heads: enable pager

branches: enable pager

py3: fix slicing of bytes in revset.formatspec()

py3: make set of revset operators and quotes in bytes

py3: convert set of revset initial symbols back to bytes Otherwise tokenize() would fail due to comparison between unicode and bytes.

pycompat: add helper to iterate each char in bytes

branchmap: fix python 2.6 by using util.buffer() instead of passing bytearray

rebase: allow rebasing children of wd to wd if a new branch has been set (BC) The named branch of the leaf changeset can be changed by updating to it, setting the branch, and amending. But previously, there was no good way to *just* change the branch of several linear changes. If rebasing changes with another parent to '.', it would pick up a pending branch change up. But when rebasing changes that have the same parent, it would fail with 'nothing to rebase', even when the branch name was set differently. To fix this, allow rebasing to same parent when a branch has been set.

merge: check current wc branch for 'nothing to merge', not its p1 The working directory will usually be clean or very clean, and wc will usually have the same branch as its parent. This change will thus usually not make any difference and is done as a separate change to show that. It will be used in a later change.

lock: do not encode result of gethostname on Python 2 If a hostname contained non-ascii character, str.encode() would first try to decode it to a unicode and raise UnicodeDecodeError.

py3: prove `hg files --rev` works

tests: make a variable for hg binary location in test-check-py3-commands The number of which calls in here is starting to get silly.

lock: encode result of gethostname into a bytestring

config: avoid using a mutable default Nothing *currently* mutates this list, but the moment something does it'll be shared between all config instances. Avoid this eventuality.

localrepo: deprecate 'repo.join' in favor of 'repo.vfs.join' localrepo have an insane amount of method. Accessing the feature through the vfs is not really harder and allow us to schedule that method for removal.

pycompat: move imports of cStringIO/io to where they are used There's no point to import cStringIO as io since we have to select StringIO or BytesIO conditionally.

rbc: empty (and invalid) rbc-names file should give an empty name list An empty file (if it somehow should exist) used to give a list with an empty name. That didn't do any harm, but it was "wrong". Fix that.

rbc: use struct unpack_from and pack_into instead of unpack and pack These functions were introduced in Python 2.5 and are faster and simpler than the old ones ... mainly because we can avoid intermediate buffers: $ python -m timeit -s "_rbcrecfmt='>4sI'" -s 's = "x"*10000' -s 'from struct import unpack' 'unpack(_rbcrecfmt, buffer(s, 16, 8))' 1000000 loops, best of 3: 0.543 usec per loop $ python -m timeit -s "_rbcrecfmt='>4sI'" -s 's = "x"*10000' -s 'from struct import unpack_from' 'unpack_from(_rbcrecfmt, s, 16)' 1000000 loops, best of 3: 0.323 usec per loop $ python -m timeit -s "from array import array" -s "_rbcrecfmt='>4sI'" -s "s = array('c')" -s 's.fromstring("x"*10000)' -s 'from struct import pack' -s "rec = array('c')" 'rec.fromstring(pack(_rbcrecfmt, "asdf", 7))' 1000000 loops, best of 3: 0.364 usec per loop $ python -m timeit -s "from array import array" -s "_rbcrecfmt='>4sI'" -s "s = array('c')" -s 's.fromstring("x"*10000)' -s 'from struct import pack_into' -s "rec = array('c')" -s 'rec.fromstring("x"*100)' 'pack_into(_rbcrecfmt, rec, 0, "asdf", 7)' 1000000 loops, best of 3: 0.229 usec per loop

revlog: use bytes() instead of str() to get data from memoryview Fixes `files -v` on Python 3.

util: teach url object about __bytes__ __str__ tries to do something reasonable, but someone else more familiar with encoding bugs should check my work.

manifest: ensure paths are bytes (not str) in pure parser

manifest: now that node.bin is available, use it directly Previously we were getting it through revlog, which is a little unusual.

manifest: use node.bin instead of .decode('hex') The latter doesn't work in Python 3.

manifest: add __next__ methods for Python 3 Python 3 renamed .next() in the iterator protocol to __next__().

files: use native string type to load rev opt from dict

store: fix many single-byte ops to use slicing in _auxencode

py3: add "b" prefix to string literals related to module policy String literals without explicit prefix in __init__.py and policy.py are treated as unicode object on Python3, because these modules are loaded before setup of our specific code transformation (the later module is imported at the beginning of __init__.py). BTW, "modulepolicy" in __init__.py is initialized by "policy.policy". This causes issues below; - checking "policy" value in other modules causes unintentional result For example, "b'py' not in (u'c', u'py')" returns True unintentionally on Python3. - writing "policy" out fails at conversion from unicode to bytes 62939e0148f1 fixed this issue for default code path, but "policy" can be overridden by HGMODULEPOLICY environment variable (it should be rare case for developer using Python3, though). This patch does: - add "b" prefix to all string literals, which are related to module policy, in modules above. - check existence of HGMODULEPOLICY, and overwrite "policy" only if it exists For simplicity, this patch omits checking "supports_bytes_environ", switching os.environ/os.environb, and so on (Yuya agreed this in personal talking)

py3: drop unused aliases to array.array which are replaced with bytearray

pycompat: default to BytesIO instead of StringIO

repoview: specify setattr values as native strings

revlog: use bytes() to ensure text from _chunks is a reasonable type

revlog: extract first byte of revlog with a slice so it's portable

revsetlang: slice out single bytes instead of indexing For portability with Python 3.

lock: use %d to format integer into a bytestring

parser: use %d instead of %s for interpolating error position Error position is an int, so we should use %d instead of %s. Fixes failures on Python 3.

manifest: unbreak pure-python manifest parsing on Python 3

context: use portable construction to verify int parsing

ui: portably bytestring-ify url object

scmutil: fix key generation to portably bytestringify integer

branchmap: stringify int in a portable way We actually need a bytes in Python 3, and thanks to our nasty source loader this will portably do the right thing.

branchmap: don't use buffer() on Python 3 This is certainly slower than the Python 2 code, but it works, and we can revisit it later if it's a problem.

py3: use bytearray() instead of array('c', ...) constructions Portable from 2.6-3.6.

summary: don't explicitly str() something we're about to %s str() is wrong on Python 3 here, and %s implicitly calls str() anyway, so this was just extra dancing for no reason.

context: implement both __bytes__ and __str__ for Python 3 They're very similar, for obvious reasons.

context: work around `long` not existing on Python 3 I can't figure out what this branch is even trying to accomplish, and it was introduced in ac89a23ca814 which doesn't really shed any insight into why longs are treated differently from ints.

phases: explicitly evaluate list returned by map On Python 3 map() returns a generator, which bool()s to true even if it had an empty input set. Work around this by using list() on the map() result.

ui: check for --debugger in sys.argv using r-string to avoid bytes on py3 Our source loader was errantly turning this --debugger into a bytes, which was then causing me to still get a pager when I was using the debugger on py3. That made life hard.

minirst: use bytes.strip instead of str.strip bytes.strip exists in Python 2.6 and Python 2.7 also.