bugzilla: add modified XMLRPC mode that uses email to send bug comments. If Bugzilla has its email interface configured, an email can be used to update bugs. If the From: address in the email matches a valid user email, Bugzillas make the update as that user. So comments attached to a bug appear under the name of the user making the change, and the user does not receive email about the change, exactly as if they had made the change via the web interface. So add a modified XMLRPC mode that uses email to modify bugs. The format of the mails is documented in the Bugzilla email_in.pl specification. Briefly, initial non-blank lines in the message body starting '@<field> = <value> modify bug fields. A blank line signals the end of the command lines, and the rest of the message is used as bug comment. Invoke the same Mercurial user to Bugzilla user email mapping currently used in the MySQL mode. All other processing - checking the bug numbers, checking user ids, etc. continues to be done via XMLRPC.

bugzilla: add XMLRPC interface. Add support for access to Bugzilla via the XMLRPC interface. This requires a single username and password used to log in to Bugzilla, plus the URL of the Bugzilla installation. Commit messages are added to bugs as before, but security only permits them to be added as the username used to log in.

bugzilla: localise all MySQL direct access inside access class. Prepare for the addition of other Bugzilla access methods by localising direct MySQL database access inside an access class. Provide a base access class largely to document the methods required for a class implementing a particular access method. Rename the 'bugzilla_<version>' classes to 'bzmysql_<version>' to emphasise that they are doing access via direct manipulation of a MySQL database.

bugzilla: keep bug IDs in set. Bug IDs are collected into a set, and then silently converted in filter_real_bug_ids() into a list. For consistency, keep them in a set throughout and update the docstrings to say that.

bugzilla: rename filter_unknown_bug_ids to reflect its actual purpose. The method really removes from the list of bugs any that already have comment text referencing the changeset in question. Rename it to filter_cset_known_bug_ids().

test-paths.t: 'file:' disables [paths] entries for clone dest

hgwebdir: handle IOErrors from localrepo while enumerating Repository() raises a number of IOErrors in addition to RepoErrors. these are just as uninteresting as RepoErrors and should be ignored The easiest case of this is a repo whose .hg/ directory is -rx

set NOT_CONTENT_INDEXED on .hg dir (issue2694) when running on Windows

hgweb: add bookmark labels to monoblue theme (based on 270f57d35525)

merge with stable

convert/mtn: Fix conversion of large files from mtn (broken in ed97955e0c04) "mtn automate stdio" will break output larger than 32kB into several packets. This ensures that we are processing all the output on the main stream and not only the last packet.

mq: fix qselect help for qguard

Fix transplant error message to correspond with test

transplant: fix crash if filter script munges log file This fixes an UnboundLocalError crash if the filter script removes the 'User' or 'Date' lines from the log file.

changegroup: fold linkrev helper into lookup functions

changegroup: fold filenode collector into mlookup

changegroup: roll changegroup.collector into lookup functions

changegroup: add revlog to the group callback

changegroup: move sorting down into group

changegroup: fold progress meter into callbacks progress meters now start at 1 rather than 0

changegroup: combine infocollect and lookup callbacks

changegroup: drop unused fullrev This is unfinished and unused and complicates expanding the wire protocol.

util: dates cannot consist entirely of whitespace (issue2732)

convert/mtn: convert suspended branches as closed branches Monotone treats branch closing ("suspending") in a similar manner to how we do in mercurial - a cert is added to a revision that marks the branch to be hidden. If a subsequent commit is made, the branch is effectively reopened.

rebase: don't mark file as removed if missing in parent's manifest (issue2725)

windows: use win32.unlink in unlinkpath() os.unlink fails to remove files with READONLY attribute

win32: remove READONLY attribute on unlink

windows: move unlink to win32.py no code change

ui: label prompts, default to yellow prompts

record: replace poor man's if-statement with real if-statement

url: use url.url in hidepassword() and removeauth()

subrepos: use url.url when normalizing repo paths This works around an issue in older versions of Python that would strip double slashes from SSH URLs when using urlunparse() on a parsed URL. Related issues: - issue1755: WinXP: cmd line hg 1.3 clone of subrepo fails, due to %5C '\'? (originally fixed by f783bb979fb3).

url: provide url object This adds a url object that re-implements urlsplit() and unsplit(). The implementation splits out usernames, passwords, and ports. The implementation is based on the behavior specified by RFC 2396[1]. However, it is much more forgiving than the RFC's specification; it places no specific restrictions on what characters are allowed in each segment of the URL other than what is necessary to split the URL into its constituent parts. [1]: http://www.ietf.org/rfc/rfc2396.txt

cmdutil: fix mode handling in make_file

revlog: change variable name to avoid reuse

debugstate: add new --datesort option sorts the output lines by mtime, then by filename

rebase: restore mq guards after rebasing (issue2107) Guards on rebased mq patches were lost. This patch restores them after the qimporting step.

tests: no need to explicitly export HOME in test files the test runner ensures that HOME is set to a temp dir

tests: set HOME to the test temp dir (issue2707)

dirstate: eliminate _lastnormal set We can get rid of the _lastnormal set by using the filesystem mtimes to identify the problematic "lastnormal" files on status(), forcing a file content-comparison if the file's mtime timeslot is equal to _lastnormaltime.

test-extdiff: fix 5c0e1222e7c0 temporary dir output

convert/mtn: avoid unnecessary initial test of mtn repo As soon as before() is called, we'll know if there is a problem (and get a better error message).

convert/mtn: add support for using monotone's "automate stdio" when available Currently the convert extension spawns a new mtn process for each operation. For a large repository, this ends up being hundreds of thousands of processes. The following enables usage of monotone's "automate stdio" functionality - documented at: http://www.monotone.ca/docs/Automation.html#index-mtn-automate-stdio-188 The effect is that (after determining that a new enough mtn executable is available) a single long-running mtn process is used for all the operations, using stdin/stdout to send commands and read output. This has a pretty significant effect on the performance of some parts of the conversion process.

convert: add support to common commandline to access stdin of the process

extdiff: use absolute paths for any temporary files This allows the use of p4merge amongst possible other external tools.

convert: add bookmark support to hg source

convert: add bookmarks reading support to git backend

ssh: fix password test We don't support passwords in ssh URLs, and neither do some versions of Python's urllib. Since we don't actually care much here, punt with a glob in the test.

dirstate: check mtime when adding to _lastnormal - consistently use mtime as mapped to dirstate granularity (needed for filesystems like NTFS, which have sub-second resolution) - no need to add files with mtime < _lastnormaltime - improve comments

subrepo: simplify hgsubrepo._get a little

Fix expected url to match test.

patch: deprecate ui.patch / external patcher feature Why? - Mercurial internal patcher works correctly for regular patches and git patches, is much faster at least on Windows and is more extensible. - In theory, the external patcher can be used to handle exotic patch formats. I do not know any and have not heard about any such use in years. - Most patch programs cannot handle git format patches, which makes the API caller to decide either to ignore ui.patch by calling patch.internalpatch() directly, or take the risk of random failures with valid inputs. - One thing a patch program could do Mercurial patcher cannot is applying with --reverse. Apparently several shelve like extensions try to use that, including passing the "reverse" option to Mercurial patcher, which has been removed mid-2009. I never heard anybody complain about that, and would prefer reimplementing it anyway. And from the technical perspective: - The external patcher makes everything harder to maintain and implement. EOL normalization is not implemented, and I would bet file renames, if supported by the patcher, are not correctly recorded in the dirstate. - No tests. How? - Remove related documentation - Clearly mark patch.externalpatch() as private - Remove the debuginstall check. This deprecation request was actually triggered by this last point. debuginstall is the only piece of code patching without a repository. When migrating to an integrated patch() + updatedir() call, this was really a showstopper, all workarounds were either ugly or uselessly complicated to implement. If we do not support external patcher anymore, the debuginstall check is not useful anymore. - Remove patch.externalpatch() after 1.9 release.

# User Dan Villiom Podlaski Christiansen <danchr@gmail.com> # Date 1289564504 -3600 # Node ID b75264c15cc888cf38c3c7b8f619801e3c2589c7 # Parent 89b2e5d940f669e590096c6be70eee61c9172fff revsets: overload the branch() revset to also take a branch name. This should only change semantics in the specific case of a tag/branch conflict where the tag wasn't done on the branch with the same name. Previously, branch(whatever) would resolve to the branch of the tag in that case, whereas now it will resolve to the branch of the name. The previous behaviour, while documented, seemed very counter-intuitive to me. An alternate approach would be to introduce a new revset such as branchname() or namedbranch(). While this would retain backwards compatibility, the distinction between it and branch() would not be readily apparent to users. The most intuitive behaviour would be to have branch(x) require 'x' to be a branch name, and something like branchof(x) or samebranch(x) do what branch(x) currently does. Unfortunately, our backwards compatibility guarantees prevent us from doing that. Please note that while 'hg tag' guards against shadowing a branch, 'hg branch' does not. Besides, even if it did, that wouldn't solve the issue of conversions with such tags and branches...

test-commit-multiple.t: improve committwice.py - fix bug in replacebyte: parameter fn wasn't used (no harm done) - remove unneeded matcher - remove unused local n - increase test coverage a bit with a second file and some sleeping - show files changed in revisions - move print statements out of racy path to make sure it's as racy as possible

osutil: replace #import with #include, and add a check for it

code indentation fixes

convert: add bookmark support to the hg sink

convert: add bookmark support to main command During conversion, read bookmarks from source repo, filter them and push the resulting set of bookmarks to destination sink.

convert: add bookmark support to common sink/source implementation

dirstate: reset _lastnormal and _lastnormaltime on write, invalidate, and clear

discovery: avoid discovery when local graph is a subset of remote Immediately sends local's heads to the server to check whether the server knows them all. If it does, we can call getbundle immediately. Interesting test output changes are: - added 1 changesets with 0 changes to 1 files (+1 heads) + added 1 changesets with 0 changes to 0 files (+1 heads) -> The new getbundle() actually fixes a bug vs. changegroupsubset() in that it no longer returns unnecessary files when file revs are reused. warning: repository is unrelated + requesting all changes -> The new use of common instead of bases correctly indicates that an unrelated pull gets all changes from the server.

wireproto: add getbundle() function getbundle(common, heads) -> bundle Returns the changegroup for all ancestors of heads which are not ancestors of common. For both sets, the heads are included in the set. Intended to eventually supercede changegroupsubset and changegroup. Uses heads of common region to exclude unwanted changesets instead of bases of desired region, which is more useful and easier to implement. Designed to be extensible with new optional arguments (which will have to be guarded by corresponding capabilities).

merge with stable

i18n-pt_BR: synchronized with 6783f47d90dd