Gregory Szorc <gregory.szorc@gmail.com> [Thu, 08 May 2014 16:48:28 -0700] rev 21261
mergestate: consistently set variables to None
Some code branches and exceptional circumstances such as empty
mergestate files could result in mergestate._local and
mergestate._other not being defined or reset to None. These variables
are now correctly set to None when they should be.
Durham Goode <durham@fb.com> [Wed, 07 May 2014 17:22:34 -0700] rev 21260
changegroup: refactor outgoing logic into a function
Extensions that add to bundle2 will want to know which commits are outgoing so
they can bundle data that is appropriate to those commits. This moves the logic
for figuring that out to a separate function so extensions can do the same
computation.
Durham Goode <durham@fb.com> [Wed, 07 May 2014 17:24:19 -0700] rev 21259
bundle2: fix bundle2 pulling all revs on empty pulls
When bundle2 was enabled, if hg pull had no commits to pull, it would print
'no changes found' and then download the entire repository from the server. This
was caused by heads and common being set to None, which gets treated as
heads=cl.heads() and common=[nullid], which means download the entire repo.
Pulling bundles without a changegroup is a valid use case (like if we're just
updating bookmarks), so this modifes the bundle code to allow not adding
changegroups.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 07 May 2014 19:26:15 -0700] rev 21258
exchange: fix bad indentation
Those two lines where double indented for no good reasons.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 07 May 2014 19:28:17 -0700] rev 21257
exchange: propagate arguments to the _getbundleextrapart function
The arguments was wrongly propagated (again).
Durham Goode <durham@fb.com> [Wed, 07 May 2014 17:20:38 -0700] rev 21256
bundle2: fix configuration name mismatch
During pulls bundle2 was checking server.bundle2, but during pushes it was
checking experimental.bundle2. This makes them both experimental.bundle2.
Matt Mackall <mpm@selenic.com> [Wed, 07 May 2014 17:58:13 -0500] rev 21255
build: initial support for in-tree autobuilding recipes
Gregory Szorc <gregory.szorc@gmail.com> [Sun, 04 May 2014 22:48:07 -0700] rev 21254
tests: declare commands using decorator
Gregory Szorc <gregory.szorc@gmail.com> [Sun, 04 May 2014 21:33:14 -0700] rev 21253
share: declare commands using decorator
Gregory Szorc <gregory.szorc@gmail.com> [Sun, 04 May 2014 21:52:25 -0700] rev 21252
relink: declare command using decorator
Gregory Szorc <gregory.szorc@gmail.com> [Sun, 04 May 2014 22:35:37 -0700] rev 21251
record: declare commands using decorator
Gregory Szorc <gregory.szorc@gmail.com> [Sun, 04 May 2014 21:31:51 -0700] rev 21250
hgk: declare commands using decorator
Gregory Szorc <gregory.szorc@gmail.com> [Sun, 04 May 2014 21:48:10 -0700] rev 21249
color: declare command using decorator
Gregory Szorc <gregory.szorc@gmail.com> [Sun, 04 May 2014 21:46:49 -0700] rev 21248
children: declare command using decorator
Gregory Szorc <gregory.szorc@gmail.com> [Sun, 04 May 2014 21:48:41 -0700] rev 21247
fetch: declare command using decorator
Gregory Szorc <gregory.szorc@gmail.com> [Sun, 04 May 2014 21:54:01 -0700] rev 21246
extdiff: declare command using decorator
Gregory Szorc <gregory.szorc@gmail.com> [Sun, 04 May 2014 21:46:24 -0700] rev 21245
churn: declare command using decorator
Gregory Szorc <gregory.szorc@gmail.com> [Sun, 04 May 2014 21:17:04 -0700] rev 21244
convert: declare commands using decorator
Gregory Szorc <gregory.szorc@gmail.com> [Sun, 04 May 2014 21:19:31 -0700] rev 21243
debugshell: declare command using decorator
Gregory Szorc <gregory.szorc@gmail.com> [Sun, 04 May 2014 21:09:06 -0700] rev 21242
largefiles: declare commands using decorator
FUJIWARA Katsunori <foozy@lares.dti.ne.jp> [Mon, 05 May 2014 21:26:40 +0900] rev 21241
cmdutil: omit redundant "savecommitmessage()" in "tryimportone()"
The preceding patch causes that "makememctx()" with "editor" argument
saves (manually edited) commit message into ".hg/last-message.txt":
saving itself is executed indirectly in "memctx.__init__()".
This makes it redundant to invoke "savecommitmessage()" on caller side
of "makememctx()".
This patch omits such redundant "savecommitmessage()" invocation in
"tryimportone()".
"tryimportone()" uses one of "commiteditor" or "commitforceeditor" as
"editor" argument, and this causes saving commit message always.
FUJIWARA Katsunori <foozy@lares.dti.ne.jp> [Mon, 05 May 2014 21:26:40 +0900] rev 21240
amend: use "editor" argument for "memctx.__init__" to save commit message
This patch uses "editor" argument of "memctx.__init__" to save commit
message, instead of explicit editor invocation and saving commit
message by "localrepository.savecommitmessage()".
By passing one of "commiteditor" or "commitforceeditor" as "editor",
"memctx.__init__" saves commit message, even when editor invocation is
not needed.
FUJIWARA Katsunori <foozy@lares.dti.ne.jp> [Mon, 05 May 2014 21:26:40 +0900] rev 21239
histedit: pass "editor" argument to "memctx.__init__()" for "collapse" command
The preceding patch causes that "memctx.__init__()" with "editor"
argument invokes editor and saves edited commit message into
".hg/last-message.txt".
This patch passes "editor" argument to "memctx.__init__()" instead of
explicit invocations of "commitforceeditor()" and
"savecommitmessage()" for "collapse" command.
FUJIWARA Katsunori <foozy@lares.dti.ne.jp> [Mon, 05 May 2014 21:26:40 +0900] rev 21238
context: move editor invocation from "makememctx()" to "memctx.__init__()"
This patch introduces "editor" argument to "memctx.__init__()", and
moves editor invocation from "makememctx()" to "memctx.__init__()", to
centralize editor invocation into "memctx" object creation.
This relocation is needed, because "makememctx()" requires the "store"
object providing "getfile()" to create "memfilectx" object, and this
prevents some code paths from using "makememctx()" instead of
"memctx.__init__()".
This patch also invokes "localrepository.savecommitmessage()", when
"editor" is specified explicitly, to centralize saving commit message
into "memctx" object creation: passing "cmdutil.commiteditor" as
"editor" can achieve both suppressing editor invocation and saving
into ".hg/last-message.txt" for non empty commit messages.
FUJIWARA Katsunori <foozy@lares.dti.ne.jp> [Mon, 05 May 2014 21:26:40 +0900] rev 21237
localrepo: add "editor" argument to "tag()"
Before this patch, "localrepository.tag()" doesn't take "editor"
argument, and this prevents callers from passing "editor" argument to
"localrepository.commit()" invoked internally.
This patch adds "editor" argument to "localrepository.tag()" (and
"_tag()", too), and makes "commands.tag()" invoke it with "editor"
argument.
This patch also omits explicit "localrepository.savecommitmesssage()"
invocation, because "localrepository.commit()" will invoke specified
"editor" and save edited commit message into ".hg/last-message.txt"
automatically.
FUJIWARA Katsunori <foozy@lares.dti.ne.jp> [Mon, 05 May 2014 21:26:40 +0900] rev 21236
qrefresh: use "editor" argument of "commit()" instead of explicit "ui.edit()"
Before this patch, "hg qrefresh" and "hg qfold" invoke "ui.edit()"
explicitly to get commit message edited manually.
This requires explicit "localrepository.savecommitmessage()"
invocation to save edited commit message into ".hg/last-message.txt",
because unexpected exception raising may abort command execution
before saving it in "localrepository.commit()".
This patch uses "editor" argument of "localrepository.commit()"
instead of explicit "ui.edit()" invocation for "hg qnew" and "hg qfold"
"localrepository.commit()" will invoke "desceditor()" function newly
added by this patch, and save edited commit message into
".hg/last-message.txt" automatically.
This patch passes not "editor" but "desceditor" to "commit()", because
"hg qnew" and "hg qfold" require editor function to return edited
message (and invoke "patchheader.setmessage()" with it) if not empty,
or default message otherwise.
This patch also avoids "not q.applied" check at "hg qrefresh --edit",
because it is also checked in "queue.refresh()", and it is not needed
to get commit message from patch header before "queue.refresh()".
FUJIWARA Katsunori <foozy@lares.dti.ne.jp> [Mon, 05 May 2014 21:26:40 +0900] rev 21235
qrefresh: relocate message/patch-header handling to delay message determination
Before this patch, commit message for refreshed MQ changeset is
determined, and written into refreshed patch file before
"localrepository.commit()" invocation.
This makes refactoring to use "editor" argument of "commit()" instead
of explicit "ui.edit()" invocation in succeeding patch difficult.
This patch relocates message/patch-header handling to delay message
determination.
FUJIWARA Katsunori <foozy@lares.dti.ne.jp> [Mon, 05 May 2014 21:26:40 +0900] rev 21234
qnew: use "editor" argument of "commit()" instead of explicit "ui.edit()"
Before this patch, "hg qnew" invokes "ui.edit()" explicitly to get
commit message edited manually.
This requires explicit "localrepository.savecommitmessage()"
invocation to save edited commit message into ".hg/last-message.txt",
because unexpected exception raising may abort command execution
before saving it in "localrepository.commit()".
This patch uses "editor" argument of "localrepository.commit()"
instead of explicit "ui.edit()" invocation for "hg qnew".
"localrepository.commit()" will invoke "desceditor()" function newly
added by this patch, and save edited commit message into
".hg/last-message.txt" automatically.
This patch passes not "editor" but "desceditor" to "commit()", because
"hg qnew" requires editor function to return edited message if not
empty, or default message otherwise.
This patch applies "rstrip()" on "defaultmsg" at comparison between
"nctx.description()" and "defaultmsg", because the former should be
stripped by "changelog.stripdesc()" and the latter may have tail white
spaces inherited from "patchfn".
FUJIWARA Katsunori <foozy@lares.dti.ne.jp> [Mon, 05 May 2014 21:26:40 +0900] rev 21233
histedit: use "editor" argument of "commit()" instead of explicit "ui.edit()"
Before this patch, "message" action of "hg histedit" uses "ui.edit()"
explicitly to get commit message edited manually.
This requires explicit "localrepository.savecommitmessage()"
invocation to save edited commit message into ".hg/last-message.txt",
because unexpected exception raising may abort command execution
before saving it in "localrepository.commit()".
This patch uses "editor" argument of "localrepository.commit()"
instead of explicit "ui.edit()" invocation for "message" action of "hg
histedit"
"localrepository.commit()" will invoke "editor()" function newly added
in this patch, and save edited commit message into ".hg/last-message.txt"
automatically.
Yuya Nishihara <yuya@tcha.org> [Tue, 29 Apr 2014 12:54:01 +0900] rev 21232
test-pyflakes: detect undefined name error
It should be able to catch the following mistakes at
2606e7f227f6:
mercurial/exchange.py:590: undefined name 'UnknownPartError'
mercurial/match.py:346: undefined name 'pat'
mercurial/win32.py:365: undefined name '_ERROR_NO_MORE_FILES'
tests/killdaemons.py:46: undefined name 'check'