storageutil: match node length with repository

dirstate: enforce holding the lock while doing any changes This seems like a sensible sanity check. This already caught the issue in largefile. This will catch more issue when we start using similar context manager for operation other than the parent changes.

largefile: make sure we hold the lock when updating the second dirstate The largefile extension uses a second dirstate file (and object) to track some states. In some situations, it is lazily updated when needed. These operations might not have the lock taken. This means they might conflict and race with other ongoing operations. So we now take the lock to do these operations. This was caught by the next commit.

dirstate: rename `@requires_no_parents_change` too This match the rename of the context manager.

dirstate: rename `@requires_parents_change` to `@requires_changing_parents` This match the rename of the context manager.

dirstate: write dirstate on successful exit of changing_parents context This is the first step toward having more sensible and predicatable write patterns for the dirstate. Having better write/rollback patterns will greatly reduce and clarify the needs to backup the dirstate.

dirstate: rename parentchange to changing_parents Since the new argument breaks the API anyway, we can rename it to a better name. The previous name `parentchange` might be seen as something active, a function that would directly change the parents, however this is just a context manager to frame the operation that will change the parents and adjust the dirstate content accordingly. In addition, the future sister method that will be about changes to tracking and files would have a hard time fitting in the same naming scheme in a clear way. The new naming uses a clear prefix will make it more distinct from other dirstate methods and easier to extend with other similar contexts.

dirstate: pass the repo to the `changeparent` method If we want the context to be responsible for writing (and we want it), we need to have access to a localrepository object. So we now requires a localrepository object as an argument to this context manager.

dirstate: warn about non-explicitly rolledback parent-change Now that the invalidation is dealt with by the context manager itself, we should no longer need this in the unlocking code. We start with issuing a warning if this is the case before actually dropping this code later.

dirstate: invalidate changes when parent-change fails When an error occurs during changing parents, we should invalidate all dirstate modifications and reload the dirstate. This is currently done by a `unlock` callback on the `wlock`. To fix this anomaly, we start dealing with the error directly in the context manager and its potential nesting. The "hard" part is to make sure that, when the parent-change context are nested, we and higher level nesting do not continue to use the invalidated dirstate. We introduce dedicated code to enforce that.

setup: Ensure target directory exists with building rust extension When the rust extension is the first to be build, the target directory may not exist so the copy fails.

filemerge: add union-other-first as internal merge tool See inline documentation for details.

rust-narrow: fix loop that never loops This was caught by `clippy`. I guess the narrow tests leave something to be desired, since this previously only checked the first valid pattern.

rust: use `peek_mut` from the standard lib now that it's stable Just a little cleanup of a TODO found along the way.

hghave: refactor checks for pygments versions using checkvers()

hghave: make different has_pyoxidizer functions have different names There are 3 of them, and them all having the same name triggered code checkers.

tests: pygments 2.14+ highlight whitespace in python code

tests: make sure pygments can detect python script without extension This .t file was failing for me when running run-tests.py with python3.11. Then I tried to run it with python3.10 and it failed anyway, even though it's the default python3 interpreter. But with `python3 ./run-tests.py` it worked fine. And this is what I found while looking at the way pygments lexer checks if a file without extension is likely to be a python script: shebang_matches(text, r'pythonw?(3(\.\d)?)?') Take guess why it doesn't work for python >= 3.10. To work around this issue, we can simply hardcode an "easier" shebang for pygments. This path to python interpreter obviously doesn't need to be accurate, since we're not running this script.

clippy: actually fail if there are any warnings So far, only errors would trip the CI, this makes it so all warnings are elevated to errors, making it a CI fail if any warnings are present. This was the intended behavior, I just missed this when adding clippy.

rust-clippy: fix warning about nested ifs

convert: brz 3.3.0 moved NoSuchFile exception to breezy.transport

revset: the `random` sort should not depend on sys.maxsize (issue6770)

contrib: adjust heptapod CI flavor sizes Our CI currently runs on a number of different runners, some of which are run by Clever Cloud. By setting this environement variable, we're asking for a smaller size runner for our smaller jobs, which puts less load on the Clever Cloud infrastructure, while not affecting our overall pipeline times.

debugshell: allow commands to be specified as a CLI argument Add a `--command` option to `hg debugshell` that allows the user to pass in Python code to evaluate directly from the command line. This was inspired by the `--command` option present in Facebook's Sapling fork of Mercurial, which in turn was inspired by the `-c` option of the Python interpreter itself. It is particularly useful for writing tests, especially for getting visibility into things that otherwise aren't exposed via debug commands.

resourceutil: start using importlib.resources.files() when possible This avoids DeprecationWarnings related to our use of resources.open_binary() on Python 3.11.

tests: fix a typo in test-demandimport.t I guess we figured out why it wasn't lazy.

tests: os module is frozen in Python 3.11 (issue6786)

heptapod-ci: add `clippy` to the CI This linter mostly makes our code more idiomatic, less surprising, has good suggestions and catches bugs. It's widely used in the Rust community and now part of the default toolchain when using `rustup`.

makefile: add `cargo clippy` to tests if cargo is available This linter mostly makes our code more idiomatic, less surprising, has good suggestions and catches bugs. It's widely used in the Rust community and now part of the default toolchain when using `rustup`.

rust-tests: run `cargo` tests inside the `rust` folder There is no reason to only run inside the `rust/hg-cpython` folder, even if the `cargo test --all` behavior ends up being the same.

rust-clippy: merge "revlog" module definition and struct implementation Module inception is confusing when looking for code and almost never the right choice.

rust-clippy: merge "config" module definition and struct implementation Module inception is confusing when looking for code and almost never the right choice.

rust-clippy: upgrade `bytes-cast` dependency I released a new version of `bytes-cast` to get rid of the clippy warning, and bump to edition 2021, so let's use it.

rust-clippy: remove redundant suffix from enum Same as last time, this makes the code clearer in this instance.

rust-clippy: fix remaining warnings in `hg-cpython`

rust-clippy: disable some lints crate-wide for `hg-cpython` `rust-cpython` creates some pretty funky code that also needs to be compatible with pretty old Rust. This makes clippy quite useless in `hg-cpython` unless you disable the lints that are always triggered by `py_class!` and related. Maybe `clippy` will allow one day to exclude a dependency from its linting, but this seems quite unlikely, so this is the best we've got at the moment.

rust-clippy: fix remaining warnings in `rhg` All of these are simple changes that for the most part are clear improvements and the rest are at most equivalent.

rust-clippy: fix most warnings in `hg-core` All of these are simple changes that for the most part are clear improvements and the rest are at most equivalent. The remaining warnings have to be fixed either with a bigger refactor like for the nested "revlog" module, or in the dependency `bytes-cast`, which we own. This will be done sometime in the future.

rust-utils: strip redundant prefix from enum This was highlighted by `clippy`, I think this makes the code cleaner.

rust-filepatterns: don't `Box` subincludes unnecessarily This was caught by `clippy`.

rust-nodemap: implement `PartialEq` without allocation This was caught by `clippy`. It's probable that this ends up optimized out by the compiler, but let's not rely on that.

rust-clippy: tell `clippy` we don't need to declare a default here This is a struct only useful for tests.

rust-clippy: refactor complex type This makes reading the signature a bit less tiring.

rust-clippy: simplify return type of debug function This makes the type a little bit more readable.

rust-clippy: add `is_empty` method to please the `clippy` gods I can see it being useful anyway.

rust: don't use a reference to a `Cow` This was caught by `clippy`.

rust-clippy: reassure `clippy` that 8 arguments is expected This API is a bit verbose, but refactoring it into a struct isn't better in this particular case IMO, and there is a lot of info to pass.

rust-clippy: use `write_all` since we're not expecting a partial write Clippy caught this. This is a good lint in general, but here this was not really a bug in this example code.

rust-clippy: tell clippy we want to keep those clauses separate This makes the cases more explicit, which is wanted in this specific instance.

rust-clippy: tell clippy we care about keeping those `if` clauses separate Thses were written this way because it spells out the logic in a more explicit manner.

rust-clippy: factor an `if` with the same duplicated clause Unlike the next changeset, this if is not really made clearer by keeping the cases separate.

rust: fix broken debug assertions These were caught by `clippy`. It appears no one uses the debug builds, which is how this wasn't caught before.

rust-narrow: fix loop that never loops This was caught by `clippy`. I guess the narrow tests leave something to be desired, since this previously only checked the first valid pattern.

rust: run `cargo clippy` These automatic fixes are good to have because they make the code more idiomatic and less surprising. The transform from `sort` -> `sort_unstable` is questionable, but this is only in a test, so it doesn't matter in our case.

rust: use `logging_timer` instead of `micro_timer` I am the author of `micro_timer`. I built it at the time because I couldn't find a crate that was simple to use and flexible to do function timing with. Turns out I just couldn't find it because crates.io's search isn't all that great, or maybe I didn't look hard enough. `logging_timer` is better in every way: - supports changing the logging level - supports start and end logging - supports intermediary messages - supports inline macros - supports formatting the output - better IDE/tree-sitter integration thanks to a more robust proc macro I also changed all uses to one-liners, so it's easier to copy-paste.

pathauditor: make _checkfs_exists a static method This fixes the bug detected by pytype where the auditor used in vfs.py may be a no-op auditor (vfs.py, line 398), which doesn't have the _checkfs_exists method.