streamclone: rename and document maybeperformstreamclone() Upcoming patches will introduce bundle2 based streaming clones. Add "legacy" to the function name and add a docstring clarifying the intent of the function.

streamclone: move applyremotedata() into maybeperformstreamclone() Future work around stream cloning will be implemented in a bundle2 world. This code will only be used in the legacy code path and doesn't need to be abstracted or extensible.

branchmap: move branch cache code out of streamclone.py This is low-level branch map and cache manipulation code. It deserves to live next to similar code in branchmap.py. Moving it also paves the road for multiple consumers, such as a bundle2 part handler that receives branch mappings from a remote. This is largely a mechanical move, with only variable names and indentation being changed.

streamclone: move streamin() into maybeperformstreamclone() streamin() only had a single consumer. And it always only ever will because it is strongly coupled with the current, soon-to-be-superseded-by-bundle2 functionality. The return value has been dropped because nobody was using it.

streamclone: refactor maybeperformstreamclone to take a pullop Just like all the other pull steps. Consistency is good. This seems a little excessive right now since maybeperformstreamclone is such a short function. This will be addressed in a subsequent patch.

demandimport: replace more references to _demandmod instances _demandmod instances may be referenced by multiple importing modules. Before this patch, the _demandmod instance only maintained a reference to its first consumer when using the "from X import Y" syntax. This is because we only created a single _demandmod instance (attached to the parent X module). If multiple modules A and B performed "from X import Y", we'd produce a single _demandmod instance "demandmod" with the following references: X.Y = <demandmod> A.Y = <demandmod> B.Y = <demandmod> The locals from the first consumer (A) would be stored in <demandmod1>. When <demandmod1> was loaded, we'd look at the locals for the first consumer and replace the symbol, if necessary. This resulted in state: X.Y = <module> A.Y = <module> B.Y = <demandmod> B's reference to Y wasn't updated and was still using the proxy object because we just didn't record that B had a reference to <demandmod> that needed updating! With this patch, we add support for tracking which modules in addition to the initial importer have a reference to the _demandmod instance and we replace those references at module load time. In the case of posix.py, this fixes an issue where the "encoding" module was being proxied, resulting in hundreds of thousands of __getattribute__ lookups on the _demandmod instance during dirstate operations on mozilla-central, speeding up execution by many milliseconds. There are likely several other operation that benefit from this change as well. The new mechanism isn't perfect: references in locals (not globals) may likely linger. So, if there is an import inside a function and a symbol from that module is used in a hot loop, we could have unwanted overhead from proxying through _demandmod. Non-global imports are discouraged anyway. So hopefully this isn't a big deal in practice. We could potentially deploy a code checker that bans use of attribute lookups of function-level-imported modules inside loops. This deficiency in theory could be avoided by storing the set of globals and locals dicts to update in the _demandmod instance. However, I tried this and it didn't work. One reason is that some globals are _demandmod instances. We could work around this, but it's a bit more work. There also might be other module import foo at play. The solution as implemented is better than what we had and IMO is good enough for the time being. It's worth noting that this sub-optimal behavior was made worse by the introduction of absolute_import and its recommended "from . import X" syntax for importing modules from the "mercurial" package. If we ever wrote performance tests, measuring the amount of module imports and __getattribute__ proxy calls through _demandmod instances would be something I'd have it check.

demandimport: refactor processfromitem This will match the next patch smaller and easier to read.

demandimport: consolidate code for processing items in fromlist This code was mostly duplicated. An upcoming patch will add more complexity, making the duplication harder to justify. Consolidate the code.

pager: recreate stdout to make it line-buffered We want to see partial command results as soon as possible. But the buffering mode of stdout (= pager's stdin) was set to fully-buffered because it isn't associated with a tty. So, this patch recreates new stdout object to force its buffering mode. Because two file objects are associated with the same stdout fd and their destructors will call close(), one of them must be closed carefully. Python expects that the stdout fd never be closed even after sys.stdout.close() [1], but newstdout has no such hack. So this patch calls newstdout.close() immediately before duplicating the original stdout fd to sys.stdout. operation sys.stdout newstdout fd --------------------- ---------- --------- -------- newstdout.close() open closed closed os.dup2(stdoutfd, ..) open closed open del sys.stdout closed closed open [1] [1]: https://hg.python.org/cpython/file/v2.7.10/Python/sysmodule.c#l1391

pager: rename variables of backup fds The next patch will add backup file objects, so the original variable names would be confusing.

pager: inline _pagersubprocess() into _runpager() We don't need _pagersubprocess() because the fork version was removed at 59d794154e8d.

ui: send traceback of devel warning to appropriate output stream If ui.ferr is a command-server channel, traceback should be written to it.

util.system: compare fileno to see if it needs stdout redirection Future patches will reopen stdout to be line-buffered, so sys.stdout may be different object than sys.__stdout__.

exchange: move stream clone logic into pull code path Stream clones are a special case of clones. Clones are a special case of pull. Most of the logic for deciding what to do at pull time is in exchange.py. It makes sense for the stream clone determination to live there as well. This patch moves the calling of the stream clone code into pull(). The checks in streamclone.canperformstreamclone() ensure that we don't perform a stream clone unless it is possible. A future patch will convert maybeperformstreamclone() to accept a pullop to make it consistent with everything else in pull(). It will also grow some functionality (in case you doubted the necessity of a 4 line function).

exchange: teach pull about requested stream clones An upcoming patch will move the invocation of stream cloning logic to the normal pull code path (from localrepository.clone). In preparation for this, we teach pull() and pulloperation about whether a streaming clone is requested. The return logic in localrepository.clone() has been reformatted slightly because of line length issues.

streamclone: add explicit check for empty local repo Stream clone doesn't work with non-empty local repositories. In upcoming patches, we'll move stream cloning to the regular pull code path. Add an explicit check on the repository being empty to prevent streaming clones to non-empty repos.

streamclone: refactor code for deciding to stream clone Having this in a standalone function will eventually enable bundle2 to share code with the bundle1 code path. While I was here, I also added some comments to add clarity.

streamclone: move streaming clone logic from localrepo This is the last remnants of streaming clone code in localrepo.py. This is a mostly mechanical transplant of code to a new file. Only a rewrite of "self" to "repo" was performed. The code will be significantly refactored in upcoming patches. So don't scrutinize it too closely.

streamclone: move _allowstream() from wireproto While we're moving things into streamclone.py...

streamclone: move code out of exchange.py We bulk move functions from exchange.py related to streaming clones. Function names were renamed slightly to drop a component redundant with the module name. Docstrings and comments referencing old names and locations were updated accordingly.

streamclone: move stream_in() from localrepo Another basic content move. The underscore from the function name was removed to comply with naming standards.

streamclone: move applystreamclone() from localrepo.py Upcoming patches will modernize the streaming clone code. Streaming clone data and code kind of lives in its own world. exchange.py is arguably the most appropriate existing location for it. However, over a dozen patches from now it became apparent that there was a lot of code related to streaming clones and that having it contained within its own module would make it easier to comprehend. So, we establish streamclone.py. It's worth noting that streamclone.py existed a long time ago, last seen in the 1.6 release. It was removed in 04f76a954842. The function was renamed as part of the move because its old name was redundant with the new module name. The only other content change was "self" was renamed to "repo" and minor grammar in the docstring was updated.

exchange: add docstring to pull() This seems like the kind of important function that should be documented better.

localrepo: allow creating inherited locks This is part of a series that will allow locks to be inherited by subprocesses in limited circumstances.

error: make lock inheritance contract violations a subclass of RuntimeError This is more appropriate, per Pierre-Yves David.

templatekw: hide help of "branches" by DEPRECATED marker See 43e872a35f8a for details.

templatekw: remove dockeywords hack Now all template keywords are defined as real functions.

templatekw: port implementation of showparents() from changeset_templater It isn't cool, but we can peek at ui flag via repo.ui. So, it is possible to implement showparents() in templatekw, and therefore we can eliminate the dockeywords hack.

templatekw: reorder stub of showparents() function It will have an implementation.

changeset_printer: move _meaningful_parentrevs() to scmutil It will be used by templatekw.

test-run-tests: add globs for Windows There are two other unrelated failures in this test. For some reason child1 has a space after it, thus 2 spaces before the glob, otherwise the glob is ignored and removed.

test-commandserver: generate files with a fixed EOL for test stability The hashes were different on Windows.

test-debugextensions: sanitize JSON output for Windows Windows is printing a double backslash, which isn't handled by (glob): --- c:/Users/Matt/Projects/hg/tests/test-debugextensions.t +++ c:/Users/Matt/Projects/hg/tests/test-debugextensions.t.err @@ -47,7 +47,7 @@ { "buglink": "", "name": "color", - "source": "*/hgext/color.pyc", (glob) + "source": "c:\\Users\\Matt\\Projects\\hg\\hgext\\color.pyc", "testedwith": "internal" }, {

test-strip: add glob for Windows

bundle2: generate check:heads in a independent function

merge with stable

cmdutil: handle multiline translations of HG: messages safely Before this, if a localizer/localization included a multiline message, and didn't prefix the intermediate lines with 'HG: ', then the line would be a candidate for inclusion in the commit message -- which isn't ideal.

strip: compress bundle2 backup using BZ Storing uncompressed bundle on disk would be a regression. Strip backup using bundle2 are now compressed when requested.

writebundle: add a compression argument for the bundle2 case Bundle2 compression is more complex than the bundle1 one. Therefore it is handled by the bundler itself. Moreover, on-disk bundle2 will probably have a large number of flavors so simply adding a new "format" for it does not seems the way to go. This will be used in the next changeset to compress bundle2 strip backup.

strip: use bundle2 + cg2 by default when repository use general delta The bundle10 format (plain changegroup-01) does not support general delta and result into expensive delta re-computation when stripping. If the repository is general delta, we store backups as bundle20 containing a changegroup-02 payload. We remove the experimental feature related to strip backup bundle format because this achieve the same goal in a leaner way. Removing the experimental option is fine, that is why it experimental in the first place. Compression of these bundles are coming in later changesets.

run-tests: report paths saved by --keep-tmpdir

urls: bulk-change primary website URLs

urls: bulk-change BTS urls to new location

Added signature for changeset 9a466b9f9792

Added tag 3.5.2 for changeset 9a466b9f9792

largefiles: restore archiving largefiles with hgweb (issue4859) This regressed in 7699d3212994, when trying to conditionally disable archiving of largefiles. I'm not sure if wrapfunction() is the right way to do this, but it seems to work. The mysterious issue with lfstatus getting out of sync in the proxy and the unfiltered view crops up again here. See the referenced cset for more info.

i18n-pt_BR: synchronized with f31ddc9bfa5f

help: hide deprecated filesets, revsets and template items if not verbose This allows us to hide {branches} template keyword in a better way. Currently it is achieved by copying keywords table and deleting 'branches' from it.