rust-python3: compatibility fix for incoming PyLong On Python3, PyInt is PyLong and it doesn't have the `value()` method. Re upcasting to PythonObj as done here works, but we might prefer taking a PythonObj from the onset (would require more testing) Differential Revision: https://phab.mercurial-scm.org/D6397

py3: add one new passing test found by buildbot Differential Revision: https://phab.mercurial-scm.org/D6412

discovery: slowly increase sampling size Some pathological discovery runs can requires many roundtrip. When this happens things can get very slow. To make the algorithm more resilience again such pathological case. We slowly increase the sample size with each roundtrip (+5%). This will have a negligible impact on "normal" discovery with few roundtrips, but a large positive impact of case with many roundtrips. Asking more question per roundtrip helps to reduce the undecided set faster. Instead of reducing the undecided set a linear speed (in the worst case), we reduce it as a guaranteed (small) exponential rate. The data below show this slow ramp up in sample size: round trip | 1 | 5 | 10 | 20 | 50 | 100 | 130 | sample size | 200 | 254 | 321 | 517 | 2 199 | 25 123 | 108 549 | covered nodes | 200 | 1 357 | 2 821 | 7 031 | 42 658 | 524 530 | 2 276 755 | To be a bit more concrete, lets take a very pathological case as an example. We are doing discovery from a copy of Mozilla-try to a more recent version of mozilla-unified. Mozilla-unified heads are unknown to the mozilla-try repo and there are over 1 million "missing" changesets. (the discovery is "local" to avoid network interference) Without this change, the discovery: - last 1858 seconds (31 minutes), - does 1700 round trip, - asking about 340 000 nodes. With this change, the discovery: - last 218 seconds (3 minutes, 38 seconds a -88% improvement), - does 94 round trip (-94%), - asking about 344 211 nodes (+1%). Of course, this is an extreme case (and 3 minutes is still slow). However this give a good example of how this sample size increase act as a safety net catching any bad situations. We could image a steeper increase than 5%. For example 10% would give the following number: round trip | 1 | 5 | 10 | 20 | 50 | 75 | 100 | sample size | 200 | 321 | 514 | 1 326 | 23 060 | 249 812 | 2 706 594 | covered nodes | 200 | 1 541 | 3 690 | 12 671 | 251 871 | 2 746 254 | 29 770 966 | In parallel, it is useful to understand these pathological cases and improve them. However the current change provides a general purpose safety net to smooth the impact of pathological cases. To avoid issue with older http server, the increase in sample size only occurs if the protocol has not limit on command argument size.

tests: make the grep pattern in remotefilelog-gcrepack portable (issue6122) test-remotefilelog-gcrepack was using "\" to escape "|" in the grep pattern. The most of implementations ignore "\" when it is followed by "|", so the regex works. However, OpenBSD doesn't ignore "\" and considers "|" part of the text instead of create two branches. Neither of both behaviors violate POSIX. This change removes the unnecessary escape character and changes grep to egrep, so the extended regular expression works on every unix. This is part of the bug 6122. Tested on OpenBSD, GNU, FreeBSD, NetBSD, Solaris 11 and BusyBox. Credits to Todd C. Miller, Paul de Weerd and Ingo Schwarze for helping me with it.

help: document new "bookmarksinstore" requirement in internals.requirements Differential Revision: https://phab.mercurial-scm.org/D6413

absorb: fix interactive mode I didn't know existed While investigating a bug in `hg absorb -e` I unintentionally discovered `hg absorb --interactive` and its brokenness. This adds a test and restores the functionality. Note that this interface is still marked experimental, so we can change this to be more sophisticated in the future. Differential Revision: https://phab.mercurial-scm.org/D6411

tests: work around libressl being different about error strings (issue6122) As far as I can tell, this is the right behavior. Thanks to Alex Gaynor for checking what the string means by looking at libressl sources for me. Differential Revision: https://phab.mercurial-scm.org/D6410

merge with stable

templatekw: change default value of 'requires' to () Since we dropped support for the old-style template keywords, we no longer have to distinguish None (old-style) and an empty requirement (new-style).

commit: move sorting of added and removed files list to lower level localrepo.commitctx() has lists of all changed files, as well as lists of added and removed files. The list of all files is unsorted and changelog.add() will sort it. Let's also sort the lists of added and removed files at a lower level (manifestrevlog.add()) for consistency. It also seems safer to do it there, just before we write them to the store. That way other callers won't be able to create invalid commits (or whatever the consequence is) by passing in unsorted lists. Also, alternative storages may not care that the lists are sorted. I don't think this will be a performance problem (someone should have fixed the sorting in changelog.add() if it were). Differential Revision: https://phab.mercurial-scm.org/D6390

match: drop unnecessary adding of '' to set of dirs This breaks some tests for "rootfilesin:" in a pattern matcher even more, but that just shows how broken that case is. Differential Revision: https://phab.mercurial-scm.org/D6406

narrowcommands: drop unnecessary adding of '' for root directory It's now included by util.dirs(). Differential Revision: https://phab.mercurial-scm.org/D6405

copies: remove hack for adding root dir to util.dirs object Differential Revision: https://phab.mercurial-scm.org/D6404

util: make util.dirs() and util.finddirs() include root directory (API) This changes the behavior of test-origbackup-conflict.t so it no longer errors out when the backup path points to an existing file. Instead, it replaces the file by a directory. That seems reasonable to me. Differential Revision: https://phab.mercurial-scm.org/D6403

dirstate: drop workaround for '.' matching root directory The check was added in 31abcae33b4f (dirstate: do not ignore current directory '.' (issue 1078), 2008-04-05) to fix issue1078. Funnily enough, comment #2 on that issue mentions using '' instead of '.' to represent the root directory, just like my previous patch did. test-hgignore.t fails with this patch without the previous patch. Differential Revision: https://phab.mercurial-scm.org/D6402

match: use '' instead of '.' for root directory (API) I think '' is generally a better value for the root directory than '.' is. For example, os.path.join('', 'foo') => 'foo', while os.path.join('.', 'foo') => './foo'. This patch mostly makes it so we use '' internally in match.py. However, it also affects the API in visitdir(), visitchildrenset() and files(). The two former now also accept '' as input. I've updated the callers of these methods. I've also added a deprecation warning for passing '.' (for external callers). The only caller I could find that was affected by files() returning '' instead of '.' was in dirstate.walk(). I've updated that. The next few patches show some workarounds we can remove by using '' instead of '.'. Differential Revision: https://phab.mercurial-scm.org/D6401

dirstate: move special handling of files==['.'] together I think it makes it a little clearer to have the two conditions for files==['.'] near each other. Differential Revision: https://phab.mercurial-scm.org/D6400

convert: don't include file in "files" list if it's added in p2 If the file is from p2, we should clearly compare the flags to what they were in p2. Also note that manifest.flags('non-existent') unfortunately returns '' instead of erroring out. Differential Revision: https://phab.mercurial-scm.org/D6409

convert: demonstrate broken {files} list in merge commits with file flags When there is a merge in which the flags for a file from p2 is non-empty, `hg convert` will incorrectly include that in the changeset's files list. Differential Revision: https://phab.mercurial-scm.org/D6408

templater: drop support for old style keywords (API) These changes originated from several commits over a period of time, so I'm slightly unsure if this is correct. But the tests pass.

commands: drop support for legacy ^cmd registration (API)

extensions: drop support for extsetup() without `ui` argument (API)

relnotes: mention removed support for mixed log graph lines This adds release notes for 264a2cbb25d0 (graphmod: remove support for graph lines mixing parent/grandparent styles (BC), 2018-10-16). Differential Revision: https://phab.mercurial-scm.org/D6407

tests: fix test-clonebundles on recent openbsd I guess openbsd feels like it needs to stringify this errno in lowercase and omit the "host" part of "hostname. Okay. Reported in a big test diff talking about libressl, see 6122. I'm not flagging this because most of that issue is about a libressl string change, so this doesn't really make a big difference there. Differential Revision: https://phab.mercurial-scm.org/D6399

rust-python3: compatibility fix for integer conversion On python3, `to_py_object()` on the usize gives us a PyLong, whereas it is the generic `PyObject` already on python2, which fits the `py.None()` default value. Upcasting to `PyObject` explicitely in all cases solves the issue. Differential Revision: https://phab.mercurial-scm.org/D6396

rust: sort dependencies entries in Cargo.toml I should probably write a test to enforce this... Differential Revision: https://phab.mercurial-scm.org/D6398

py3: make contrib/testparseutil.py to work on str(unicodes) contrib/check-code work on unicodes and call functions from testparseutil.py which before this patch used to work on bytes. This path removes that inconsistency and make testparseutil.py work on unicodes. This makes test-check-code.t and test-contrib-check-code.t work on Python 3 again. Differential Revision: https://phab.mercurial-scm.org/D6391

rust-filepatterns: call new Rust implementations from Python This change adds the import to the `rust-cpython` bindings and uses them when appropriate. A wrapper function has been defined in the case of `_regex` to keep this patch simple. Differential Revision: https://phab.mercurial-scm.org/D6273

rust-filepatterns: add `rust-cpython` bindings for `filepatterns` This change adds the `rust-cpython` interface for top-level functions and exceptions in the filepatterns module. Contrary to the Python implementation, this tries to have finer-grained exceptions to allow for better readability and flow control down the line. Differential Revision: https://phab.mercurial-scm.org/D6272

rust-filepatterns: add a Rust implementation of pattern-related utils This change introduces Rust implementations of two functions related to pattern handling, all located in `match.py`: - `_regex` - `readpatternfile` These utils are useful in the long-term effort to improve `hg status`'s performance using Rust. Experimental work done by Valentin Gatien-Baron shows very promising improvements, but is too different from the current Mercurial core code structure to be used "as-is". This is the first - albeit very small - step towards the code revamp needed down the line. Two dependencies were added: `regex` and `lazy_static`. Both of them will be useful for a majority of the Rust code that will be written, are well known and maintained either by the Rust core team, or by very frequent contributors. Differential Revision: https://phab.mercurial-scm.org/D6271