rhg: correctly relativize copy source path

rhg: don't print copy source when --no-status is passed

tests: add test for status copy source formatting

fix: highlight the required configuration and behavior of the fixer tools The problem is that `hg help fix` didn't mention *how* to configure the tools, and while I knew that `{rootpath}` existed in the configuration, I missed that the tools require reading content from stdin. (I configured `gofmt` to use `{rootpath}`, and that had the effect of squashing all changes in a file at `.` into the first commit and emptying that content from its descendants.) Basically all this does is put a pointer in the default (command level) help to the extension level help that mentions the configuration, and moves the extension level help that documents reading from stdin and writing to stdout to the top to give it more prominence. The last sentence is adjusted a bit to reflect the new location.

debug-delta: add minimal documentation for `devel.bundle-delta` option So the next person won't have to grep the code to know what it is doing.

delta-find: simply code that is now never invoqued without general delta Finish early in on-general delta case mean a lot of code can assume that general delta is not enabled.

delta-find: add a simple safeguard to prevent bad non-general-delta This make it easier to catch request to build delta that does not make sense in the general delta world. It seems better to raise a programming error than to corrupt the repository.

delta-find: never do anything fancy when general delta is off Without general delta, the only option is to do a delta against the previous revision in the revlog, or to do a full snapshot. So no need to dive into the more complicated logic. This prevent Mercurial to misbehave when applying remote deltas when `pulled-delta-reuse-policy` was set to "try-base" or "forced" and would produce and store invalid deltas. We add an associated tests to make sure this scenario is covered by tests. There are more code to cleanup after this, but I what to keep the fixing patch simple.

delta-find: assume the target-rev if not specified This will be useful in the next patch, but I am putting it in its own commit to make sure we can easily bisect any subtle side effect. (none are expected, but still)

chg: set CHGHG before connecting to command server cf4d2f31 (!523) changed chg to set `CHGHG` itself when spawning a new command server, in order to ensure that the path to the `hg` executable would be checked during server validation. (This is useful when chg is built with `HGPATHREL`). However, that change broke chg because it failed to set `CHGHG` before trying to connect to an existing command server. This means that if `CHGHG` is not present in the environment, chg will always spawn a new command server, entirely negating the point of chg. This breakage wasn't initially caught because of the difficulty of writing automated tests with the `HGPATHREL` feature enabled, which meant the change was only tested manually to make sure that it fixed the problem with `HGPATHREL` that prompted the change. In practice, this functionality is only really useful when chg is built with `HGPATHREL`, so I considered wrapping it in an `#ifdef` to preserve the old behavior by default. However, this makes it hard to write tests since one would have to explicitly set `HGPATHREL=1` when running `run-tests.py` (which is why the original change lacked tests). It would be great if there were a way of testing features that are gated behind conditional compilation.

chg: declare environ (issue6812)

relnotes: add 6.4.2

Added signature for changeset f952be90b051

Added tag 6.4.2 for changeset f952be90b051

revlog-split: make sure the self._indexfile attribut is reset (issue6811) Before this change, after a transaction committing a file split, a revlog object would have its `self._indexfile` attribute desynchronised from the actual file storing the data. If that same object is reused (as we do for the manifest during clone bundles), this lead to the data being writting in the wrong location and the repository to go corrupt. We not properly reset the attribut when applicable and everything is back in working order.

revlog-split: also check a case where bundle contains multiple changegroup This case is not affected, we remains in the same transaction. However it seems important to improve the test coverage around these "features". It also helped to assert the scop of the critical bug.

revlog-split: show manifest data loss situation when using clonebundle After the commit of the transaction from applying the clone bundle, changes to the manifest from the subsequent pull would write index data in the wrong file. This lead to data being "lost" after the pull and the repository to be corrupted. We add a test checking this specific scenario. In practice, the issue only affects the manifest but we also test the issue with a file for future proofing things up. See test documentation and failure for details.

Added signature for changeset 83ea6ce48b4f

Added tag 6.4.1 for changeset 83ea6ce48b4f

relnotes: add 6.4.1

sslutil: set context security level for legacy tls testing (issue6760) Current versions of OpenSSL do not allow the use of TLS <1.2 when the library's security level is >=1 (1 being the default on most distributions). Setting the security level in addition to the minimum protocol is therefore necessary for the legacy protocol tests. This is done here ONLY when testing, when: - explicitly setting the cipher string, or - using the "--insecure" flag, or - using the "devel.serverexactprotocol" testing option. See: https://github.com/openssl/openssl/blob/master/NEWS.md#major-changes-between-openssl-30-and-openssl-310-14-mar-2023

configitems: make devel.serverexactprotocol look dangerous Because it is.

rebase: do not cleanup the working copy when --dry-run is used (issue6802) Since we did not touch the working copy, we don't need to clean it up. This will avoid wiping exiting changes out.

rebase: add a test showing that --dry-run wipes working copy changes Eating people's data on --dry-run seems like a bad idea.

match: match explicit file using a set The matcher as all the logic to do quick comparison against explicit patterns, however the pattern matcher was shadowing the code using that set and used the compiled regex pattern in all cases, which is quite slow. We restore the usage of the set based matching to boost performance. Building the regexp is still consuming a large amount of time (actually, the majority of the time), which is still silly. Maybe using re2 would help that, but this is a quest for another adventure. Another path to improve this is to have a pattern type dedicated to match the exact path to a file only (not a directory). This pattern could use the set matching only and be skipped in the regex all together. Benchmarks ========== In the following benchmark we are comparing the `hg cat` and `hg files` run time when matching against all files in the repository. They are run: - without the rust extensions - with the standard python engine (so without re2) Performance improvement in this series -------------------------------------- ###### hg files ############################################################### ### mercurial-2018-08-01-zstd-sparse-revlog ### sorted base-changeset: 0.230092 seconds prev-changeset: 0.230069 seconds this-changeset: 0.211425 seconds (-8.36%) ### mercurial-2018-08-01-zstd-sparse-revlog ### shuffled base-changeset: 0.234235 seconds prev-changeset: 0.231165 seconds (-1.38%) this-changeset: 0.212300 seconds (-9.43%) ### pypy-2018-08-01-zstd-sparse-revlog ### sorted base-changeset: 0.613567 seconds prev-changeset: 0.616799 seconds this-changeset: 0.510852 seconds (-16.82%) ### pypy-2018-08-01-zstd-sparse-revlog ### shuffled base-changeset: 0.801880 seconds prev-changeset: 0.616393 seconds (-23.22%) this-changeset: 0.511903 seconds (-36.23%) ### netbeans-2018-08-01-zstd-sparse-revlog ### sorted base-changeset: 21.541828 seconds prev-changeset: 21.586773 seconds this-changeset: 13.648347 seconds (-36.76%) ### netbeans-2018-08-01-zstd-sparse-revlog ### shuffled base-changeset: 172.759857 seconds prev-changeset: 21.908197 seconds (-87.32%) this-changeset: 13.945110 seconds (-91.93%) ### mozilla-central-2018-08-01-zstd-sparse-revlog ### sorted base-changeset: 62.474221 seconds prev-changeset: 61.279490 seconds (-1.22%) this-changeset: 29.529469 seconds (-52.40%) ### mozilla-central-2018-08-01-zstd-sparse-revlog ### shuffled base-changeset: 1364.180218 seconds prev-changeset: 62.473549 seconds (-95.40%) this-changeset: 30.625249 seconds (-97.75%) ###### hg cat ################################################################# ### mercurial-2018-08-01-zstd-sparse-revlog ### sorted base-changeset: 0.764407 seconds prev-changeset: 0.763883 seconds this-changeset: 0.737326 seconds (-3.68%) ### mercurial-2018-08-01-zstd-sparse-revlog ### shuffled base-changeset: 0.768924 seconds prev-changeset: 0.765848 seconds this-changeset: 0.174d0b seconds (-4.44%) ### pypy-2018-08-01-zstd-sparse-revlog ### sorted base-changeset: 2.065220 seconds prev-changeset: 2.070498 seconds this-changeset: 1.939482 seconds (-6.08%) ### pypy-2018-08-01-zstd-sparse-revlog ### shuffled base-changeset: 2.276388 seconds prev-changeset: 2.069197 seconds (-9.15%) this-changeset: 1.931746 seconds (-15.19%) ### netbeans-2018-08-01-zstd-sparse-revlog ### sorted base-changeset: 40.967983 seconds prev-changeset: 41.392423 seconds this-changeset: 32.181681 seconds (-22.20%) ### netbeans-2018-08-01-zstd-sparse-revlog ### shuffled base-changeset: 216.388709 seconds prev-changeset: 41.648689 seconds (-80.88%) this-changeset: 32.580817 seconds (-85.04%) ### mozilla-central-2018-08-01-zstd-sparse-revlog ### sorted base-changeset: 105.228510 seconds prev-changeset: 103.315670 seconds (-1.23%) this-changeset: 69.416118 seconds (-33.64%) ### mozilla-central-2018-08-01-zstd-sparse-revlog ### shuffled base-changeset: 1448.722784 seconds prev-changeset: 104.369358 seconds (-92.80%) this-changeset: 70.554789 seconds (-95.13%) Different way to list the same data with this revision ------------------------------------------------------ ###### hg files ############################################################### ### mercurial-2018-08-01-zstd-sparse-revlog root: 0.119182 seconds glob: 0.120697 seconds (+1.27%) sorted: 0.211425 seconds (+77.40%) shuffled: 0.212300 seconds (+78.13%) ### pypy-2018-08-01-zstd-sparse-revlog root: 0.121986 seconds glob: 0.124822 seconds (+2.32%) sorted: 0.510852 seconds (+318.78%) shuffled: 0.511903 seconds (+319.64%) ### netbeans-2018-08-01-zstd-sparse-revlog root: 0.173984 seconds glob: 0.227203 seconds (+30.59%) sorted: 13.648347 seconds (+7744.59%) shuffled: 13.945110 seconds (+7915.16%) ### mozilla-central-2018-08-01-zstd-sparse-revlog root: 0.366463 seconds glob: 0.491030 seconds (+33.99%) sorted: 29.529469 seconds (+7957.96%) shuffled: 30.625249 seconds (+8256.97%) ###### hg cat ################################################################# ### mercurial-2018-08-01-zstd-sparse-revlog glob: 0.647471 seconds root: 0.643120 seconds shuffled: 0.174d0b seconds (+13.92%) sorted: 0.737326 seconds (+13.88%) ### mozilla-central-2018-08-01-zstd-sparse-revlog glob: 40.596983 seconds root: 40.129136 seconds shuffled: 70.554789 seconds (+73.79%) sorted: 69.416118 seconds (+70.99%) ### netbeans-2018-08-01-zstd-sparse-revlog glob: 18.777924 seconds root: 18.613905 seconds shuffled: 32.580817 seconds (+73.51%) sorted: 32.181681 seconds (+71.38%) ### pypy-2018-08-01-zstd-sparse-revlog glob: 1.555319 seconds root: 1.536534 seconds shuffled: 1.931746 seconds (+24.20%) sorted: 1.939482 seconds (+24.70%)

match: sort patterns before compiling them into a regex While investigating cripping performance for `hg cat` in some context, I discovered that, for large inputs, building a regex from out of order patterns result may result in a *much* slower regex and a much slower associated matcher's performance. So we are now sorting the patterns to help the regex engine. There is more to the story as we rely on regexp more than we should. See the next changeset for details. Benchmarks ========== In the following benchmark we are comparing the `hg cat` and `hg files` run time when matching against the full list of files in the repository. They are run: - without the rust extensions - with the standard python enfine (so without re2) sort vs non-sorted - Before this changeset (3f5137543773) --------------------------------------------------------- ###### hg files ############################################################### ### mercurial-2018-08-01-zstd-sparse-revlog sorted: 0.230092 seconds shuffled: 0.234235 seconds (+1.80%) ### pypy-2018-08-01-zstd-sparse-revlog sorted: 0.613567 seconds shuffled: 0.801880 seconds (+30.69%) ### mozilla-central-2018-08-01-zstd-sparse-revlog sorted: 62.474221 seconds shuffled: 1364.180218 seconds (+2083.59%) ### netbeans-2018-08-01-zstd-sparse-revlog sorted: 21.541828 seconds shuffled: 172.759857 seconds (+701.97%) ###### hg cat ################################################################# ### mercurial-2018-08-01-zstd-sparse-revlog sorted: 0.764407 seconds shuffled: 0.768924 seconds ### pypy-2018-08-01-zstd-sparse-revlog sorted: 2.065220 seconds shuffled: 2.276388 seconds (+10.22%) ### netbeans-2018-08-01-zstd-sparse-revlog sorted: 40.967983 seconds shuffled: 216.388709 seconds (+428.19%) ### mozilla-central-2018-08-01-zstd-sparse-revlog sorted: 105.228510 seconds shuffled: 1448.722784 seconds (+1276.74%) sort vs non-sorted - With this changeset ---------------------------------------- ###### hg files ############################################################### ### mercurial-2018-08-01-zstd-sparse-revlog all-list-pattern-sorted: 0.230069 all-list-pattern-shuffled: 0.231165 ### pypy-2018-08-01-zstd-sparse-revlog all-list-pattern-sorted: 0.616799 all-list-pattern-shuffled: 0.616393 ### netbeans-2018-08-01-zstd-sparse-revlog all-list-pattern-sorted: 21.586773 all-list-pattern-shuffled: 21.908197 ### mozilla-central-2018-08-01-zstd-sparse-revlog all-list-pattern-sorted: 61.279490 all-list-pattern-shuffled: 62.473549 ###### hg cat ################################################################# ### mercurial-2018-08-01-zstd-sparse-revlog sorted: 0.763883 seconds shuffled: 0.765848 seconds ### pypy-2018-08-01-zstd-sparse-revlog sorted: 2.070498 seconds shuffled: 2.069197 seconds ### netbeans-2018-08-01-zstd-sparse-revlog sorted: 41.392423 seconds shuffled: 41.648689 seconds ### mozilla-central-2018-08-01-zstd-sparse-revlog sorted: 103.315670 seconds shuffled: 104.369358 seconds

chg: populate CHGHG if not set Normally, chg determines which `hg` executable to use by first consulting the `$CHGHG` and `$HG` environment variables, and if neither are present defaults to the `hg` found in the user's `$PATH`. If built with the `HGPATHREL` compiler flag, chg will instead assume that there exists an `hg` executable in the same directory as the `chg` binary and attempt to use that. This can cause problems in situations where there are multiple actively-used Mercurial installations on the same system. When a `chg` client connects to a running command server, the server process performs some basic validation to determine whether a new command server needs to be spawned. These checks include things like checking certain "sensitive" environment variables and config sections, as well as checking whether the mtime of the extensions, hg's `__version__.py` module, and the Python interpreter have changed. Crucially, the command server doesn't explicitly check whether the executable it is running from matches the executable that the `chg` client would have otherwise invoked had there been no existing command server process. Without `HGPATHREL`, this still gets implicitly checked during the validation step, because the only way to specify an alternate hg executable (apart from `$PATH`) is via the `$CHGHG` and `$HG` environment variables, both of which are checked. With `HGPATHREL`, however, the command server has no way of knowing which hg executable the client would have run. This means that a client located at `/version_B/bin/chg` will happily connect to a command server running `/version_A/bin/hg` instead of `/version_B/bin/hg` as expected. A simple solution is to have the client set `$CHGHG` itself, which then allows the command server's environment validation to work as intended. I have tested this manually using two locally built hg installations and it seems to work with no ill effects. That said, I'm not sure how to write an automated test for this since the `chg` available to the tests isn't even built with the `HGPATHREL` compiler flag to begin with.

run-tests: remove obsolete coverage check and packaging import (issue6805) This removes an obsolete `coverage` version check (version from a decade ago). This also conveniently removes the dependency over `packaging.version`, which requires some additional installation since Python 3.10.

test-tx-rollback: more lenient glob for kill status (issue6807) The "killed" message may have some prefix and/or suffix which differ depending on the platform. This makes the pinned test output more lenient to accept those.

commands: correct documentation of hg serve’s --ipv6 option When the --ipv6 option is given, the server doesn’t listen to a IPv4 socket. This can be verified by running two servers, one with and one without the option, which works fine. I think that listening to both a IPv4 and a IPv6 socket would be better, but given that the Python standard library class underlying the HTTP server supports only one socket, this is not trivial.

rhg: don't crash on empty directory names in path_encode, just in case I don't expect that to be possible, but there's nothing in path_encode.rs that prevents it, and the old code didn't crash in this case, so it's better to be defensive.

rhg: fix a bug in path encoding, demonstrated in the parent commit

rhg: show a bug in the rust implementation of path_encode introduced recently In commit 96d31efd21f7 I did a refactoring where I dropped a chunk of code by accident, thus introducing a bug. This commit adds a test demonstrating that bug.

typing: correct the signature of error.CommandError There's a place in `mercurial.dispatch._parse()` that passes None if a parse error happens before the command can be parsed out, and casting the error to bytes works fine because the command and message fields are apparently ignored. Likewise, TortoiseHg similarly passes None for the same reason.

Added signature for changeset f14864fffdca

Added tag 6.4 for changeset f14864fffdca

relnotes: do 6.4

hooks: invalidate the repo after the hooks Since the hooks may have changed the repository content it seems safer to invalidate it. The invalidation is "soft", the data are kept around and few work will be needed to restore them if nothing actually changed.

dirstate: try refreshing the changelog when parent are unknown See inline comment for details.

localrepo: add a `currentlock` method It mirrors he `currentwlock` function.

dirstate: add a test to highlight another changelog / dirstate race

rust: fix thread cap (for real this time) Both e2f8ed37201c and c52435820bbd failed to put a *default* ceiling on the number of threads used by Rayon to prevent a contention issue. Calling `rayon::available_parallelism()` creates the global threadpool, which made our whole dance useless last time.

tests: accept a test output change in [tests/test-serve.t] This fixes a breakage introduced in adecb1ab4a0d. It was not caught by the CI probably because allows binding to port 13.

py3: fix for Python 3.12 emitting SyntaxWarning on invalid escape sequences Missed in 805d4a462abb: $ python3.12 mercurial/store.py mercurial/store.py:406: SyntaxWarning: invalid escape sequence '\.' EXCLUDED = re.compile(b'.*undo\.[^/]+\.(nd?|i)$')

url: don't ignore timeout for https connections For http, we use the stdlib's HTTPConnection.connect which passes the timeout down to socket.create_connection; for https, we override the connect method but weren't handling the timeout, so connections could hang for hours even with http.timeout set to low values.

debugdeltachain: stop summing the same chain over and over Before this patch, delta chain size was computed from scratch for each chain, disregarding the fact very likely already computed the same of length-1 prefix for another revisions. We not cache delta chain size and shortcut the computation when we see them. Just for my mercurial-devel clone, this move the computation from about 17.5 second to about 4.8 seconds.

revlog: improve the robustness of the splitting process The previous "in-place" splitting, preserving the splitting on transaction failure had a couple of issue in case of transaction rollback: - a race windows that could still lead to a crash and data loss - it corrupted the `fncache`. So instead, we use a new approach that we summarized as "we do a backup of the inline revlog pre-split, and we restore this in case of failure". To make readers live easier, we don't overwrite the inline index file until transaction finalization. (once the transaction get into its finalization phase, it is not expected to rollback, unless some crash happens). To do so, we write the index of the split index in a temporary file that we use until transaction finalization. We also keep a backup of the initial inline file to be able to rollback the split if needed. As a result, transaction rollback cancel the split and no longer corrupt fncache. We also no longer have a small inconsistency windows where the transaction could be unrecoverable.

fncache: make it possible to ignore some file In the next changeset, we need to able to ignore some temporary file. This changeset teach the fncache about that.

revlog: test that pending hooks properly see the repository on split This seems important to explicitly cover this case before changing the code.

revlog: test possible read race condition with splitting This is currently working fine, but could break with another approach (for example, with the one we are about to use in the next changesets…) So we make sure the case is covered.

revlog: add a failing variant of the the split + transaction test We have another variant to tests, and it is crashing… So lets cover it with tests.

revlog: update the split + transaction test We add section, increase the amount of comments and simplify some of the constructs. We are about to build more on top this tests so lets do a small cleanup first.

transaction: allow to backup file that already have an offset This will be useful in the next changeset to deal with rolling back the split of inline revlog on transaction failure. This involve deeper change to the transaction logic as we need to make sure we restore the backup -before- the truncation step. Otherwise, the truncation would act on the wrong file and be overwritten by the backup restoration later.

transaction: move the restoration of backup file in a small closure We are about to use that logic in two different location, making is a small reusable closure prepares that.

transaction: raise on backup restoration error A few line above, similar errors in the truncation code result in raising the associated exception. We should do the same here. This means the transaction recover is more strict now, which might be a problem when running `hg recover` in a share different from the one where the transaction fails. However this has always been a problem and need to be be addressed independently.

transaction: add clarifying comment about why ignoring some error is fine It is less scary when explained.

transaction: properly clean up backup file outside of .hg/store/ Oops.

statprof: with Python 3.12, lineno is (more) often None test-profile.t failed with errors like: TypeError: %d format: a real number is required, not NoneType statprof.py already handled None values as -1 in some cases. Do the same in more cases.

py3: fix for Python 3.12 emitting SyntaxWarning on invalid escape sequences Mercurial became very noisy after https://github.com/python/cpython/commit/a60ddd31be7ff96a8189e7483bf1eb2071d2bddf , for example: $ python3.12 mercurial/store.py mercurial/store.py:406: SyntaxWarning: invalid escape sequence '\.' EXCLUDED = re.compile(b'.*undo\.[^/]+\.(nd?|i)$') This verbosity made some tests fail. The problems were mostly insufficiently escaped regexps, relying on the Python parser/scanner preserving invalid escape sequences.

cext: fix for PyLong refactoring in CPython 3.12 Compiling Mercurial with Python 3.12 a5 would fail with: mercurial/cext/dirs.c: In function '_addpath': mercurial/cext/dirs.c:19:44: error: 'PyLongObject' {aka 'struct _longobject'} has no member named 'ob_digit' 19 | #define PYLONG_VALUE(o) ((PyLongObject *)o)->ob_digit[0] | ^~ mercurial/cext/dirs.c:97:25: note: in expansion of macro 'PYLONG_VALUE' 97 | PYLONG_VALUE(val) += 1; | ^~~~~~~~~~~~ mercurial/cext/dirs.c:19:44: error: 'PyLongObject' {aka 'struct _longobject'} has no member named 'ob_digit' 19 | #define PYLONG_VALUE(o) ((PyLongObject *)o)->ob_digit[0] | ^~ mercurial/cext/dirs.c:108:17: note: in expansion of macro 'PYLONG_VALUE' 108 | PYLONG_VALUE(val) = 1; | ^~~~~~~~~~~~ mercurial/cext/dirs.c: In function '_delpath': mercurial/cext/dirs.c:19:44: error: 'PyLongObject' {aka 'struct _longobject'} has no member named 'ob_digit' 19 | #define PYLONG_VALUE(o) ((PyLongObject *)o)->ob_digit[0] | ^~ mercurial/cext/dirs.c:145:23: note: in expansion of macro 'PYLONG_VALUE' 145 | if (--PYLONG_VALUE(val) <= 0) { | ^~~~~~~~~~~~ This was caused by https://github.com/python/cpython/commit/c1b1f51cd1632f0b77dacd43092fb44ed5e053a9 .