Matt Mackall <mpm@selenic.com> [Sat, 19 Jul 2014 00:10:22 -0500] rev 21926
merge default into stable for 3.1 code freeze
Matt Harbison <matt_harbison@yahoo.com> [Fri, 18 Jul 2014 19:46:56 -0400] rev 21925
revset: avoid a ValueError when 'only()' is given an empty set
This previously died in _revdescendants() taking the min() of the first set to
only(), when it was empty. An empty second set already worked. Likewise,
descendants() already handled an empty set.
FUJIWARA Katsunori <foozy@lares.dti.ne.jp> [Tue, 15 Jul 2014 23:34:13 +0900] rev 21924
cmdutil: make commit message shown in text editor customizable by template
This patch makes commit message shown in text editor customizable by
template. For example, this can advertise:
- sample commit messages for routine works,
- points to call attention before commit,
- message of the day, and so on
To show commit message correctly even in problematic encoding, this
patch chooses the latter below:
- replace "buildcommittext" with "buildcommittemplate" completely
- invoke "buildcommittemplate" only if '[committemplate] changeset'
is configured explicitly
For example, if multibyte character ending with backslash (0x5c) is
followed by ASCII character 'n' in the customized template, sequence
of backslash and 'n' is treated as line-feed unexpectedly (and
multibyte character is broken, too).
This corruption occurs in 'decode("string-escape")' while parsing
template string.
Matt Mackall <mpm@selenic.com> [Fri, 18 Jul 2014 23:15:28 -0500] rev 21923
commiteditor: refactor default extramsg
Angel Ezquerra <angel.ezquerra@gmail.com> [Thu, 26 Jun 2014 01:20:25 +0200] rev 21922
filemerge: add internal:tagmerge merge tool
Add a new internal:tagmerge merge tool which implements an automatic merge
algorithm for mercurial's tag files
The tagmerge algorithm is able to resolve most merge conflicts that
currently would trigger a .hgtags merge conflict. The only case that
it does not (and cannot) handle is that in which two tags point to
different revisions on each merge parent _and_ their corresponding tag
histories have the same rank (i.e. the same length). In all other
cases the merge algorithm will choose the revision belonging to the
parent with the highest ranked tag history. The merged tag history is
the combination of both tag histories (special care is taken to try to
combine common tag histories where possible).
The algorithm also handles cases in which tags have been manually
removed from the .hgtags file and other similar corner cases.
In addition to actually merging the tags from two parents, taking into
account the base, the algorithm also tries to minimize the difference
between the merged tag file and the first parent's tag file (i.e. it
tries to make the merged tag order as as similar as possible to the
first parent's tag file order).
The algorithm works as follows:
1. read the tags from p1, p2 and the base
- when reading the p1 tags, also get the line numbers associated to each
tag node (these will be used to sort the merged tags in a way that
minimizes the diff to p1). Ignore the file numbers when reading p2 and
the base
2. recover the "lost tags" (i.e. those that are found in the base but not on p1
or p2) and add them back to p1 and/or p2
- at this point the only tags that are on p1 but not on p2 are those new
tags that were introduced in p1. Same thing for the tags that are on p2
but not on p2
3. take all tags that are only on p1 or only on p2 (but not on the base)
- Note that these are the tags that were introduced between base and p1 and
between base and p2, possibly on separate clones
4. for each tag found both on p1 and p2 perform the following merge algorithm:
- the tags conflict if their tag "histories" have the same "rank" (i.e.
length) _AND_ the last (current) tag is _NOT_ the same
- for non conflicting tags:
- choose which are the high and the low ranking nodes
- the high ranking list of nodes is the one that is longer.
In case of draw favor p1
- the merged node list is made of 3 parts:
- first the nodes that are common to the beginning of both the
low and the high ranking nodes
- second the non common low ranking nodes
- finally the non common high ranking nodes (with the last one
being the merged tag node)
- note that this is equivalent to putting the whole low ranking node
list first, followed by the non common high ranking nodes
- note that during the merge we keep the "node line numbers", which will
be used when writing the merged tags to the tag file
5. write the merged tags taking into account to their positions in the first
parent (i.e. try to keep the relative ordering of the nodes that come
from p1). This minimizes the diff between the merged and the p1 tag files
This is done by using the following algorithm
- group the nodes for a given tag that must be written next to each other
- A: nodes that come from consecutive lines on p1
- B: nodes that come from p2 (i.e. whose associated line number is None)
and are next to one of the a nodes in A
- each group is associated with a line number coming from p1
- generate a "tag block" for each of the groups
- a tag block is a set of consecutive "node tag" lines belonging to the
same tag and which will be written next to each other on the merged
tags file
- sort the "tag blocks" according to their associated number line
- put blocks whose nodes come all from p2 first
- write the tag blocks in the sorted order
Notes:
- A few tests have been added to test-tag.t. These tests are very specific to
the new internal:tagmerge tool, so perhaps they should be moved to their own
test file.
- The merge algorithm was discussed in a thread on the mercurial mailing list.
In http://markmail.org/message/anqaxldup4tmgyrx a slightly different algorithm
was suggested. In it the p1 and p2 tags would have been interleaved instead of
put one before the other. It would be possible to implement that but my tests
suggest that the merge result would be more confusing and harder to understand.
Matt Mackall <mpm@selenic.com> [Fri, 18 Jul 2014 21:49:52 -0500] rev 21921
filemerge: use non-minimal conflict marker regions (BC)
As extensively detailed by Pierre-Yves[1], simplemerge's minimal
markers can result in hopeless confusion for many common merges. As it
happens, we accidentally inherited this behavior when we borrowed
simplemerge from bzr; it is not the behavior used by RCS's merge(1),
Since merge(1) (and not bzr) is what we aim to emulate when emulating
RCS's merge markers, we simply turn this feature off. This brings us
in line with the behavior of CVS, SVN, and Git as a bonus.
(NB: using conflict markers with Mercurial is discouraged.)
[1] http://markmail.org/message/wj5mh3lc46czlvld
convert glob tessa
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 09 Jun 2014 03:49:07 -0700] rev 21920
test: use more elaborated content in ``test-conflict.t``
We are going to introduce a setting to control the "minimisation" feature of
``internal:merge``. So we need more interesting conflicting content. We change
the content in an independent changeset to make sure the coming code change
leave the output unchanged.
Matt Mackall <mpm@selenic.com> [Fri, 18 Jul 2014 17:52:18 -0500] rev 21919
run-tests: make --view work again
FUJIWARA Katsunori <foozy@lares.dti.ne.jp> [Sun, 06 Jul 2014 02:56:41 +0900] rev 21918
filemerge: use 'basic' as the default of '[ui] mergemarkers' for safety
Before this patch, 'detailed' is used as the default of '[ui]
mergemarkers'. This embeds non-ASCII characters in tags, branches,
bookmarks, author and/or commit descriptions into merged files in the
encoding specified by '--encoding' global option, 'HGENCODING' or
other locale setting environment variables.
But, if files to be merged use another encoding, this behavior breaks
consistency of encoding in merged files.
For example, ISO-2022-JP or EUC-JP are sometimes used as the file
encoding for Japanese characters, because of historical and/or
environmental reasons, even though UTF-8 or Shift-JIS are ordinarily
used as the terminal encoding.
This can't be resolved automatically, because Mercurial doesn't aware
encoding of managed files.
This patch uses 'basic' as the default of '[ui] mergemarkers' to avoid
embedding encoding sensitive characters for safety.
This patch puts '[ui] mergemarkers = detailed' into default hgrc file
for tests, to reduce changes for tests in this patch.
Matt Harbison <matt_harbison@yahoo.com> [Thu, 17 Jul 2014 20:17:17 -0400] rev 21917
largefiles: avoid unnecessary creation of .hg/largefiles when opening lfdirstate
Previously, the directory '.hg/largefiles' would always be created if it didn't
exist when the lfdirstate was opened. If there were no standin files, no
dirstate file would be created in the directory. The end result was that
enabling the largefiles extension globally, but not explicitly adding a
largefile would result in the repository eventually sprouting this directory.
Creation of this directory effectively changes readonly operations like summary
and status into operations that require write access. Without write access,
commands that would succeed without the extension loaded would abort with a
surprising error when the extension is loaded, but not actively used:
$ hg sum -R /tmp/thg --config extensions.largefiles=
parent: 16541:
00dc703d5aed
repowidget: specify incoming bundle by plain file path to avoid url parsing
branch: default
abort: Permission denied: '/tmp/thg/.hg/largefiles'
This change is simpler than changing the callers of openlfdirstate() to use the
'create' parameter that was introduced in
ae57920ac188, and probably how that
should have been implemented in the first place.