revert: makes interactive mode ask to forget added files (issue4936) Before this patch revert interactive mode unconditionally forgets added files. This patch fixes this by asking user if he wants to forget added file. If user doesn't want to forget given file, it is added to matcher_opts exclude list, to not reviewing it later with other modified files.

obsolete: fix n^2 marker computation behavior Previously, if you ran obsolete.createmarkers with a bunch of markers that did not have successors (like when you do a prune), it encountered a n^2 computation behavior because the loop would read the changelog (to get ctx.parents()), then add a marker, in a loop. Adding a marker invalidated the computehidden cache, and reading the changelog recomputed it. This resulted in pruning 150 commits taking 150+ seconds in a large repo. The fix is to break the reading part of the loop to be separate from the writing part.

memctx: fix memctx manifest file hashes When memctx is asked for a manifest, it constructs one by merging the p1 manifest, and the changes that are on top. For the changes on top, it was previously using p1.node() as the file entries parent, which actually returns the commit node that the p1 linkrev points at! Which is entirely incorrect. The fix is to use p1.filenode() instead, which returns the parent file node as desired. I don't know how to execute this or make it have a visible effect, so I'm not sure how to test it. It was noticed because asking for the linkrev is an expensive operation when using the remotefilelog extension and this was causing performance regressions with commit.

schemes: add debugexpandscheme command, resolving a scheme to canonical form

schemes: extract scheme expansion as its own method on ShortRepository

merge with stable

Added signature for changeset b698abf971e7

Added tag 3.7.1 for changeset b698abf971e7

rebase: don't preserve most extra fields This backs out changeset 88fde8db5307. See the previous patches for why.

rebase: backout changeset d755a9531fce This is a dependency for a future backout of 88fde8db5307. See the previous patches for why.

rebase: backout changeset 986d04b9fedd This is a dependency for a future backout of 88fde8db5307. See the previous patches for why.

graft: don't preserve most extra fields This backs out changeset 804abe8999f3. See the previous patch for why we're doing this.

amend: don't preserve most extra fields This backs out changeset 39163708825cd. There are some extra fields that absolutely should not be preserved, like the convert_revision field introduced by the convert and hgsubversion extensions. The problem with extensions blacklisting certain extra fields is that they might not be enabled at the time the amend is performed. In the long run we probably want separately marked transferable and non-transferable extra fields, but for now restore the old Mercurial 3.6 behavior.

histedit: fix typo in documentation

osutil: do not abort loading pure module just because libc has no recvmsg() On Solaris, recvmsg() is provided by libsocket.so. We could try hard to look for the library which provides 'recvmsg' symbol, but it would make little sense now since recvfds() won't work anyway on Solaris. So this patch just disables _recvmsg() on such platforms. Thanks to FUJIWARA Katsunori for spotting this problem.

osutil: disable compilation of recvfds() on unsupported platforms It appears that Solaris doesn't provide CMSG_LEN(), msg_control, etc. As recvfds() is only necessary for chg, this patch just drops it if CMSG_LEN isn't defined, which is the same workaround as Python 3.x. https://hg.python.org/cpython/rev/c64216addd7f#l7.33

i18n-pt_BR: synchronized with 0ec12435b78b

merge with stable

Added signature for changeset 2408645de650

Added tag 3.7 for changeset 2408645de650

merge with i18n

verify: recover lost freeing of memory In df8973e1fb45 (verify: move file cross checking to its own function, 2016-01-05), "mflinkrevs = None" was moved into function, so the reference was cleared there, but the calling function now held on to the variable. The point of clearing it was presumably to free up memory, so let's move the clearing to the calling function where it makes a difference. Also change "mflinkrevs = None" to "del mflinkrevs", since the comment about scope now surely is obsolete.

rebase: better way to detect non-detaching revisions (issue5044) Rather than look for the lowest revision, see if the rebase state is tracking the parents of this revision. Otherwise we can't handle multiple revisions in one rebase that includes a merge revision. Fixes issue5044.

i18n-ja: synchronized with 88609cfa3745

i18n-pt_BR: synchronized with f0d3c5794380

doc: itemize text blocks to increase readability in HTML format Before this patch, text blocks changed in this patch are shown as just continuous text blocks like below in HTML format. Global configuration like the username setting is typically put into: %USERPROFILE%\mercurial.ini $HOME/.hgrc This patch itemizes these text blocks to increase readability in HTML format. Global configuration like the username setting is typically put into: - %USERPROFILE%\mercurial.ini (on Windows) - $HOME/.hgrc (on Unix, Plan9) Like as other platform sensitive container-ed text blocks, this patch also adds explicit "on PLATFORM" information to each items for readability in HTML format, even though output of "hg help config" on command line seems a little redundant. For example, on Unix: Global configuration like the username setting is typically put into: - "$HOME/.hgrc" (on Unix, Plan9)

doc: use correct indentation for enumeration This creates hg.1.html as expected.

doc: use correct cross reference in help documentation This patch fixes problems below: - ":hg:" role should be followed by not '"' but '`' - there is a help topic not "default-push" but "config.default-push"

doc: prevent literal text block from being treated as non-literal one This creates hg.1.html as expected.

doc: prevent non-literal text block from being treated as literal one This creates hg.1.html as expected.

histedit: show correct hash ID at verification error node.short() on 'ha' in verifyactions() causes broken hash ID, because it is initialized with node.hex()-ed node value.

backout: disable --merge with --no-commit (issue4874) Because "backout --merge" have to make a commit before merging, it doesn't work with --no-commit. We could change "backout --merge" to make a merge commit automatically, and --no-commit to bypass a merge commit, but that change would be undesirable because: a) it's hard to fix bad merges in general b) two commits would be created with the same --message So, this patch simply disables "--merge --no-commit".

changegroup: fix pulling to treemanifest repo from flat repo (issue5066) In c0f11347b107 (changegroup: don't support versions 01 and 02 with treemanifests, 2016-01-19), I stopped supporting use of cg1 and cg2 with treemanifest repos. What I had not considered was that it's perfectly safe to pull *to* a treemanifest repo using any changegroup version. As reported in issue5066, I therefore broke pull from old repos into a treemanifest repo. It was not covered by the test case, because that pulled from a local repo while enabling treemanifests, which enabled treemanifests on the source repo as well. After switching to pulling via HTTP, it breaks. Fix by splitting up changegroup.supportedversions() into supportedincomingversions() and supportedoutgoingversions().

tests: minor cleanup to treemanifest test

merge: don't try to merge subrepos twice (issue4988) In my patch series ending with rev 25e4b2f000c5 I switched most change/delete conflicts to be handled at the resolve layer. .hgsubstate was the one file that we weren't able to handle, so we kept the old code path around for it. The old code path added .hgsubstate to one of the other lists as the user specifies, including possibly the 'g' list. Now since we did this check after converting the actions from being keyed by file to being keyed by action type, there was nothing that actually removed .hgsubstate from the 'cd' or 'dc' lists. This meant that the file would eventually make its way into the 'mergeactions' list, now freshly augmented with 'cd' and 'dc' actions. We call subrepo.submerge for both 'g' actions and merge actions. This means that if the resolution to an .hgsubstate change/delete conflict was to add it to the 'g' list, subrepo.submerge would be called twice. It turns out that this doesn't cause any adverse effects on Linux due to caching, but apparently breaks on other operating systems including Windows. The fix here moves this to before we convert the actions over. This ensures that it .hgsubstate doesn't make its way into multiple lists. The real fix here is going to be: (1) move .hgsubstate conflict resolution into the resolve layer, and (2) use a real data structure for the actions rather than shuffling data around between lists and dictionaries: we need a hash (or prefix-based) index by file and a list index by action type. There's a very tiny behavior change here: collision detection on case-insensitive systems will happen after this is resolved, not before. I think this is the right change -- .hgsubstate could theoretically collide with other files -- but in any case it makes no practical difference. Thanks to Yuya Nishihara for investigating this.

bookmarks: improve documentation for --rev option

merge: undocument checkunknown and checkignored configs for 3.7 We've discovered an issue with this flag during certain kinds of rebases. When: (1) we're rebasing while currently on the destination commit, and (2) an untracked or ignored file F is currently in the working copy, and (3) the same file F is in a source commit, and (4) F has different contents in the source commit, then we'll try to merge the file rather than overwrite it. An earlier patch I sent honored the options for these situations as well. Unfortunately, rebases go through the same flow as the old, deprecated 'hg merge --force'. We'd rather not make any changes to 'hg merge --force' behavior, and there's no way from this point in the code to figure out whether we're in 'hg rebase' or 'hg merge --force'. Pierre-Yves David and I came up with the idea to split the 'force' flag up into 'force' for rebases, and 'forcemerge' for merge. Since this is a very disruptive change and we're in freeze mode, simply undocument the options for this release so that our hands aren't tied by BC concerns. We'll redocument them in the next release.

commands: advance current active bookmark at pull --update correctly Before this patch, "hg pull --update" doesn't advance current active bookmark correctly, if pulling itself doesn't advance it, even though "hg pull" + "hg update" does so. Existing test for "pull --update works the same as pull && update" in test-bookmarks.t doesn't examine this case, because pulling itself advance current active bookmark before actual updating the working directory in that test case. To advance current active bookmark at "hg pull --update" correctly, this patch examines 'movemarkfrom' instead of 'not checkout'. Even if 'not checkout' at the invocation of postincoming(), 'checkout' is overwritten by "the revision to update to" value returned by destutil.destupdate() in such case. Therefore, 'not checkout' condition means "update destination is revision #0", and isn't suitable for examining whether active bookmark should be advanced. Even though examination around "movemarkfrom == repo['.'].node()" may seem a little redundant just for this issue, this makes it easier to compare (and unify in the future, maybe) with the same logic to update bookmark at "hg update" below. if not ret and movemarkfrom: if movemarkfrom == repo['.'].node(): pass # no-op update elif bookmarks.update(repo, [movemarkfrom], repo['.'].node()): ui.status(_("updating bookmark %s\n") % repo._activebookmark) else: # this can happen with a non-linear update ui.status(_("(leaving bookmark %s)\n") % repo._activebookmark) bookmarks.deactivate(repo)

largefiles: prevent committing a missing largefile Previously, if the largefile was deleted at the time of a commit, the standin was silently not updated and its current state (possibly garbage) was recorded. The test makes it look like this is somewhat of an edge case, but the same thing happens when an `hg revert` followed by `rm` changes the standin. Aside from the second invocation of this in lfutil.updatestandinsbymatch() (which is what triggers this test case), the three other uses are guarded by dirstate checks for added or modified, or an existence check in the filesystem. So aborting in lfutil.updatestandins() should be safe, and will avoid silent skips in the future if this is used elsewhere.

changegroup: fix treemanifest exchange code (issue5061) There were two mistakes: one was accidental reuse of the fclnode variable from the loop gathering file nodes, and the other (masked by that bug) was not correctly handling deleted directories. Both cases are now fixed and the test passes.

log: speed up single file log with hidden revs (issue4747) On repos with lots of heads, the filelog() code could spend several minutes decompressing manifests. This change instead tries to efficiently scan the changelog for candidates and decompress as few manifests as possible. This is a regression introduced in 3.3 by the linkrev adjustment code. Prior to that, filelog was nearly instant. For the repo in the bug report, this improves time of a simple log command from ~3 minutes to ~.5 seconds, a 360x speedup. For the main Mercurial repo, a log of commands.py slows down from 1.14s to 1.45s, a 27% slowdown. This is still faster than the file() revset, which takes 2.1 seconds.

largefiles: report the missing file count after a commit that does nothing This is the same warning that is printed for normal files.

commit: factor the post commit status check into a cmdutil method The largefiles extension needs to set lfstatus for this status call. Otherwise, if a missing largefile is explicitly named, a confusing message is issued that says the largefile wasn't found, followed by another that says nothing changed.

largefiles: fix an explicit largefile commit after a remove (issue4969) The change in b68797f244e4 to handle a normal -> largefile switch was too aggressive in preserving the original matcher names. If a largefile is explicitly provided by the user, but only the standin exists in dirstate, then only the standin can be committed. There's still maybe an issue when the largefile is deleted outside of Mercurial: $ rm large $ hg ci -m "oops" large large: The system cannot find the file specified nothing changed [1]

context: back out sneaky code change in documentation change In 81b391a45264 (context: clarify why we don't compare file contents when nodeid differs, 2016-01-12), I also changed "node2 != _newnode" into "self.rev() is not None". I don't remember why. They are similar, but the former also catches the case where the file is clean in the dirstate (so node2 is not _newnode), but different from the "other" context. This resulted in unnecessary file content comparison a few lines further down in the code. Let's just back out the code change. Thanks to Durham Goode for spotting this.

templater: abort if infinite recursion detected while compiling In this case, a template is parsed recursively with no thunk for lazy evaluation. This patch prevents recursion by putting a dummy of the same name into a cache that will be referenced while parsing if there's a recursion. changeset = {files % changeset}\n ~~~~~~~~~ = [(_runrecursivesymbol, 'changeset')]

templater: abort if infinite recursion detected while evaluation (issue4758) It would be nice if we could detect recursion at the parsing phase, but we can't because a template can refer to a keyword of the same name. For example, "rev = {rev}" is valid if rev is a keyword, and we don't know if rev is a keyword or a template while parsing.

exchange: set 'treemanifest' param on pushed changegroups too In 5c0fd878779c (treemanifests: set bundle2 part parameter indicating treemanifest, 2016-01-08), I didn't realize I had to set the parameter separately for getbundle and unbundle. Having the parameter there on push allows us to push to an empty repo and have the requirements updated correctly.

crecord: fix help bar display issue (issue5063) Before this patch, the help bar in crecord wouldn't be printed correctly when the terminal window didn't have enough column to display it. This patch adds logic to make sure that the help bar message is always displayed. We use an ellipsis when it is not possible to display the complete message.

crecord: fix typo in the help text In the crecord help dialog, the toggle all option was wrongfully documented. Instead of using 'a', one must use 'A' to toggle all the hunks. The crecord header that is always displayed on the screen contains the right shortcut and does not need to be changed.

subrepo: better error messages in _ensuregit This patch improves the error messages raised when an OSError occurs, since simply re-raising the exception can be both confusing and misleading. For example, if "hg identify" is run inside a repository that contains a Git subrepository and the git binary could not be found, it'll exit with the message "abort: No such file or directory". That implies "identify" has a problem reading the repository itself. There's no way for the user to know what the real problem is unless they dive into the Mercurial source, which is what I ended up doing after spending hours debugging errors while provisioning a VM with Ansible (turns out I forgot to install Git on it). Descriptive errors are especially important on Windows, since it's common for Windows users to forget to set the "Path" system variable after installing Git.

hgweb: update canvas.width before dynamically redrawing graph (issue2683) After 91ac8cb79125 graph canvas width is decided once on the initial rendering. However, after graph page gets scrolled down to load more, it might need more horizontal space to draw, so it needs to resize the canvas dynamically. The exact problem that this patch solves can be seen using: hg init testfork cd testfork echo 0 > foo hg ci -Am0 echo 1 > foo hg ci -m1 hg up 0 echo 2 > foo hg ci -m2 hg gl -T '{rev}\n' @ 2 | | o 1 |/ o 0 hg serve And then by navigating to http://127.0.0.1:8000/graph/tip?revcount=1 "revcount=1" makes sure the initial graph contains only revision 2. And because the initial canvas width takes only that one revision into count, after the (immediate) AJAX update revision 1 will be cut off from the graph. We can safely set canvas width to the new value we get from the AJAX request because every time graph is updated, it is completely redrawn using all the requested nodes (in the case above it will use /graph/2?revcount=61), so the value is guaranteed not to decrease. P.S.: Sorry for parsing HTML with regexes, but I didn't start it.

run-tests: "fix" race condition in race condition fix Laurent's commit 3203dfe341f9 still suffers from a race: by the time the "job" function tries to assign to channels[channel], that list has been truncated to empty. The result is that every job thread raises an IndexError. Earlier, I tried an approach of correctly locking channels, but that caused run-tests to hang on KeyboardInterrupt sometimes. This approach is strictly hackier, but seems to actually work reliably.

rebase: restore help for rebase w/o args (issue5059) Restoring documentation accidentally removed in a9a047878e14.

shelve: use cg3 for treemanifests Similar to previous change, this teaches shelve to pick the right changegroup version for repos that use treemanifests.

repair: use cg3 for treemanifests The newly created helper changegroup.safeversion() knows to pick version 03 if the repo uses treemanifests, so just using that means we pick the right changegroup version.

changegroup: introduce safeversion() In a few places (at least repair.py and shelve.py), we want to find the best changegroup version that we can assume users of the repo will understand. For example, we choose version 01 by default, but if it's a generaldelta repo, we expect clients to support version 02 anyway, so we choose that for new bundles (for e.g. "hg strip"). Let's create a helper for this functionality in changegroup, so we can reuse it elsewhere later.

changegroup: don't support versions 01 and 02 with treemanifests Since it would be terribly expensive to convert between flat manifests and treemanifests, we have decided to simply not support changegroup version 01 and 02 with treemanifests. Therefore, let's stop announcing that we support these versions on treemanifest repos. Note that this means that older clients that try to clone from a treemanifest repo will fail. What happens is that the server, after this patch, finds that there are no common versions and raises "ValueError: no common changegroup version". This results in "abort: HTTP Error 500: Internal Server Error" on the client. Before this patch, it was no better: The server would instead find that there were directory manifest nodes to put in the changegroup 01 or 02 and raise an AssertionError on changegroup.py#668 (assert not tmfnodes), which would also appear as a 500 to the client.

run-tests: fix crash when --json and --blacklist are both used (issue5050) This patch fixes a crash when both --json and --blacklist were given as arguments of run-tests.py. Now, instead of crashing, we add an entry for blacklisted tests in the json output to show that the tests were skipped.

run-tests: fix race condition Before this patch, it was possible for run-tests to crash on a race condition. The race condition happens in the following case: - the last test finishes and calls: done.put(None) - the context switches to the main thread that clears the channels list - the context switches to the last test mentioned above, it tries to access channels[channel] and crashes This happened to me while running run-tests. This patch fixes the issue by clearing the channel before considering that the test is done.