rebase: turn rebase revs into set before filtering obsolete
When the inhibit extension from mutable-history is enabled, it attempts to
iterate over the rebaseset to prevent the nodes being rebased from being
marked obsolete. This happens at the same time as rebase's
_filterobsoleterevs function trying to iterate over the rebaseset to figure
out which ones are obsolete. The two of these iterating over the same
revset generatorset cause a 'generator already executing' exception. This is
probably a flaw in the revset implementation, since iterating over the same
set twice should be supported.
This regression was introduced in
5d16ebe7b14, since it changed
_filterobsoleterevs to be called before the rebaseset was turned into a
set(). For now let’s just make the rebaseset an actual set again before
calling that function. This was caught by the inhibit tests.
The relevant call stack from test-inhibit.t:
File "/tmp/hgtests.jgjrN5/install/lib/python/hgext/rebase.py", line 285, in _preparenewrebase
obsrevs = _filterobsoleterevs(self.repo, rebaseset)
File "/data/hgbuild/facebook-hg-rpms/mutable-history/hgext/inhibit.py", line 197, in _filterobsoleterevswrap
r = orig(repo, rebasesetrevs, *args, **kwargs)
File "/tmp/hgtests.jgjrN5/install/lib/python/hgext/rebase.py", line 1380, in _filterobsoleterevs
return set(r for r in revs if repo[r].obsolete())
File "/tmp/hgtests.jgjrN5/install/lib/python/hgext/rebase.py", line 1380, in <genexpr>
return set(r for r in revs if repo[r].obsolete())
File "/tmp/hgtests.jgjrN5/install/lib/python/mercurial/revset.py", line 3079, in _iterordered
val2 = next(iter2)
File "/tmp/hgtests.jgjrN5/install/lib/python/mercurial/revset.py", line 3417, in gen
yield nextrev()
File "/tmp/hgtests.jgjrN5/install/lib/python/mercurial/revset.py", line 3424, in _consumegen
for item in self._gen:
File "/tmp/hgtests.jgjrN5/install/lib/python/mercurial/revset.py", line 71, in iterate
cl = repo.changelog
File "/tmp/hgtests.jgjrN5/install/lib/python/mercurial/repoview.py", line 319, in changelog
revs = filterrevs(unfi, self.filtername)
File "/tmp/hgtests.jgjrN5/install/lib/python/mercurial/repoview.py", line 261, in filterrevs
repo.filteredrevcache[filtername] = func(repo.unfiltered())
File "/data/hgbuild/facebook-hg-rpms/mutable-history/hgext/directaccess.py", line 65, in _computehidden
hidden = repoview.filterrevs(repo, 'visible')
File "/tmp/hgtests.jgjrN5/install/lib/python/mercurial/repoview.py", line 261, in filterrevs
repo.filteredrevcache[filtername] = func(repo.unfiltered())
File "/tmp/hgtests.jgjrN5/install/lib/python/mercurial/repoview.py", line 175, in computehidden
hideable = hideablerevs(repo)
File "/tmp/hgtests.jgjrN5/install/lib/python/mercurial/repoview.py", line 33, in hideablerevs
return obsolete.getrevs(repo, 'obsolete')
File "/tmp/hgtests.jgjrN5/install/lib/python/mercurial/obsolete.py", line 1097, in getrevs
repo.obsstore.caches[name] = cachefuncs[name](repo)
File "/data/hgbuild/facebook-hg-rpms/mutable-history/hgext/inhibit.py", line 255, in _computeobsoleteset
if getrev(n) not in blacklist:
File "/tmp/hgtests.jgjrN5/install/lib/python/mercurial/revset.py", line 3264, in __contains__
return x in self._r1 or x in self._r2
File "/tmp/hgtests.jgjrN5/install/lib/python/mercurial/revset.py", line 3348, in __contains__
for l in self._consumegen():
File "/tmp/hgtests.jgjrN5/install/lib/python/mercurial/revset.py", line 3424, in _consumegen
for item in self._gen:
ValueError: generator already executing
commandserver: update comment about setpgid
Now setpgid has 2 main purposes: better handling for terminal-generated
SIGTSTP, SIGINT, and process-exit-generated SIGHUP. Update the comment to
explain things more clearly.
chg: forward SIGINT, SIGHUP to process group
These signals are meant to send to a process group, instead of a single
process: SIGINT is usually emitted by the terminal and sent to the process
group. SIGHUP usually happens to a process group if termination of a process
causes that process group to become orphaned.
Before this patch, chg will only forward these signals to the single server
process. This patch changes it to the server process group.
This will allow us to properly kill processes started by the forked server
process, like a ssh process. The behavior difference can be observed by
setting SSH_ASKPASS to a dummy script doing "sleep 100" and then run
"chg push ssh://dest-need-password-auth". Before this patch, the first Ctrl+C
will kill the hg process while ssh-askpass and ssh will remain alive. This
patch will make sure they are killed properly.
Added signature for changeset
519bb4f9d3a4
Added tag 3.9-rc for changeset
519bb4f9d3a4
rbc: fix invalid rbc-revs entries caused by missing cache growth
It was in some cases possible to end up writing to the cache file without
growing it first. The range assignment in _setcachedata would append instead of
writing at the requested position and thus write the new record in the wrong
place.
To fix this, we avoid looking up in too small caches, and when growing the
cache, do it right before writing the new record to it so we know it has been
done correctly.
chg: handle EOF reading data block
We recently discovered a case in production that chg uses 100% CPU and is
trying to read data forever:
recvfrom(4, "",
1814012019, 0, NULL, NULL) = 0
Using gdb, apparently readchannel() got wrong data. It was reading in an
infinite loop because rsize == 0 does not exit the loop, while the server
process had ended.
(gdb) bt
#0 ... in recv () at /lib64/libc.so.6
#1 ... in readchannel (...) at /usr/include/bits/socket2.h:45
#2 ... in readchannel (hgc=...) at hgclient.c:129
#3 ... in handleresponse (hgc=...) at hgclient.c:255
#4 ... in hgc_runcommand (hgc=..., args=<optimized>, argsize=<optimized>)
#5 ... in main (argc=...
486922636, argv=..., envp=...) at chg.c:661
(gdb) frame 2
(gdb) p *hgc
$1 = {sockfd = 4, pid = 381152, ctx = {ch = 108 'l',
data = 0x
7fb05164f010 "st):\nTraceback (most recent call last):\n"
"Traceback (most recent call last):\ne", maxdatasize =
1814065152,"
" datasize =
1814064225}, capflags = 16131}
This patch addresses the infinite loop issue by detecting continuously empty
responses and abort in that case.
Note that datasize can be translated to ['l', ' ', 'l', 'a']. Concatenate
datasize and data, it forms part of "Traceback (most recent call last):".
This may indicate a server-side channeledoutput issue. If it is a race
condition, we may want to use flock to protect the channels.
sslutil: more robustly detect protocol support
The Python ssl module conditionally sets the TLS 1.1 and TLS 1.2
constants depending on whether HAVE_TLSv1_2 is defined. Yes, these
are both tied to the same constant (I would think there would be
separate constants for each version). Perhaps support for TLS 1.1
and 1.2 were added at the same time and the assumption is that
OpenSSL either has neither or both. I don't know.
As part of developing this patch, it was discovered that Apple's
/usr/bin/python2.7 does not support TLS 1.1 and 1.2 (only TLS 1.0)!
On OS X 10.11, Apple Python has the modern ssl module including
SSLContext, but it doesn't appear to negotiate TLS 1.1+ nor does
it expose the constants related to TLS 1.1+. Since this code is
doing more robust feature detection (and not assuming modern ssl
implies TLS 1.1+ support), we now get TLS 1.0 warnings when running
on Apple Python. Hence the test changes.
I'm not super thrilled about shipping a Mercurial that always
whines about TLS 1.0 on OS X. We may want a follow-up patch to
suppress this warning.