merge: determine what untracked conflicts cause warns and aborts separately This is written in a somewhat weird style, but it's designed for code reuse in an upcoming patch.

merge: factor out code to get checkunknown config We're going to reuse this code shortly.

hooks: add HG_NODE_LAST to txnclose and changegroup hook environments Sometimes a txnclose or changegroup hook wants to iterate through all the changesets in transaction: in that situation usually the revset `$HG_NODE:` is used to select the revisions. Unfortunately this revset sometimes may contain too many changesets because we don't have the write lock while the hook runs newer changes may be added to repository in the meantime. That's why there is a need for extra variable carrying the information about the last change in the transaction.

exchange: make clone bundles non-experimental and enabled by default The clone bundles feature was introduced in Mercurial 3.6 behind an experimental and disabled by default flag. The feature has been enabled on hg.mozilla.org for a few months and has served many terabytes of clones. Users have been encouraged to use the feature and reception has been very positive (mainly due to faster clones as a result of connecting to a CDN). I have heard no feedback about changing the feature other than inquiries about when it will be enabled by default. So, I think the feature is ready to be enabled by default. This patch renames experimental.clonebundles to ui.clonebundles, documents the option, and enables it by default. References to the experimental state of clone bundles have been removed. The remaining config option docs in clonebundles.py have been removed because they are redudant with `hg help config`. There are some oddities with behavior of clone bundles. Because clones with clone bundles are effectively 2 `hg pull` operations, there may be 2 transactions. This could result in hooks running twice. If the subsequent pull is aborted, it could result in partial rollback and an incomplete clone. This behavior is a bit wonky and should probably be documented. If this patch is accepted, I'll send a follow-up to document it. I don't think this behavior should prevent the feature being enabled by default. Reworking the clone mechanism to support interrupted or multi-part clones feels like a major new feature and something that when implemented can change the hook and rollback semantics of clone bundles. Besides, partial clone is better than full rollback and hooks running on initial clone are likely rare, so I think the impact is minimal.

exchange: make clonebundleprefers non-experimental In preparation for making the feature enabled by default.

clonebundles: remove advertisement of feature I screwed up. When clone bundles is enabled on the server and a compatible client without the feature enabled clones, the server sends down an advertisement saying to enable the feature. The server creates the message which is printed verbatim on the client as an "output" part. There are 2 problems: 1) The message doesn't respect the client's localization 2) The message contains a reference to the "experimental.clonebundles" option. Since clone bundles is about to be marked as non-experimental and the goal of the advertisement was to encourage clients to test the experimental feature, let's just remove the broken advertisement since it no longer serves a purpose.

changegroup: remove now-unused 'wasempty' variable and parameter

treemanifests: set bundle2 part parameter indicating treemanifest By adding a mandatory 'treemanifest' parameter in the bundle2 part, we make it possible for the recipient to set repo requirements before the manifest revlog is accessed.

docchecker: scan for missing space before :hg:

tests: run docchecker in gendoc.t

tests: move gendoc.t runrst comment next to runrst

docchecker: introduce a way to check for poor markup Specifically, :hg:`foo 'bar baz'` when rendered by `hg help` results in: 'hg foo 'bar baz'' ... which is hard to read. We encourage :hg:`foo "bar baz"` instead.

minirst: change hgrole to use single quotes We decided to reserve double quotes for arguments to hg because cmd does not like single quotes, so switch the outer quotes to single

paths: port to generic templater Embedded passwords are masked only in plain output because we'll want raw values in machine-readable format such as JSON. For custom template, we can add a filter to mask passwords (e.g. "{url|hidepassword}"). path.rawloc field is called as "url" than "path" because we have "pushurl" sub-option. Also, "name" and "url" are not allowed as sub-options as they conflict with the field names.

paths: merge conditions that select visibility of fields Truth table (extracted from the original implementation): search quiet name path subopt ------ ----- ---- ---- ------ f f T T T f T T f f T f f T f T T f f f

paths: use single loop for both search=None|pattern cases This will help porting to the formatter API. This patch adds test for empty pathitems to make sure "hg paths" never say "not found!".

paths: reorder else clause for readability of subsequent patches This prepares for porting to the formatter API. Future patches will use a single loop to handle both search=None|pattern cases because formatter output should be the same. "pathitems" will be switched instead.

paths: drop ui.status label from output of "hg paths name" We just need to not print path if --quiet. ui.status label is unwanted.

unionrepo: fix wrong rev being checked in iscensored (issue5024)

summary: print unstable, bumped and divergent as unconditionally plural This aligns with the unconditional plural output for the update line contents, as well as the incoming/outgoing bookmarks line. It also matches the message in evolve's summary hook as of 4f83b2d2d20d. (Though I thought this was removed recently?)

debugshell: disable demand importer when importing debugger For reasons I can't explain (but likely have something to do with a combination of __import__ inferring default values for arguments and the demand importer mechanism further assuming defaults), the demand importer isn't playing well with IPython. Without this patch, we get a failure "ValueError: Attempted relative import in non-package" when attempting to import "IPython." The stack has numerous demandimport calls on it and adding "IPython" to the exclude list in demandimport isn't enough to make the problem go away, which means the issue is likely somewhere in the bowells of IPython. It's easier to just disable the demand importer when importing the debugger.

status: change + back out == clean (API) After backing out a change, so the file contents is equal to a previous revision of itself, we currently report the status between the two equal revisions as modified. This is because context._buildstatus() reports any file whose new nodeid is not equal to _newnode as modified. That magic nodeid is given only to files added or modified in the working directory, so any file whose nodeid has changed between two revisions will be reported as modified. Fix by simply comparing the file contents for all cases where the nodeid changed, whether they are in the working copy or committed. Marking with (API) as it subtly changes the semantics of the method.

convert: use manifest.diff() instead of ctx.status() mercurial_source.getchanges() seems to care about files whose nodeid has changed even if their contents has not (i.e. it has been reverted/backed out). The method uses ctx1.status(ctx2) to find differencing files. However, that method is currently broken and reports reverted changes as modified. In order to fix that method, we first need to rewrite getchanges() using manifest.diff(), which does report reverted files as modified (because it's about differences in the manifest, so about nodeids).

convert: replace cache of (m,a,r) by (ma,r) The next commit will rewrite the way we find changes between two manifests. By making the cache not care about the difference between added and modified files, we don't require the rewritten code to care about that difference either. Also extract the call to ctx.status() to simplify the next commit.

convert: use _ prefix for private methods in hg sink This makes it clearer which methods are part of the interface defined by the superclass.

children: update help with replacement

graphlog: update help with replacement

histedit: clarify modes also fix terse command syntax

histedit: explain basics of histedit commands This should be hooked into @action via an extended help argument, but that is future work.

histedit: report the unacceptable changeset

mdiff: don't emit a diff header for empty trivial deltas An empty trivial delta, coded as (0, 0, 0) makes the delta application do nothing, but still takes 12 bytes, while skipping it altogether works as much, without taking any space at all.

commands: get rid of empty try/finally block from _dograft This diff is purely an indentation change to clean up a block that was kept in place to make 77995317b374 easier to read.

commands: get rid of empty try/finally block from _dobackout This diff is purely an indentation change to clean up a block that was kept in place to make c7217f1458bf easier to read.

commands: get rid of empty try/finally block from import_ This diff is purely an indentation change to clean up a block that was kept in place to make 713b09fc9fbb easier to read.

streamclone: use context manager for writing files These are the file writes that have the most to gain from background I/O. Plug in a context manager so I can design the background I/O mechanism with context managers in mind.

scmutil: use context managers for file handles Now that we dropped support for Python 2.4, we are able to use context managers. Let's replace the try..finally pattern in scmutil.py with context managers, which close files automatically when the context manager is exited. There should be no change in behavior with this patch. Why convert to context managers if nothing is broken? I'm working on closing file handles in background threads to improve performance on Windows. As part of this, I realized there could be some future issues if the background file closing code isn't designed with context managers in mind. So, I'd like to switch some code to context managers so I can design an API that works with context managers.

statichttprepo: implement __enter__ and __exit__ on httprangeheader httprangeheader behaves like a file object. Implement __enter__ and __exit__ so it can be used as a context manager, just like file objects.

osutil: implement __enter__ and __exit__ on posixfile So they can be used as context managers.

util: introduce ctxmanager, to avoid nested try/finally blocks This is similar in spirit to contextlib.nested in Python <= 2.6, but uses an extra level of indirection to avoid its inability to clean up if an __enter__ method raises an exception. Why add this mechanism? It greatly simplifies scoped resource management, and lets us eliminate several hundred lines of try/finally blocks. In many of these cases the "finally" is separated from the "try" by hundreds of lines of code, which makes the connection between resource acquisition and disposal difficult to follow. (The preferred mechanism would be the "multi-with" syntax of 2.7+, but Mercurial can't move to 2.7 for a while.) Intended use: >>> with ctxmanager(lambda: file('foo'), lambda: file('bar')) as c: >>> f1, f2 = c() This will open both foo and bar when c() is invoked, and will close both upon exit from the block. If the attempt to open bar raises an exception, the block will not be entered - but foo will still be closed.

hghave: support HGMODULEPOLICY for pure HGMODULEPOLICY was introduced in 4374d819ccd5

merge with stable

tests: extend check-commit self-tests This now contains both positive and negative tests for almost all the check-commit rules.

encoding: handle UTF-16 internal limit with fromutf8b (issue5031) Default builds of Python have a Unicode type that isn't actually full Unicode but UTF-16, which encodes non-BMP codepoints to a pair of BMP codepoints with surrogate escaping. Since our UTF-8b hack escaping uses a plane that overlaps with the UTF-16 escaping system, this gets extra complicated. In addition, unichr() for codepoints greater than U+FFFF may not work either. This changes the code to reuse getutf8char to walk the byte string, so we only rely on Python for unpacking our U+DCxx characters.

bmstore: add handling of the active bookmark This further centralizes the handling of bookmark storage, and will help get some lingering bookmarks business out of localrepo. Right now, this change implies reading of the active bookmark to also imply reading all bookmarks from disk - for users with many many bookmarks this may be a measurable performance hit. In that case, we should migrate bmstore to be able to lazy-read its properties from disk rather than having to eagerly read them, but I decided to avoid doing that to try and avoid some potentially complicated filecache decorator issues. This doesn't move the logic for writing the active bookmark into a transaction, though that is probably the correct next step. Since the API probably needs to morph a little more, I didn't bother marking bookmarks.{activate,deactivate} as deprecated yet.

patchbomb: treat empty address list as no addresses Previously it wasn't possible to use configuration to avoid being prompted for e.g. a CC list when using patchbomb to send emails. We now make it possible to supply an empty value.

config: add hasconfig method and supporting plumbing We add the hasconfig method to make it possible to distinguish between a config value that was never supplied and one that is empty.

verify: replace "output parameters" by return values _verifychangelog() and _verifymanifest() accept dictionaries that they populate. We pass in empty dictionaries, so it's clearer to create them in the functions and return them.

shelve: hook afterresolvedstates

check-code: allow only-whitespace lines in tests These turn out to be necessary to embed diffs with blank lines in test input. So we now complain about whitespace following a character.

check-commit: try to curb bad commit summary keywords The goal of commit summary keywords is to help us sort, categorize, and filter our voluminous commits for our release notes in a way that's helpful and meaningful to end users. Lately, there have been a huge number of "keywords" that are neither words nor particularly key. This patch tries to discourage that by narrowing the allowed characters to alphanumeric. In particular, it doesn't allow "." (method, function names, and file extensions) and "/" (filenames). It also gives a short reminder of what a keyword ought to be.

changegroup: don't add a second trailing '/' in dir name The paths given from treemanifest.dir() already contains the trailing slash.

changegroup: remove left-over debugging help

run-tests: skip threading for a single test Threading is incompatible with most Python debuggers, which makes debugging run-tests.py a real pain. If there is only one test to run, skip using a thread for it. Note that --debug is not compatible with debugging tests, since it bypasses the output handling, which is where much of the excitement is.

sslutil: fix reversed logic (issue5034)

installer: add windows application version number to inno installer script This addition to the inno installer script means that the windows uninstaller registry key “DisplayVersion" is set to the application version number and will show in Add/Remove Programs.

run-tests: add 'diff' entry in json report This patch adds to the json report the "diff" between expected and observed result. This diff can be useful for automatically filing bug report on failing tests.

bookmarks: make _readactive safe when readlines raises ENOENT When reading over static http, the file isn't actually opened until the readlines() call, so we have to check for ENOENT IOErrors here too. This is necessary so that we can use the bmstore everywhere for managing the active bookmark, which will be true in the next change.

wix: add help for current internal topics This makes the changes in a79cba6cb206 and 84784f834b3a available on Windows. I'm not setup to make the installer, so someone with experience in this area should probably give it a look. In looking around to try to figure out how to build the installer, it looks like the Makefile may need an update to $DOCFILES.

help: fix quoting for bundle1 options

merge with stable

extdiff: use @command decorator to set up diff commands It can set "inferrepo" attribute appropriately.

extdiff: factor out list of common options

dispatch: copy inferrepo attribute to alias commands The other attributes are copied. Let's do the same for the inferrepo.

transplant: specify the right file and path for unfinishedstates

transplant: only use checkunfinished if not continue

transplant: correct language to use working directory

histedit: replace @addhisteditaction with @action @action supports verbs, messages, priority, and internal messages should be translated. internal means the action should not be listed. geteditcomment will construct the verbs list based on @actions (prefering priority over non priority, otherwise favoring verbs with short forms over verbs without).

histedit: prefer edit commit, edit message, use commit Selecting editing commits, rewording commit messages, and selecting commits are key actions, we will prefer them more generally in a future commit, this pulls them ahead before that to make the diffs easier to read. The remaining commands are left alphabetically sorted

histedit: replace editcomment with a function

debugignore: find out why a file is being ignored (issue4856) This patch adds a capability to hg debugignore: to explain why a given file is being ignores by mercurial. We display the filename, line and linenumber of the rule that lead us to ignore the file.

debugignore: find out if a file is being ignored Before this patch debugignore was just displaying the list of ignore patterns. This patch makes it support a list of filename as argument and tells the user if those given files are ignored or not.

dirstate: add a way to get the ignore file/line matching an ignored file This information will be used to improve debugignore (issue4856).

clone: move bookmarks and checkouts before pull help The bookmark/checkout help actually split the pull help. The subsequent verbose container is talking about pull too. This change puts the pull help back together again.

status: revert + flag-change == modified After just changing the flag on a file, plain 'hg status' will report the file as modified. However, after reverting a file to a previous revision's state and changing the flag, it will be reported as clean. Fix by comparing the flags that were previously ignored in context._buildstatus().

util: remove outdated comment about construction overhead An old implementation of this class (possibly only in my local repo) allocated nodes in the cache during construction time, making __init__ slow for large cache capacities. The current implementation lazily grow the cache size, making this comment wrong.

test-transplant.t: improve test coverage * ?, x, q * not a parent * --source * outstanding local changes * outstanding uncommitted merges * no revision checked out * checkopts all+branch+rev * checkopts all-branch * checkopts no-args * checkopts continue+all * revset:transplanted(...) * filter corrupted changeset

help: use backticks for progress.format keywords, correct letter case

log: help provide sort by date example

log: mention ordering a user complained that hg help log did not hint how to sort the output by date

transaction: remove 'if True:' This seems to be left over from 96dd93de548c (transaction: reorder unlinking .hg/journal and .hg/journal.backupfiles, 2015-10-16).

lazymanifest: check more return values in filtercopy Spotted by Bryan O'Sullivan (and vexingly not the static analyzer I've been using.)

mercurial: pass ui to extensions.load (issue5007) extensions.load does need ui argument to print error if an extension fails to load.

test-patchbomb.t: drop a number of now-redundant uses of "-n"

test-patchbomb.t: test use of sendmail program

merge: add options to warn or ignore on colliding unknown files A 'colliding unknown file' is a file that meets all of the following conditions: - is untracked or ignored on disk - is present in the changeset being merged or updated to - has different contents Previously, we would always abort whenever we saw such files. With this config option we can choose to warn and back the unknown files up instead, or even forgo the warning entirely and silently back the unknown files up. Common use cases for this configuration include a large scale transition of formerly ignored unknown files to tracked files. In some cases the files can be given new names, but in other cases, external "convention over configuration" constraints have determined that the file must retain the same name as before.

batchget: add support for backing up files We're going to use this in an upcoming feature.

merge: add a new 'backup' argument to get actions We're going to use this in an upcoming patch to back untracked files up when they're replaced by tracked ones.

_checkunknownfiles: turn 'conflicts' into a set We'll check for membership in this set in an upcoming patch.

checkunknownfiles: make control flow clearer In particular, make it clear that we only check for and abort on conflicts if force is not true.

_checkunknownfiles: rename 'aborts' to 'conflicts' In upcoming patches we'll be able to do more useful things than aborting.

origpath: move from cmdutil to scmutil This is a lower-level function so it doesn't need to be in cmdutil, and putting it here avoids a bunch of potential import cycle issues.

revlog: remove unnecessary cache validation in _chunks Previously, we likely called _chunkraw() multiple times in order to ensure it didn't change out from under us. I'm pretty certain this code had its origins in the days where we attempted to have thread safety of localrepository and thus revlog instances. revlog instances are already not thread safe for writing. And, as of Mercurial 3.6, hgweb uses a separate localrepository instance per request, so there should only be a single thread reading a revlog at a time. We more or less decided that attempting to make classes like revlog thread safe is a lost cause. So, this patch removes thread safety from _chunks. As a result, we make one less call into _chunkraw() when the initial read isn't serviced by the cache. This translates to savings of 4 function calls overall and possibly prevents the creation of an additional buffer view into the cache. I doubt this translates into any real world performance wins because decompression will almost certainly dwarf time spent in _chunks(). But it does make the code simpler, so it is an improvement.

revlog: return offset from _chunkraw() A subsequent patch will refactor _chunks() and the calculation of the offset will no longer occur in that function. Prepare by returning the offset from _chunkraw().

verify: get rid of some unnecessary local variables Now that all the major functionality has been refactored out, we can delete some unused local variables.

verify: move changelog verificaiton to its own function This makes verify more modular so extensions can hook into it.

verify: move manifest verification to its own function This makes verify more modular, making it easier for extensions to extend.