obsfate: filter out current user if not in verbose Obsolescence is sometimes used only locally so the obs-marker users is always the same. Showing the user in this case does not bring much values. In the case where multiple users rewrite the commit, display the full list of users. Also show all users in verbose mode.

ui: add the possibility to returns None as username in ui In a later patch we want to retrieve the current username or None if it isn't defined. Add the acceptempty parameter instead of catching Abort.

test: test obfate template keyword in test-obsmarker-template.t These test updates are pretty big by themselves so put it in a separate patch for easing the review process.

templatekw: introduce obsfate keyword Introduce an obsfate printer that uses all helpers functions defined in obsutil to get all the obsfate-related data and format a string according to the current format in test-obsmarker-template.t. Then, introduce an obsfate templatekw that uses the obsfateprinter to return a list of strings. The goal is not to replace existing obsfate template functions but to propose a default, good-enough and easily usable obsfate definition for end-users that don't want to customize it. Such output would ultimately get included in the default log output. Here are some output examples for a commit amended: rewritten using amend as 5:a9b1f8652753 by test (at 1970-01-01 00:00 +0000) Next patches will make the output dependent on the verbosity. Exemple of use-cases: For having the obsfate on a single-line between brackets: {if(obsfate, " [{join(obsfate, "; ")}]")} For having the obsfate in several lines: {if(obsfate, "{obsfate % " Obsfate: {fate}\n"}")}

copies: add a config to limit the number of candidates to check in heuristics The heuristics algorithm find possible candidates for move/copy and then check whether they are actually a copy or move. In some cases, there can be lot of candidates possible which can actually slow down the algorithm. This patch introduces a config option `experimental.copytrace.movecandidateslimit` using which one can limit the candidates to check. The limit defaults to 100. Thanks to Yuya for suggesting to skip copytracing for that file with a warning. Differential Revision: https://phab.mercurial-scm.org/D987

extensions: always include traceback when extension setup fails I have spent a lot of time debugging extensions that failed to load because we don't include a traceback and I didn't realize I could get traceback for the extension failure with --traceback. Let's just turn them on by default, since it should be rare that the user sees these tracebacks anyway (and if they do, it's not so bad if the extra traceback pushes them a little harder to report the problem). Since we already had a test case with --traceback and one without, I just removed the one with the flag. Differential Revision: https://phab.mercurial-scm.org/D1164

tests: move baduisetup() test out of "#if demandimport" It no longer depends on demandimport. Differential Revision: https://phab.mercurial-scm.org/D1163

tests: make test-extension.t's baduisetup.py test fail even if bdiff exists A mercurial.bdiff module has existed at some point and when I have built at an old version, some .pyc file or something seems to stick around and test-extension.t fails. Let's remove the reference to bdiff and simplify the test. Differential Revision: https://phab.mercurial-scm.org/D1162

run-tests: move newline out of colorized message The leading newline before "ERROR:" led to an incorrect lexing of the message and the newline got lost. The fixed formatting can be seen in the test case. The reason we didn't notice before was that the bad formatting just led to the loss of a blank line in the test. However, there are other cases where it would be joined with a line saying "Accept this change? [n]" or "Reference output has changed (run again to prompt changes)". Differential Revision: https://phab.mercurial-scm.org/D1159

test-extension: make the test compatible with chg This test fails when run with chg. This commit just makes the test chg aware by fixing the output of some of the tests. Test Plan: Ran the test 'test-extension.t' with and without '--chg' option. Differential Revision: https://phab.mercurial-scm.org/D1160

hghave: disable demandimport when chg is running Chg disables demandimport on purpose for performance wins and therefore, it probably makes sense to indicate that demandimport is disabled when chg is running. Test Plan: Ran all the tests. Differential Revision: https://phab.mercurial-scm.org/D1161

test-show: make it compatible with chg The show extension reads `commands.show.aliasprefix` config in its `extsetup` and that causes issues with chg. This patch adds that config item to chg confighash to solve the issue. Test Plan: `run-tests.py -l --chg test-show.t` Differential Revision: https://phab.mercurial-scm.org/D1158

templater: use pycompat.sysbytes to bytes-ify some __name__ attrs Spotted by yuya in review of e87e62b7fc0b. Differential Revision: https://phab.mercurial-scm.org/D1145

templatefilters: defend against evil unicode strs in json filter We only want to do I/O in terms of bytes, so lets explode early instead of recursing forever. Differential Revision: https://phab.mercurial-scm.org/D1136

phase: use a binary phase part to push through bundle2 (BC) The part we are using for pull is now used for push too. As we no longer use pushkey, pushkey hooks are no longer triggered. This is an obvious backward incompatible change. We could artificially trigger the pushkey hook within the bundle2 part, but this seemed too hacky to me. An option would be to disable by default this new mechanism for a couple of versions to help people migrate to `txnclose-phase`. I took the liberal and optimistic path to just turn it on by default directly. .. bc:: Push no longer triggers a pushkey hook when updating phases. Use the new `txnclose-phase` and `txnclose-phase` hooks instead. (Applies when both server and client use version 4.4 or above).

arbitraryfilecontext: skip the cmp fast path if any side is a symlink `filecmp` follows symlinks by default, which a `filectx.cmp()` call should not be doing as it should only compare the requested entry. After this patch, only the contexts' data are compared, which is the correct contract. This is a corrected version of D1122. Differential Revision: https://phab.mercurial-scm.org/D1165

test-clang-format: new test to verify that files stay clang-formatted For now all .c and .h files are blacklisted. As they become clang-formatted, we'll remove them from the blacklist,and then this test will produce output if there are diffs. Differential Revision: https://phab.mercurial-scm.org/D1133

context: audit paths before clearing unknown files and dirs Fix regression introduced in D785. In some circumstances, context.clearunknown can be called before the path is audited. Audit the path before deleting any conflicting files. Differential Revision: https://phab.mercurial-scm.org/D1157

tests: add test demonstrating regression in path audit D785 regressed behavior in path auditing: files can be deleted if they have a path that conflicts with a filename from a malicious remote or bundle. This test demonstrates the problem - the file should not have been deleted. Differential Revision: https://phab.mercurial-scm.org/D1156

configitems: move rebase config into core The shelve extensions import and call rebase content without loading the extension. This is problematic as the config items rebase uses are not declared and the default value are not set, etc... The shelve extension should be using core utilities only and the necessary bit should be moved from rebase into core. In the meantime, I'm taking a small step to get config registration completed with minimal overhead. The rebase extension is shipped with core so registering its config option within core is not a big issue. This is the last step needed before we can install a warning that enforces all config to be registered.

eol: ensure the eol extensions is loaded when hooks run Similar to the change we did to the 'acl' extensions, we want to make sure the config items are registered before we run the hooks.

acl: make sure the extensions is enabled when the acl-hooks run The acl extension is usually setup through hooks and never directly activated. This means the config item declared in the extension are not loaded. We add the necessary logic to make sure the extensions are loaded before the hook run.

configitems: register the 'web.archivesubrepos' config

configitems: register the 'experimental.effect-flags' config