externalizeall() removed from dagutil Use .node() on a storage primitive to perform revision to node conversions. Differential Revision: https://phab.mercurial-scm.org/D4305

setdiscovery: don't use dagutil for rev -> node conversions We don't need to use dagutil to perform a simple rev -> node conversion. I haven't measured, but the new code is likely faster, as we avoid extra function calls and avoid some attribute lookups. Differential Revision: https://phab.mercurial-scm.org/D4304

exchange: don't use dagutil We were only using it for simple node -> rev and parent revision lookups. These are exposed via the storage interface and we don't need to go through dagutil. Differential Revision: https://phab.mercurial-scm.org/D4303

revlog: only consider the span of the delta section Since the number of snapshots is limited we can exclude them from the logic checking size and number of reads. Limiting the span computation to the delta section will allow for further optimization.

revlog: ensure intermediate snapshot have decreasing size If the intermediate snapshot is bigger than the previous one, there is likely a better snapshot to be made at a different level.

revlog: bound number of snapshots in a chain To limit the number of snapshot chained, we enforce them to be smaller and smaller. This guarantee the number of snapshot in a chain will be bounded to a small number.

revlog: compute snapshot depth on delta info We need the information to be available when choosing delta.

debugrevlog: display snapshot details per depth This help in understanding the final structure of build manifest. All data about snapshot (full and intermediate) are gathered into a sub-list for clarity. Since we do not produce such snapshots yet, the only thing changing in test output is the way the information is presented.

revlog: add a method to retrieve snapshot depth Some snapshot property (eg: maximum size) will depend on their depth.

debugrevlog: include information about intermediate snapshots As we are about to create intermediate snapshots, we need to have a way to debug them. We start by adding very simple debug output and more detailed output will comes in next changesets.

revlog: also detect intermediate snapshots Also detect intermediate-snapshot done against another previous snapshot. Doing an intermediate snapshot instead of a full one can reduce the number of full snapshots we need. They are especially useful for content with a lot of churn on the same line (eg: the manifest) where having a delta over multiple revisions can end up being significantly smaller than the sum of these revision deltas. A revlog built using intermediate snapshots can be a bit smaller and reuse snapshot much more efficiently. This last property is useful combined with constraints on chain length. Using intermediate snapshot can produce repository with delta chain ten times shorter without impact on the storage size. Shorter chain lengths are faster to restore, greatly improving read performance. This changesets (and the following ones) focus on getting the core principle of intermediate snapshots into Mercurial core. Later changeset will introduce the strategy to create them.

revlog: add a method to tells whether rev is stored as a snapshot For now we only have one type of snapshot: full snapshot versus nullrev. However we are looking into adding intermediate snapshot where a large diff against another snapshot is performed instead of storing a full new text. The conditional is a bit strange and is done in order to help readability of a some later changesets.

debugrevlog: fix for non-manifest object The `filelog` object is no longer an actual revlog. Instead, the actual revlog is stored in the `_revlog` attribute.

merge with stable

remotephase: avoid full changelog iteration (issue5964) Changeset 88efb7d6bcb6 introduced a performance regression by triggering a full ancestors walk. This changeset reworks this logic so that we no longer walk down the full changelog. The motivation for 88efb7d6bcb6, issue5939, is still fixed. mercurial compared to a draft repository ---------------------------------------- 8eeed92475d5: 0.012637 seconds 88efb7d6bcb6: 0.202699 seconds (x16) 46da52f4b820: 0.215551 seconds (+6%) this code: 0.008397 seconds (-33% from base) The payload size reduction we see in `test-bookmarks-pushpull.t` comes from a more aggressive filter of nullid and is harmless.

nodes: expand/comment the magic nodes so they are more easily searchable We just encountered `000000000000modified`, and it was quite annoying to search for these, even though I knew they existed. For those that don't know that they exist, this is essentially impossible to search for :) (Technically we encountered it in its hex form, 3030303030303030303030306d6f646966696564, so I'm adding comments with those forms in case that's helpful to people in the future). Differential Revision: https://phab.mercurial-scm.org/D4331

revlog: obtain the first node at the lowest layer while building pure nodemap Just for clarity. This doesn't matter in practice since changelog.nodemap is accessed *before* filtered revisions get ready.

revlog: fix pure nodemap to not access missing index entry This bug was revealed by a3dacabd476b and a1f934573c0b.

changelog: remove copy of revlog.nodemap() It's been there since 2012, "clfilter: introduce `filteredrevs` attribute on changelog." I don't think we can apply changelog filtering to nodemap at this level, so this patch removes the nodemap stub completely.

remotephase: fast path newheads computation in simple case (issue5964) Changeset 88efb7d6bcb6 fixed the logic of `phases.newheads` but greatly regressed its performance (up to many order of magnitude). The first step to fix the regression is to exit early when there is no work to do. If there are no heads to filter or not roots to filter them, we don't have to do any work. This fixes the regression when talking to an all public changeset. The performance is even better than before. pypy, compared to an all public repo ------------------------------------ 8eeed92475d5: 0.005758 seconds 88efb7d6bcb6: 0.602517 seconds (x104) this code: 0.001508 seconds (-74% from base) mercurial compared to an all public repo ---------------------------------------- 8eeed92475d5: 0.000577 seconds 88efb7d6bcb6: 0.185316 seconds (x321) this code: 0.000150 seconds (-74% from base) The performance of newheads, when actual computations are required, is fixed in the next changeset.

perf: add a perfphasesremote command This command measure the time we spend analysing remote phase during push and pull and display some information relevant to this computation. The `test-contrib-perf.t` expected output has to be updated but I do need these module for this perf command.

sparse-revlog: fix delta validity computation When considering the validity of a delta with sparse-revlog, we check the size of the largest read. To do so, we use some regular logic with the extra delta information. Some of this logic was not handling this extra delta properly, confusing it with "nullrev". This confusion with nullrev lead to wrong results for this computation but preventing a crash. Changeset 781b2720d2ac on default revealed this error, crashing. This changeset fixes the logic on stable so that the computation is correct (and the crash is averted). The fix is made on stable as this will impact 4.7 clients interacting with sparse-revlog repositories (eg: created by later version).

branchmap: explicitly convert file into iterator Follows up 2a4bfbb52111. This is required for httprangereader, which is not an iterable itself.

branchmap: close cache file properly Follows up 2a4bfbb52111.

branchmap: strip '\n' read from cache file as before Follows up 2a4bfbb52111.

rebase: do not pass in user option to rollback in-memory merge conflict Nothing passed before e9e742bd0501.

rebase: add test for in-memory merge conflicts

rebase: call _dorebase() properly This fixes a regression from e9e742bd0501 where we failed to pass all necessary arguments to _dorebase(). Differential Revision: https://phab.mercurial-scm.org/D4302

context: make sure file is not deleted while checking path conflicts If a file is deleted and a directory of same name is created in the same commit, IMM thinks of that as a file conflict, however the file is deleted and hence the directory can be created. The test change demonstrate the fix. Differential Revision: https://phab.mercurial-scm.org/D4300

tests: demonstrate that IMM needs to be smarter with path conflicts When we try to rebase a commit which deletes an existing file and make a directory of the same name, rebase with IMM aborts. It should work fine just like the without IMM case. Differential Revision: https://phab.mercurial-scm.org/D4299

tests: don't create new repo inside existing repo in test-rebase-inmemory.t Differential Revision: https://phab.mercurial-scm.org/D4298

tests: remove test-py3-commands.t This was a smoke test for early in the Python 3 porting effort, before anything actually worked. Now that we've got over half the testsuite passing, this test has outlived its utility. Differential Revision: https://phab.mercurial-scm.org/D4288

tests: update test-check-py3-compat.t output in the py3exe branch This hasn't been maintained in a while, it looks like. Differential Revision: https://phab.mercurial-scm.org/D4289

overlayworkingctx: fix exception in metadata-only inmemory merges (issue5960) If there was a metadata-only mutation, such as +x or -x on a file, we would create a cache entry with None for data, and this would cause problems later on when some code tried to run fctx.data() or similar, and was expecting a string. My original fix for this involved passing data=self._wrappedctx[path].data() in setflags(), but this version seems slightly better - this way, if we ever call write() and then call setflags(), we don't destroy the data that we wrote that's in the cache. I haven't verified that other fields aren't destroyed, such as date or flags :) Differential Revision: https://phab.mercurial-scm.org/D4287

filemerge: show actual capabilities of internal merge tools This information is useful to know which internal merge tools can be applied safely on binary files and/or symlinks.

filemerge: add config knob to check capabilities of internal merge tools For historical reason, Mercurial assumes capabilities of internal merge tools as below while examining rules to decide merge tool, regardless of actual capabilities of them. =============== ====== ======== specified via binary symlinks =============== ====== ======== --tool o o HGMERGE o o merge-patterns o (*) x (*) ui.merge x (*) x (*) =============== ====== ======== This causes: - unintentional internal merge tool is chosen for binary files via merge-patterns section of configuration file - explicit configuration of internal merge tool for symlinks is ignored unintentionally But on the other hand, simple "check capability strictly" might break backward compatibility (e.g. existing merge automations), because it changes the result of merge tool selection. Therefore, this patch adds config knob "merge.strict-capability-check" to control whether capabilities of internal merge tools should be checked strictly or not. If this configuration is true, capabilities of internal merge tools are checked strictly in (*) cases above.

filemerge: show warning if chosen tool has no binary files capability While matching patterns in "merge-patterns" configuration, Mercurial silently assumes that all merge tools have binary files capability. This implementation comes from 5af5f0f9d724 (or Mercurial 1.0). At failure of merging binary files with incorrect internal merge tool, there is no hint about this silent ignorance of binary files capability. This patch shows warning message, if chosen internal merge tool has no binary files capability. This will help users to investigate why a binary file isn't merged as expected.

filemerge: add the function to examine a capability of a internal tool For "symlink" and "binary" capabilities, _toolbool() can not examine these of internal merge tools strictly, because it examines only configurations in "merge-tools" section. Users can configure them explicitly as below for example, but this is not ordinary usage and not convenient: [merge-tools] :other.symlink = true :other.binary = true This patch adds hascapability() internal function, which can examine actual capabilities of a internal merge tool strictly. At this patch, hascapability() is still used with "strict=False". Subsequent patches use it with "strict=True".

filemerge: set actual capabilities of internal merge tools This information is used to detect actual capabilities of internal merge tools by subsequent patches. For convenience, this patch assumes that merge tools typed as "nomerge" have both binary files and symlinks capabilities.

help: describe more detail about capabilities while deciding merge tool "hg help merge-tools" describes as below: (internal merge tools) will by default not handle symlinks or binary files. But in some cases, Mercurial assumes that internal merge tools have one or both of these capabilities. "hg help merge-tools" also describes as below, for matching patterns in merge-patterns configuration section. But this is not sufficient. Here, binary capabilities of the merge tool are not considered. This patch describes more detail about capabilities while deciding merge tool.

tests: un-glob patchbomb test lines that were only globbing a hostname Differential Revision: https://phab.mercurial-scm.org/D4296

tests: force a stable hostname in patchbomb tests No visible output changes in this commit because everything is globbed away, but on Python 3 the stable hostname will mean that the headers don't trigger RFC2822 multi-line mode because they'll always be consistently short. Differential Revision: https://phab.mercurial-scm.org/D4295

patchbomb: allow using HGHOSTNAME to force a hostname I'll update run-tests.py to set this globally to stabilize some tests. The variable name is intentionally generic because I suspect we should generalize this to other tests. Differential Revision: https://phab.mercurial-scm.org/D4294

patchbomb: extract function for generating message-id Differential Revision: https://phab.mercurial-scm.org/D4293

rebase: cover restorestatus() by lock to prevent it from being updated To prevent it from being updated by another process `restorestatus()` is moved under lock. Differential Revision: https://phab.mercurial-scm.org/D4282

branchmap: load branchmap as an iterable This avoids reading all the file into memory if the cache turns out to be invalid. Differential Revision: https://phab.mercurial-scm.org/D4281

perf: time loading branchmap caches Differential Revision: https://phab.mercurial-scm.org/D4280

tests: add conditional output when simplestore extensions is loaded This drops the number of failures with this extension to 3. Differential Revision: https://phab.mercurial-scm.org/D4286

tests: conditionalize extension tests for extra extensions If extra extensions are loaded (e.g. via --extra-config-opt), the tests conditionalized in this commit fail in ways that are dependent on the extensions that are loaded. So let's skip them when that scenario is present. This drops the number of failures for the simplestorerepo.py extension to 4. Differential Revision: https://phab.mercurial-scm.org/D4285

commit: try hard to reuse p1 manifest if nothing changed This is all for commit reproducibility on "hg convert". With this change, p1 manifest is reused if ctx.files() *to be committed* is empty, and if new manifest entry is identical to p1. This is important property for "hg convert" since memctx.files() built from a convert source may be either a) more narrowed thanks to a committed ctx.files() which provides more accurate status, or b) containing redundant files because of sloppy filtering on e.g. octopus merge.

merge: add tests for commit with no content change It isn't easy to say when to reuse the p1 manifest. Basically, that's only when wctx.files() is empty, but we need to know that wctx.files() is not the same as repo['.'].files() after the commit. This patch adds several examples of commits with empty ctx/wctx.files(). I don't think this is exhaustive, but it contains at least one failure mode in which a converted repo result in a different hash. I also note that the manifest revlog does NOT follow the DAG shape of the changelog since p1 manifest is reused if wctx.files() is empty even at merge. I don't know whether it is intentional or not, but it's the behavior since 2011, 301725c3df9a "localrepo: reuse parent manifest in commitctx if no files have changed."

commit: add debug message regarding manifest reuse

mail: convert encoding.encoding to sysstr

mail: call s.decode('ascii') explicitly to see if s is an ascii bytes

mail: pass in addr to _addressencode() in bytes _addressencode() doesn't process a unicode addr well. For example, acc.encode('ascii') would raise UnicodeEncodeError if acc was a unicode. This patch temporarily restores the pre-952bf3c948f0 _addressencode(). Several tests would be broken on Python 3.

mail: remove redundant bytesurl() from addrlistencode() _addressencode() returns a bytes.

patchbomb: really use BytesGenerator API It wraps around Generator type.

byteify-strings: prevent "__name__ == '__main__'" from being transformed This was okay for import-time code transformer, but shouldn't be applied to source code.

merge with stable

rebase: turn off inmemory flag on --stop Guessing from the inline comment, "in-memory rebase is not compatible with resuming rebases", in-memory rebasing should be disabled.

rebase: use action variable to select things to do

rebase: consolidate check for --dry-run/--confirm on abort/stop/continue

rebase: consolidate check for --abort/--stop/--continue conflicts

rebase: do not set internal dryrun flag by --confirm This prepares for cleaning up option checking.

rebase: add test to show --stop moves bookmarks Added tests to show that --stop option moves bookmarks of rebased csets to their succs. Differential Revision: https://phab.mercurial-scm.org/D3982

rebase: include --stop option in documentation Differential Revision: https://phab.mercurial-scm.org/D3970

rebase: raise error for options conflicting with --stop Make sure --stop feature raise error for conflicting options --continue, --abort, --confirm, --dry-run. Tests are added to reflect the same. Differential Revision: https://phab.mercurial-scm.org/D3969

rebase: add --stop option to stop rebase at any point (issue5206) Before this patch, during a rebase if you get a point where you can't figure out what to do next, then either you had to complete your series or abandon all the work you have done during this rebase. Now, with this feature you can stop at any point by keeping the rebased csets and mark original csets as obsolete. And if you don't have evolution extension enabled then you can use --keep option as an alternative which will keep original csets too, instead of marking them obsolete. Differential Revision: https://phab.mercurial-scm.org/D3959

statprof: cleanup string construction Use string substitutions instead of string additions.

addremove: add associated color for the new labels We use classic color: green is added, red is removed.

remove: add a label for messages about removed files Keeping consistency between addremove and remove seems a good idea.

add: add a label for messages about added files Keeping consistency between addremove and add seems a good idea.

addremove: add labels for messages about added and removed files This is the first step to add color for add and remove output.

revlog: filter out "invalid" delta base candidates There are bases that we know won't produce a good delta chain. For example, if the base is already bigger than twice the size of the text we store, we know the resulting delta chain will never be valid. We might make the check a bit more powerful and generic in the future, but this looks a good start. In particular, empty file (size 0) will never find a good base, so we should stop spending time trying to find one.

revlog: use a symbolic constant for the deltas/text ration We are about to use it somewhere else, we should as well make it easier to access and change.

revlog: do not search for delta for empty content We won't find any useful base to store an empty text. So we should not even try to.

revlog: split and document good delta conditional The logic is still identical, but having each conditional on its own helps to document them and will help to edit them in the future.

revlog: skip over empty revision when looking for delta base There is no point in keeping an empty revision in the middle of a chain since they won't contribute any data. So we filter them out when looking for a valid base delta.

debugrevlog: display details about empty revision We now display details about the course of emptiness (empty text or empty delta).

debugrevlog: track empty revlog entries A revlog entry can be "empty" for two reasons: * the stored text is empty * we found another entry with the exact same content Tracking them separately make revlog content clearer.

debugrevlog: document some of the variable used This help to understand the code.

revlog: drop compatibility for `revlog.descendant` (API) As advertised, the method is dropped in 4.8.

context: drop compatibility for `context.descendant` (API) As advertised, the method is dropped in 4.8.

cmdutil: remove _updatecleanmsg() which is no longer used anywhere

cmdutil: fix weird indent in _mergemsg()

cext: fix a warning about differing const qualifiers on Windows The prototype takes a 'void *', but self->offsets is a 'const char **'. mercurial/cext/revlog.c(2011) : warning C4090: 'function' : different 'const' qualifiers

cext: fix most truncation warnings in revlog on Windows There's one more, and I'm not sure why it isn't being tripped on other platforms: mercurial/cext/revlog.c(430) : warning C4244: '=' : conversion from 'Py_ssize_t' to 'char', possible loss of data

cext: fix Windows warning about implicit conversion of 32-bit shift to 64 bit mercurial/cext/revlog.c(1541) : warning C4334: '<<' : result of 32-bit shift implicitly converted to 64 bits (was 64-bit shift int ended?)

index: make capacity argument to nt_init be measured in revisions The nodetree's internal capacity field is measures in nodetree nodes, which is not something the caller should have to know about. Differential Revision: https://phab.mercurial-scm.org/D4166

index: avoid duplicating capacity-growth expression We were duplicating the "*2" instead of reusing it. It's overflow-safe to reuse as long as the growth factor (i.e. currently 2) is not larger than sizeof(nodetreenode) (currently 64 or 128). Differential Revision: https://phab.mercurial-scm.org/D4165

index: move check for too large capacity into nt_init() It's clearer to have the check just before the allocation happens. Differential Revision: https://phab.mercurial-scm.org/D4164