update: display the obsfate of hidden revision we update to Display the same message we added recently to the filtered error message when updating to a hidden obsolete changeset. Differential Revision: https://phab.mercurial-scm.org/D1869

evolution: make reporting of new unstable changesets optional This makes it possible to turn off the reporting of unstable changesets (e.g. "1 new orphan changesets"), just in case it's too slow for some users. Anyone who's been using the evolve extension has already been accepting the cost of the reporting, so this is just for the few users who have turned on obsmarkers but not been using the evolve extension (as I believe Facebook has). Differential Revision: https://phab.mercurial-scm.org/D1868

evolution: report new unstable changesets This adds a transaction summary callback that reports the number of new orphan, content-divergent and phase-divergent changesets. The code for reporting it is based on the code from the evolve extension, but simplified a bit. It simply counts the numbers for each kind of instability before and after the transaction. That's obviously not very efficient, but it's easy to reason about, so I'm doing this as a first step that can make us quite confident about the test case changes. We can optimize it later and make sure that the tests are not affected. The code has been used in the evolve extension for a long time and has apparently been sufficiently fast, so it doesn't seem like a pressing issue. Unlike the evolve extension's version of this report, this version applies to all commands (or all transactions run as part of any command, to be exact). Differential Revision: https://phab.mercurial-scm.org/D1867

transaction: register summary callbacks only at start of transaction (BC) We currently register summary callbacks every time localrepo.transaction() is called, so both when the transaction is started and when a nested transaction is created. That seems a little weirdly asymmetric, because the summary callbacks are thus not necessarily registred at the beginning of the outermost transaction, but they are only called when the outermost transaction closes (not when a nested transaction closes). I want to add another summary callback that records the repo state at the beginning of the transaction and compares to that when the transaction closes. However, because of the registration that happens when a nested transaction is created, that would need to go through extra trouble to not overwrite the callback and report the difference from the start time of the innermost transaction to the close of the outermost transaction. Also, the callbacks are registered with a name based on the order they are defined in the registersummarycallback(). For example, if both the "new changesets %s" and the "obsoleted %i changesets" hooks are registered, the first would be called 00-txnreport and the second would be called 01-txnreport. That gets really weird if registersummarycallback() gets called multiple times, because the last one wins, and a depending on which of the two callbacks get registered, we might hypothetically even overwrite on type of callback with another. For example, if when the outer transaction was started, we registered the "new changesets %s" callback first, and when the inner transaction was started, we registered only the "obsoleted %i changesets" callback, then only the latter message would get printed. What makes it hypothetical is that what gets registered depends on the transaction name, and the set of transaction names that we match on for the former latter message is a subset of the set of names we match on for the former. Still, that seems like a bug waiting to happen. That second issue could be solved independently, but the first issue seems enough for me to consider it a bug (affecting developers, not users), so this patch simply drops that extra registration. Note that this affects "hg transplant" in a user-visible way. When "hg transplant" is asked to transplant from a remote repo so it involves a pull, then the outermost transaction name is "transplant" and an inner transaction is created for "pull". That inner transaction is what led us to sometimes report "new changesets %s" from "hg transplant". After this patch, that no longer happens. That seems fine to me. We can make it instead print the message for all "hg transplant" invocations if we want (not just those involving a remote), but I'll leave that for someone else to do if they think it's important. Differential Revision: https://phab.mercurial-scm.org/D1866

repair: filter out unknown revisions from phasecache within transaction I'm about to add another summary report callback that needs to access phase information. These callbacks run at the end of the transaction and some of them failed because they tried to get the phase for stripped commits. The solution is to filter out unknown revisions before the transaction is closed. Differential Revision: https://phab.mercurial-scm.org/D1865

repair: drop unnecessary phase cache invalidation After stripping the revlogs, we have been invalidating the phase cache since bf7b8157c483. Later, in 8e3021fd1a44, I added a call to phasecache.filterunknown(). I apparently didn't realize it then, but I now think that that call made the existing phasecache.invalidate() call unnecessary, so this patch drops it. Both the test added in bf7b8157c483 and the entire evolve extension test suite indeed still pass. Differential Revision: https://phab.mercurial-scm.org/D1864

wireproto: drop support for reader interface from streamres (API) 2add671bf55b and later commits overhauled support for compression and output handling in the wire protocol. Fast forward 14 months and all wire protocol commands except the legacy "changegroup" and "changegroupsubset" commands feed a generator to streamres. I no longer think it is worth maintaining support for the old "reader" API (which allows you to specify an object having a read() method to obtain data). This commit refactors the legacy wire protocol commands to feed a generator to the streamres. We also drop support for the "reader" argument and the code that was using it. As part of the change, chunks over the SSH protocol have increased in size for these commands. But these commands are really ancient, so I doubt anyone will notice. .. api:: wireproto.streamres.__init__ no longer accepts a "reader" argument. Use the "gen" argument instead. Differential Revision: https://phab.mercurial-scm.org/D1861

merge: add `--abort` flag which can abort the merge Currently we don't have a good functionality to abort the merge and tell user to do `hg update -C .` which can leads to different results if user missed the '.' and moreover does not align with other abort functionalities like rebase, shelve etc. This patch adds `hg merge --abort` which will abort the ongoing merge and take us back to the chagneset where we started from. Works in both cases when merge resulted in conflicts and when there were no conflicts. .. feature:: A `--abort` flag to merge command to abort the ongoing merge. Differential Revision: https://phab.mercurial-scm.org/D1829

filemerge: only write in-memory backup during premerge This wasn't broken, but should mirror the non-in memory case to save an extra write. Differential Revision: https://phab.mercurial-scm.org/D1807

filemerge: fix backing up an in-memory file to a custom location If the user specifies a ui.origbackuppath, we used to always copy the file there, but if the source file is in memory we must write it instead of copying. Differential Revision: https://phab.mercurial-scm.org/D1806

rebase: don't run IMM if running rebase in a transaction Some callers to rebase.rebase(), like `_moverelative` in `fbamend/movement.py`, wrap the entire rebase call in a transaction. This raises havoc when IMM tries to retry the rebase when it hits merge conflicts, because the abort will fail the whole transaction, not the subset. It also fails at the end, losing any conflict resolution, as @sid0 noticed. The right long-term fix that @quark and I have discussed is to change the restarting logic such that it doesn't abort at all, but simply switches between IMM and non-IMM fluidly for each commit, which has other nice properties. In the meantime this will do for now. Differential Revision: https://phab.mercurial-scm.org/D1782

python3: whitelist two more passing tests Differential Revision: https://phab.mercurial-scm.org/D1879

sshpeer: add support for request tracing The new 'devel.debug.peer-request' option now also display some information about request going through ssh peer.

httppeer: add support for tracing all http request made by the peer This changeset introduces a new 'devel.debug.peer-request' config. When set to True, debug message about request made by peer will be issued. This help to understand what actually happens during an exchange and tracks source of performance loss. This changeset implement support for http peer only.

httppeer: move url opening in its own method This will help adding debugging logic to request opening when investigating Mercurial performance.

http: add a debug version of the push test This will be useful to test further debugging capabilities in coming changesets.

lfs: raise an error if the server sends an unsolicited oid This shouldn't happen. But we shouldn't ignore it if it does, because something else is likely to go wrong.

lfs: correct documentation typo

test-convert-svn-move: sort svn checkout output It turns out that there's no guarantee in which order svn will traverse a directory while performing a checkout. Sorting the output will make these tests stable.

fileset: do not crash by unary negate operation Backported from minifileset.py.

fileset: make it robust for bad function calls Before, it could crash or show cryptic message.

log: build follow-log filematcher at once We no longer need to replay copy tracing to build filematcher as we can walk (rev, fctxs) pairs.

log: allow matchfn to be non-null even if both --patch/--stat are off This makes the next patch slightly simpler.

log: replace "not pats" with matcher attribute for consistency We use match.always() in _makelogrevset(). match.always() is identical to "not pats" here since scmutil.matchandpats() empties pats in that case.

log: follow file history across copies even with -rREV (BC) (issue4959) Still it falls back to changelog path if glob patterns or missing paths are specified. This will be changed later. .. bc:: ``log --follow -rREV FILE..`` now follows file history across copies and renames.

log: resolve --follow thoroughly in getlogrevs() This makes sense because --follow isn't really an option to filter revisions, but an option to extend revisions to be filtered. _fileancestors() is a minimal copy of revset._follow(). They are slightly different in that which revision the matcher sees. _fileancestors() also uses ctx.walk() instead of ctx.manifest().walk() to show a better warning on bad match, which will be tested later.

log: extract function that processes log file patterns We'll need a matcher to compute revs followed from the given patterns.

log: resolve --follow with -rREV in cmdutil.getlogrevs() This also fixes alias expansion. Before, reverse() could be overridden by user alias. This isn't processed at _logrevs() as we'll need starting revisions to parse file patterns. See the subsequent patches for details.

log: remove dead code to follow descendants if ascending revisions specified It's been disabled since 8b4b9ee6001a "log: make -fr show complete history from the given revs" 2015-02-06, and we've got no bug report regarding this exact behavior. For details what the heck "followdescendants" is, please see the issue comment: https://bz.mercurial-scm.org/show_bug.cgi?id=4959#c72 "'rev(%d)' % startrev" can be replaced with '.' since revs are 'reversed(:.)'.

log: duplicate _logrevs() dedicated for walkchangerevs() Prepares for refactoring getlogrevs() to fix the "log -frREV PATH" issue. I initially thought I could get rid of walkchangerevs(), but it turned out requiring non-trivial work because of a "prepare" callback and a scanning window. This patch makes sure that walkchangerevs() will be unaffected by subsequent changes.

update: fix crash on bare update when directaccess is enabled 'rev' may be None. An empty 'rev' string shouldn't also be passed to unhidehashlikerevs().

templater: make sure expression is terminated by '}' This can't be ensured by the tokenize() generator since the parser stop consuming tokens once it reached an end of an operation. Spotted by Matt Harbison.

bookmark: deprecate direct update of a bookmark value This changeset was part of an older series preventing direct update of the bookmarks store without the change being tracked by a transaction. For some unclear reason, this was not sent to the list. So we are sending it now. Initial series: 3325c7dcabaa+08bf0ebc6c8e+712a85b3677f. We want to channel all bookmarks update through 'applychanges' so let's remove more way to work around this function.

debugdeltachain: display how many chunks would be read in sparse-read mode

bdiff: handle the possibility of an integer overflow when allocating Differential Revision: https://phab.mercurial-scm.org/D1877

svnsubrepo: check if subrepo is missing when checking dirty state (issue5657) During an hg convert command, subrepos are not checked out. However, a manifestmerge may occur during an hg convert if there is a merge commit, which in particular will check the dirty state of subrepos. Before this change, the lack of a checked out subrepo would error out. This check for svn subrepos is modelled after 2fdea636f254 for git subrepos.

win32text: use 'tiprev' when appropriate This is cleaner than the current 'len(repo) - 1' form.

patchbomb: use 'tiprev' when appropriate This is cleaner than the current 'len(repo) - 1' form.

revset: use 'tiprev' when appropriate This is cleaner than the current 'len(repo) - 1' forms

changelog: use 'tiprev()' in 'tip()' Since 'tip()' is just a node version of 'tiprev()' we should reuse the code.

changelog: introduce a 'tiprev' method Accessing tiprev is a common need through the code base. It is usually done using "len(changelog) -1". That form is tedious and error-prone. For example, it will give wrong results on filtered changelog (if the unfiltered tip is filtered). As a result, we introduce a simple 'tiprev()' method to provide this exact information in a nice way.

contrib: add some basic scaffolding for some fuzz test targets I'd like to get the majority of our C code covered by automated fuzz testing. I've started with bdiff because it was already decoupled from libpython and therefore was fairly quick to produce a working fuzzer. The code here is a little odd because I've been having trouble convincing libfuzzer to define a main and I threw in the towel. This code will also work with github.com/google/oss-fuzz, and once it lands in our main repo I intend to enable automated fuzzing in oss-fuzz with reports going to our security alias. Differential Revision: https://phab.mercurial-scm.org/D1875

formatting: enforce clang-format on all .cc files as well as .c files As part of my upcoming fuzzer patch we're going to grow some .cc files. They're not part of the release build (they're only used for fuzzing, which requires clang 6 which in turn implies a working C++ compiler), so I'm not terribly worried about growing some C++ files. Differential Revision: https://phab.mercurial-scm.org/D1874

hghave: add test for clang 6 and later clang 6 includes integrated libfuzzer support, which makes fuzzer stuff a little easier to work with. Differential Revision: https://phab.mercurial-scm.org/D1873

py3: cast error message to localstr in blackbox.py According to the exceptions reporting mechanism, this is the #1 crasher in the test harness for Python 3. Since this exception is in an except block, we'll likely get a new #1 crasher after this change. But at least we won't die during error handling! Differential Revision: https://phab.mercurial-scm.org/D1478

lfs: remove internal url in test `test-lfs-test-server.t` refers to a FB internal domain and requires certain implementation (ex. set error code to 404) at that endpoint. Without any workaround, It should in theory error out like "Domain cannot be resolved". I don't know how Matt Harbison ran the test. This patch changes the test to only depend on `lfs-test-server`. Unfortunately the logic has to be changed since `lfs-test-server` does not set error code to 404 but just removes "download" from "actions". Differential Revision: https://phab.mercurial-scm.org/D1849

lfs: control tracked file selection via a tracked file Since the lfs tracking policy can dramatically affect the repository, it makes more sense to have the policy file checked in, than to rely on all developers configuring their .hgrc properly. The inspiration for this is the .hgeol file. The configuration lives under '[track]', so that other things can be added in the future. Eventually, the config option should be limited to `convert` only. If the file can't be parsed for any reason (including unrecognized elements of the minifileset language), the commit will abort until the problem is corrected. This seems more useful than the warning that hgeol emits, and has no effect on reading the data, so there's no compatibility concerns. My initial thought was to read the file and change each "key = value" line into "((key) & (value))", so that each line could be ORed together, and make a single pass at compiling. Unfortunately, that prevents exclusions if there's a catchall rule. Consider what happens to a large *.c file here: [track] **.c = none() ** = size('>1MB') # ((**.c) & (none())) | ((**) & (size('>1MB'))) => anything > 1MB I also thought about having separate [include] and [exclude] sections. But that just seems to open things up to user mistakes. Consider: [include] **.zip = all() **.php = size('>10MB') [exclude] **.zip = all() # Who wins? **.php = none() # Effectively 'all()' (i.e. nothing excluded), or >10MB ? Therefore, it just compiles each key and value separately, and walks until the key matches something. I'm not sure how to enforce just file patterns on LHS without leaking knowledge about the minifileset here. That means this will allow odd looking lines like this: [track] **.c | **.txt = none() But that's also fewer lines to compile, so slightly more efficient? Some things like 'none()' won't work as expected on LHS though, because that won't match, so that line is skipped. For now, these quirks are not mentioned in the documentation. Jun previously expressed concern about efficiency when scaling to large repos, so I tried avoiding 'repo[None]'. (localrepo.commit() gets repo[None] already, but doesn't tie it to the workingcommitctx used here.) Therefore, I looked at the passed context for 'AMR' status. But that doesn't help with the normal case where the policy file is tracked, but clean. That requires looking up p1() to read the file. I don't see any way to get the content of one file without first creating the full parent context.

lfs: move the tracked file function creation to a method Once a commitable file format for tracked config is agreed upon, I can't see any reason to have a config based way to control this. (Other than convert. That will be necessary to override the file when converting to normal files. Also, converting to lfs needs this if not splicing the file in at the beginning. So maybe the existing config option should be `convert` specific.) Looking to hgeol for precedent, it looks like policy that affects how items are stored are handled only by the tracked file, while policy that affects the checkout can be handled by either a user config or the tracked file (but the latter takes precedence). We probably need a transition period, so this transition policy can be controlled by the function. Additionally, it provides a place for convert to wrap to override the file based config.

lfs: allow the pointer file to be viewed with `hg cat -T '{rawdata}'` The only other interface to this data is `hg debugdata`, which requires knowledge of the filelog revision that corresponds to the changeset. Since the data is uninterpreted, this is an important debugging capability, and needs to be simpler to use than that. For non-LFS files, this displays the regular data. Alternately, we could forego the messy function extraction in the last patch if this template keyword can just be added unconditionally.

cat: factor out a function that populates the formatter This will allow extensions to add data to the templater.

svnsubrepo: add new method _svnmissing This is modelled after _gitmissing from dea6efdd7ec4 and also necessary for svn. I'm not sure exactly how this hasn't been more of a problem for svn until now, actually.

svnsubrepo: decorate dirty method with annotatesubrepoerror This function invokes svn commands which can error out in any number of ways, so it's helpful to know in which subrepo this error happens.

match: do not weirdly include explicit files excluded by -X option Actually, this was the original behavior. Before a83a7d27911e, "log" and "files" showed nothing if "FILE -X FILE" was specified, whereas "debugwalk" got confused by an explicit FILE pattern. Under the hood, "log" and "files" use m() and ctx.matches(m) respectively, and "debugwalk" uses ctx.walk(m). I suspect dirstate.walk() goes wrong in _walkexplicit(), which seems to blindly trust m.files(). I reckon the original "log"/"files" behavior is correct, and drop the hack from the differencematcher.

lfs: add the '{oid}' template keyword to '{lfs_files}' The 'sha256:' prefix is skipped because this seems like the most convenient way to consume it. Maybe we should also add a '{oid_type}' keyword? Then again, that can be added in the future if a different algorithm is supported.

lfs: convert '{lfs_files}' keyword to a hybrid list This will allow more attributes about the file to be queried.

showstack: add an extension docstring Now, running `hg help showstack` will give details on how to use the extension.

bookmark: run 'pushkey' hooks after bookmark move, not 'prepushkey' This was a silly copy paste mistake. Spotted by Mitchell Plamann from Jane Street.

hgweb: remove unused second argument of nextPageVarGet() nextPageVarGet is a function that's used in ajaxScrollInit() to produce URL of the next page. Before f84b01257e06, its second argument previousVal was a number on /graph pages, and the code was simply adding 60 to it and returning the resulting value. Now previousVal can only be a string containing changeset hash, which can't be used the same way (and in fact isn't used in any way).

dispatch: handle IOError when writing to stderr Previously, attempts to write to stderr in dispatch.run() may lead to an exception being thrown. This would likely be handled by Python's default exception handler, which would print the exception and exit 1. Code in this function is already catching IOError for stdout failures and converting to exit code 255 (-1 & 255 == 255). Why we weren't doing the same for stderr for the sake of consistency, I don't know. I do know that chg and hg diverged in behavior here (as the changed test-basic.t shows). After this commit, we catch I/O failure on stderr and change the exit code to 255. chg and hg now behave consistently. As a bonus, Rust hg also now passes this test. I'm skeptical at changing the exit code due to failures this late in the process. I think we should consider preserving the current exit code - assuming it is non-0. And, we may want to preserve the exit code completely if the I/O error is EPIPE (and potentially other special error classes). There's definitely room to tweak behavior. But for now, let's at least prevent the uncaught exception. Differential Revision: https://phab.mercurial-scm.org/D1860

commandserver: restore cwd in case of exception The order of the statements was also changed a bit. But it shouldn't matter. Differential Revision: https://phab.mercurial-scm.org/D1859

tests: make hg frame optional When `hg` is a Rust binary, the `hg` frame doesn't exist because an `hg` Python script doesn't exist. This commit updates expected test output to make the `hg` frame optional. There /might/ be a way to do this more accurately with the "(feature !)" syntax in .t files. However, I poked at it for a few minutes and couldn't get it to work. Worst case with using (?) is we drop the frame from output for Python `hg`. The `hg` frame isn't terribly important. So the worst case doesn't feel that bad. If someone wants to enlighten me on how to use "(feature !)" for optional output based on hghave features, I'd be more than willing to update this. Differential Revision: https://phab.mercurial-scm.org/D1858

test-lfs: add tests to show that hashes remain unchanged by conversions This is a very cool feature that we should document, but I'll punt that to the freeze. From what I can tell, git doesn't have this capability.

test-lfs: drop an unresolved issue note, now that lfs.track=none() is a thing

lfs: always exclude '.hg*' text files I can't think of any problematic scenarios (though things might get interesting with .hgtags, since every head is consulted). The eol extension explicitly disables handling these files, and that seems reasonable here too.

bookmarks: calculate visibility exceptions only once In the loop "for mark in names", the rev is same in each iteration, so it does not makes sense to call unhidehashlikerevs multiple times. Thanks to Yuya for spotting this.

log: rewrite --follow-first -rREV like --follow for consistency (BC) This helps fixing the "--follow -rREV PATH" issue. .. bc:: ``log --follow-first -rREV``, which is deprecated, now follows the first parent of merge revisions from the specified ``REV`` just like ``log --follow -rREV``.

log: use revsetlang.formatspec() thoroughly This patch replaces %(val)s and %(val)r with %r (expression) and %s (string) respectively. _matchfiles() is the exception as it takes a list of string parameters. "--prune REV" could take a revset expression if it were "ancestors(%(val)s)", but this patch doesn't change the existing behavior.

log: use revsetlang.formatspec() to concatenate list expression This rewrites 'not ancestors(x) and not ...' as 'not (ancestors(x) or ...)' so we can use '%lr'. 'isinstance(val, list)' is replaced with 'listop' to make sure 'listop' is applied.

log: simplify 'x or ancestors(x)' expression 'ancestors(x)' includes 'x'.

log: make opt2revset table a module constant Just makes it clear that the table isn't updated in _makelogrevset().

revlog: group revision info into a dedicated structure

revlog: rename 'rev' to 'base', as it is the base revision

revlog: separate diff computation from the collection of other info

revlog: introduce 'deltainfo' to distinguish from 'delta' A 'delta' is a binary diff between two revisions, as returned by revdiff. A 'deltainfo' is an object storing information about a delta, including the 'delta' itself. Formerly, it was stored in a 7-position tuple, which was less readable.

revlog: extract 'builddelta' closure function from _addrevision

revlog: extract 'buildtext' closure function from _addrevision

revlog: choose between ifh and dfh once for all

revlog: refactor out the selection of candidate revisions The new function will be useful to retrieve all the revisions which will be needed to determine the best delta, and parallelize the computation of the necessary diffs.

py3: use email.parser module to parse email messages Before this patch we use email.Parser.Parser() from the email module which is not available on Python 3. On Python 2: >>> import email >>> import email.parser as emailparser >>> email.Parser.Parser is emailparser.Parser True

rust: convert Unix path to CString transparently On Unix, path is just a sequence of bytes. We shouldn't convert it to UTF-8 string.

rust: extract function to convert Path to platform CString It can be better on Unix.

pylint: add a check for multiple statement on a single line Now that they are all cleaned up, we can install a check so that no new occurrence appears. Differential Revision: https://phab.mercurial-scm.org/D1834

style: remove multiple statement on a single line in zeroconf Differential Revision: https://phab.mercurial-scm.org/D1833

style: remove multiple statement on a single line This is similar to the change made in 5326e4ef1dab. Differential Revision: https://phab.mercurial-scm.org/D1832

pylint: split command line argument on multiple lines This clarify the important line in that configuration. Differential Revision: https://phab.mercurial-scm.org/D1831

phabricator: use named group for parsing differential reviews lines Differential Revision: https://phab.mercurial-scm.org/D1801

vfs: drop text mode flag (API) It's useless on Python 3. .. api:: ``text=False|True`` option is dropped from the vfs interface because of Python 3 compatibility issue. Use ``util.tonativeeol/fromnativeeol()`` to convert EOL manually.

lfs: convert EOL of hgrc before appending to bytes IO Text IO is useless on Python 3 as it must be a unicode stream.

largefiles: convert EOL of hgrc before appending to bytes IO Text IO is useless on Python 3 as it must be a unicode stream.

share: convert EOL of hgrc before writing to bytes IO Text IO is useless on Python 3 as it must be a unicode stream.

subrepo: convert EOL of hgrc before writing to bytes IO Follows up f2f0a777b2e2. Text IO is useless on Python 3 as it must be a unicode stream.

clone: use utility function to write hgrc

share: use context manager or utility function to write file

lfs: migrate most file filtering from threshold to custom filter Migrate `lfs.threshold` to more powerful `lfs.filter` added by D4990618 so people can specify what files to be stored in LFS with more flexibility. This patch was authored by Jun Wu for the fb-experimental repo, to avoid using matcher for efficiency[1]. All I've changed here is to register the new 'lfs.track' default so that the tests run cleanly, and adapt the subsequent language changes. Migrating the remaining uses of 'lfs.threshold' can be done separately since there's a fallback in place. [1] https://www.mercurial-scm.org/pipermail/mercurial-devel/2017-December/109388.html

test-lfs: bump the number on test repo11 and higher This will allow a Facebook patch that creates 'repo11' to be imported without breaking a bunch of tests, or requiring edits on the fly.

fileset: add a lightweight file filtering language This patch was inspired by one that Jun Wu authored for the fb-experimental repo, to avoid using matcher for efficiency[1]. We want a way to specify what files will be converted to LFS at commit time. And per discussion, we also want to specify what files to skip, text diff, or merge in another config option. The current `lfs.threshold` config option could not satisfy complex needs. I'm putting it in a core package because Augie floated the idea of also using it for narrow and sparse. Yuya suggested farming out to fileset.parse(), which added support for more symbols. The only fileset element not supported here is 'negate'. (List isn't supported by filesets either.) I also changed the 'always' token to the 'all()' predicate for consistency, and introduced 'none()' to improve readability in a future tracked file based config. The extension operator was changed from '.' to '**', to match how recursive path globs are specified. Finally, I changed the path matcher from '/' to 'path:' at Yuya's suggestion, for consistency with matcher. Unfortunately, ':' is currently reserved in filesets, so this has to be quoted to be processed as a string instead of a symbol[2]. We should probably revisit that, because it's seriously ugly. But it's only used by an experimental extension, and I think using a file based config for LFS may drive some more tweaks, so I'm settling for this for now. I reserved all of the glob characters in fileset except '.' and '_' for the extension test because those are likely valid extension characters. Sample filter settings: all() # everything size(">20MB") # larger than 20MB !**.txt # except for .txt files **.zip | **.tar.gz | **.7z # some types of compressed files "path:bin" # files under "bin" in the project root [1] https://www.mercurial-scm.org/pipermail/mercurial-devel/2017-December/109387.html [2] https://www.mercurial-scm.org/pipermail/mercurial-devel/2018-January/109729.html

fileset: split the logic for matching a size expression to a separate method This will be used in the next patch to build a simple filtering language, but where we won't have an mctx.

lfs: drop deprecated remote store config options The last of these were removed from fb-experimental in 86884a51e9aa, and we might as well clean this up before the freeze.

py3: use bytes instead of pycompat.bytestr Follow up for 35fb3367f72d. Differential Revision: https://phab.mercurial-scm.org/D1854

test-pull-r: explicitly kill server processes Differential Revision: https://phab.mercurial-scm.org/D1855

bookmarks: add bookmarks to hidden revs if directaccess config is set This patch adds support to add bookmarks to hidden revs if `experimental.directaccessi=True` config is set. A warning is also printed saying "accessing hidden changeset <revhash>". Differential Revision: https://phab.mercurial-scm.org/D1813

visibility: pass a normal repo to _getfilteredreason There is no reason to pass an unfiltered-repo to _getfilteredreason and successorssets, so use a normal repo instead. Differential Revision: https://phab.mercurial-scm.org/D1853

visibility: make the filtered message translatable Introduce a filtered message table to ease translation of these messages. Differential Revision: https://phab.mercurial-scm.org/D1852

visibility: fix a comment introduced before which is not up-to-date 265cd9e19d26 introduced a comment in _filterederror that was not updated with the latest iterations of the patch, fix the comment. Differential Revision: https://phab.mercurial-scm.org/D1851

rust: avoid redundant 'static lifetime 'static is apparently automatic for const variables. Differential Revision: https://phab.mercurial-scm.org/D1846

pull: hold wlock for the full operation when --update is used With now, the wlock is not held between the pull and the update. This can lead to race condition and make logic checking to post pull results more complicated (eg: with _afterlock).

hgweb: drop support of browsers that don't understand <canvas> (BC) Internet Explorer 8 and below need excanvas aka ExplorerCanvas to support canvas tag at all. We used to vendor the library in Mercurial, but IE8 was discontinued and all support for it ceased in January 2016. We should do the same and remove excanvas library. Apart from just cleaning up code, this will also make downstream Debian packages stop depending on libjs-excanvas, for example.

rust: add TODO about lifetime of program_name variable Per review comment in D1581. Differential Revision: https://phab.mercurial-scm.org/D1847

rust: move import of PathBuf By moving it to the single function that uses it, we eliminate a #cfg. Differential Revision: https://phab.mercurial-scm.org/D1845

perf: do not import util.queue This was added by af25237be091. But util.queue is not a module and is not importable. I guess it wasn't noticed because of demandimport. Differential Revision: https://phab.mercurial-scm.org/D1848

rust: move Cargo.lock If you do a `cargo build` in rust/, Cargo will create rust/Cargo.lock. Furthermore, the previous rust/hgcli/Cargo.lock appears to not even be consulted because the auto-generated rust/Cargo.lock varied from rust/hgcli/Cargo.lock. This commit moves Cargo.lock to where Cargo expects it to be. While we're here, bump the version of libc to the latest available. Differential Revision: https://phab.mercurial-scm.org/D1844

run-tests: fix regular expression for path test The previous regexp would match the empty string. This fixes a mistake added in 964212780daf. Differential Revision: https://phab.mercurial-scm.org/D1843