py3: fix integer formatting in bisect error

py3: silence f.write() in test-annotate.t

xdiff: resolve signed unsigned comparison warning Since the value won't be changed inside the code (because context lines feature was removed by D2705), let's just remove the variable and inline the 0 value. The code might be potentially further simplified. But I'd like to make sure correctness is easily verifiable in this patch. Differential Revision: https://phab.mercurial-scm.org/D2766

xdiff: use int64 for hash table size Follow-up of the previous "long" -> "int64" change. Now xdiff only uses int for return values and small integers (ex. booleans, shifting score, bits in hash table size, etc) so it should be able to handle large input. Differential Revision: https://phab.mercurial-scm.org/D2765

xdiff: remove unused xpp and xecfg parameters They are unused. Thus removed. Differential Revision: https://phab.mercurial-scm.org/D2764

xdiff: remove unused flags parameter After D2683, the flags parameter in some functions is no longer needed. Thus removed. Differential Revision: https://phab.mercurial-scm.org/D2763

xdiff: replace {unsigned ,}long with {u,}int64_t MSVC treats "long" as 4-byte. That could cause overflows since the xdiff code uses "long" in places where "size_t" or "ssize_t" should be used. Let's use explicit 8 byte integers to avoid FWIW git avoids that overflow by limiting diff size to 1GB [1]. After examining the code, I think the remaining risk (the use of "int") is low since "int" is only used for return values and hash table size. Although a wrong hash table size would not affect the correctness of the code, but that could make the code extremely slow. The next patch will change hash table size to 8-byte integer so the 1GB limit is unlikely needed. This patch was done by using `sed`. [1]: https://github.com/git/git/commit/dcd1742e56ebb944c4ff62346da4548e1e3be67 Differential Revision: https://phab.mercurial-scm.org/D2762

xdiff: add comments for fields in xdfile_t This makes the related code easier to understand. Differential Revision: https://phab.mercurial-scm.org/D2685

xdiff: add a preprocessing step that trims files xdiff has a `xdl_trim_ends` step that removes common lines, unmatchable lines. That is in theory good, but happens too late - after splitting, hashing, and adjusting the hash values so they are unique. Those splitting, hashing and adjusting hash values steps could have noticeable overhead. Diffing two large files with minor (one-line-ish) changes are not uncommon. In that case, the raw performance of those preparation steps seriously matter. Even allocating an O(N) array and storing line offsets to it is expensive. Therefore my previous attempts [1] [2] cannot be good enough since they do not remove the O(N) array assignment. This patch adds a preprocessing step - `xdl_trim_files` that runs before other preprocessing steps. It counts common prefix and suffix and lines in them (needed for displaying line number), without doing anything else. Testing with a crafted large (169MB) file, with minor change: ``` open('a','w').write(''.join('%s\n' % (i % 100000) for i in xrange(30000000) if i != 6000000)) open('b','w').write(''.join('%s\n' % (i % 100000) for i in xrange(30000000) if i != 6003000)) ``` Running xdiff by a simple binary [3], this patch improves the xdiff perf by more than 10x for the above case: ``` # xdiff before this patch 2.41s user 1.13s system 98% cpu 3.592 total # xdiff after this patch 0.14s user 0.16s system 98% cpu 0.309 total # gnu diffutils 0.12s user 0.15s system 98% cpu 0.272 total # (best of 20 runs) ``` It's still slightly slower than GNU diffutils. But it's pretty close now. Testing with real repo data: For the whole repo, this patch makes xdiff 25% faster: ``` # hg perfbdiff --count 100 --alldata -c d334afc585e2 --blocks [--xdiff] # xdiff, after ! wall 0.058861 comb 0.050000 user 0.050000 sys 0.000000 (best of 100) # xdiff, before ! wall 0.077816 comb 0.080000 user 0.080000 sys 0.000000 (best of 91) # bdiff ! wall 0.117473 comb 0.120000 user 0.120000 sys 0.000000 (best of 67) ``` For files that are long (ex. commands.py), the speedup is more than 3x, very significant: ``` # hg perfbdiff --count 3000 --blocks commands.py.i 1 [--xdiff] # xdiff, after ! wall 0.690583 comb 0.690000 user 0.690000 sys 0.000000 (best of 12) # xdiff, before ! wall 2.240361 comb 2.210000 user 2.210000 sys 0.000000 (best of 4) # bdiff ! wall 2.469852 comb 2.440000 user 2.440000 sys 0.000000 (best of 4) ``` [1]: https://phab.mercurial-scm.org/D2631 [2]: https://phab.mercurial-scm.org/D2634 [3]: ``` // Code to run xdiff from command line. No proper error handling. #include <stdlib.h> #include <unistd.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include "mercurial/thirdparty/xdiff/xdiff.h" #define ensure(x) if (!(x)) exit(255); mmfile_t readfile(const char *path) { struct stat st; int fd = open(path, O_RDONLY); fstat(fd, &st); mmfile_t file = { malloc(st.st_size), st.st_size }; ensure(read(fd, file.ptr, st.st_size) == st.st_size); close(fd); return file; } int main(int argc, char const *argv[]) { mmfile_t a = readfile(argv[1]), b = readfile(argv[2]); xpparam_t xpp = {0}; xdemitconf_t xecfg = {0}; xdemitcb_t ecb = {0}; xdl_diff(&a, &b, &xpp, &xecfg, &ecb); return 0; } ``` Differential Revision: https://phab.mercurial-scm.org/D2686

transaction: add a name and a __repr__ implementation (API) This has been useful for me for debugging. Differential Revision: https://phab.mercurial-scm.org/D2758

phabricator: update doc string for deprecated token argument Differential Revision: https://phab.mercurial-scm.org/D2755

phabricator: print deprecation warning only once Differential Revision: https://phab.mercurial-scm.org/D2754

tests: add a few tests involving --collapse and rebase.singletransaction=1 I'm about to change the rebase code quite a bit and this was poorly tested. Differential Revision: https://phab.mercurial-scm.org/D2757

tests: simplify test-rebase-transaction.t The file was extracted from test-rebase-base.t in 8cef8f7d51d0 (test-rebase-base: clarify it is about the "--base" flag, 2017-10-05). This patch follows up that and clarifies the new file's purpose and simplifies it a bit. Differential Revision: https://phab.mercurial-scm.org/D2756

hgweb: parse and store HTTP request headers WSGI transmits HTTP request headers as HTTP_* environment variables. We teach our parser about these and hook up a dict-like data structure that supports case insensitive header manipulation. Differential Revision: https://phab.mercurial-scm.org/D2742

wireprotoserver: remove broken optimization for non-httplib client There was an experimental non-httplib client in core for several years. It was removed a week or so ago. We kept the optimization for this client in the server code. I'm not sure if that was intended or not. But it doesn't matter: the code was wrong. Because the code was accessing a WSGI environment dict, it needed to access the HTTP_X_HGHTTP2 key to actually read the HTTP header. So the code deleted by this commit wasn't actually doing anything meaningful. Doh. Differential Revision: https://phab.mercurial-scm.org/D2741

wireprotoserver: move all wire protocol handling logic out of hgweb Previous patches from several days ago worked to isolate processing of HTTP wire protocol requests to wireprotoserver. We still had a little logic in hgweb. If feels like the right time to finish the job. This commit moves WSGI request servicing from hgweb to wireprotoserver. The ugly dict holding the parsed request is no more. I think the new code is cleaner. As part of this, we now process wire protocol requests before the block to obtain the "query" variable. This makes it clear that this wonky "query" variable is not used by the wire protocol. The wonkiest part about this code is the HTTP 404. I'm actually not sure what all is going on here. It looks like the code is trying to prevent URL with path components that specify a command from not working. That part I grok. What I don't grok is why we need to send a 404. I would think it would be OK to no-op and let another handler try to service the request. But if we do this, we get some subrepo test failures. So it looks like something is expecting the HTTP 404 and reacting to it in a specific way. It /might/ be possible to change the behavior here. But it isn't something I'm comfortable doing because I don't understand the problem space. Differential Revision: https://phab.mercurial-scm.org/D2740

hgweb: use parsed request to construct query parameters The way hgweb routes requests is kind of bonkers. If PATH_INFO is set, we take the URL path after the repository. Otherwise, we take the first part of the query string before "&" and the part before ";" in that. We then kinda/sorta treat this as a path and route based on that. This commit ports that code to use the parsed request object. This required a new attribute on the parsed request to indicate whether there is any PATH_INFO. The new code still feels a bit convoluted for my liking. But we'll need to rewrite more of the code before a better solution becomes apparant. This code feels strictly better since we're no longer doing low-level WSGI manipulation during routing. Differential Revision: https://phab.mercurial-scm.org/D2739

hgweb: only recognize wire protocol commands from query string (BC) Previously, we attempted to parse the wire protocol command from `req.form`. Data could have come from the query string or POST form data. The wire protocol states that the command must be declared in the query string. And AFAICT all Mercurial releases from at least 1.0 send the command in the query string. So let's actual require this behavior. This is technically BC. But I'm not sure how anyone in the wild would encounter this. POST has historically been used for sending bundle data. So there's no opportunity to encode arguments there. And the experimental HTTP POST args also takes over the body. So the only way someone would be impacted by this is if they wrote a custom client that both used POST for everything and sent arguments via the HTTP body. I don't believe such a client exists. .. bc:: The HTTP wire protocol server no longer accepts the ``cmd`` argument to control which command to run via HTTP POST bodies. The ``cmd`` argument must be specified on the URL query string. Differential Revision: https://phab.mercurial-scm.org/D2738

hgweb: teach WSGI parser about query strings Currently, req.form uses cgi.parse() to populate form data. Depending on the request, form data can come from POST multipart/form-data, application/x-www-form-urlencoded, or the URL query string. Putting all these things into one data structure makes it difficult to reason about how exactly parameters got to the request. It can lead to wonkiness such as pulling parameters from both the URL and POST data. This commit teaches our WSGI request parser about argument data in query strings. We populate fields containing the query string data and only the query string data so it can't be confused with POST data. Differential Revision: https://phab.mercurial-scm.org/D2737

hgweb: use the parsed application path directly Previously, we assigned a custom system string with a trailing slash to wsgirequest.url. The addition of the trailing slash felt arbitrary and seems to go against how things typically work in WSGI. We also want our URLs to be bytes, not system strings. And, assigning a custom attribute to wsgirequest felt wrong. This commit fixes all those things by removing the trailing slash from the app path, changing consumers to use that variable and to use it without a trailing slash, and removing the custom attribute from wsgirequest. We preserve the trailing slash on {url}. Also, makebreadcrumb strips the trailing slash. So no change to it was needed. Differential Revision: https://phab.mercurial-scm.org/D2736

hgweb: use computed base URL from parsed request Let's not reinvent URL construction in a function that runs the templater. Differential Revision: https://phab.mercurial-scm.org/D2735

hgweb: parse WSGI request into a data structure Currently, our WSGI applications (hgweb_mod and hgwebdir_mod) process the raw WSGI request instance themselves. This means they have to talk in terms of system strings. And they need to know details about what's in the WSGI request. And in the case of hgweb_mod, it is doing some very funky things with URL parsing to impact dispatching. The code is difficult to read and maintain. This commit introduces parsing of the WSGI request into a higher-level and easier-to-reason-about data structure. To prove it works, we hook it up to hgweb_mod and use it for populating the relative URL on the request instance. We hold off on using it in more places because the logic in hgweb_mod is crazy and I don't want to involve those changes with review of the parsing code. The URL construction code has variations that use the HTTP: Host header (the canonical WSGI way of reconstructing the URL) and with the use of SERVER_NAME. We need to differentiate because hgweb is currently using SERVER_NAME for URL construction. Differential Revision: https://phab.mercurial-scm.org/D2734

hgweb: always use "?" when writing session vars This code resolves a string to insert in URLs as part of a query string. Essentially, it resolves the {sessionvars} template keyword, which is used by hgweb templates to build a URL as a string. The whole approach here feels wrong because there's no way of knowing when this code runs how the final URL will look. There could be additional URL fragments added before this template keyword that add a query string component. Furthermore, I don't think there's *any* for req.url to have a query string. That's because the code that populates this variable only takes SCRIPT_NAME and REPO_NAME into account. The "?" character it is searching for would only be added if some code attempted to add QUERY_STRING to the URL. Hacking the code up to raise if "?" is present in the URL yields a clean test suite run. I'm not sure if we broke this code or if it has always been broken. Anyway, this commit removes support for emitting "&" as the first character in {sessionvars} and makes it always emit "?", which is what it was always doing before AFAICT. Differential Revision: https://phab.mercurial-scm.org/D2733