httppeer: log commands for version 2 peer This will aid testing and debugging. Differential Revision: https://phab.mercurial-scm.org/D4437

wireprotov2peer: add TODO about streaming responses This is a pretty big deficiency in the current implementation. We don't want to forget about this. Differential Revision: https://phab.mercurial-scm.org/D4435

tests: update relnotes test for actual output I'm unclear why I didn't see this before but I consistently see it now. In any event, it doesn't appear to be a regression, so let's just bake it into the test. Differential Revision: https://phab.mercurial-scm.org/D4463

py3: use print as a function in tests/test-hgweb.t Differential Revision: https://phab.mercurial-scm.org/D4461

py3: bytestr a bytes val to make sure we get bytechr while iterating Differential Revision: https://phab.mercurial-scm.org/D4460

py3: make regexes in hgext/keyword.py bytes # skip-blame because just b'' prefixes Differential Revision: https://phab.mercurial-scm.org/D4459

py3: add more missing b'' prefixes in test files # skip-blame because just b'' prefixes Differential Revision: https://phab.mercurial-scm.org/D4458

py3: write the file in str mode in tests/test-rename-merge2.t This is better then converting the value the value of sys.argv to bytes. This makes the test pass on Python 3. Differential Revision: https://phab.mercurial-scm.org/D4457

py3: add missing b'' prefixes in tests/badserverext.py # skip-blame because just b'' prefixes Differential Revision: https://phab.mercurial-scm.org/D4456

py3: handle keyword arguments correctly in hgext/acl.py The keys of keyword arguments on python 3 should be str, so when we try to get some key from them, we must make sure we are using str. # skip-blame because just b'' prefix Differential Revision: https://phab.mercurial-scm.org/D4455

py3: don't return the revid as unicode in hgext/convert/subversion.py I tried digging why u'' was added in first place, and I was unable to found something relevant. This might be because some API's takes unicodes, I am not sure. Differential Revision: https://phab.mercurial-scm.org/D4454

py3: make sure we pass str in os.sysconf in hgext/convert/common.py # skip-blame because just r'' prefix Differential Revision: https://phab.mercurial-scm.org/D4453

manifest: fix leak on error return from lazymanifest_filtercopy() Spotted by ASAN. free(copy->lines) and Py_DECREF(copy->pydata) are replaced by Py_XDECREF(copy), which should call lazymanifest_dealloc(). Freeing half-initialized copy->lines is safe since copy->numlines holds a valid value.

manifest: incref/decref copy->pydata to clarify 'copy' holds a reference

dirstate: use tuple interface to fix leak in pack_dirstate() Spotted by ASAN. Unlike PyTuple_GET_ITEM(), PySequence_ITEM() returns a new reference. This bug could be fixed by inserting Py_CLEAR() and Py_XDECREF() appropriately, but I think requiring a tuple object is simpler and less error-prone. The cext version is jumped to 10 since 6..9 are used in the default branch. We'll need to bump it again at merge.

xdiff: fix leak in hunk_consumer() Spotted by ASAN. Since PyList_Append() does not "steal" a reference, Py_DECREF() is always required. Perhaps, this is the largest leak in this series.

base85: fix leak on error return from b85decode() Spotted by ASAN. We don't need to initialize 'out' to NULL, but I decided to do that for clarity.

merge with stable

Added signature for changeset ede3bf31fe63

Added tag 4.7.1 for changeset ede3bf31fe63

hgweb: load revcount + 1 entries to fill nextentry in log page (issue5972) "revcount + 1" is moved to the call site to make it clearer.

revlog: fix size of Python nodetree object Follows up 9f097214fbf3.

revert: stabilize status message of chunks selected interactively Unfortunately, patch.filterpatch() doesn't preserve the order of the input files. We have to sort them manually.

cborutil: add a buffering decoder The sansiodecoder leaves it up to the callers to feed in data that wasn't fully consumed last time. This commit implements a decoder that performs buffering of leftover chunks from the previous invocation. It otherwise behaves identically to sansiodecoder. Differential Revision: https://phab.mercurial-scm.org/D4434

cborutil: remove readindefinitebytestringtoiter() This was implemented as part of implementing streaming encoding. It was never used outside of tests. Now that we have a full CBOR decoder, it can be used for incremental decoding of indefinite-length byte strings. This also removes the last use of the vendored cbor2 package from this module. Differential Revision: https://phab.mercurial-scm.org/D4433

cborutil: implement sans I/O decoder The vendored CBOR package decodes by calling read(n) on an object. There are a number of disadvantages to this: * Uses blocking I/O. If sufficient data is not available, the decoder will hang until it is. * No support for partial reads. If the read(n) returns less data than requested, the decoder raises an error. * Requires the use of a file like object. If the original data is in say a buffer, we need to "cast" it to e.g. a BytesIO to appease the decoder. In addition, the vendored CBOR decoder doesn't provide flexibility that we desire. Specifically: * It buffers indefinite length bytestrings instead of streaming them. * It doesn't allow limiting the set of types that can be decoded. This property is useful when implementing a "hardened" decoder that is less susceptible to abusive input. * It doesn't provide sufficient "hook points" and introspection to institute checks around behavior. These are useful for implementing a "hardened" decoder. This all adds up to a reasonable set of justifications for writing our own decoder. So, this commit implements our own CBOR decoder. At the heart of the decoder is a function that decodes a single "item" from a buffer. This item can be a complete simple value or a special value, such as "start of array." Using this function, we can build a decoder that effectively iterates over the stream of decoded items and builds up higher-level values, such as arrays, maps, sets, and indefinite length bytestrings. And we can do this without performing I/O in the decoder itself. The core of the sans I/O decoder will probably not be used directly. Instead, it is expected that we'll build utility functions for invoking the decoder given specific input types. This will allow extreme flexibility in how data is delivered to the decoder. I'm pretty happy with the state of the decoder modulo the TODO items to track wanted features to help with a "hardened" decoder. The one thing I could be convinced to change is the handling of semantic tags. Since we only support a single semantic tag (sets), I thought it would be easier to handle them inline in decodeitem(). This is simpler now. But if we add support for other semantic tags, it will likely be easier to move semantic tag handling outside of decodeitem(). But, properly supporting semantic tags opens up a whole can of worms, as many semantic tags imply new types. I'm optimistic we won't need these in Mercurial. But who knows. I'm also pretty happy with the test coverage. Writing comprehensive tests for partial decoding did flush out a handful of bugs. One general improvement to testing would be fuzz testing for partial decoding. I may implement that later. I also anticipate switching the wire protocol code to this new decoder will flush out any lingering bugs. Differential Revision: https://phab.mercurial-scm.org/D4414

tests: remove use of string in CBOR test We don't use the CBOR string major type in the wire protocol. Let's not test for it. Differential Revision: https://phab.mercurial-scm.org/D4413

internals: document CBOR utilization I spoke with some people at Mozilla about CBOR and they advised me that we should be careful about the subset of CBOR we use in order to mitigate security, performance, and compatibility concerns. This commit establishes a document that attempts to formalize our use of CBOR. Its main limitations are on what types are allowed. It explicitly enumerates which types are supported. Notable missing features include: * Indefinite-length arrays and maps * Text strings (bytes all the way) * Floats * Date/time types * Big integers * Use of indefinite-length byte strings for map keys, values in containers. If we have a need for any of these, we can have a discussion about them when the time comes. Differential Revision: https://phab.mercurial-scm.org/D4412

py3: add new passing test to whitelist found by buildbot Differential Revision: https://phab.mercurial-scm.org/D4451

py3: alias xrange to range in tests/test-fastannotate-revmap.py xrange is not available on Python 3. Differential Revision: https://phab.mercurial-scm.org/D4450

py3: add r'' prefix to prevent b'' being prepended The keys of keyword arguments should be str. # skip-blame because we are adding just r'' prefixes. Differential Revision: https://phab.mercurial-scm.org/D4449

revert: fix the inconsistency of status msgs in --interactive mode Before this patch we were priting every action msg before actually performing that action and that was resulting in inconsistencies; like in --interactive session if user decided to not revert any changes in a file foo, still there will be a msg on console saying "reverting foo". To fix this, I have made some changes to print status msg just before the action it is going to perform, no matter if --interactive or not. Changes made in test-revert-interactive.t reflect the changed behavior. There are also some changes in test-revert.t because of change in the order of messages. Differential Revision: https://phab.mercurial-scm.org/D4380