obsutil: move 'foreground' to the new modules We have a new 'obsutil' module now. We move the high level utility there to bring 'obsolete.py' back to a more reasonable size.

obsutil: move 'allsuccessors' to the new modules We have a new 'obsutil' module now. We move the high level utility there to bring 'obsolete.py' back to a more reasonable size.

obsutil: move 'allprecursors' to the new modules We have a new 'obsutil' module now. We move the high level utility there to bring 'obsolete.py' back to a more reasonable size.

obsutil: move 'exclusivemarkers' to the new modules We have a new 'obsutil' module now. We move the high level utility there to bring 'obsolete.py' back to a more reasonable size.

obsutil: move 'successorssets' to the new modules We have a new 'obsutil' module now. We move this high level utility there to bring 'obsolete.py' back to a more reasonable size.

revlog: add an experimental option to mitigated delta issues (issue5480) The general delta heuristic to select a delta do not scale with the number of branch. The delta base is frequently too far away to be able to reuse a chain according to the "distance" criteria. This leads to insertion of larger delta (or even full text) that themselves push the bases for the next delta further away leading to more large deltas and full texts. This full text and frequent recomputation throw Mercurial performance in disarray. For example of a slightly large repository 280 000 files (2 150 000 versions) 430 000 changesets (10 000 topological heads) Number below compares repository with and without the distance criteria: manifest size: with: 21.4 GB without: 0.3 GB store size: with: 28.7 GB without 7.4 GB bundle last 15 00 revisions: with: 800 seconds 971 MB without: 50 seconds 73 MB unbundle time (of the last 15K revisions): with: 1150 seconds (~19 minutes) without: 35 seconds Similar issues has been observed in other repositories. Adding a new option or "feature" on stable is uncommon. However, given that this issues is making Mercurial practically unusable, I'm exceptionally targeting this patch for stable. What is actually needed is a full rework of the delta building and reading logic. However, that will be a longer process and churn not suitable for stable. In the meantime, we introduces a quick and dirty mitigation of this in the 'experimental' config space. The new option introduces a way to set the maximum amount of memory usable to store a diff in memory. This extend the ability for Mercurial to create chains without removing all safe guard regarding memory access. The option should be phased out when core has a more proper solution available. Setting the limit to '0' remove all limits, setting it to '-1' use the default limit (textsize x 4).

tests: fix variable name regular expression in _genrestoreenv() Update the code to correctly anchor the expression on the end of the name, to require that the entire name match this expression. It was already anchored at the start by using re.match(), but this does not anchor it at the end.

merge with stable

pushrace: avoid crash on bare push when using concurrent push mode If the remote is empty, we do now bother computing head changes and the 'pushbranchmap' attribute stays at None. We now handle and tests this case.

show: config option to register aliases for views As part of using `hg show` in my daily workflow, I've found it slightly annoying to have to type full view names, complete with a space. I've locally registered an alias for "swork = show work." I think others will have this same complaint and could benefit from some automation to streamline the creation of aliases. So, this commit introduces a config option that allows `hg show` views to be automatically aliased using a given prefix. e.g. a value of "s" will automatically register "swork" and "sbookmarks." Multiple values can be given for ultimate flexibility. This arguably isn't needed now. But since we don't register aliases if there will be a collision and we're bound to have a collision, it makes sense to allow multiple prefixes so specific views can avoid collisions by using different prefixes.

blackbox: use a human readable version of the default Now that the default value is also converted we can use a human readable version for it. This will be useful if we start to automatically display the default config value in various place.

configitems: register 'blackbox.maxsize' as an example of 'configbytes' This exercise the default value handling in 'configbytes'.

blackbox: minor code reordering The version declaration should come first in my opinion. This will help gather the command table with the config table.

configitems: add a devel warning for extensions items overiding core one We do not want such case to pass silently. In the future we'll likely have useful tool for an extension to alter the existing definition in core.

configitems: add an official API for extensions to register config item Extensions can have a 'configtable' mapping and use 'registrar.configitem(table)' to retrieve the registration function. This behave in the same way as the other way for extensions to register new items (commands, colors, etc).

configitems: extract the logic to build a registrar on any configtable Having the logic available independently from the mapping used is a necessary step toward extensions support.

obsolete: skip 'changectx' usage in unstable computation We simplify the unstable computation code, skipping the expensive creation of changectx object. We focus on efficient set operation and revnumber centric functions. In my mercurial development repository, this provides a 3x speedup to the function: before: 5.319 ms after: 1.844 ms repo details: total changesets: 40886 obsolete changesets: 7756 mutable (not obsolete): 293 unstable: 30

obsolete: provide a small function to retrieve all mutable revisions More obsolescence related algorithm focus on the mutable revision. We provide a tiny utility function to make it easy to access this set.

bundle2: add debug info about the number of stream params Seems like the %i was never substituted.

bundle2: add some debugging information to the not-a-bundle error I found this useful while trying to debug wireproto-related issues.

tests: more completely restore the environment in syshgenv Update the syshgenv function to attempt to completely restore the original environment, rather than only updating a few specific variables. run_tests.py now generates a shell script that can be used to restore the original environment, and syshgenv sources it. This is a bit more complicated than the previous code, but should do a better job of running the system hg in the correct environment. I've tested it on Linux using python 2.x, but let me know if it causes issues in other environments. I'm not terribly familiar with how the tests get run on Windows, for instance, and how the environment needs to be updated there.

tests: do not use system hg if it does not have "files" command Ancient hg does not have "hg files" so test-check-*.t will fail with "unknown command 'files'": $ hg files hg: unknown command 'files' $ hg --version Mercurial Distributed SCM (version 2.6.2) Test "hg files" and give up using syshg if it does not have "files" command.

rebase: also test abort from pretxnclose error Different hooks will have different properties so we cover more hooks to catch further regressions.

rebase: reinforce testing around precommit hook interrupting a rebase Different hooks will have different properties so we cover more hooks to catch further regression.

rebase: provides test case for (issue5610) The 4.2 release introduces a regression regarding the behavior of rebase with some hook failures. We add the tests from the bug report from Henrik Stuart to our test base to prevent further regression on this.

rebase: backed out changeset cf8ad0e6c0e4 (issue5610) Having a single transaction for rebase means the whole transaction gets rolled back on error. To work around this a small hack has been added to detect merge conflict and commit the work done so far before exiting. This hack works because there is nothing transaction related going on during the merge phase. However, if a hook blocks the rebase to create a changeset, it is too late to commit the work done in the transaction before the problematic changeset was created. This leads to the whole rebase so far being rolled back. Losing merge resolution and other work in the process. (note: rebase state will be fully lost too). Since issue5610 is a pretty serious regression and the next stable release is a couple day away, we are taking the backout route until we can figure out something better to do.

rebase: backed out changeset 2519994d25ca In the process of fixing issue5610 in 4.2.2, we are trying to backout cf8ad0e6c0e4. This changeset is making changes that depend on cf8ad0e6c0e4, so we need to back it out first. Since issue5610 is pretty serious regression and the next stable release is a couple of days away, we are taking the backout route until we can figure out something better to do.

setup: fix runcmd() usage on darwin Fix one invocation of runcmd() that was missed in the recent change to make runcmd() also return the process exit status.

py3: update the python3-whitelist with new tests which pass on Python 3 We have now 34 tests passing on Python 3.

setup: fix localhgenv It should return env as a dict instead of None.

tests: use the system hg for examining the local repository Most test scripts use "hg" to interact with a temporary test repository. However a few tests also want to run hg commands to interact with the local repository containing the mercurial source code. Notably, many of the test-check-* tests want to check local files and commit messages. These tests were previously using the version of hg being tested to query the source repository. However, this will fail if the source repository requires extensions or other settings not supported by the version of mercurial being tested. The source repository was typically initially cloned using the system hg installation, so we should use the system hg installation to query it. There was already a helpers-testrepo.sh script designed to help cope with different requirements for the source repository versus the test repositories. However, it only handled the evolve extension. This new behavior works with any extensions that are different between the system installation and the test installation.

tests: save the original PATH and PYTHONPATH variables When running the tests, define ORIG_PATH and ORIG_PYTHONPATH environment variables that contain the original contents of PATH and PYTHONPATH, before they were modified by run-tests.py This will make it possible for tests to refer to the original contents of these variables if necessary. In particular, this is necessary for invoking the correct version of hg for examining the local repository (the mercurial repository itself, not the temporary test repositories). Various tests examine the local repository to check the file lists and contents of commit messages.

setup: prefer using the system hg to interact with the local repository Add a findhg() function that tries to be smarter about figuring out how to run hg for examining the local repository. It first tries running "hg" from the user's PATH, with the default HGRCPATH settings intact, but with HGPLAIN enabled. This will generally use the same version of mercurial and the same settings used to originally clone the repository, and should have a higher chance of working successfully than trying to run the hg script from the local repository. If that fails findhg() falls back to the existing behavior of running the local hg script.

setup: replace runhg() with an hgcommand helper class Replace the runhg() function with an hgcommand helper class. hgcommand has as run() function similar to runhg(), but no longer requires the caller to pass in the exact path to python and the hg script, and the environment settings for invoking hg. For now this diff contains no behavior changes, but in the future this will make it easier for the hgcommand helper class to more intelligently figure out the proper way to invoke hg.

setup: move environment computation into a helper function Add a helper function to compute the environment used for invoking mercurial, rather than doing this computation entirely at global scope. This will make it easier to do some subsequent refactoring.

setup: update runcmd() to also return the exit status Update the runcmd() helper function so it also returns the process exit status. This allows callers to more definitively determine if a command failed, rather than testing only for the presence of data on stderr. I don't expect this to have any behavioral changes for now: the commands invoked by setup generally should print data on stderr if and only if they failed.

setup: fail if we cannot determine the version number If running hg fails, exit the setup script unsuccessfully, rather than proceeding to use a bogus version of "+0-". Using an invalid version number causes various tests to fail later. Failing early makes it easier to identify the source of the problem. It is currently easy for setup.py to fail this way since it sets HGRCPTH to the empty string before running "hg", which may often disable extensions necessary to interact with the local repository.

smartset: fix generatorset.last() to not return the first element (issue5609)

strip: respect the backup option in stripcallback The backup option was mistakenly ignored. It should be respected. Thanks Martin von Zweigbergk for finding this out!

py3: use pycompat.bytestr() to convert str to bytes

py3: pass the memoryview object into bytes() to get the value

py3: use pycompat.bytestr instead of str

py3: use '%d' to convert integers to bytes

py3: slice over bytes to prevent getting it's ascii value

py3: use pycompat.strkwargs() to convert kwargs keys to str

py3: use r'' to prevent the addition of b'' by transformer There are cases in opts handling in debugcommands.py where we don't need to convert opts keys back to bytes as there are some handful cases and no other function using opts value. Using r'', we prevent the transformer to add a b'' which will keep the value str.

py3: use pycompat.byteskwargs() to convert kwargs' keys to bytes This is used where ever required like where kwargs are passed into ui.formatter(), scmutil.match() or cmdutil.openrevlog() which expects bytes.

tests: use cgienv to minimize environment setup at hgweb tests This patch follows other hgweb tests.