buildrpm: do not break in presence of custom user configs For example, if "hg log" was defined as an alias: # /etc/mercurial/hgrc [alias] log = log --graph the buildrpm script would be surprised by log messages formatted in unexpected ways, and bail out. This patch sets HGPLAIN, effectively resetting all the user configs, including log output, to a common state, making the build more predictable across all the possible environments.

sparse: treat paths as cwd-relative This commit makes it so sparse treats passed paths as CWD-relative, not repo-root-realive. This is a more intuitive behavior in my (and some other FB people's) opinion. This is breaking change however. My hope here is that since sparse is experimental, it's ok to introduce BCs. The reason (glob)s are needed in the test is this: in these two cases we do not supply path together with slashes, but `os.path.join` adds them, which means that under Windows they can be backslashes. To demonstrate this behavior, one could remove the (glob)s and run `./run-tests.py test-sparse.t` from MinGW's terminal on Windows.

match: expose some data and functionality to other modules This patch makes sure that other modules can check whether patterns are CWD-relative.

sparse: properly error out when absolute paths are used Current logic is misleading (it says it drops only absolute paths, but it actually drops all of them), not cross-platform (does not support Windows) and IMO just wrong (as it should just error out if absolute paths are given). This commit fixes it.

py3: convert arbitrary exception object to byte string more reliably Our exception types implement __bytes__(), which should be tried first. Do lossy encoding conversion as a last resort.

build: delay version computation on macOS builds The way HGVER is evaluated now, it'll be evaluated at the beginning of the make execution - with this change, it's evaluated when it gets to that command, at which point the version file it's looking for is sure to exist and be up-to-date. Differential Revision: https://phab.mercurial-scm.org/D224

color: remove warnings if term is not formatted (==dumb or !ui.formatted()) If the user sets color.mode=terminfo, and then runs in the shell inside of emacs (so TERM=dumb), the previous behavior was that it would warn about no terminfo entry for setab/setaf, and then warn about 'failed to set color mode to terminfo'. The first warning is silenced by carrying 'formatted' through to _terminfosetup, the second is silenced by using 'formatted' instead of ui.formatted(). If --color=on (or ui.color=always) is specified, this will still warn, since the formatted boolean is set to true in these cases. Differential Revision: https://phab.mercurial-scm.org/D223

rpms: add chg I'm not sure if there's a reason chg is not added by default. If not, I would like to propose adding in this patch. Differential Revision: https://phab.mercurial-scm.org/D220

tests: demonstrate crash when trying to rebase merge without its parents As the test case shows, when "hg rebase -d G -r 'B + D + F'" is run on the following graph, we crash with traceback. It's reasonable to fail because we can not easily produce a correct rebased F. The problem is what diff to apply to either the rebased B or the rebased D. We could potentially produce the result by e.g. applying the (F-D) diff to the rebased B and then applying the reverse (E-D) diff on top, but that could result in merge conflicts in each of those steps, which we don't have a way of dealing with. So for now, let's just add a test case to demonstrate that we crash (i.e. the AssertionError is clearly incorrect since the user can run into it). F /| C E | | B D G \|/ A Differential Revision: https://phab.mercurial-scm.org/D212

tests: demonstrate broken rebase of merge with p1's successor in dest The fix in 8ede973597fd (rebase: handle successor targets (issue5198), 2016-04-11) only fixed the case where p2's successor was in the destination, and only when the successor was exactly the destination (i.e. not when the successor was an ancestor of it). This patch adds a test case for when p1's successor is in the destination. It adds another one for when the successor is an ancestor of the destination. To do that simply, it also rewrites the test case using drawdag. Differential Revision: https://phab.mercurial-scm.org/D211

bundle2: obtain repr() of exception in a python3-safe way This was exposed by other problems in bundle generation, but I'm not sure how to test it for now.

bundle2: use bytestr() instead of str() to convert part id to bytes This was exposed by trying to run previously-passing Python 3 tests.

bundle2: work around zip() being lazy in Python 3

bundle2: look for __next__ as well as next to identify iterators In Python 3, next is called __next__ and this was failing to catch some iterators.

bundle2: use modern Python division This was failing on Python 3 because the / was returning a float, which was then making the __mul__ on a bytes sad.

changegroup: wrap some ** expansions in strkwargs

obsolete: reuse _fm1metapair for computing _fm1metapairsize It's evaluated at import time, so it seems silly to not reuse the constant name.

setup: fix installing in a mingw environment The addition, in 9a4adc76c88a, of a hack for the MSVC compiler class was overwriting the original class for the Mingw32CCompiler class, leading to an error when the HackedMingw32CCompiler is instantiated. Differential Revision: https://phab.mercurial-scm.org/D329

osx: delay version computation on macOS builds Before this patch, HGVER would be evaluated at the beginning of the make execution, and would be unset because build/mercurial/ doesn't exist yet at that point. Now we compute the version after the `make install` run has completed. This is backported to stable from 8626b44516c1, but that revision had an error in the shell invocation syntax.

evolution: rename unstable to orphan Rename unstable to orphan in all external user-facing output. Only update user-facing output for the moment, variables names, templates keyword and potentially configuration would be done in later series. The renaming is done according to https://www.mercurial-scm.org/wiki/CEDVocabulary. Differential Revision: https://phab.mercurial-scm.org/D214

evolution: rename trouble(s) to instability Rename trouble(s) to instability in all external user-facing output. Only update user-facing output for the moment, variables names, templates keyword and potentially configuration would be done in later series. The renaming is done according to https://www.mercurial-scm.org/wiki/CEDVocabulary. Differential Revision: https://phab.mercurial-scm.org/D213

bundle2: load hookargs from bundleoperation into transaction when started one When a transaction is started, we must load the hookargs from the bundleoperation object to the transaction so that they can be used in the transaction. Also this patch makes sure no more hookargs are added to the bundleoperation object once the transaction starts. This is a part of porting fb extension bundle2hooks to core. Differential Revision: https://phab.mercurial-scm.org/D209

bundle2: add the capability to store hookargs on bundle operation object There are extensions like pushrebase, pushvars which run hooks on a server before taking the lock. Since the lock is not taken, transaction is not there, so the hookargs can't be stored on the transaction. Adding hooksargs to bundle operation object will help in running hooks before taking the lock. This is a part of moving fb's extension bundle2hooks to core. Differential Revision: https://phab.mercurial-scm.org/D208

branchmap: revert c34532365b38 for Python 2.7 compatibility Old versions of python 2.7 don't like that the second argument to struct.unpack_from is a bytearray, so the change removing the util.buffer around that argument in branchmap broke running on older versions of python 2.7. Differential Revision: https://phab.mercurial-scm.org/D330

Added signature for changeset 3fee7f7d2da0

Added tag 4.3.1 for changeset 3fee7f7d2da0

ssh: unban the use of pipe character in user@host:port string This vulnerability was fixed by the previous patch and there were more ways to exploit than using '|shellcmd'. So it doesn't make sense to reject only pipe character. Test cases are updated to actually try to exploit the bug. As the SSH bridge of git/svn subrepos are not managed by our code, the tests for non-hg subrepos are just removed. This may be folded into the original patches.

ssh: quote parameters using shellquote (SEC) This patch uses shellquote to quote ssh parameters more strictly to avoid shell injection.

subrepo: add tests for git rogue ssh urls (SEC) 'ssh://' has an exploit that will pass the url blindly to the ssh command, allowing a malicious person to have a subrepo with '-oProxyCommand' which could run arbitrary code on a user's machine. In addition, at least on Windows, a pipe '|' is able to execute arbitrary commands. When this happens, let's throw a big abort into the user's face so that they can inspect what's going on.

subrepo: add tests for svn rogue ssh urls (SEC) 'ssh://' has an exploit that will pass the url blindly to the ssh command, allowing a malicious person to have a subrepo with '-oProxyCommand' which could run arbitrary code on a user's machine. In addition, at least on Windows, a pipe '|' is able to execute arbitrary commands. When this happens, let's throw a big abort into the user's face so that they can inspect what's going on.

subrepo: add tests for hg rogue ssh urls (SEC) 'ssh://' has an exploit that will pass the url blindly to the ssh command, allowing a malicious person to have a subrepo with '-oProxyCommand' which could run arbitrary code on a user's machine. In addition, at least on Windows, a pipe '|' is able to execute arbitrary commands. When this happens, let's throw a big abort into the user's face so that they can inspect what's going on.

push: add tests for unsafe ssh url (SEC)

pull: add tests for unsafe ssh url (SEC)

clone: add tests for unsafe ssh url (SEC)

sshpeer: check for safe ssh url (SEC) Checking in the sshpeer for a rogue ssh:// urls seems like the right place to do it (instead of whack-a-mole with pull, clone, push, etc).

ssh: ban any username@host or host that starts with - (SEC) This paranoia probably isn't required, but it can't hurt either.

util: add utility method to check for bad ssh urls (SEC) Our use of SSH has an exploit that will parse the first part of an url blindly as a hostname. Prior to this set of security patches, a url with '-oProxyCommand' could run arbitrary code on a user's machine. In addition, at least on Windows, a pipe '|' can be abused to execute arbitrary commands in a similar fashion. We defend against this by checking ssh:// URLs and looking for a hostname that starts with a - or contains a |. When this happens, let's throw a big abort into the user's face so that they can inspect what's going on.

pathauditor: disable cache of audited paths by default (issue5628) The initial attempt was to discard cache when appropriate, but it appears to be error prone. We had to carefully inspect all places where audit() is called e.g. without actually updating filesystem, before removing files and directories, etc. So, this patch disables the cache of audited paths by default, and enables it only for the following cases: - short-lived auditor objects - repo.vfs, repo.svfs, and repo.cachevfs, which are managed directories and considered sort of append-only (a file/directory would never be replaced with a symlink) There would be more cacheable vfs objects (e.g. mq.queue.opener), but I decided not to inspect all of them in this patch. We can make them cached later. Benchmark result: - using old clone of http://selenic.com/repo/linux-2.6/ (38319 files) - on tmpfs - run HGRCPATH=/dev/null hg up -q --time tip && hg up -q null - try 4 times and take the last three results original: real 7.480 secs (user 1.140+22.760 sys 0.150+1.690) real 8.010 secs (user 1.070+22.280 sys 0.170+2.120) real 7.470 secs (user 1.120+22.390 sys 0.120+1.910) clearcache (the other series): real 7.680 secs (user 1.120+23.420 sys 0.140+1.970) real 7.670 secs (user 1.110+23.620 sys 0.130+1.810) real 7.740 secs (user 1.090+23.510 sys 0.160+1.940) enable cache only for vfs and svfs (this series): real 8.730 secs (user 1.500+25.190 sys 0.260+2.260) real 8.750 secs (user 1.490+25.170 sys 0.250+2.340) real 9.010 secs (user 1.680+25.340 sys 0.280+2.540) remove cache function at all (for reference): real 9.620 secs (user 1.440+27.120 sys 0.250+2.980) real 9.420 secs (user 1.400+26.940 sys 0.320+3.130) real 9.760 secs (user 1.530+27.270 sys 0.250+2.970)

tests: show cache of audited paths is never invalidated

stable: merge heads

Added signature for changeset 943c91326b23

Added tag 4.2.3 for changeset 943c91326b23

ssh: unban the use of pipe character in user@host:port string This vulnerability was fixed by the previous patch and there were more ways to exploit than using '|shellcmd'. So it doesn't make sense to reject only pipe character. Test cases are updated to actually try to exploit the bug. As the SSH bridge of git/svn subrepos are not managed by our code, the tests for non-hg subrepos are just removed. This may be folded into the original patches.

ssh: quote parameters using shellquote (SEC) This patch uses shellquote to quote ssh parameters more strictly to avoid shell injection.

subrepo: add tests for git rogue ssh urls (SEC) 'ssh://' has an exploit that will pass the url blindly to the ssh command, allowing a malicious person to have a subrepo with '-oProxyCommand' which could run arbitrary code on a user's machine. In addition, at least on Windows, a pipe '|' is able to execute arbitrary commands. When this happens, let's throw a big abort into the user's face so that they can inspect what's going on.

subrepo: add tests for svn rogue ssh urls (SEC) 'ssh://' has an exploit that will pass the url blindly to the ssh command, allowing a malicious person to have a subrepo with '-oProxyCommand' which could run arbitrary code on a user's machine. In addition, at least on Windows, a pipe '|' is able to execute arbitrary commands. When this happens, let's throw a big abort into the user's face so that they can inspect what's going on.

subrepo: add tests for hg rogue ssh urls (SEC) 'ssh://' has an exploit that will pass the url blindly to the ssh command, allowing a malicious person to have a subrepo with '-oProxyCommand' which could run arbitrary code on a user's machine. In addition, at least on Windows, a pipe '|' is able to execute arbitrary commands. When this happens, let's throw a big abort into the user's face so that they can inspect what's going on.

push: add tests for unsafe ssh url (SEC)

pull: add tests for unsafe ssh url (SEC)

clone: add tests for unsafe ssh url (SEC)

sshpeer: check for safe ssh url (SEC) Checking in the sshpeer for a rogue ssh:// urls seems like the right place to do it (instead of whack-a-mole with pull, clone, push, etc).

ssh: ban any username@host or host that starts with - (SEC) This paranoia probably isn't required, but it can't hurt either.

util: add utility method to check for bad ssh urls (SEC) Our use of SSH has an exploit that will parse the first part of an url blindly as a hostname. Prior to this set of security patches, a url with '-oProxyCommand' could run arbitrary code on a user's machine. In addition, at least on Windows, a pipe '|' can be abused to execute arbitrary commands in a similar fashion. We defend against this by checking ssh:// URLs and looking for a hostname that starts with a - or contains a |. When this happens, let's throw a big abort into the user's face so that they can inspect what's going on.

pathauditor: disable cache of audited paths by default (issue5628) The initial attempt was to discard cache when appropriate, but it appears to be error prone. We had to carefully inspect all places where audit() is called e.g. without actually updating filesystem, before removing files and directories, etc. So, this patch disables the cache of audited paths by default, and enables it only for the following cases: - short-lived auditor objects - repo.vfs, repo.svfs, and repo.cachevfs, which are managed directories and considered sort of append-only (a file/directory would never be replaced with a symlink) There would be more cacheable vfs objects (e.g. mq.queue.opener), but I decided not to inspect all of them in this patch. We can make them cached later. Benchmark result: - using old clone of http://selenic.com/repo/linux-2.6/ (38319 files) - on tmpfs - run HGRCPATH=/dev/null hg up -q --time tip && hg up -q null - try 4 times and take the last three results original: real 7.480 secs (user 1.140+22.760 sys 0.150+1.690) real 8.010 secs (user 1.070+22.280 sys 0.170+2.120) real 7.470 secs (user 1.120+22.390 sys 0.120+1.910) clearcache (the other series): real 7.680 secs (user 1.120+23.420 sys 0.140+1.970) real 7.670 secs (user 1.110+23.620 sys 0.130+1.810) real 7.740 secs (user 1.090+23.510 sys 0.160+1.940) enable cache only for vfs and svfs (this series): real 8.730 secs (user 1.500+25.190 sys 0.260+2.260) real 8.750 secs (user 1.490+25.170 sys 0.250+2.340) real 9.010 secs (user 1.680+25.340 sys 0.280+2.540) remove cache function at all (for reference): real 9.620 secs (user 1.440+27.120 sys 0.250+2.980) real 9.420 secs (user 1.400+26.940 sys 0.320+3.130) real 9.760 secs (user 1.530+27.270 sys 0.250+2.970)

tests: show cache of audited paths is never invalidated

Added signature for changeset 5544af862286

Added tag 4.3 for changeset 5544af862286

chg: define _GNU_SOURCE to allow CentOS 5 compilation Without this flag, compilation fails with: hgclient.c: In function 'hgc_open': hgclient.c:466: error: 'O_DIRECTORY' undeclared (first use in this function) hgclient.c:466: error: (Each undeclared identifier is reported only once hgclient.c:466: error: for each function it appears in.) Differential Revision: https://phab.mercurial-scm.org/D260

centos5: use vault urls CentOS 5 has reached end-of-life. A working build for it is still possible using 'vault.centos.org'. Differential Revision: https://phab.mercurial-scm.org/D261

ui: make sure buffer is flushed before waiting for user input (issue5587) Without this patch on Windows 'hg ci -i' hangs waiting for user input and "examine changes to 'file'? [Ynesfdaq?]" is never displayed (at least if the diff is sufficiently small). When Ctrl+C is pressed, this prompt becomes visible, which suggests that the buffer just wasn't flushed. I've never seen this happening on Linux, but this looks harmless enough to not platform-gate it.