util: check for compression engine availability before returning If a requested compression engine is registered but not available, requesting it will now abort. To be honest, I'm not sure if this is the appropriate mechanism for handling optional compression engines. I won't know until all uses of compression (bundles, wire protocol, revlogs, etc) are using the new API and zstd (our planned optional engine) is implemented. So this API could change.

util: expose an "available" API on compression engines When the zstd compression engine is introduced, it won't work in all installations, namely pure Python installs. So, we need a mechanism to declare whether a compression engine is available. We don't want to conditionally register the compression engine because it is sometimes useful to know when a compression engine name or encountered data is valid but just not available versus unknown.

setup: compile zstd C extension Now that zstd and python-zstandard are vendored, we can start compiling them as part of the install. python-zstandard provides a self-contained Python function that returns a distutils.extension.Extension, so it is really easy to add zstd to our setup.py without having to worry about defining source files, include paths, etc. The function even allows specifying the module name the extension should be compiled as. This conveniently allows us to compile the module into the "mercurial" package so "our" version won't collide with a version installed under the canonical "zstd" module name.

zstd: vendor python-zstandard 0.5.0 As the commit message for the previous changeset says, we wish for zstd to be a 1st class citizen in Mercurial. To make that happen, we need to enable Python to talk to the zstd C API. And that requires bindings. This commit vendors a copy of existing Python bindings. Why do we need to vendor? As the commit message of the previous commit says, relying on systems in the wild to have the bindings or zstd present is a losing proposition. By distributing the zstd and bindings with Mercurial, we significantly increase our chances that zstd will work. Since zstd will deliver a better end-user experience by achieving better performance, this benefits our users. Another reason is that the Python bindings still aren't stable and the API is somewhat fluid. While Mercurial could be coded to target multiple versions of the Python bindings, it is safer to bundle an explicit, known working version. The added Python bindings are mostly a fully-featured interface to the zstd C API. They allow one-shot operations, streaming, reading and writing from objects implements the file object protocol, dictionary compression, control over low-level compression parameters, and more. The Python bindings work on Python 2.6, 2.7, and 3.3+ and have been tested on Linux and Windows. There are CFFI bindings, but they are lacking compared to the C extension. Upstream work will be needed before we can support zstd with PyPy. But it will be possible. The files added in this commit come from Git commit e637c1b214d5f869cf8116c550dcae23ec13b677 from https://github.com/indygreg/python-zstandard and are added without modifications. Some files from the upstream repository have been omitted, namely files related to continuous integration. In the spirit of full disclosure, I'm the maintainer of the "python-zstandard" project and have authored 100% of the code added in this commit. Unfortunately, the Python bindings have not been formally code reviewed by anyone. While I've tested much of the code thoroughly (I even have tests that fuzz APIs), there's a good chance there are bugs, memory leaks, not well thought out APIs, etc. If someone wants to review the code and send feedback to the GitHub project, it would be greatly appreciated. Despite my involvement with both projects, my opinions of code style differ from Mercurial's. The code in this commit introduces numerous code style violations in Mercurial's linters. So, the code is excluded from most lints. However, some violations I agree with. These have been added to the known violations ignore list for now.

zstd: vendor zstd 1.1.1 zstd is a new compression format and it is awesome, yielding higher compression ratios and significantly faster compression and decompression operations compared to zlib (our current compression engine of choice) across the board. We want zstd to be a 1st class citizen in Mercurial and to eventually be the preferred compression format for various operations. This patch starts the formal process of supporting zstd by vendoring a copy of zstd. Why do we need to vendor zstd? Good question. First, zstd is relatively new and not widely available yet. If we didn't vendor zstd or distribute it with Mercurial, most users likely wouldn't have zstd installed or even available to install. What good is a feature if you can't use it? Vendoring and distributing the zstd sources gives us the highest liklihood that zstd will be available to Mercurial installs. Second, the Python bindings to zstd (which will be vendored in a separate changeset) make use of zstd APIs that are only available via static linking. One reason they are only available via static linking is that they are unstable and could change at any time. While it might be possible for the Python bindings to attempt to talk to different versions of the zstd C library, the safest thing to do is link against a specific, known-working version of zstd. This is why the Python zstd bindings themselves vendor zstd and why we must as well. This also explains why the added files are in a "python-zstandard" directory. The added files are from the 1.1.1 release of zstd (Git commit 4c0b44f8ced84c4c8edfa07b564d31e4fa3e8885 from https://github.com/facebook/zstd) and are added without modifications. Not all files from the zstd "distribution" have been added. Notably missing are files to support interacting with "legacy," pre-1.0 versions of zstd. The decision of which files to include is made by the upstream python-zstandard project (which I'm the author of). The files in this commit are a snapshot of the files from the 0.5.0 release of that project, Git commit e637c1b214d5f869cf8116c550dcae23ec13b677 from https://github.com/indygreg/python-zstandard.

bdiff: give slight preference to removing trailing lines [This change could be folded into the previous changeset to minimize the repo churn ...] Similar to the previous change, introduce an exception to the general preference for matches in the middle of bdiff ranges: If the best match on the B side starts at the beginning of the bdiff range, don't aim for the middle-most A side match but for the earliest. New (later) matches on the A side will only be considered better if the corresponding match on the B side *not* is at the beginning of the range. Thus, if the best (middle-most) match on the B side turns out to be at the beginning of the range, the earliest match on the A side will be used. The bundle size for 4.0 (hg bundle --base null -r 4.0 x.hg) happens to go from 22807275 to 22808120 bytes - a 0.004% increase.

bdiff: give slight preference to appending lines [This change could be folded into the previous changeset to minimize the repo churn ...] The general preference to matches in the middle of bdiff ranges helps getting balanced recursion and efficient computation. But, as previous changes have shown, it might also give diffs that seems "obviously wrong". To mitigate that: If the best match on the A side starts at the beginning of the bdiff range, don't aim for the middle-most B side match but for the earliest. This will make the matches balanced (by both sides being "early") even though the bisection will be less balanced. Still, this case only apply if the *best* and middle-most match was fully unbalanced on the A side. Each recursion will thus even in this worst case reduce the problem significantly and we are not re-introducing the problem that was fixed in f1ca249696ed. The bundle size for 4.0 (hg bundle --base null -r 4.0 x.hg) happens to go from 22806817 to 22807275 bytes - a 0.002% increase. This make the recent test-bdiff.py changes give a more pretty output ... but they no longer show that the recursion is around middle matches (because it in these cases isn't).

bdiff: give slight preference to longest matches in the middle of the B side We already have a slight preference for matches close to the middle on the A side. Now, do the same on the B side. j is iterating the b range backwards and we thus accept a new j if the previous match was in the upper half. This makes the test-bhalf diff "correct". It obviously also gives more preference to balanced recursion than to appending to sequences. That is kind of correct, but will also unfortunately make some bundles bigger. No doubt, we can also create examples where it will make them smaller ... The bundle size for 4.0 (hg bundle --base null -r 4.0 x.hg) happens to go from 22803824 to 22806817 bytes - an 0.01% increase.

bdiff: rearrange the "better longest match" code This is primarily to make the code more managable and prepare for later changes. More specific assignments might also be slightly faster, even thought it also might generate a bit more code.

bdiff: adjust criteria for getting optimal longest match in the A side middle We prefer matches closer to the middle to balance recursion, as introduced in f1ca249696ed. For ranges with uneven length, matches starting exactly in the middle should have preference. That will be optimal for matches of length 1. We will thus accept equality in the half check. For ranges with even length, half was ceil'ed when calculated but we got the preference for low matches from the 'less than half' check. To get the same result as before when we also accept equality, floor it. Without that, test-annotate.t would show some different (still correct but less optimal) results. This will change the heuristics. Tests shows a slightly different output - and sometimes slightly smaller bundles. The bundle size for 4.0 (hg bundle --base null -r 4.0 x.hg) happens to go from 22804885 to 22803824 bytes - an 0.005% reduction.

tests: explore some bdiff cases

tests: make test-bdiff.py easier to maintain Add more stdout logging to help navigate the .out file.

perf: unbust perfbdiff --alldata This broke in f84fc6a92817 due to a refactored manifest API. The fix is a bit hacky - perfbdiff doesn't yet support tree manifests for example. But it gets the job done. A test has been added for --alldata so this doesn't happen again.

worker: discard waited pid by anyone who noticed it first This makes sure all waited pids are removed before calling killworkers() even if waitpid()-pids.discard() sequence is interrupted by another SIGCHLD.

worker: kill workers after all zombie processes are reaped Since we now wait child processes in non-blocking way (changed by 7bc25549e084 and e8fb03cfbbde), we don't have to kill them in the middle of the waitpid() loop. This change will help solving a possible race of waitpid()-pids.discard() sequence and another SIGCHLD. waitforworkers() is called by cleanup(), in which case we do killworkers() beforehand so we can remove killworkers() from waitforworkers().

worker: make sure killworkers() never be interrupted by another SIGCHLD killworkers() iterates over pids, which can be updated by SIGCHLD handler. So we should either copy pids or prevent killworkers() from being interrupted by SIGCHLD. I chose the latter as it is simpler and can make pids handling more consistent. This fixes a possible "set changed size during iteration" error at killworkers() before cleanup().

worker: fix missed break on successful waitpid() Follow-up for 5069a8a40b1b.

filterpyflakes: dramatically simplify the entire thing by blacklisting We've only got one kind of pyflakes failure left in our codebase, so it's time to switch over to a blacklist-based checking scheme. I've left in the filtering of two undefined names for now out of paranoia, but those can probably go too.

run-tests: forward Python USER_BASE from site (issue5425) We do this so that any linters installed via pip install --user don't break. See https://docs.python.org/2/library/site.html#site.USER_BASE for a description of what this nonsense is all about. An alternative would be to not set HOME, but that'll cause other problems (see issue2707), or to forward every single path entry from sys.path in PYTHONPATH (which seems sketchy in its own way).

shelve: add missing space in help text The change is trivial and unlikely to have been translated so we update translation files too.

util: improve iterfile so it chooses code path wisely We have performance concerns on "iterfile" as it is 4X slower on normal files. While modern systems have the nice property that reading a "fast" (on-disk) file cannot be interrupted and should be made use of. This patch dumps the related knowledge in comments. And "iterfile" chooses code paths wisely: 1. If it's CPython 3, or PyPY, use the fast path. 2. If fp is a normal file, use the fast path. 3. If fp is not a normal file and CPython version >= 2.7.4, use the same workaround (4x slower) as before. 4. If fp is not a normal file and CPython version < 2.7.4, use another workaround (2x slower but may block longer then necessary) which basically re-invents the buffer + readline logic in Python. This will give us good confidence on both correctness and performance dealing with EINTR in iterfile(fp) for all known supported Python versions.

merge with stable

worker: stop using a separate thread waiting for children Now that we have a SIGCHLD hander, and it could get executed when waiting for I/O. It's no longer necessary to have a separated waitpid thread. So just remove it.

worker: add a SIGCHLD handler to collect worker immediately As planned by previous patches, add a SIGCHLD handler to get notifications about worker exits, and deals with worker failure immediately. Note that the SIGCHLD handler gets unregistered before killworkers(), so SIGCHLD won't interrupt "killworkers" - making it harder to send kill signals to waited processes.