wireprotov2: always advertise raw repo requirements I'm pretty sure my original thinking behind making it conditional on stream clone support was that the behavior mirrored wire protocol version 1. I don't see a compelling reason for us to not advertise the server's storage requirements. The proper way to advertise stream clone support in wireprotov2 would be to not advertise the command(s) required to perform stream clone or to advertise a separate capability denoting stream clone support. Stream clone isn't yet implemented on wireprotov2, so we can cross this bridge later. Differential Revision: https://phab.mercurial-scm.org/D4863

tests: don't be as verbose in wireprotov2 tests I don't think that printing low-level I/O and frames is beneficial to testing command-level functionality. Protocol-level testing, yes. But command-level functionality shouldn't care about low-level details in most cases. This output makes tests more verbose and harder to read. It also makes them harder to maintain, as you need to glob over various dynamic width fields. Let's remove these low-level details from many of the wireprotov2 tests. Differential Revision: https://phab.mercurial-scm.org/D4861

repository: define and use revision flag constants Revlogs have a per-revision 2 byte field holding integer flags that define how revision data should be interpreted. For historical reasons, these integer values are sent verbatim on the wire protocol as part of changegroup data. From a semantic standpoint, the flags that go out over the wire are different from the flags stored internally by revlogs. Failure to establish this semantic distinction creates unwanted strong coupling between revlog's internals and the wire protocol. This commit establishes new constants on the repository module that define the revision flags used by the wire protocol (and by some internal storage APIs, sadly). The changegroups internals documentation has been updated to document them explicitly. Various references throughout the repo now use the repository constants instead of the revlog constants. This is done to make it clear that we're operating on generic revision data and this isn't tied to revlogs. Differential Revision: https://phab.mercurial-scm.org/D4860

context: reverse conditional branch order in introrev Positive logic will be simpler to follow. It will help to clarify coming refactoring.

context: drop a redundant fast path in introrev Now that _adjustlinkrev fast path this case itself, we no longer need an extra conditional. A nice side effect is that we are no longer calling `self.rev()`. In case where `_descendantrev` is set, calling `self.rev` will trigger a potentially expensive `_adjustlinkrev` call. So blindly calling `self.rev()` to avoid another `_adjustlinkrev` call can be counterproductive. Note that `_descendantrev` is currently never taken into account in `introrev` so far which is wrong. We'll fix that in changeset later in this series.

context: fast path linkrev adjustement in trivial case If the search starts from the linkrev, there is nothing to adjust.

url: allow to configure timeout on http connection By default, httplib.HTTPConnection opens connection with no timeout. If the server is hanging, Mercurial will wait indefinitely. This may be an issue for automated scripts. Differential Revision: https://phab.mercurial-scm.org/D4878

obsolete: explicitly track folds inside the markers We now record information to be able to recognize "fold" event from obsolescence markers. To do so, we track the following pieces of information: a) a fold ID. Unique to that fold (per successor), b) the number of predecessors, c) the index of the predecessor in that fold. We will now be able to create an algorithm able to find "predecessorssets". We now store this data in the generic "metadata" field of the markers. Updating the format to have a more compact storage for this would be useful. This way of tracking a fold through multiple markers could be applied to split too. This would have two advantages: 1) We get a simpler format, since number of successors is limited to [0-1]. 2) We can better deal with situations where only some of the split successors are pushed to a remote repository. We should look into the relevance of such a change before updating the on-disk format. note: unlike splits, folds do not have to deal with cases where only some of the markers have been synchronized. As they all share the same successor changesets, they are all relevant to the same nodes.

cleanupnodes: update comment to drop mention of filtering Since changeset 1857f50a9643 drop the filtering, we should not longer mention it in code comment.

treemanifests: remove _loadalllazy when doing copies 'before' here is https://phab.mercurial-scm.org/D4845 (not the committed/rebased version) diff --git: repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before ------+---+---+------------------------+-----------------------+------------ m-u | | | 1.329 s +- 0.011 s | 1.320 s +- 0.010 s | 99.3% m-u | | x | 1.316 s +- 0.005 s | 1.334 s +- 0.018 s | 101.4% m-u | x | | 1.330 s +- 0.021 s | 1.322 s +- 0.005 s | 99.4% m-u | x | x | 87.2 ms +- 0.7 ms | 86.9 ms +- 1.5 ms | 99.7% l-d-r | | | 203.3 ms +- 7.8 ms | 199.4 ms +- 1.8 ms | 98.1% l-d-r | | x | 204.6 ms +- 2.8 ms | 201.7 ms +- 2.1 ms | 98.6% l-d-r | x | | 90.5 ms +- 11.0 ms | 86.2 ms +- 1.0 ms | 95.2% l-d-r | x | x | 66.3 ms +- 2.0 ms | 66.4 ms +- 0.9 ms | 100.2% diff -c . --git: repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before ------+---+---+------------------------+-----------------------+------------ m-u | | | 239.4 ms +- 2.0 ms | 241.7 ms +- 4.6 ms | 101.0% m-u | | x | 128.9 ms +- 1.9 ms | 130.9 ms +- 7.7 ms | 101.6% m-u | x | | 241.1 ms +- 1.6 ms | 240.1 ms +- 1.4 ms | 99.6% m-u | x | x | 133.4 ms +- 1.5 ms | 133.4 ms +- 1.2 ms | 100.0% l-d-r | | | 84.3 ms +- 1.5 ms | 83.5 ms +- 1.0 ms | 99.1% l-d-r | | x | 200.9 ms +- 6.3 ms | 203.0 ms +- 4.4 ms | 101.0% l-d-r | x | | 108.1 ms +- 1.4 ms | 108.7 ms +- 2.1 ms | 100.6% l-d-r | x | x | 190.2 ms +- 4.8 ms | 191.6 ms +- 2.0 ms | 100.7% rebase -r . --keep -d .^^: repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before ------+---+---+------------------------+-----------------------+------------ m-u | | | 5.655 s +- 0.029 s | 5.640 s +- 0.036 s | 99.7% m-u | | x | 5.813 s +- 0.038 s | 5.773 s +- 0.028 s | 99.3% m-u | x | | 5.593 s +- 0.043 s | 5.589 s +- 0.028 s | 99.9% m-u | x | x | 648.2 ms +- 19.2 ms | 637.3 ms +- 27.7 ms | 98.3% l-d-r | | | 673.3 ms +- 8.0 ms | 673.2 ms +- 6.8 ms | 100.0% l-d-r | | x | 6.583 s +- 0.030 s | 5.721 s +- 0.028 s | 86.9% <-- l-d-r | x | | 277.8 ms +- 6.7 ms | 276.0 ms +- 2.7 ms | 99.4% l-d-r | x | x | 1.692 s +- 0.013 s | 720.9 ms +- 13.3 ms | 42.6% <-- status --change . --copies: repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before ------+---+---+------------------------+-----------------------+------------ m-u | | | 220.9 ms +- 1.6 ms | 219.9 ms +- 2.2 ms | 99.5% m-u | | x | 109.2 ms +- 1.0 ms | 109.4 ms +- 0.8 ms | 100.2% m-u | x | | 222.6 ms +- 1.7 ms | 221.4 ms +- 2.1 ms | 99.5% m-u | x | x | 113.4 ms +- 0.5 ms | 113.1 ms +- 1.1 ms | 99.7% l-d-r | | | 82.1 ms +- 1.7 ms | 82.1 ms +- 1.2 ms | 100.0% l-d-r | | x | 199.8 ms +- 4.0 ms | 200.7 ms +- 3.6 ms | 100.5% l-d-r | x | | 85.4 ms +- 1.5 ms | 85.2 ms +- 0.3 ms | 99.8% l-d-r | x | x | 202.6 ms +- 4.4 ms | 208.0 ms +- 4.0 ms | 102.7% status --copies: repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before ------+---+---+------------------------+-----------------------+------------ m-u | | | 1.941 s +- 0.014 s | 1.930 s +- 0.009 s | 99.4% m-u | | x | 1.924 s +- 0.007 s | 1.950 s +- 0.010 s | 101.4% m-u | x | | 1.959 s +- 0.085 s | 1.926 s +- 0.009 s | 98.3% m-u | x | x | 96.2 ms +- 1.0 ms | 96.4 ms +- 0.7 ms | 100.2% l-d-r | | | 604.4 ms +- 10.6 ms | 602.6 ms +- 7.1 ms | 99.7% l-d-r | | x | 605.7 ms +- 4.1 ms | 607.4 ms +- 6.1 ms | 100.3% l-d-r | x | | 182.4 ms +- 1.2 ms | 183.4 ms +- 1.2 ms | 100.5% l-d-r | x | x | 150.8 ms +- 2.0 ms | 150.6 ms +- 1.0 ms | 99.9% update $rev^; ~/src/hg/hg{hg}/hg update $rev: repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before ------+---+---+------------------------+-----------------------+------------ m-u | | | 3.185 s +- 0.027 s | 3.181 s +- 0.017 s | 99.9% m-u | | x | 3.028 s +- 0.021 s | 2.954 s +- 0.010 s | 97.6% m-u | x | | 3.168 s +- 0.010 s | 3.175 s +- 0.023 s | 100.2% m-u | x | x | 317.5 ms +- 3.5 ms | 313.2 ms +- 2.9 ms | 98.6% l-d-r | | | 456.2 ms +- 10.6 ms | 454.4 ms +- 5.8 ms | 99.6% l-d-r | | x | 9.236 s +- 0.063 s | 757.9 ms +- 9.2 ms | 8.2% <-- l-d-r | x | | 257.6 ms +- 2.3 ms | 261.2 ms +- 1.7 ms | 101.4% l-d-r | x | x | 1.614 s +- 0.013 s | 478.0 ms +- 14.3 ms | 29.6% <-- Differential Revision: https://phab.mercurial-scm.org/D4875