test-convert-cvs: add sleep so cvs notices changes This change makes the test pass on gcc112.fsffrance.org.

cvsps: fix computation of parent revisions when log caching is on cvsps computes the parent revisions of log entries by walking the cvs log sorted by (rcs, revision) and by iteratively maintaining a 'versions' dictionary which maps a (rcs, branch) pair onto the last revision seen for that pair. When log caching is on and a log cache exists, cvsps fails to set the parent revisions of new log entries because it does not iterate over the log cache in the parents computation. A complication is that a file rcs can change (move to/from the attic), with respect to its value in the log cache, if the file is removed/added back. This patch adds an iteration over the log cache to update the rcs of cached log entries, if changed, and to properly populate the 'versions' dictionary.

dirstate: batch calls to statfiles (issue4878) This makes it more interruptible.

parsers: fix infinite loop or out-of-bound read in fm1readmarkers (issue4888) The issue4888 was caused by 0-length obsolete marker. If msize is zero, fm1readmarkers() never ends. This patch adds several bound checks to fm1readmarker(). Therefore, 0-length and invalid-size marker should be rejected.

parsers: read sizes of metadata pair of obsolete marker at once This will make it easy to implement bound checking. Currently fm1readmarker() has no protection for corrupted obsstore and can cause infinite loop or out-of-bound reads.

filemerge: clean up temp files in a finally block This isn't really a big deal because the temp files are created in $TMPDIR, but it makes some upcoming work simpler.

check-code: detect and ban 'util.Abort' We have seen the light, please use the new way.

error: get Abort from 'error' instead of 'util' The home of 'Abort' is 'error' not 'util' however, a lot of code seems to be confused about that and gives all the credit to 'util' instead of the hardworking 'error'. In a spirit of equity, we break the cycle of injustice and give back to 'error' the respect it deserves. And screw that 'util' poser. For great justice.

eol: rename 'error' to 'haserror' The variable 'error' conflict with the module name that we would like to import and use in a coming changeset.

discovery: rename 'error' to 'errormsg' The variable 'error' conflict with the module name that we would like to import and use in a coming changeset.

histedit: delete histedit statefile on any exception during abort When an user aborts a histedit, many things could go wrong. At a minimum, after a histedit abort failure, their repository should be out of that state. We've found situations where the user could not exit the histedit state without manually deleting the histedit state file. This patch ensures that if any exception happens during an abort, the histedit statefile will be deleted so that users are out of the histedit state and can at least manually get the repo back to a workable condition.

histedit: check presence of statefile before deleting it When the histeditstate class instance has it's clear() method called, there is nothing to check to see if the state file exists before deleting it. It may not exist, which would create an exception. This patch allows clear to be called at any time. This will be needed for the following patch.

histedit: add inprogress method to state class If a histedit is progress, the 'histedit-state' file should exist. The patch implements a convenience function to do check if a histedit is in progress. This method will be use in next patch in the series.

commands: use dirstateguard instead of begin/end-parentchange for backout Before this patch, "hg backout" uses 'begin'/'end'-'parentchange()' of 'dirstate' class to avoid writing incomplete dirstate changes out at failure. But this framework doesn't work as expected, if 'dirstate.write()' is invoked between them. In fact, in-memory dirstate changes may be written out at 'repo.status()' implied by 'merge.update()', even before this patch. To restore dirstate as expected at failure of "hg backout", this patch uses 'dirstateguard' instead of 'begin'/'end'-'parentchange()'.

commands: make "hg import" use dirstateguard only for --no-commit Previous patch made dirstate changes in a transaction scope "all or nothing". Therefore, 'dirstateguard' is meaningless, if its scope is as same as one of the related transaction. Before this patch, "hg import" uses 'dirstateguard' always, but transaction is also started if '--no-commit' isn't specified. To avoid redundancy, this patch makes "hg import" use dirstateguard only if transaction isn't started (= '--no-commit' is specified). In this patch, 'if dsguard' can be examined safely, because 'dsguard' is initialized (with None) before outermost 'try'.

cmdutil: stop tryimportone from using dirstateguard (BC) There is no user of 'cmdutil.tryimportone()' other than 'commands.import_()', which can restore dirstate at failure of applying patches by transaction or dirstateguard. Therefore, it is reasonable to stop 'tryimportone()' from using redundant 'dirstateguard', even though it changes behavior of 'tryimportone()'. After this patch, 3rd party extensions should use 'dirstateguard' or so explicitly, if they want to restore dirstate at failure of importing a patch.

dirstate: remove meaningless dirstateguard Previous patch made dirstate changes in a transaction scope "all or nothing". Therefore, 'dirstateguard' is meaningless, if its scope is as same as one of the related transaction. This patch removes such meaningless 'dirstateguard' usage.

localrepo: execute appropriate actions for dirstate at releasing transaction Before this patch, in-memory dirstate changes are still kept over a transaction scope boundary regardless of the result of it. For "all or nothing" policy of the transaction, in-memory dirstate changes should be: - written out at successful closing a transaction, because subsequent 'dirstate.invalidate()' can lose them - discarded at failure of a transaction, because outer 'wlock.release()' or so may write them out To discard all changes in a transaction completely, this patch also restores '.hg/dirstate' by '.hg/journal.dirstate' at failure, because 'transaction' itself does nothing for files related to '.hg/journal.*' in such case (therefore, renaming in this patch is safe enough). This is a part of preparations for "transactional dirstate". See also the wiki page below for detail about it. https://mercurial.selenic.com/wiki/DirstateTransactionPlan This patch also removes redundant 'dirstate.invalidate()' just before aborting a transaction for shelve/unshelve.

transaction: add releasefn to notify the end of a transaction scope 'releasefn' is used by subsequent patch, to do appropriate action according to the result of it at the end of a transaction scope. To ensure that 'releasefn' is invoked only once, this patch invokes it after assignment 'self.journal = None', because such assignment prevents from invoked 'transaction._abort()' again via '__del__()'. def __del__(self): if self.journal: self._abort()

filemerge: move post-merge checks into a separate function This makes the overall filemerge function easier to follow, and makes upcoming work simpler.

filemerge._xmerge: drop no longer necessary 'if r:' check Cleanup from an earlier patch to make premerge be directly called from the main filemerge function.

filemerge._idump: drop no longer necessary 'if r:' check Cleanup from an earlier patch to make premerge be directly called from the main filemerge function.

filemerge._merge: drop no longer necessary 'if r:' check Cleanup from an earlier patch to make premerge be directly called from the main filemerge function.

revset: delete _updatedefaultdest as it has no users The revset is not used anywhere anymore. We delete the function until we use (and therefore test it again).

merge: get the default update destination from the function There is no value in using the revset instead of the extracted function.

update: move default destination computation to a function We ultimately want this to be accessible through a revset, but there is too much complexity here for that to work. Especially we'll have to return more than just the destination to control the behavior (eg: bookmarks to activate, etc). To prevent cycle, a new module is created, it will receive other destination/behavior function in the future.

worker: restore old countcpus code (issue4869) This is a backout of d29859cfcfc2. The stdlib implementation of multiprocessing.cpu_count() attempts to invoke a process on BSD and Darwin platforms (at least on 2.7). Under certain conditions (such as cwd being removed) this could raise. Our old code was silently catching the exception. The old code was more robust, so restore it.

filemerge: call premerge directly from main merge function The merge code currently does (in pseudocode): for f in tomerge: premerge f merge f We'd like to change this to look more like: for f in tomerge: premerge f for f in tomerge: merge f This makes sure as many files are resolved as possible before prompting for the others. This restructuring is also necessary for custom merge drivers. This function separates out the premerge step from the merge step. In future patches we'll actually turn these into separate steps in the merge driver. The 'if r:' occurrences will be cleaned up in subsequent patches.

bundle2: allow lazily acquiring the lock In the external pushrebase extension, it is valuable to be able to do some work without taking the lock (like running expensive hooks). This enables significantly higher commit throughput. This patch adds an option to lazily acquire the lock. It means that all bundle2 part handlers that require writing to the repo must first call op.gettransction(), when in this mode.

bundle2: add op.gettransaction() to handlers that need the lock A future patch will allow the bundle2 lock be taken lazily. We need to introduce transaction-gets to each handler that needs the lock. The tests caught these issues when I added lazy locking.