run-tests: make failure reporting in unittest mode equivalent to default Unlike unittest's defaults, our result formatter does not print stack traces. Here, we change TestResult.addFailure() to be compatible with the existing/default execution mode.

run-tests: ignore failures from rmtree rmtree() may fail under certain conditions. We ignore failures at the individual test level because they can interfere with test execution. Furthermore, we'll reattempt deletion in the high-level test runner after all tests have finished. Note that this patch is not a code refactor like most of the patches before it. This change logically makes sense given the execution behavior of the tests.

run-tests: abort tests after first failure in unittest mode There is an execution mode on run-tests.py that stops after the first failure. unittest mode was previously not obeying this option. This patch fixes that.

run-tests: print compatible output from TextTestRunner Our unittest TextTestRunner now prints output similar to the output from the default execution mode - the output people expect from run-tests.py.

run-tests: don't print results in unittest mode A subsequent patch will have unittest print tests for us. Don't perform old-style printing when in unittest mode.

run-tests: move errpath deletion to setUp()

run-tests: kill daemons during tearDown()

run-tests: move err file writing to tearDown()

run-tests: refactor testtmp testtmp is now a member variable of our test class. It's value is computed during instance creation and the directory is managed via the lifetime of the test object.

run-tests: store skipped state on Test As code is being moved between functions, we need a member variable to hold skipped state.

run-tests: move some functionality to Test.tearDown()

run-tests: store last result in Test._result Subsequent patches move post-test actions into tearDown(). This requires tearDown() to have access to the last result.

run-tests: report test duration in Test.tearDown()

run-tests: store test return code and output in Test instance A subsequent patch that will introduce tearDown() requires test execution state be stored in the instance.

run-tests: keep track of test start and stop in MercurialTest.run() This brings run() more compatible with unittest.TestCase.run()

run-tests: keep track of test execution state in Test This patch starts a mini series of moving functionality into the newly-established setUp() and tearDown() methods.

run-tests: support setUp() and tearDown() in TestCase wrapper unittest.TestCase.run() calls setUp() and tearDown() during run(). We emulate that implementation.

run-tests: fail tests by raising an exception When in unittest mode, Test.run() will now raise for all non-success cases. This makes it behave like TestCase.run().

run-tests: record warnings by raising WarnTest We continue the conversion of recording test results by raising exceptions.

run-tests: record ignored tests by raising IgnoreTest

run-tests: record skips by raising SkipTest The unittest way of recording a skipped test is to raise an exception (at least with modern unittest implementation). We change Test to raise a SkipTest when operating in unittest mode. This does prevent some "tear down" activities from running in unittest mode. This will be fixed in subsequent patches. Since unittest mode is experimental, this should be OK.

run-tests: implement TestCase.run() Simply wrapping TestCase.run() is not sufficient for robust results reporting because unittest in Python 2.4 does not know about things like skipped tests and reports them as success or failures instead of skips. We will reimplement TestCase.run() with knowledge and semantics present in modern Python releases.

run-tests: don't print progress from Test when in unittest mode unittest does its own printing of progress indicators as part of TestResult. So, there is no need to print them when running in unittest mode. This will fix the double output of progress indicators that had been occurring in unittest mode.

run-tests: define a custom TestSuite that uses _executetests() We now have a custom unittest.TestSuite implementation that uses _executetests() and thus knows how to execute tests concurrently. Running tests in --unittest mode will use this TestSuite. Since the TestSuite handles concurrency, the warnings around --jobs and --loop have been removed.

run-tests: pass an optional TestResult into _executetests() If the result is passed, we execute tests in the unittest way. A subsequent patch will actually do this.

run-tests: pass Test instances into TestRunner._executetests() Test instances (not paths) are passed into _executetests(). This means the logic for instantiating Test instances has been moved outside of _executetests(). This was done because an upcoming patch will reuse the logic in _executetests(). As part of this change, test counts are no longer managed by _executetests().

run-tests: define cleanup() on unittest class We need a cleanup() on our unittest TestCase class to conform with the execution API. This will eventually be replaced by tearDown().

run-tests: rename Test._test to Test.name A lot of the attributes in Test could probably be renamed. This one is needed for an upcoming patch.

run-tests: teach Test instances whether they are in unittest mode Tests executing in unittest mode behave a little differently. For example, they report their results to a TestResult rather than just printing. This patch paves the way for better integration of Test into the unittest framework.

run-tests: teach unittest about warned results

run-tests: document how success code is handled

run-tests: teach unittest about ignored tests

run-tests: teach unittest about skipped tests

run-tests: define custom result and runner classes for unittest We need to teach unittest about some custom result types. This will require some custom classes. This patch creates a skeleton for them.

run-tests: start to report test results against TestResult Previously, our unittest wrapper didn't report results properly. We now properly report failures. We had to rename the local variable to prevent "t" from being overwritten in the local scope.

run-tests: give unittest wrapper a short description This will make the output contain something useful rather than the default repr() for the class.

run-tests: initial support for running tests with unittest The unittest package in Python's standard library provides an almost universal mechanism for defining and running tests. This patch starts the process of making run-tests.py talk to it. The main benefit of speaking unittest is that this will enable Mercurial's tests to be more easily consumed by other testing tools, like nose. This is useful for 3rd party extensions having their own test infrastructure, for example. Running tests in unittest mode will not result in completely sane behavior until the unittest mode is made the default execution mode. Expect things like double printing of output until support stabilizes.

localrepo: reverse contexts in status This is a slight tweak to how localrepo.status calculates what files have changed. By forcing a changectx to be first operator and anything not a changectx to be the second operator, we can later exploit this to allow refactoring the status operation as a method of a context object. Furthermore, this change will speed up 'hg diff --reverse' when used with the working directory because the code will now hit a fast path without needing to calculate an unneeded second manifest.

test: split test-largefile.t in multiple file The `test-largefiles.t` unified test is significantly longer (about 30%) than any other tests in the mercurial test suite. As a result, its is alway the last test my test runner is waiting for at the end of a run. In practice, this means that `test-largefile.t` is wasting half a minute of my life every times I'm running the mercurial test suites. This probably mean more a few cumulated day by now. I've finally decided to split it up in multiple smaller tests to bring it back in reasonable length. This changeset extracts independent test cases in two files. One dedicated to wire protocole testing, and another one dedicated to all other tests that could be independently extracted. No test case were haltered in the making of this changeset. Various timing available below. All timing have been done on a with 90 jobs on a 64 cores machine. Similar result are shown on firefly (20 jobs on 12 core). General timing of the whole run -------------------------------- We see a 25% real time improvement for no significant cpu time impact. Before split: real 2m1.149s user 58m4.662s sys 11m28.563s After split: real 1m31.977s user 57m45.993s sys 11m33.634s Last test to finish (using run-test.py --time) ---------------------------------------------- test-largefile.t is now finishing at the same time than other slow tests. Before split: Time Test 119.280 test-largefiles.t 93.995 test-mq.t 89.897 test-subrepo.t 86.920 test-glog.t 85.508 test-rename-merge2.t 83.594 test-revset.t 79.824 test-keyword.t 78.077 test-mq-header-date.t After split: Time Test 90.414 test-mq.t 88.594 test-largefiles.t 85.363 test-subrepo.t 81.059 test-glog.t 78.927 test-rename-merge2.t 78.021 test-revset.t 77.777 test-command-template.t Timing of largefile test themself ----------------------------------- Running only tests prefixed with "test-largefiles". No significant change in cumulated time. Before: Time Test 58.673 test-largefiles.t 2.931 test-largefiles-cache.t 0.583 test-largefiles-small-disk.t After: Time Test 31.754 test-largefiles.t 17.460 test-largefiles-misc.t 8.888 test-largefiles-wireproto.t 2.864 test-largefiles-cache.t 0.580 test-largefiles-small-disk.t

mq: use the editor gotten by "getcommiteditor()" instead of "ui.edit()" (qrefresh/qfold) This patch also replaces "editor = False" by "editor = cmdutil.getcommiteditor()", because: - it allows to hook commit message determination easily, even in the case without "--edit" - it avoids regression (or additional care) around saving "last-message.txt", even if MQ's "newcommit()" changes its implementation logic from "localrepository.commit" to "localrepository.commitctx" with "memctx" in the future to save commit message into "last-messge.txt" with "memctx", "editor" should be valid function.

mq: fold the code paths to invoke editor into specific logic (qrefresh/qfold) This factoring simplifies the succeeding patch to switch from "ui.edit()" to "getcommiteditor()" for qrefresh/qfold.

mq: use the editor gotten by "getcommiteditor()" instead of "ui.edit()" (qnew) This patch also replaces "editor = False" by "editor = cmdutil.getcommiteditor()", because: - the latter allows to hook commit message determination easily, even in the case without "--edit" - the latter can avoid regression (or additional care) around saving "last-message.txt", even if MQ's "newcommit()" changes its implementation logic from "localrepository.commit" to "localrepository.commitctx" with "memctx" in the future to save commit message into "last-messge.txt" with "memctx", "editor" should be valid function.

mq: fold the code path to invoke editor into specific logic (qnew) This factoring simplifies the succeeding patch to switch from "ui.edit()" to "getcommiteditor()" for qnew.

cmdutil: enhance "getcommiteditor()" for specific usages in MQ This patch introduces "finishdesc" and "extramsg" arguments into "getcommiteditor()" for specific usages in MQ. "finishdesc" will be used to treat the commit message as "[mq]; patch-file-name" (default MQ commit message), if it is left as empty, instead of aborting commit process. "extramsg" will be used to show the line below: HG: Leave message empty to use default message instead of: HG: Leave message empty to abort commit

tag: use the editor gotten by "getcommiteditor()" instead of "ui.edit()" This patch also enhances "test-tag.t", because "hg tag" hasn't been explicitly tested around editor invocation and "--edit" option.

import: use "getcommiteditor()" instead of explicit editor choice This patch also enhances "test-import-bypass.t" and "test-import.t", because "hg import" hasn't been explicitly tested around editor invocation and "--edit" option. This patch explicitly tests below: - with "--bypass" (regardless of "--edit"): - not invoked, if the patch contains the commit message - not invoked, if the commit message is explicitly specified - invoked, otherwise (just adding comment) - without "--bypass": - with "--edit": - not invoked, if "--no-commit" is not specified - invoked, otherwise - without "--edit": - not invoked, if the patch contains the commit message - not invoked, if "--message" or "--logfile" is specified (just adding comment) - invoked, otherwise

graft: use "getcommiteditor()" instead of explicit editor choice This patch also enhances "test-graft.t", because "hg graft" hasn't been explicitly tested around editor invocation and "--edit" option.

amend: use "getcommiteditor()" instead of explicit editor choice This patch doesn't change any tests like as preceding patches, because editor invocation is already tested in "test-commit-amend.t".

commit: use "getcommiteditor()" instead of explicit editor choice This patch also eliminates "forceeditor" no more referred. This patch doesn't change any tests like as preceding patches, because editor invocation is already tested well.

backout: use "getcommiteditor()" instead of explicit editor choice This patch also enhances "test-backout.t", because "hg backout" hasn't been explicitly tested around editor invocation and '--edit' option.

backout: avoid redundant message examination Before this patch, "hg backout" examines "--message" and "--logfile" options explicitly. But this examination is redundant, because "commitfunc()" can receive the result of same examination by "cmdutil.logmessage()" in "cmdutil.commit()" through "message" argument. This patch avoids redundant message examination by "message" examination in "commitfunc()".

transplant: use "getcommiteditor()" instead of explicit editor choice This patch also enhances "test-transplant.t", because "hg transplant" hasn't been explicitly tested around editor invocation and "--edit" option.

rebase: use "getcommiteditor()" instead of explicit editor choice This patch also enhances "test-rebase-scenario-global.t", because "hg rebase" hasn't been explicitly tested around editor invocation and "--edit" option. In the other hand, this patch doesn't enhance tests in "hg rebase --collapse" case, because it is already tested in "test-rebase-collapse.t".

histedit: use "getcommiteditor()" instead of explicit editor choice for "--continue" This omits (redundant) adding "\n' to "message", because: - empty line is inserted by "commitforceeditor", if editor is invoked - tail white-spaces are stripped at storing into chaneglog, otherwise This patch also enhances "test-histedit-edit.t", because "hg histedit" hasn't been explicitly tested around editor invocation and "--continue" option.

histedit: use "getcommiteditor()" instead of explicit editor choice for "fold" This patch doesn't change any tests like as preceding patches, because editor invocation is already tested in "test-histedit-fold.t".

histedit: use the editor gotten by "getcommiteditor()" for "message" Before this patch, "hg histedit" for "message" uses "ui.edit()" for commit message editing. It shows original commit message, but not detail about the target revision: status of each modified/added/removed files, for example. This patch uses the editor gotten by "getcommiteditor()" instead of "ui.edit()" for "message" In "test-histedit-edit.t", this patch omits "fixbundle" invocation, because it prevents from confirming the "HG: added f" line in commit message by filtering " added " lines. Omiting "fixbundle" invocation causes that the exit code of "hg histedit" appears as one of command line: in this case, "hg histedit" is aborted by (expected) exception raising.