tests: update duplicateoptions test to use bytestrings everywhere Test now passes on Python 3. Differential Revision: https://phab.mercurial-scm.org/D297

extensions: attempt to use non-deprecated inspect method Avoids some deprecation warnings when extension loading breaks. Differential Revision: https://phab.mercurial-scm.org/D295

tests: clean up many print statements to be print functions instead Differential Revision: https://phab.mercurial-scm.org/D294

tests: fix simple heredoc print statements to work on Py3 There are a handful left that require some more care. Differential Revision: https://phab.mercurial-scm.org/D293

obsolete: use bytes() instead of str() so the node is bytes on py3 I'm not sure this is right, since this should either be bytes or str to match what's going on in the revlog layer. Differential Revision: https://phab.mercurial-scm.org/D271

tests: fix test-notify.t to use $PYTHON In doing so, I consolidated the filtering logic. This resulted in some small test output changes, but I think the consistency throughout the test is worth it. Differential Revision: https://phab.mercurial-scm.org/D279

tests: make test-highlight code portable to python3 This is easier than trying to do some sort of check-code shenanigans. Differential Revision: https://phab.mercurial-scm.org/D278

dagparser: make print statement in doctest Py3 portable Differential Revision: https://phab.mercurial-scm.org/D277

i18n: fix check-translation.py to be less broken on Python 3 These are all simple one-argument print statements, so this syntax works the same way in 2 and 3. Differential Revision: https://phab.mercurial-scm.org/D276

ui: refactor extractchoices so it doesn't break on Python 3 Differential Revision: https://phab.mercurial-scm.org/D275

obsutil: defend against succsmarkers() returning None I'm not sure if this is a realistic problem, but doing this avoids some pretty awful test failures on Python 3, and it looks like it should be harmless. Differential Revision: https://phab.mercurial-scm.org/D274

changegroup: more **kwargs Differential Revision: https://phab.mercurial-scm.org/D273

bundle2: convert ints to strings using pycompat.bytestring() Fixes some Python 3 regressions. We don't use %d here because the part id is actually an Optional[int]. It should always be initialized to a non-None value by the time this code executes, but we shouldn't blindly depend on that being the case. Differential Revision: https://phab.mercurial-scm.org/D272

tests: fix up test-run-tests failures on Python 3.6 Some of the recent work on run-tests.py didn't work on Python 3. This fixes the regressions. Differential Revision: https://phab.mercurial-scm.org/D270

template: rename troubles templatekw into instabilities Rename troubles template keyword into instabilities and add a deprecation warning on templatekw. Update default mapfile and test files to use the new template keyword. The renaming is done according to https://www.mercurial-scm.org/wiki/CEDVocabulary. Differential Revision: https://phab.mercurial-scm.org/D237

test-rebase: add a brute force test Rebase is becoming more complex and it looks like a good idea to try some brute force enumeration to cover cases that are hard to find manually. Using brute force to generate repos in different shapes and enumerating the rebase source and destination would generate too many cases that takes too long to compute. This patch limits the "brute force" to only the "rebase source" part. Repo and destination are still manual. The added test cases are crafted manually to reveal some behaviors that are not covered by other tests: - "revlog index out of range" crash - after rebase, p1 == p2, p2 != null - "nothing to merge" abort In the future we might want to add more tests here. For now I'm more interested in revealing interesting behaviors in a minified way. I tried some more complex cases but didn't find other interesting behaviors. Differential Revision: https://phab.mercurial-scm.org/D262

dirstate: simplify dirstate's __iter__ Probably also a performance win, but not measurable in perfdirstate. Differential Revision: https://phab.mercurial-scm.org/D269

repo: skip invalidation of changelog if it has 'delayed' changes (API) The changelog object can store recently added revisions in memory until the transaction is committed. We don't want to lose those changes even if repo.invalidate(clearfilecache=True), so let's skip the changelog when it has such 'delayed' changes. Differential Revision: https://phab.mercurial-scm.org/D152

httppeer: make several instance attributes internal (API) Peer instances are supposed to conform to a well-defined API so consumers can be agnostic about the underlying peer type. To reinforce this, this commit renames a handful of instance attributes on httpeer so they no longer have a "public" name. Differential Revision: https://phab.mercurial-scm.org/D268

httppeer: remove unused handler attribute The consumer of this attribute was removed by b6bd4ee6ed85 in 2008. Differential Revision: https://phab.mercurial-scm.org/D267

localrepo: remove unused requirements attributes on localpeer (API) The previous changeset removed the last consumer of requirements. I'm not sure when supportedformats became unused. But I couldn't find any obvious instances where it is being used. It likely stems from peers being derived from repository instances several years ago and is a holdover from that day. Differential Revision: https://phab.mercurial-scm.org/D266

exchange: access requirements on repo instead of peer As part of formalizing the peer interface, I audited for attribute accesses for non-internal names to find API violations. This uncovered the code changed in this commit. localpeer.requirements is just an alias to the repo's requirements attribute. So, change the code to get the data from the source instead of relying on a one-off attribute in the localpeer type. Differential Revision: https://phab.mercurial-scm.org/D265

exchange: drop support for lock-based unbundling (BC) Locking over the wire protocol and the "addchangegroup" wire protocol command has been deprecated since e8c4f3d3df8c, which was first part of Mercurial 0.9.1. Support for handling these commands from sshserver was dropped in 9f6e0e7ef828 in 2015, effectively locking out pre 0.9.1 clients from new servers. However, client-side code for calling lock and addchangegroup is still present in exchange.py and the various peer classes to facilitate pushing to pre 0.9.1 servers. The lock-based pushing mechanism is extremely brittle. 0.9.1 was released in July 2006 and I highly doubt anyone is still running such an ancient version of Mercurial on a server. I'm about to refactor the peer API and I don't think it is worth keeping support for this ancient protocol feature. So, this commit removes client support for the lock-based pushing mechanism. This means modern clients will no longer be able to push to pre 0.9.1 servers. Differential Revision: https://phab.mercurial-scm.org/D264

http: add a test of actually pushing with httppostargs This was previously untested. Sigh. Differential Revision: https://phab.mercurial-scm.org/D230

filemerge: move decorator definition for internal merge tools to registrar This patch also adds extra loading entry for internal merge tools to extensions.py, for similarity to other decorators defined in registrar.py. This patch uses "internalmerge" for decorator class name, instead of original "internaltool", because the latter is too generic. BTW, after this patch, 4-spaces indentation is added to the 1st line of internal merge tool description docstring, and this may make already translated entries in *.po fuzzy. Even though this indentation is required for "definition list" in reST syntax, absence of it has been overlooked, because help.makeitemsdoc() forcibly inserts it at generation of online help. But this forcible insertion causes formatting issue (I'll send another patch series for this). Therefore, this additional indentation should be reasonable.

releasenotes: add similarity check function to compare incoming notes It is possible that the incoming note fragments have some similar content as the existing release notes. In case of a bug fix, we match for issueNNNN in the existing notes. For other general cases, it makes use of fuzzywuzzy library to get a similarity score. If the score is above a certain threshold, we ignore the fragment, otherwise add it. But the score might be misleading for small commit messages. So, it uses similarity function only if the length of string (in words) is above a certain value. The patch adds tests related to its usage. But it needs improvement in the sense of combining incoming notes. We can use interactive mode for adding notes. Maybe we can do this if similarity is under a certain range.

releasenotes: add import check for fuzzywuzzy This patch adds the has_fuzzywuzzy for import check of external dependency fuzzywuzzy.

run-tests: don't drop optional lines after a missing unconditional line The previous behavior was to bail out when hitting 'awol', so 'missing (?)' was also dropped.

run-tests: drop required (feature !) style lines when the output is missing Essentially, these were acting as a verbose (?) flag, since they weren't being dropped when required. Foozy has a nice description [1]. Basically, a couple more places needed to check the features before treating it as optional. I don't like how test-run-tests.py had to be hacked, but _hghave() can't be made a static method. The test change was a change while developing `debugssl`, prior to tightening up the cases where the message is printed, that this fix would have caught. [1] https://www.mercurial-scm.org/pipermail/mercurial-devel/2017-July/101941.html

status: avoid recursing into ignored directory with "--terse u" Let "isignoreddir" function first check that supplied directory is itself ignored before walking recursively into its content. Otherwise, the command is awfully slow when one has an ignored directory with a lot of content. Update and rephrase function docstring accordingly.