Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 11 Apr 2021 19:20:14 +0200] rev 46912
outgoing: remove some early return
Since
066b8d8f75b8, the push command accept multiple destination. However `hg
outgoing` does not. On the way to fix this, we need to clean up the outgoing
code. We start with removing some early return to make the code ready to house
more changes.
Differential Revision: https://phab.mercurial-scm.org/D10380
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 10 Apr 2021 21:55:01 +0200] rev 46911
infinitepush: use the new function to determine push destination
Since
066b8d8f75b8, the push command accept multiple destination. `infinitepush`
was not aware of that. We now use the new `urlutil.get_push_paths` function to
determine the push destination, fixing the issue. This will also make future
evolution of that logic transparent for infinitepush
We still disallow push to multiple destinations if infinite push is enabled
because I don't know what this means for infinite push. However user will now
get a clear error message instead of a crash.
Differential Revision: https://phab.mercurial-scm.org/D10379
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 13 Apr 2021 12:28:44 +0200] rev 46910
urlutil: add a `get_pull_paths` to perform the pull destination logic
As is this changeset does not change anything. However having an official empty
point will help unifying the logic and encapsulate the details and update the
logic to support path definition pointing to multiple other path.
Differential Revision: https://phab.mercurial-scm.org/D10378
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 12 Apr 2021 22:22:56 +0200] rev 46909
urlutil: add a `get_push_paths` to perform the push destination logic
As is this changeset does not change anything. However having an official empty
point will help unifying the logic and encapsulate the details and update the
logic to support path definition pointing to multiple other path.
Differential Revision: https://phab.mercurial-scm.org/D10377
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 12 Apr 2021 06:34:54 +0200] rev 46908
urlutil: extract `parseurl` from `hg` into the new module
The new module is well fitting for this new code. And this will be useful to
make the gathered code collaborate more later.
Differential Revision: https://phab.mercurial-scm.org/D10375
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 12 Apr 2021 03:01:04 +0200] rev 46907
urlutil: extract `url` related code from `util` into the new module
The new module is well fitting for this new code. And this will be useful to
make the gathered code collaborate more later.
Differential Revision: https://phab.mercurial-scm.org/D10374
Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 11 Apr 2021 23:54:35 +0200] rev 46906
urlutil: extract `path` related code into a new module
They are a lot of code related to url and path handling scattering into various
large module. To consolidate the code before doing more change (for defining
"multi-path"), we gather it together.
Differential Revision: https://phab.mercurial-scm.org/D10373
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 10 Apr 2021 15:30:32 +0200] rev 46905
help: document the `path://` url scheme
If we want people to use it, we need to document it.
Differential Revision: https://phab.mercurial-scm.org/D10372
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 10 Apr 2021 15:28:10 +0200] rev 46904
help: point to `hg help urls` in `hg help config.paths`
This seems useful to point at what people can put as value for these config.
Differential Revision: https://phab.mercurial-scm.org/D10371
Matt Harbison <matt_harbison@yahoo.com> [Mon, 12 Apr 2021 22:42:47 -0400] rev 46903
merge with stable
Charles Chamberlain <cchamberlain@janestreet.com> [Fri, 09 Apr 2021 17:41:48 -0400] rev 46902
narrow: add capabilities for local repos, not just remote peers
This fixes the bug where running `hg clone --narrow ./local-repo`
fails with
abort: server does not support narrow clones
even when the server has narrow enabled.
Differential Revision: https://phab.mercurial-scm.org/D10357
Matt Harbison <matt_harbison@yahoo.com> [Thu, 25 Mar 2021 22:29:41 -0400] rev 46901
typing: make minor adjustments to mercurial/util.py to pass pytype checking
I'm assuming the wrong-arg-count is a pytype bug, because this code is used by
the config object. Avoiding initializing `_lrucachenode` node points to None
eliminates a few `is not None` assertions, but apparently not all of them. I
can't figure out why it gets confused over the state where these new assertions
are.
Differential Revision: https://phab.mercurial-scm.org/D10276
Matt Harbison <matt_harbison@yahoo.com> [Thu, 25 Mar 2021 20:22:00 -0400] rev 46900
util: fix the signature for the pypy override of sortdict.update()
PyCharm flagged this as not matching the base class signature. Not sure if
there was anything supplying these extra arguments though.
Differential Revision: https://phab.mercurial-scm.org/D10275
Matt Harbison <matt_harbison@yahoo.com> [Thu, 25 Mar 2021 18:59:14 -0400] rev 46899
typing: add type hints to mercurial/error.py
The only slightly unusual things here are that `location` is passed to
`ParseError` and both bytes and an int (so this accepts both), and the message
passed `ProgrammingError` is immediately converted to str. Therefore it is
typed as `AnyStr`, because there are a couple of instances that are already
passed as str.
There are a couple of places where bytes are being passed to builtin exceptions
that might need to be converted to str.
Differential Revision: https://phab.mercurial-scm.org/D10274
Matt Harbison <matt_harbison@yahoo.com> [Fri, 19 Mar 2021 00:36:26 -0400] rev 46898
tests: add a (very slow) test that executes pytype
This is an updated form of D7295, and completes successfully with pytype
2021.03.22. The 5 or so crashes that were mostly in the hgweb files seems to
have been fixed in 2021.03.10.
Differential Revision: https://phab.mercurial-scm.org/D10237
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 06 Apr 2021 10:38:27 +0200] rev 46897
upgrade: do not hardcore file extension of revlogs
This logic already lives inside the `store` module. So lets reuse it instead.
Differential Revision: https://phab.mercurial-scm.org/D10317
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 06 Apr 2021 10:38:11 +0200] rev 46896
upgrade: take advantage of the new information returned by `store.walk`
Before this change the upgrade code had to analyse filename to process them directly. Lets keep that logic private to the store and more to a more robust explicit approach.
Differential Revision: https://phab.mercurial-scm.org/D10316
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 06 Apr 2021 10:38:03 +0200] rev 46895
store: also return some information about the type of file `walk` found
We start returning of 4th information in the `store.walk` return tuple: the type of the file. This will make it easier for caller to determine which kind of file they are looking at. This should especically help with the `upgrade-repo` code that has to do a lot of fragile index's file name comparison.
Differential Revision: https://phab.mercurial-scm.org/D10315
Matt Harbison <matt_harbison@yahoo.com> [Mon, 05 Apr 2021 23:54:54 -0400] rev 46894
tests: skip test-git-interop.t on Windows
Casefolding isn't handled in dirstate yet, triggering a bunch of assertions.
But while this is more correctly `no-icasefs`, it's more likely to get attention
if someone sees it. I'd just rather not have it adding to the noise on Windows
for now.
Differential Revision: https://phab.mercurial-scm.org/D10312
Matt Harbison <matt_harbison@yahoo.com> [Mon, 05 Apr 2021 13:02:51 -0400] rev 46893
contrib: restore the `hg fix` configuration in the examples
After
decc3bd3f20d, running `black` will DTRT, but running `hg fix` did nothing
(unless the example config file was %included, in which case it truncated the
file instead of formatting it). I'm not sure why that was happening, but let's
not leave a code shredder laying around.
Differential Revision: https://phab.mercurial-scm.org/D10311
Valentin Gatien-Baron <vgatien-baron@janestreet.com> [Wed, 31 Mar 2021 17:54:02 -0400] rev 46892
blackbox: fix type error on log rotation on read-only filesystem
Grepping around, the code uses either encoding.strtolocal or
stringutil.forcebytestr in this situation. No idea which is best.
Differential Revision: https://phab.mercurial-scm.org/D10293
Simon Sapin <simon.sapin@octobus.net> [Thu, 08 Apr 2021 14:38:27 +0200] rev 46891
rust: Remove use of `py.eval()`
The previous Rust code allocated an intermediate `Vec`, converted that
to a Python list, then used `eval` to run Python code that converts that
list to a Python set.
rust-cpython exposes Rust bindings for Python sets, let’s use that instead
to construct a set directly.
Differential Revision: https://phab.mercurial-scm.org/D10328
Simon Sapin <simon.sapin@octobus.net> [Thu, 08 Apr 2021 21:46:54 +0200] rev 46890
rust: Remove the compile-time 'dirstate-tree' feature flag
This code has compiler errors since it is not built on CI and nobody has been
working on it for some time.
We (Octobus) are still pursuing status optimizations based on a tree data
structure for the dirstate, but upcoming patches will use a run-time opt-in
instead of compile-time, so that at least corresponding Rust code keeps
compiling when other changes are made.
Differential Revision: https://phab.mercurial-scm.org/D10329
Valentin Gatien-Baron <valentin.gatienbaron@gmail.com> [Sun, 13 Sep 2020 22:14:25 -0400] rev 46889
procutil: avoid using os.fork() to implement runbgcommand
We ran into the following deadlock:
- some command creates an ssh peer, then raises without explicitly
closing the peer (hg id + extension in our case)
- dispatch catches the exception, calls ui.log('commandfinish', ..)
(the sshpeer is still not closed), which calls logtoprocess, which
calls procutil.runbgcommand.
- in the child of runbgcommand's fork(), between the fork and the
exec, the opening of file descriptors triggers a gc which runs the
destructor for sshpeer, which waits on ssh's stderr being closed,
which never happens since ssh's stderr is held open by the parent of
the fork where said destructor hasn't run
Remotefilelog appears to have a hack around this deadlock as well.
I don't know if there's more subtlety to it, because even though the
problem is determistic, it is very fragile, so I didn't manage to
reduce it.
I can imagine three ways of tackling this problem:
1. don't run any python between fork and exec in runbgcommand
2. make the finalizer harmless after the fork
3. close the peer without relying on gc behavior
This commit goes with 1, as forking without exec'ing is tricky in
general in a language with gc finalizers. And maybe it's better in the
presence of rust threads. A future commit will try 2 or 3.
Performance wise: at low memory usage, it's an improvement. At higher
memory usage, it's about 2x faster than before when ensurestart=True,
but 2x slower when ensurestart=False. Not sure if that matters. The
reason for that last bit is that the subprocess.Popen always waits for
the execve to finish, and at high memory usage, execve is slow because
it deallocates the large page table. Numbers and script:
before after
mem=1.0GB, ensurestart=True 52.1ms 26.0ms
mem=1.0GB, ensurestart=False 14.7ms 26.0ms
mem=0.5GB, ensurestart=True 23.2ms 11.2ms
mem=0.5GB, ensurestart=False 6.2ms 11.3ms
mem=0.2GB, ensurestart=True 15.7ms 7.4ms
mem=0.2GB, ensurestart=False 4.3ms 8.1ms
mem=0.0GB, ensurestart=True 2.3ms 0.7ms
mem=0.0GB, ensurestart=False 0.8ms 0.8ms
import time
for memsize in [1_000_000_000, 500_000_000, 250_000_000, 0]:
mem = 'a' * memsize
for ensurestart in [True, False]:
now = time.time()
n = 100
for i in range(n):
procutil.runbgcommand([b'true'], {}, ensurestart=ensurestart)
after = time.time()
ms = (after - now) / float(n) * 1000
print(f'mem={memsize / 1e9:.1f}GB, ensurestart={ensurestart} -> {ms:.1f}ms')
Differential Revision: https://phab.mercurial-scm.org/D9019
Matt Harbison <matt_harbison@yahoo.com> [Thu, 08 Apr 2021 18:43:08 -0400] rev 46888
share: store relative share paths with '/' separators
I created a relative share in Windows and tried to use it in WSL, and it failed:
abort: .hg/sharedpath points to nonexistent directory
/mnt/c/Users/Matt/hg-review/.hg/..\..\hg\.hg
Use `normpath` on the read side so that the code has the usual Windows style
paths it always had (I don't think that matters much), but it also eliminates
the directory escaping path components in the case where the path is printed.
This will not fix repositories that have already been created, but it's trivial
enough to hand edit the file to correct it.
Differential Revision: https://phab.mercurial-scm.org/D10330
Simon Sapin <simon.sapin@octobus.net> [Fri, 09 Apr 2021 12:02:51 +0200] rev 46887
unit-tests: Fix `cargo test` on 32-bit platforms
Fixes https://bz.mercurial-scm.org/show_bug.cgi?id=6506
This makes `IndexEntryBuilder::build`, which is only used in unit tests, use
`u32` or `u64` instead of platform-dependent `usize` when packing binary data
to be used at test input.
To run Rust unit tests in 32-bit mode in a x86-64 environment, use:
rustup target add i686-unknown-linux-gnu # Once
(cd rust && cargo test --target i686-unknown-linux-gnu)
Differential Revision: https://phab.mercurial-scm.org/D10351
Martin von Zweigbergk <martinvonz@google.com> [Fri, 09 Apr 2021 08:46:40 -0700] rev 46886
rename: add --forget option and stop suggesting `hg revert` for undoing
Differential Revision: https://phab.mercurial-scm.org/D10355
Matt Harbison <matt_harbison@yahoo.com> [Fri, 09 Apr 2021 11:32:19 -0400] rev 46885
win32: enable legacy I/O mode to fix missing pager output on Windows with py3
The equivalent interpreter option is set by wrapper.exe, but this *.bat file is
what gets installed in a venv. Without this mode, any command that spins up a
pager has no output, unless the pager is explicitly disabled. The variable is
set inside the `setlocal` scope to keep it from leaking into the environment
after the bat file exits.
We should probably still figure out how to ship a compiled hg.exe when
installing with `pip`, because the binary does other things like enable long
filename support. But this avoids the dangerous and confusing lack of output in
the meantime.
Differential Revision: https://phab.mercurial-scm.org/D10354
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 14 Jan 2021 04:58:20 +0100] rev 46884
persistent-nodemap: enable the feature by default when using Rust
As discussed at the 5.6 sprint, we can make it enabled by default, but only for
Rust installation.
Differential Revision: https://phab.mercurial-scm.org/D9765
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 09 Apr 2021 03:36:24 +0200] rev 46883
persistent-nodemap: disable it for test-wireproto-content-redirects.t
This is not relevant for the test and this will avoid a lot of variations.
Differential Revision: https://phab.mercurial-scm.org/D10338