dirstate: use future-proof next(iter) instead of iter.next The latter has been removed in Python 3.

posix: tiptoe around tempfile module more delicately Some of the values inside the tempfile calls here are str on Python 3, so we've got to pass str in. Use fsdecode to work around the issue.

posix: use open() instead of file()

revlog: use int instead of long By my reading of PEP 237[0], this is completely safe and has been since Python 2.2. 0: https://www.python.org/dev/peps/pep-0237/

error: use r-string to properly pop hints from **kw Fixes the hint mixin on Python 3.

dispatch: use pycompat.maplist to allow summing with args

pycompat: add maplist alias for old map behavior

dispatch: replace mayberepr with shellquote The quoting logic here was actually insufficient, and would have had bogus b-prefixes on Python 3. shellquote seems more appropriate anyway. Surprisingly, only two tests have output changes, and both of them look reasonable to me (both are in blackbox logs). Spotted by Yuya during review.

color: sync text attributes and buffered text output on Windows (issue5508) I originally noticed that log output wasn't being colored after 3a4c0905f357, but there were other complications too. With a bunch of untracked files, only the first 1K of characters were colored pink, and the rest were normal white. A single modified file at the top would also be colored pink. Line buffering and full buffering are treated as the same thing in Windows [1], meaning the stream is either buffered or not. I can't find any explicit documentation to say stdout is unbuffered by default when attached to a console (but some internet postings indicated that is the case[2]). Therefore, it seems that explicit flushes are better than just not reopening stdout. NB: pager is now on by default, and needs to be disabled to see any color on Windows. [1] https://msdn.microsoft.com/en-us/library/86cebhfs(v=vs.140).aspx [2] https://sourceforge.net/p/mingw/mailman/message/27121137/

test-check-help: fix to work on Windows The initial problem was `hg files` prints paths with '\', which gets removed when piped (scanhelptopics.py failed to open 'hgext__init__.py'). Then, xargs was invoking `hg help` with 'backout\r (esc)', which setting binary mode prevents.

branchmap: be more careful about using %d on ints Not doing so breaks Python 3.

util: use bytes re on bytes input in fspath Fixes `hg add` on Python 3.

util: use pycompat.bytestr in checkwinfilename Fixes `hg add` on python3.

dispatch: ensure repr is bytes in _mayberepr Fixes command line arguments containing spaces on Python 3.

dispatch: extract maybe-use-repr formatting to helper function I think this makes the code much clearer. I had to think for a bit to unpack the old-school `condition and if-true or if-false` dance, and formatting argument lists here shouldn't be performance critical.

dispatch: consolidate formatting of arguments This was getting done twice, and it's clever enough I'm about to split it apart and then fix it for Python 3.

py3: make the regular expression bytes to prevent TypeError

pager: flush outputs before firing pager process So that buffered outputs are always sent to the console.

patchbomb: use modern pager to display -n/--test result (BC) This should provide more consistent UX, but is a BC because the pager will no longer be fired up for each message.

httpconnection: make sure to clear progress of httpsendfile at EOF read() should never raise EOFError. If it did, UnboundLocalError would occur due to unassigned 'ret' variable. This issue was originally reported to TortoiseHg: https://bitbucket.org/tortoisehg/thg/issues/4707/

py3: convert log opts to bytes-key dict Now simple log command works.

graphlog: pass function arguments without expansion It's annoying on Python 3 because keys must be unicode type. Let's stop using **opts expansion when not necessary.

py3: call codecs.escape_decode() directly The same rule as 3b7a6941a6ef applies.

util: wrap s.decode('string_escape') calls for future py3 compatibility

merge with stable

hgwebdir: add support for explicit index files This is useful for when repositories are nested in --web-conf, and in the future with hosted subrepositories. The previous behavior was only to render an index at each virtual directory. There is now an explicit 'index' child for each virtual directory. The name was suggested by Yuya, for consistency with the other method names. Additionally, there is now an explicit 'index' child for every repository directory with a nested repository somewhere below it. This seems more consistent with each virtual directory hosting an index, and more discoverable than to only have an index for a directory that directly hosts a nested repository. I couldn't figure out how to close the loop and provide one in each directory without a deeper nested repository, without blocking a committed 'index' file. Keeping that seems better than rendering an empty index.

ui: move configlist parser to config.py The list parser is complex and reusable without ui. Let's move it to config.py. This allows us to parse a list from a "pure" config object without going through ui. Like, we can make "_trustusers" calculated from raw configs, instead of making sure it's synchronized by calling "fixconfig"s.

tests: allow ModuleNotFoundError in addition to ImportError My environment (Python version? PYTHONPATH? something else?) raises ModuleNotFoundError in test-check-py3-compat.t. This patch allows any "*Error". The error string contains "error importing", so it seems specific enough even after.

pager: skip running the pager if it's set to 'cat' Avoid useless uses of cat.

pager: avoid shell=True on subprocess.Popen for better errors (issue5491) man(1) behaves as poorly as Mercurial without this change. This cribs from git's run-command[0], which has a list of characters that imply a string that needs to be run using 'sh -c'. If none of those characters are present in the command string, we can use shell=False mode on subprocess and get significantly better error messages (see the test) when the pager process is invalid. With a complicated pager command (that contains one of the unsafe characters), we behave as we do today (which is no worse than git manages.) I briefly tried tapdancing in a thread to catch early pager exits, but it's just too perilous: you get races between fd duping operations and a bad pager exiting, and it's too hard to differentiate between a slow-bad-pager result and a fast-human-quit-pager-early result. I've observed some weird variation in exit code handling in the "bad experience" case in test-pager.t: on my Mac hg predictably exits nonzero, but on Linux hg always exits zero in that case. For now, we'll work around it with || true. :( 0: https://github.com/git/git/blob/cddbda4bc87b9d2c985b6749b1cf026b15e2d3e7/run-command.c#L201

py3: change explicit conversion of config value from str to pycompat.bytestr

py3: add __bool__ to every class defining __nonzero__ __nonzero__ was renamed to __bool__ in Python 3. This patch simply aliases __bool__ to __nonzero__ for every class implementing __nonzero__.

merge: also allow 'e' action with experimental.updatecheck=noconflict With experimental.updatecheck=noconflict set, if one checks out f3398f1f70a0 (tests: add execute bit and fix shbang line, 2015-12-22) and then try to check out its parent, hg will complain about conflicting changes, even though the working directory is clean. We need to also allow the 'e' action in merge.py. The 'e' action is used when moving to a commit where the only change to the file is to its executable flag, so it's just an optimized 'g' action. Doesn't seem to be worth writing a test for, since the existing setup in test-update-branches.t does not set any flags.

exchange: use v2 bundles for modern compression engines (issue5506) Previously, `hg bundle zstd` on a non-generaldelta repo would attempt to use a v1 bundle. This would fail because zstd is not supported on v1 bundles. This patch changes the behavior to automatically use a v2 bundle when the user explicitly requests a bundlespec that is a compression engine not supported on v1. If the bundlespec is <engine>-v1, it is still explicitly rejected because that request cannot be fulfilled.

exchange: reject new compression engines for v1 bundles (issue5506) Version 1 bundles only support a fixed set of compression engines. Before this change, we would accept any compression engine for v1 bundles, even those that may not work on v1. This could lead to an error. We define a fixed set of compression engines known to work with v1 bundles and we add checking to ensure a newer engine (like zstd) won't work with v1 bundles. I also took the liberty of adding test coverage for unknown compression names because I noticed we didn't have coverage of it before.

config: honour the trusted flag in ui.configbytes

osutil: fix potential wrong fd close According to POSIX closedir [1]: If a file descriptor is used to implement type DIR, that file descriptor shall be closed. According to POSIX fdopendir [2]: Upon calling closedir() the file descriptor shall be closed. So we should avoid "close(dfd)" after "closedir(dir)". With threads, there could be a race where an innocent fd gets closed. But Python GIL seems to help hiding the issue well. [1]: http://pubs.opengroup.org/onlinepubs/009695399/functions/closedir.html [2]: http://pubs.opengroup.org/onlinepubs/9699919799/functions/fdopendir.html

parsers: use Python memory allocator for indexObject->offsets

parsers: use Python memory allocator in commonancestorsheads()

osutil: use Python memory allocator in _listdir The Python memory allocator has performance advantages for small allocations.

bdiff: use Python memory allocator in fixws Python has its own memory allocation APIs. For allocations <= 512 bytes, it allocates memory from arenas. This means that average small allocations don't call the system allocator, which makes them faster. Also, arena allocations cut down on memory fragmentation, which can matter for performance in long-running processes. Another advantage of using the Python memory allocator is that allocations are tracked by Python. This is a bigger deal in Python 3, as modern versions of Python have some decent built-in tools for examining memory usage, leaks, etc. This patch converts a trivial malloc() + free() in the bdiff code to use the Python allocator APIs. Since the object being operated on is a line, chances are it will use an arena. So, this could have a net positive impact on performance (although I didn't measure it).

localrepo: fix deprecation warning version of wfile The patch lingered a bit too long in my local clone and I messed up when I updated the version number. Since nobody caught it, I'm fixing the version after the fact.

util: explicitly tests for None Changeset 8b6927eb7efd removed the mutable default value, but did not explicitly tested for None. Such implicit checking can introduce semantic and performance issue. We move to an explicit check for None as recommended by PEP8: https://www.python.org/dev/peps/pep-0008/#programming-recommendations

context: simplify call to icase matcher in 'match()' The two function takes the very same arguments. We make this clearer and less error prone by dispatching on the function only and having a single call point in the code.

py3: make sure using bytes status char rather than ascii values 'MAR!?IC' is converted to their ascii values when slicing through it. This patch uses pycompat.iterbytestr() to get bytes value.

shelve: get rid of ui.backupconfig

rebase: get rid of ui.backupconfig

mq: get rid of ui.backupconfig

histedit: get rid of ui.backupconfig

record: get rid of ui.backupconfig

import: get rid of ui.backupconfig

clone: get rid of ui.backupconfig

commit: get rid of ui.backupconfig

branchmap: handle nullrev in setcachedata 906be86990 recently changed to switch from: self._rbcrevs[rbcrevidx:rbcrevidx + _rbcrecsize] = rec to pack_into(_rbcrecfmt, self._rbcrevs, rbcrevidx, node, branchidx) This causes an exception if rbcrevidx is -1 (i.e. the nullrev). The old code handled this because python handles out of bound sets to arrays gracefully. The new code throws because the self._rbcrevs buffer isn't long enough to write 8 bytes to. Normally it would've been resized by the immediately preceding line, but because the 0 length buffer is greater than the idx (-1) times the size, no resize happens. Setting the branch for the nullrev doesn't make sense anyway, so let's skip it. This was caught by external tests in the Facebook extensions repo, but I've added a test here that catches the issue.

py3: call codecs.escape_encode() directly string_escape doesn't exist on Python 3, but fortunately the undocumented codecs.escape_encode() function exists on CPython 2.6, 2.7, 3.5 and PyPy 5.6. So let's use it for now. http://stackoverflow.com/a/23151714

templatekw: make join() escape values of extras (BC) (issue5504) Since extras may contain blob, the default template escapes its values: 'extra': '{key}={value|stringescape}' join() should follow the output style of the default template.

util: wrap s.encode('string_escape') call for future py3 compatibility

py3: prove hg tip works

py3: call strftime() with native str type Since strftime() may contain non-ascii character if locale set, we use strfrom/tolocal(). Now "hg tip" works.

encoding: add converter between native str and byte string This kind of encoding conversion is unavoidable on Python 3.