convert/svn: handle non-local svn destination paths (issue3142) test-convert-svn-sink.t still pass and I tested pushing to an svn+ssh repository

setup: fix build_hgexe for mingw32 compiler Fixes python setup.py build_hgexe -i --compiler=mingw32

largefiles: fix path handling for cp/mv (issue3516) Previously, a copy or a move of a largefile only worked if the cwd was the root of the repository. The first issue was that the destination path passed to os.mkdirs() chopped the absolute path to the standin after '.hglf/', which essentially created a path relative to the repository root. Similarly, the second issue was that the source and dest paths for copyfile() were relative to the repo root. This converts these three paths to absolute paths. Some notable issues, regardless of the directory in which the cp/mv is executed: 1) The copy is not being recorded in lfdirstate, but it is in dirstate for the standins. I'm not sure if this is by design (i.e. minimal info in lfdirstate). 2) status -C doesn't behave as expected. Using the testcase as an example: # after mv + ci $ hg status -C -v --rev '.^' # expected to see 'A' and ' ' lines too R dira\dirb\largefile $ hg status -C -v --rev '.^' foo/largefile # no output # expected to see 'A' and ' ' lines only $ hg status -C -v --rev '.^' foo/ # no output # expected to see 'A', ' ' and 'R' lines $ hg status -C -v --rev '.^' ./ # expected to see 'A' and ' ' lines too R dirb\largefile $ hg status -C -v --rev '.^' ../.hglf/dira/foo/largefile A ..\.hglf\dira\foo\largefile ..\.hglf\dira\dirb\largefile # no 'R' expected when new file is specified $ hg status -C -v --rev '.^' ../.hglf # OK A ..\.hglf\dira\foo\largefile ..\.hglf\dira\dirb\largefile R ..\.hglf\dira\dirb\largefile

revset: add explanation about difference between 'filelog()' and 'file()'

hgweb: improve colors for comparison page delete: red -> red insert: green -> yellow change: yellow -> gray

histedit: fix new nodes computation with --continue (issue3534) When running the following actions: pick 617f94f13c0f 1 +4 drop 888f9082bf99 2 +5 fold 251d831eeec5 3 +6 if the fold fails, is fixed by the user with a new changeset, --continue will ignore the new revision when generating the fold changelog. This was caused by --continue detecting new changesets as descendants of the parent not descendants of changesets in the initial list. In this case, dropped changesets must be ignored. Even with the computation fixed, the 'newchildren' list was always emptied by the filtering loop and passed empty to finishfold(). Note that changesets dropped and recreated identically will still be missed. This probably cannot be solved but is unlikely to happen. Other things, like 'newchildren' having multiple heads, should be checked as well.

histedit: end folding message with an LF This is convenient when running tests dumping the editor content, it avoids the following output line to be mixed with histedit message.

merge with i18n

i18n-sv: synchronized with d1b49b02bc16

merge with crew-stable

util: delegate seek and tell methods of atomictempfile

encoding: add fast-path for ASCII uppercase. This copies the performance hack from encoding.lower (c481761033bd). The case-folding logic that kicks in on case-insensitive filesystems hits encoding.upper hard: with a repository with 75k files, the timings went from hg perfstatus ! wall 3.156000 comb 3.156250 user 1.625000 sys 1.531250 (best of 3) to hg perfstatus ! wall 2.390000 comb 2.390625 user 1.078125 sys 1.312500 (best of 5) This is a 24% decrease. For comparison, Mercurial 2.0 gives: hg perfstatus ! wall 2.172000 comb 2.171875 user 0.984375 sys 1.187500 (best of 5) so we're only 10% slower than before we added the extra case-folding logic. The same decrease is seen when executing 'hg status' as normal, where we go from: hg status --time time: real 4.322 secs (user 2.219+0.000 sys 2.094+0.000) to hg status --time time: real 3.307 secs (user 1.750+0.000 sys 1.547+0.000)

encoding: use s.decode to trigger UnicodeDecodeError When calling encode on a str, the string is first decoded using the default encoding and then encoded. So s.encode('ascii') == s.decode().encode('ascii') We don't care about the encode step here -- we're just after the UnicodeDecodeError raised by decode if it finds a non-ASCII character. This way is also marginally faster since it saves the construction of the extra str object.

test-largefiles: fix test failing on vfat file systems The usercache hardlinks files for filesystems that support hardlinks. So when this test is run on a filesystem that supports hardlinking, we have a link in r7 and in the usercache, pointing to the same file contents (4cdac4d8...). vfat does not support hardlinks, the file in the cache and in the store of r7 are thus independent. For the test to pass on vfat, we need to corrupt *both* the largefile in the usercache and in the store of r7. Corrupting only one of them is not sufficient. Fixes: --- /home/buildslave/mercurial/vfat_hg_tests__stable_/build/tests/test-largefiles.t +++ /home/buildslave/mercurial/vfat_hg_tests__stable_/build/tests/test-largefiles.t.err @@ -997,9 +997,11 @@ $ hg push -R r7 http://localhost:$HGPORT1 pushing to http://localhost:$HGPORT1/ searching for changes - remote: largefiles: failed to put 4cdac4d8b084d0b599525cf732437fb337d422a8 into store: largefile contents do not match hash - abort: remotestore: could not put $TESTTMP/r7/.hg/largefiles/4cdac4d8b084d0b599525cf732437fb337d422a8 to remote store http://localhost:$HGPORT1/ (glob) - [255] + searching for changes + remote: adding changesets + remote: adding manifests + remote: adding file changes + remote: added 2 changesets with 2 changes to 2 files $ rm -rf empty Push a largefiles repository to a served empty repository

largefiles: mark as a first party extension

largefiles: ensure addlargefiles() doesn't add a standin as a largefile An easy way to force this (and cause a traceback) prior to the fix for 3507 was $ touch large $ hg add --large large $ hg ci -m "add" $ hg remove large $ touch large $ hg addremove --config largefiles.patterns=**large This patch also detected (and corrected) a previous test where a standin got added as a largefile (without a traceback).

largefiles: fix a traceback when addremove follows a remove (issue3507) The problem only occurred if a file was removed with 'hg rm' (as opposed to the OS utilities), and then addremove was run before a commit. Both normal and large files were affected. Ensuring that the file exists prior to an lstat() for size seems like the Right Thing. But oddly enough, the missing file that was causing lstat() to blow up was a standin when a largefile was removed, which seems fishy, because a standin should never be added as a largefile. I was then able to get a standin added as a largefile (whose name is 'large') with hg addremove --config largefiles.patterns=**large which also causes a backtrace. That will be fixed next.

largefiles: defer lfdirstate.drop() until after commit (issue3364) The example in comment #9 of the bug writeup must be run exactly- it was the commit after the rm and prior to the addremove that screwed things up, because that commit noticed that the largefile was missing, called drop(), and then the original commit function did nothing (due to the file in the '!' state). The addremove command properly put it into the 'R' state, but it remained stuck in that state (because commit insisted 'nothing changed'). Without the commit prior to addremove, the problem didn't occur. Maybe this is an indication that lfdirstate needs to take a few more hints from the regular dirstate, regardless of what _it_ thinks the state is- similar inconsistency is probably still possible with this patch if the original commit succeeds but the lfdirstate write fails.

largefiles: fix addremove with -R option If a file was missing, the missing list contained a path relative to the repo. When building the matcher from that list, the file name ended up concatenated to cwd, causing the command to abort with '<file> not under root'. This rebuilds the missing list with paths relative to cwd.

dispatch: fix traceback when extension was tested with newer versions only The "worst" extension still is the one tested with the lowest tested version below the current version of Mercurial, but if an extension with was only tested with newer versions, it is considered a candidate for a bad extension, too. In this case extensions which have been tested with higher versions of Mercurial are considered better. This allows finding the oldest extension if ct can't be calculated correctly and therefore defaults to an empty tuple, and it involves less changes to the comparison logic during the current code freeze.

test-extension.t: use fixed version string instead of current tag Currently tests break with the current tag being 2.3-rc and tags set by the user could affect this test, too.

Added tag 2.3-rc for changeset a06e2681dd17

merge default into stable for 2.3 code freeze

merge with crew