exchange: use command executor for getbundle The code consuming the bundle has been moved to inside the context manager, as that is supposed to be part of the API. (Although it doesn't matter for version 1 peers.) Differential Revision: https://phab.mercurial-scm.org/D3316

exchange: use command executor for pushkey Differential Revision: https://phab.mercurial-scm.org/D3315

wireproto: use command executor for unbundle This also required unifying the name of the argument because the new API always passes arguments by keyword. I decided to change implementations to "bundle" instead of the interface to "cg" because "bundle" is more appropriate in a modern world. Differential Revision: https://phab.mercurial-scm.org/D3314

debugcommands: perform handshake when obtaining httpv2 peer If we obtain an httpv2peer directly, the instance doesn't have an API descriptor and therefore doesn't know about the remote's commands, feature support, etc. This doesn't matter now. But when we implement the peer so it consults the API descriptor as part of sending commands, it will. So we change the logic for obtaining an http version 2 peer to go through makepeer() so the peer will perform the handshake and pass the API descriptor to the httpv2peer instance. Tests changed because we now perform a ?cmd=capabilities when obtaining version 2 peers. The Content-Length header is globbed because compression info will lack zstandard for pure builds. Differential Revision: https://phab.mercurial-scm.org/D3296

wireproto: rename HTTPV2 so it less like HTTP/2 Per review suggestion on D3230 from Augie. Differential Revision: https://phab.mercurial-scm.org/D3295

bundlerepo: use command executor for wire protocol commands Differential Revision: https://phab.mercurial-scm.org/D3294

bundlerepo: rename "other" to "peer" Differential Revision: https://phab.mercurial-scm.org/D3293

bookmarks: use command executor for wire protocol commands And change the name of a variable to reflect that is is a peer. Differential Revision: https://phab.mercurial-scm.org/D3292

hg: use command executor for wire protocol commands As part of this, I realized that some uses of lookup in a loop could be converted to use a batch request. But I didn't change behavior and left in a todo to track potentially changing this. Differential Revision: https://phab.mercurial-scm.org/D3291

logexchange: use command executor for wire protocol commands Differential Revision: https://phab.mercurial-scm.org/D3290

streamclone: use command executor for wire protocol commands Differential Revision: https://phab.mercurial-scm.org/D3289

discovery: use command executor interface We're trying to port all wire protocol code to use the new interface so we can implement wire protocol version 2 clients. Differential Revision: https://phab.mercurial-scm.org/D3288

discovery: don't redundantly call branchmap We were calling the remote command twice without mutation the remote in between. Derp. Differential Revision: https://phab.mercurial-scm.org/D3287

wireproto: convert legacy commands to command executor Calls to the legacy commands "changegroup" and "changegroupsubset" have been ported to the new command executor interface. Because we always pass arguments by name and not position, some inconsistent names throughout the code base have been unified. As part of this change, we no longer had any remaining callers of the legacy command methods {between, branches, changegroup, changegroupsubset}. So, these interfaces/methods have been dropped from peer interfaces. We still have an interface declaring these methods. But that interface is implemented on the concrete peer types and isn't part of the generic peer interface. (The implementations of the command executor continue to call these methods.) The ultimate goal is to remove the per-command methods from the generic peer interface: the only interface-conforming way to call a command will be with the new executor API. At some point, we may want to move the methods outside of the peer classes and change the executor implementations to not call methods directly on a peer instance. Differential Revision: https://phab.mercurial-scm.org/D3273

treediscovery: switch to command executor interface We now have a new interface for requesting that commands run. Switch to it. Differential Revision: https://phab.mercurial-scm.org/D3272

wireproto: remove iterbatch() from peer interface (API) Good riddance. Some tests have been ported to the new API. This probably should have been done in earlier commits. But duplicating the test coverage would have been difficult. It was easier this way. .. api:: The wire protocol peer's ``iterbatch()`` for bulk executing commands has been remove.d Use ``peer.commandexecutor()`` instead. Differential Revision: https://phab.mercurial-scm.org/D3271

largefiles: use command executor for batch operation This is the only other user of iterbatch() in core. Tests changed because the new command executor is smart enough to not send a "batch" command over the wire if only 1 command was requested. There is still coverage for the "batch" command in this test though. Differential Revision: https://phab.mercurial-scm.org/D3270

wireproto: implement batching on peer executor interface This is a bit more complicated than non-batch requests because we need to buffer sends until the last request arrives *and* we need to support resolving futures as data arrives from the remote. In a classical concurrent.futures executor model, the future "starts" as soon as it is submitted. However, we have nothing to start until the last command is submitted. If we did nothing, calling result() would deadlock, since the future hasn't "started." So in the case where we queue the command, we return a special future type whose result() will trigger sendcommands(). This eliminates the deadlock potential. It also serves as a check against callers who may be calling result() prematurely, as it will prevent any subsequent callcommands() from working. This behavior is slightly annoying and a bit restrictive. But it's the world that half duplex connections forces on us. In order to support streaming responses, we were previously using a generator. But with a futures-based API, we're using futures and not generators. So in order to get streaming, we need a background thread to read data from the server. The approach taken in this patch is to leverage the ThreadPoolExecutor from concurrent.futures for managing a background thread. We create an executor and future that resolves when all response data is processed (or an error occurs). When exiting the context manager, we wait on that background reading before returning. I was hoping we could manually spin up a threading.Thread and this would be simple. But I ran into a few deadlocks when implementing. After looking at the source code to concurrent.futures, I figured it would just be easier to use a ThreadPoolExecutor than implement all the code needed to manually manage a thread. To prove this works, a use of the batch API in discovery has been updated. Differential Revision: https://phab.mercurial-scm.org/D3269

wireproto: implement command executor interface for version 1 peers Now that we've defined our new interface for issuing commands, let's implement it. We add the interface to the base peer interface. This means all peer types must implement it. The only peer types that we have are the local peer in localrepo and a shared wire peer for version 1 of the wire protocol. The local peer implementation is pretty straightforward. We don't do anything fancy and just return a resolved future with the result of a method call. This is similar to what localiterbatcher does. The wire protocol version 1 implementation is a bit more complicated and is a more robust implementation. The wire executor queues commands by default. And because the new executor interface always allows multiple commands but not all version 1 commands are @batchable, it has to check that the requested commands are batchable if multiple commands are being requested. The wire executor currently only supports executing a single command. This is for simplicity reasons. Support for multiple commands will be added in a separate commit. To prove the new interface works, a call to the "known" command during discovery has been updated to use the new API. It's worth noting that both implementations require a method having the command name to exist on the peer. There is at least one caller in core that don't have a method calls peer._call() directly. We may need to shore up the requirements later... Differential Revision: https://phab.mercurial-scm.org/D3268

repository: define new interface for running commands Today, the peer interface exposes methods for each command that can be executed. In addition, there is an iterbatch() API that allows commands to be issued in batches and provides an iterator over the results. This is a glorified wrapper around the "batch" wire command. Wire protocol version 2 supports nicer things (such as batching any command and out-of-order replies). It will require a more flexible API for executing commands. This commit introduces a new peer interface for making command requests. In the new world, you can't simply call a method on the peer to execute a command: you need to obtain an object to be used for executing commands. That object can be used to issue a single command or it can batch multiple requests. In the case of full duplex peers, the command may even be sent out over the wire immediately. There are no per-command methods. Instead, there is a generic method to call a command. The implementation can then perform domain specific processing for specific commands. This includes passing data via a specially named argument. Arguments are also passed as a dictionary instead of using **kwargs. While **kwargs is nicer to use, we've historically gotten into trouble using it because there will inevitably be a conflict between the name of an argument to a wire protocol command and an argument we want to pass into a function. Instead of a command returning a value, it returns a future which will resolve to a value. This opens the door for out-of-order response handling and concurrent response handling in the version 2 protocol. Differential Revision: https://phab.mercurial-scm.org/D3267

pycompat: export a handle on concurrent.futures On Python 3, we use the built-in version in the standard library. Else we use our vendored backport. Differential Revision: https://phab.mercurial-scm.org/D3266

setup: add packages for concurrent.futures We conceivably don't need to distribute this package on Python 3 since we will use the version in the standard library. However, we want installs to be usable of multiple versions of Python. So it is best to always have it. Differential Revision: https://phab.mercurial-scm.org/D3265

futures: switch to absolute and relative imports This makes the package conform with our importing policy, silencing a number of warnings. It also makes the package usable when it isn't named "concurrent.futures." Differential Revision: https://phab.mercurial-scm.org/D3264

tests: silence pyflakes for thirdparty/concurrent It is complaining about unused imports. Differential Revision: https://phab.mercurial-scm.org/D3263