help: define list of keywords that should be excluded from non-verbose output This list will be reused by the other deprecated/experimental handling.

merge with stable

unbundle: cleanly abort on unknown bundle2 feature The exception wasn't caught and resulted in a traceback.

phases: return zero for no-op operations (issue4751) (BC) It is rather unhelpful to return 1 if there were no changes because the request matches the current state of phases. So we just undo that.

help: add config.troubleshooting section at the top

dispatch: don't stack trace on commands like `hg .log` This used to stack trace because it raised a util.Abort which wasn't handled in this block. We now handle it. Additionally, we error out earlier instead of plodding on and showing the "log" entry of the plain `hg help` output.

gitweb, monoblue: port highlighting linked lines from paper This is adapted from 41c4bdd1d585, fbfe5748ef3e and f3393d458bf5.

gitweb, monoblue: fix vertical align of spans in .sourcelines Empty lines in file view could produce an inexplicable margin before the next line (most noticeable in browsers on webkit/blink engine). That was making empty lines seem taller than the rest. Instead of using default vertical align, let's set it to 'top'. This issue is actually present in paper, and only recently got into gitweb (2239626369f5) and monoblue (119202d4d7a4). There's a bit more to it in paper, so that will be dealt with in a future patch. Recipe to see live: preferably using a webkit/blink browser, such as chromium, browse a file with empty lines, e.g. https://selenic.com/hg/file/3.5/README#l8 Selecting a block of text that includes empty lines will reveal white "breaks" in the selection. Highlighted line (#l8) also shows such a break below itself.

merge: fix mergestate comment

rebase: avoid losing branch commits with --keepbranch (issue4835)

lock.release: do not unlink inherited locks This is part of a series that will allow locks to be inherited by subprocesses in limited circumstances. A subprocess unlinking a lock will lead to potential corruption from other concurrent processes.

lock: add a method to reacquire the lock after subprocesses exit This is part of a series that will allow locks to be inherited by subprocesses in limited circumstances.

lock: add a method to prepare the lock for inheritance This is part of a series that will allow locks to be inherited by subprocesses in limited circumstances.

lock: introduce state to keep track of inheritance This is part of a series that will allow locks to be inherited by subprocesses in limited circumstances. In upcoming patches we will refer to this state.

error: add an exception to indicate lock inheritance API contract violations

clone: check update rev for being True In 30be3aeb5344, there was an attempt to fallback to looking up the update revision assuming it was always a rev but the documentation states: True means update to default rev, anything else is treated as a revision Therefore, we should only fallback to looking up the update rev if it is not True. This bug was found in hg-git and I couldn't think of a test that does this in pure Mercurial since the source repository is checked for the revision as well (and therefore gracefully falls back).

clone: fix over-indented continuation line

resolve: consistently describe re-merge + unresolved

mercurial: add debugextensions command (issue4676) Add debugextensions command to help users debug their extension problems. If there are no extensions command prints nothing, otherwise it prints names of extension modules. If quiet or verbose option is not specified it prints(after extensions name) last version of mercurial in which given module was tested for non internal modules or not tested with user mercurial version. If verbose is specified it prints following information for every extension: extension name, import source, testedwith and buglink information. Extensions are printed sorted by extension name.

dispatch: stop warning about EPIPE in --debug mode It seems silly for "hg --debug manifest | less" to print a scary message after the user hits "q" in less. hg should just exit silently instead, since EPIPE on stdout is a perfectly reasonable result.

rebase: don't rebase obsolete commit whose successor is already rebased This patch avoids unnecessary conflicts to resolve during rebase for the users of changeset evolution. This patch modifies rebase to skip obsolete commits if they are being rebased on their successors. It introduces a new rebase state 'revprecursor' for these revisions that are being skipped and a new message to inform the user of what is happening. This feature is gated behind the config flag experimental.rebaseskipobsolete When an obsolete commit is skipped, the output is: not rebasing 14:9ad579b4a5de "I", already in destination as 17:fc37a630c901 "K"

check-code: forbid mutable value for default argument default value are common to all call. Using mutable value is a classical source of bug in Python. We forbid it. The regexp (Courtesy of Matt Mackall) is only catching such value on the first line of a definition, but that will be good enough for now.

httpconnection: remove a mutable default argument Mutable default arguments are know to the state of California to cause bugs.

transplant: remove a mutable default argument Mutable default arguments are know to the state of California to cause bugs.

mq: remove a mutable default argument Mutable default arguments are know to the state of California to cause bugs. The underlying function already handle "None" as an option value, so we do not need to do anything else.

largefiles: remove a mutable default argument Mutable default arguments are know to the state of California to cause bugs.

largefiles: remove a mutable default argument Mutable default arguments are know to the state of California to cause bugs.

largefiles: remove a mutable default argument Mutable default arguments are know to the state of California to cause bugs.

largefiles: remove a mutable default argument Mutable default arguments are know to the state of California to cause bugs.

largefiles: remove a mutable default argument Mutable default arguments are know to the state of California to cause bugs.

largefiles: remove a mutable default argument Mutable default arguments are know to the state of California to cause bugs.

largefiles: remove a mutable default argument Mutable default arguments are know to the state of California to cause bugs.

largefiles: remove a mutable default argument Mutable default arguments are know to the state of California to cause bugs.

largefiles: remove a mutable default argument Mutable default arguments are know to the state of California to cause bugs.

histedit: remove a mutable default argument Mutable default arguments are know to the state of California to cause bugs.

templater: remove a mutable default argument Mutable default arguments are know to the state of California to cause bugs.

templater: remove a mutable default argument Mutable default arguments are know to the state of California to cause bugs.

templater: remove a mutable default argument Mutable default arguments are know to the state of California to cause bugs.

templater: remove a mutable default argument Mutable default arguments are know to the state of California to cause bugs.

templater: remove a mutable default argument Mutable default arguments are know to the state of California to cause bugs.

addremove: remove a mutable default argument Mutable default arguments are know to the state of California to cause bugs.

match: remove a mutable default argument Mutable default arguments are know to the state of California to cause bugs. We added support for None in the underlying function in the parent commit. therefore we do not need to do anything but passing None.

match: remove a mutable default argument Mutable default arguments are know to the state of California to cause bugs.

match: remove a mutable default argument Mutable default arguments are know to the state of California to cause bugs.

match: remove a mutable default argument Mutable default arguments are know to the state of California to cause bugs.

addremove: remove a mutable default argument Mutable default arguments are know to the state of California to cause bugs.

tag: remove a mutable default argument Mutable default arguments are know to the state of California to cause bugs. We just added support of None for the underlying function, so nothing else the required.

commit: remove a mutable default argument Mutable default arguments are know to the state of California to cause bugs.

lock: move acquirefn call to inside the lock We're going to need to call it again as part of reinitialization after a subprocess inherits the lock.

localrepo: call lock.lock with releasefn as a keyword arg We'll be adding an acquirefn argument soon, and this makes that clearer.

copies: move debug statement to appropriate place

bidmerge: choose shortest list of diverge and rename/delete warnings Slightly less arbitrary than choosing the first set.

copies: rename diverge2 to divergeset for clarity

copies: begin separating mergecopies sides

copies: rename ctx() to getfctx() for clarity

monoblue: port code selection without line numbers from gitweb This is adapted from 2239626369f5. It also fixes issue4790 in monoblue; tab characters now have meaningful width on the modified pages (file view, file diff, changeset).

help: copy-edit description of ui.supportcontact

ui: avoid mutable default arguments I almost introduced a bug around this code by accidentally mutating a default argument. There's no reason for these to exist. It is OK to not assign {} to environ in ui.system because util.system knows how to deal with that.

util: avoid mutable default arguments I almost introduced a bug around this code by accidentally mutating a default argument. There's no reason for these to exist.

obsstore: fast path to check if obsstore is empty

obsstore: delay loading markers from obsstore file This will allow us to use cached revisions without parsing obsstore. Because _version isn't determined at __init__, the debugobsconvert command no longer works correctly. I'll fix it by a separate patch for the evolve extension.

obsstore: initialize _all markers without using _addmarkers() The next patch will make _all variable propertycached to avoid costly parsing of obsstore. This means we can't call _addmarkers() to initialize _all. Because all cached markers depend on _all, it isn't necessary to update these caches when _all is initially loaded.

revset: avoid implicit None testing in revset Implicit None testing is a very good way to get in trouble. We explicitly test for None.

revset: speed up existence checks for ordered filtered sets Previously, calling 'if foo:' on a ordered filtered set would start iterating in whatever the current direction was and return if a value was available. If the current direction was ascending, but the set had a fastdesc available, this meant we did a lot more work than necessary. If this was applied without my previous max/min fixes, it would improve max() performance (this was my first attempt at fixing the issue). Since those previous fixes went in though, this doesn't have a visible benefit in the benchmarks, but it does seem clearly better than it was before so I think it should still go in.

revset: remove existence check from min() and max() min() and max() would first do an existence check. Unfortunately existence checks can be slow in certain situations (like if the smartset is a list, and quickly iterable in both ascending and descending directions, then doing an existence check will start from the bottom, even if you want to check the max()). The fix is to not do the check, and just handle the error if it happens. In a large repo, this speeds up: hg log -r 'max(parents(. + .^) - (. + .^) & ::master)' from 3.5s to 0.85s. That revset is contrived and just for testing. In our real case we used 'bundle()' in place of '. + .^' Interesting perf numbers for the revset benchmarks: max(draft() and ::tip) => 0.027s to 0.0005s max(author(lmoscovicz)) => 2.48s to 0.57s min doesn't show any perf changes, but changing it as well will prevent a perf regression in my next patch. Result from revset benchmark revset #0: draft() and ::tip min max 0) 0.001971 0.001991 1) 0.001965 0.000428 21% revset #1: ::tip and draft() min max 0) 0.002017 0.001912 1) 0.001896 94% 0.000421 22% revset #2: author(lmoscovicz) min max 0) 1.049033 1.358913 1) 1.042508 0.319824 23% revset #3: author(lmoscovicz) or author(mpm) min max 0) 1.042512 1.367432 1) 1.019750 0.327750 23% revset #4: author(mpm) or author(lmoscovicz) min max 0) 1.050135 0.324924 1) 1.070698 0.319913 revset #5: roots((tip~100::) - (tip~100::tip)) min max 0) 0.000671 0.001018 1) 0.000605 90% 0.000946 92% revset #6: roots((0::) - (0::tip)) min max 0) 0.149714 0.152369 1) 0.098677 65% 0.100374 65% revset #7: (20000::) - (20000) min max 0) 0.051019 0.042747 1) 0.035586 69% 0.016267 38%

update: move default destination into a revset This is another step toward having "default" destination more clear and unified. Not all the logic is there because some bookmark related computation happened elsewhere. It will be moved later. The function is private because as for the other ones, cleanup is needed before we can proceed.

merge: move default destination computation in a revset This is another step toward having "default" destination more clear and unified.

mergecmd: simplify conditional The previous if tested the same thing with 'if repo._activebookmark'. We make the if/else logic clearer before a bigger refactoring.

rebase: move destination computation in a revset This is the first step toward making the "default destination" logic more clear and unified. The revset is private because I'm happy to delay the bikeshedding until after the clean up happened.

debian: include bash completions in mercurial-common

debian: install hgk as part of mercurial-common (issue4829) Leaving the hgk binary in /usr/bin causes some lintian warnings, and downstream packages poke it in /usr/share/mercurial, so we'll just stash it in there. Rather than patch hgk.py as part of the Mercurial install, just drop a config file in /etc/mercurial/hgrc.d that points to the installed hgk.

debian: install config files as part of mercurial-common Future patches will start putting config files in /etc/mercurial/, this just installs them.

debian: configuration so that cacerts is properly loaded This will be included in the mercurial-common package in a followup patch.

debian: install hg-ssh to /usr/bin just like downstream

highlight: remove temporary hack to overwrite repo.getcwd Now hgweb does it globally.

hgweb: overwrite cwd to resolve file patterns relative to repo (issue4568) It's useless to handle file patterns as relative to the cwd of the server process. The only sensible way in hgweb is to resolve paths relative to the repository root. It seems dirstate.getcwd() isn't used to get a real file path, so this patch won't cause problem.

dirstate: state that getcwd() shouldn't be used to get real file path hgweb will force it to be '' so that file patterns can be resolved relative to the repository root. I want to clarify that is correct.

merge: move merge step to the end Resolving other conflicts before merge ones is better because the state before the merge is as consistent as possible. It will also help with future work involving automatic resolution of merge conflicts with an external merge driver. There are no ordering issues here because it is easy to verify that the same file is never in both the dg/dm and the m sets.

lock: factor out lock testing into a separate function This is going to be needed for upcoming work with lock inheritance.

lock: factor code to read lock into a separate function This is going to be needed for upcoming work with lock inheritance.

tests: add unit tests for locking code We're going to make significant changes to lock behavior soon.

gitweb: port code selection without line numbers from paper This is adapted from f2e4fdb3dd27 and e92d4b8530cb. It also fixes issue4790 in gitweb; tab characters now have meaningful width on the modified pages (file view, file diff, changeset).

obsolete: remove unused _knownrevs function The call site was removed at cd62532c62a1.

bookmark: do not crash when active bookmark is forward and --date is used The logic that decides where to update according to the active bookmark location (when not on ".") was setting the rev to update to before we process --date. This lead to --date processing aborting because of duplicated specification. We reorder the two pieces of code and add a test for this.

bookmark: actually test update behavior in both cases The test claimed to test pull --update behaved the same way as pull + update, but the behavior of pull + update was never tested. We now test both.

coal: reuse style-paper.css and use a separate css file for visual tweaks To remove another big chunk of duplication from coal hgweb style, we can move all visual tweaks to style-extra-coal.css and include it together with style-paper.css.

coal: reuse all templates from paper/map by %including the file Before, coal/map simply had all the templates copied and pasted from paper/map file. It was easy to make a change to paper that would get into coal only partially and just sit there until something like 399e970e35c8 happened. Let's remove this duplication from coal/map by using %include to reuse templates from paper/map directly.

help/config: reword committemplate external editor text

help/config: reword committemplate multibyte character text

help/config: use :hg:`help config....` notation

help/config: omit True or False

help/config: capitalize items

tests: add more doctests for check-translation deprecated

tests: cleanup check-translation deprecated

gitweb: add author to filelogentry The line is copied from shortlogentry template.

monoblue: add author to filelogentry The line is copied from shortlogentry template.

monoblue: split a long line in filelogentry template The whole td has a nowrap class, which disallows breaking the line, so it's not required to use non-breakable spaces.

readbundle: fix typo of None compression The test simulates pre-d1b16a746db6 hgweb that sends "unbundle" capability with no argument.

readbundle: map 'HG10UN' to None compression In line with the other previous changes

getsubset: use None to request uncompressed changegroup

bundle: use None when unpacking uncompressed changegroup Let's be more modern!

writebundle: use 'None' instead of 'UN' for the bundle2 case Let's be modern!

compression: use 'None' for no-compression This seems more idiomatic and clearer. We still support both None and 'UN' for now because no user are migrated.

changegroup: move all compressions utilities in util We'll reuse the compression for other things (next target bundle2), so let's make it more accessible and organised.

obsolete: clarify that 'successorssets' returns the latest successors We do not return the first successors we found, we returns the latest (non obsolete (mostly)) one following the obsolete link transitively. We update the documentation to make this clean.

obsolete: drop an empty line at the end of a docstring This empty line is useless, let's drop it.

traceback: allow providing a local support contact point The extensions blaming code is fine for casual users but pretty terrible for corporate environments that can deploy a large amount of extensions to unsuspecting users. Reports will likely blame a random "innocent" extension (in our case crecord) and the hint in the message will triggers endless debug attempts from the user. We introduce a "ui.supportcontact" option that allow such big company to redirect their users to their own support desk. This disables all extensions blaming and just point people to the local support in all cases.

dispatch: pre-indent the extensions blaming logic We are about to put some real conditional here, but pre-indenting in it's own changesets makes next patch much cleaner.

tests: check for inconsistently translated DEPRECATED Mercurial expects DEPRECATED to be translated consistently, not doing that breaks Mercurial.

i18n-fr: reject translation which is missing DEPRECATED

i18n-pt_BR: select a single definition of DEPRECATED Mercurial expects DEPRECATED to be translated consistently, not doing that breaks Mercurial.

i18n-sv: select a single definition of DEPRECATED Mercurial expects DEPRECATED to be translated consistently, not doing that breaks Mercurial.

i18n-ro: use ()s instead of [] for DEPRECATED

i18n-ro: include translation of DEPRECATED

i18n-zh_CN: include translation of DEPRECATED

i18n-it: include translation of DEPRECATED

i18n-da: include translation of DEPRECATED

test-i18n: always run non gettext tests

localrepo: refresh filecache stats only if transaction finished successfully If commit is aborted by pretxncommit hook, in-memory changelog and manifest have entries that would be added. So they must be discarded on invalidate(). But the mechanism introduced by a710936c3037 doesn't handle this case well. It tries to mitigate the penalty of invalidate() by marking in-memory cache as "clean" on unlock assuming that they are identical to the stored data. But this assumption is wrong if stored data are rolled back by tr.abort(). This patch moves the hook to post-close action so that it will never be triggered on abort. This bug was originally reported to thg, which is only reproducible in command-server process on unix, evolve disabled. https://bitbucket.org/tortoisehg/thg/issues/4285/

localrepo: move closure of lock release to class It only captures "self", so it isn't necessary to be created dynamically.