filemerge: mark internal-only config option

profiler: mark developer-only config option

debugger: mark developer-only option (and rearrange comment)

commandserver: mark developer-only logging option

generaldelta: mark experimental reordering option

bundlerepo: mark internal-only config variable

win32text: mark deprecated extension option deprecated

transplant: mark some undocumented options deprecated

mq: tweak config reading to make check-config happy The not-really-a-bool handling here upsets the type checker.

patchbomb: make sure all users of smtp.verifycert agree on the default

patchbomb: mark ancient option deprecated This just exists for backwards compatibility with the earliest versions of patchbomb.

histedit: mark defaultrev option experimental

changegroup: compute seen files as changesets are added (issue4750) Before this patch, addchangegroup() would walk the changelog and compute the set of seen files between applying changesets and applying manifests. When cloning large repositories such as mozilla-central, this consumed a non-trivial amount of time. On my MBP, this walk takes ~10s. On a dainty EC2 instance, this was measured to take ~125s! On the latter machine, this delay was enough for the Mercurial server to disconnect the client, thinking it had timed out, thus causing a clone to abort. This patch enables the changelog to compute the set of changed files as new revisions are added. By doing so, we: * avoid a potentially heavy computation between changelog and manifest processing by spreading the computation across all changelog additions * avoid extra reads from the changelog by operating on the data as it is added The downside of this is that the add revision callback does result in extra I/O. Before, we would perform a flush (and subsequent read to construct the full revision) when new delta chains were created. For changelogs, this is typically every 2-4 revisions. Using the callback guarantees there will be a flush after every added revision *and* an open + read of the changelog to obtain the full revision in order to read the added files. So, this increases the frequency of these operations by the average chain length. In the future, the revlog should be smart enough to know how to read revisions that haven't been flushed yet, thus eliminating this extra I/O. On my MBP, the total CPU times for an `hg unbundle` with a local mozilla-central gzip bundle containing 251,934 changesets and 211,065 files did not have a statistically significant change with this patch, holding steady around 360s. So, the increased revlog flushing did not have an effect. With this patch, there is no longer a visible pause between applying changeset and manifest data. Before, it sure felt like Mercurial was lethargic making this transition. Now, the transition is nearly instantaneous, giving the impression that Mercurial is faster. Of course, eliminating this pause means that the potential for network disconnect due to channel inactivity during the changelog walk is eliminated as well. And that is the impetus behind this change.

revlog: add support for a callback whenever revisions are added A subsequent patch will add a feature that performs iterative computation as changesets are added from a changegroup. To facilitate this type of processing in a generic manner, we add a mechanism for calling a function whenever a revision is added via revlog.addgroup(). There are potential performance concerns with this callback, as using it will flush the revlog after every revision is added.

crecord: throws error instead of crashing for large diffs Before this patch, crecord was crashing for large diffs (30k lines on my laptop). This patch catches the exception raised in that case and use the error reporting mechanism introduced in the previous patch for notifying the user of the issue. It is not possible to add a test for that for now as we don't yet have full blown ui tests for the curses interface.

crecord: add error reporting for failure in curses interface initialization Before this patch, we couldn't report to the user any error that occurred: - after we enabled the curses interface but - before the interface is set up and drawn This patch, provides a way to set errors that happens during the initialization of the interface and log them once the curses interface has been displayed.

revset: parse nullary ":" operator as "0:tip" This is necessary for compatibility with the old-style parser that will be removed by future patches.

parser: take suffix action if no infix action is defined If no infix action is defined, a suffix action isn't ambiguous, so it should be taken no matter if the next token can be an operand. This is exactly the same flow as prefix/primary handling. This change has no effect now because all suffix tokens have infix actions.

parser: reorder infix/suffix handling to be similar to prefix/primary flow It can be exactly the same flow as the prefix/primary handling. A suffix action is accepted only if the next token never starts new term.

parser: resolve ambiguity where both prefix and primary actions are defined If both actions are defined, a primary-expression action is accepted only if the next token never starts new term. For example, parsed as primary expression: ":" # next token 'end' has no action "(:)" # next token ')' has no action ":+y" # next token '+' is infix operator parsed as prefix operator: ":y" # next token 'y' is primary expression ":-y" # next token '-' is prefix operator This is mostly the same resolution as the infix/suffix rules.

parser: separate actions for primary expression and prefix operator This will allow us to define both a primary expression, ":", and a prefix operator, ":y". The ambiguity will be resolved by the next patch. Prefix actions in elements table are adjusted as follows: original prefix primary prefix ----------------- -------- ----------------- ("group", 1, ")") -> n/a ("group", 1, ")") ("negate", 19) -> n/a ("negate", 19) ("symbol",) -> "symbol" n/a

changelog: update read pending documentation The pending index contains a full copy of the index + in-transaction data. We replace "extend" with "overwrite" to make this clearer.

extdiff: add support for subrepos Git and svn subrepo support is incomplete, because they don't support archiving the working copy.

extdiff: use archiver to take snapshots of committed revisions This is the last step before supporting extdiff -S. It maintains the existing behavior of diffing the largefile standins instead of the largefiles themselves. Note however that the standins are not updated immediately upon modification, so uncommitted largefile changes are ignored, as they previously were, even with the diff command.

largefiles: allow the archiving of largefiles to be disabled There are currently no users of this, but it is a necessary step before converting extdiff to use archive. It may be useful to add an argument to extdiff in the future and allow largefiles to be diffed, but archiving largefiles can have significant overhead and may not be very diffable, so archiving them by default seems wrong. It is a mystery to me why the lfstatus attribute needs to be set on the unfiltered repo. However if it is set on the filtered repo instead (and the filtered repo is passed to the original command), the lfstatus attribute is False in the overrides for archival.archive() and hgsubrepo.archive() when invoking the archive command. This smells like the buggy status behavior (see 67d63ec85eb7, which was reverted in df463ca0adef). Neither the status nor summary commands have this weird behavior in their respective overrides.

parsers: fix buffer overflow by invalid parent revision read from revlog If revlog file is corrupted, it can have parent pointing to invalid revision. So we should validate it before updating nothead[], phases[], seen[], etc. Otherwise it would cause segfault at best. We could use "rev" instead of "maxrev" as upper bound, but I think the explicit "maxrev" can clarify that we just want to avoid possible buffer overflow vulnerability.

histedit: mark temporary commits as obsolete when allowed to Before this patch, we were stripping temporary commits at the end of a histedit whether it was successful or not. If we can create obs markers, we should create them instead of stripping because it is faster and safer.

histedit: minor refactoring of createmarkers check We use a variable to store whether or not we can create obsolescence markers. It makes the patch series more readable as we are going to reuse this values in other places in the function.

crecord: fix issue when backgrounding editor would leave artefact Before this patch: - if a user was entering a commit message after having ran the curses interface - and then uses ctrl-z, followed by fg to put the editor in the background/foreground - then the curses interface would leave artefact on the screen of the editor, making entering the commit message a difficult task This happened because ncurses registers a signal handler for SIGTSTP and does not restore the original signal handler after running. More info at: http://stackoverflow.com/questions/31440392/ curses-wrapper-messing-up-terminal-after-background-foreground-sequence/ 31441709#31441709 This patch restores the original value of the signal handler after running the curses interface and therefore fixes this issue. It don't know how to add a test for this issue, I tested the scenario above manually and it works correctly with the patch.

censor: make various path forms available like other Mercurial commands Before this patch, censored file should be exactly "a path relative to repository root" regardless of current working directory, because "hg censor" passes "path" to "repo.file()" directly without any preparations. To make various path forms available like other Mercurial commands, this patch gets a target file path in the way of "hg parents FILE". Getting "wctx" is relocated to reuse "wctx" for efficiency.