Wed, 22 Jan 2014 15:40:17 -0600 convert: add tagmap logic
Sean Farley <sean.michael.farley@gmail.com> [Wed, 22 Jan 2014 15:40:17 -0600] rev 20378
convert: add tagmap logic Previously, there was no way to rewrite tags on the fly while converting. Now, we add similar logic to branchmap to provide a way to map old tags to new tags. Currently, this is not enabled since there is not yet a command-line option.
Wed, 22 Jan 2014 15:31:24 -0600 convert: avoid updating tags when there is nothing new
Sean Farley <sean.michael.farley@gmail.com> [Wed, 22 Jan 2014 15:31:24 -0600] rev 20377
convert: avoid updating tags when there is nothing new Previously, when converting from a mercurial repo there would be an extraneous commit at the end of the convert process that would rewrite tags. Now, we check if there are any new tags before doing this rewriting.
Wed, 22 Jan 2014 17:38:05 -0600 convert: compare tags from all heads instead of just one
Sean Farley <sean.michael.farley@gmail.com> [Wed, 22 Jan 2014 17:38:05 -0600] rev 20376
convert: compare tags from all heads instead of just one Previously, the hg sink for puttags would just use one head for getting the old tags which would sometimes lead to tags disappearing. Now, we iterate over all heads and merge the results.
Tue, 21 Jan 2014 11:35:17 -0600 convert: add closemap option
Sean Farley <sean.michael.farley@gmail.com> [Tue, 21 Jan 2014 11:35:17 -0600] rev 20375
convert: add closemap option Tests have been updated.
Tue, 21 Jan 2014 11:20:14 -0600 convert: add parseclosemap method
Sean Farley <sean.michael.farley@gmail.com> [Tue, 21 Jan 2014 11:20:14 -0600] rev 20374
convert: add parseclosemap method This is a copy of the parsesplicemap method and will serve as a way to specify which changesets to close while converting.
Tue, 21 Jan 2014 11:34:55 -0600 convert: add mapname parameter to checkrevformat
Sean Farley <sean.michael.farley@gmail.com> [Tue, 21 Jan 2014 11:34:55 -0600] rev 20373
convert: add mapname parameter to checkrevformat Upcoming patches will add new map files so we change the calling sequence of checkrevformat so that error messages will let the user know which file has the wrong rev format.
Thu, 18 Apr 2013 10:05:50 -0500 convert: replace old sha1s in the description
Sean Farley <sean.michael.farley@gmail.com> [Thu, 18 Apr 2013 10:05:50 -0500] rev 20372
convert: replace old sha1s in the description This is a simple find-and-replace strategy for matching anything in the old description of a converted commit and, if that matched sha1 exists in the mapping, replacing it with the new sha1. In particular, this is helpful for descriptions that contain tags with messages such as, "Added tag 1.0 for commit abcde1234567" which will now be automatically converted. Tests have been updated accordingly.
Wed, 05 Feb 2014 20:22:28 -0800 template: fix shortest(node) function in pure mercurial
Durham Goode <durham@fb.com> [Wed, 05 Feb 2014 20:22:28 -0800] rev 20371
template: fix shortest(node) function in pure mercurial Pure mercurial (i.e. without c extensions) does not support partialmatch() on the revlog index, so we must fall back to use revlog._partialmatch() to handle that case for us. The tests caught this. We don't use revlog._partialmatch() for the normal case because it performs a very expensive index iteration when the string being tested fails to find a unique result via index.partialmatch(). It does this in order to filter out hidden revs in hopes of the string being unique amongst non-hidden revs. For the shortest(node) case, we'd prefer performance over worrying about hidden revs.
Fri, 17 Jan 2014 00:16:48 -0800 template: add pad function for padding output
Durham Goode <durham@fb.com> [Fri, 17 Jan 2014 00:16:48 -0800] rev 20370
template: add pad function for padding output Adds a pad template function with the following signature: pad(text, width, fillchar=' ', right=False) This uses the standard python ljust and rjust functions to produce a string that is at least a certain width. This is useful for aligning variable length strings in log output (like user names or shortest(node) output).
Fri, 17 Jan 2014 00:10:37 -0800 template: add shortest(node) template function
Durham Goode <durham@fb.com> [Fri, 17 Jan 2014 00:10:37 -0800] rev 20369
template: add shortest(node) template function Adds a '{shortest(node)}' template function that results in the shortest hex node that uniquely identifies the changeset at that time. The minimum length can be specified as an optional second argument and defaults to 4. This is useful for producing prettier log output, like so: @ durham shortestnode | 77cf template: add pad function for padding output | o durham | b183 template: add shortestnode keyword | o pierre-yves @ | 6545 backout: add a message after backout that need manual commit | | o durham manifestcache |/ 93f0 manifest cache | | o durham catperf | | c765 cat: increase perf when catting single files | | | o durham |/ 9c53 changectx: increase perf of walk function |
Wed, 05 Feb 2014 18:09:07 -0600 merge with stable
Matt Mackall <mpm@selenic.com> [Wed, 05 Feb 2014 18:09:07 -0600] rev 20368
merge with stable
Fri, 24 Jan 2014 16:57:44 -0800 revset: added intersection to baseset class
Lucas Moscovicz <lmoscovicz@fb.com> [Fri, 24 Jan 2014 16:57:44 -0800] rev 20367
revset: added intersection to baseset class Added the method __and__ to the baseset class to be able to intersect with other objects in a more efficient way.
Thu, 23 Jan 2014 14:20:58 -0800 revset: added substraction to baseset class
Lucas Moscovicz <lmoscovicz@fb.com> [Thu, 23 Jan 2014 14:20:58 -0800] rev 20366
revset: added substraction to baseset class Added __sub__ method to the baseset class to be able to compare it with other subsets more efficiently.
Wed, 22 Jan 2014 10:46:02 -0800 revset: implemented set caching for revset evaluation
Lucas Moscovicz <lmoscovicz@fb.com> [Wed, 22 Jan 2014 10:46:02 -0800] rev 20365
revset: implemented set caching for revset evaluation Added set caching to the baseset class. It lazily builds the set whenever it's needed and keeps a reference which is returned when the set is requested instead of being built again.
Tue, 21 Jan 2014 11:39:26 -0800 revset: added baseset class (still empty) to improve revset performance
Lucas Moscovicz <lmoscovicz@fb.com> [Tue, 21 Jan 2014 11:39:26 -0800] rev 20364
revset: added baseset class (still empty) to improve revset performance This class is going to be used to cache the set that is created from this list in many cases while evaluating a revset.
Mon, 03 Feb 2014 21:34:13 +0100 i18n: leave out entries which contain only rst syntax
Simon Heimberg <simohe@besonet.ch> [Mon, 03 Feb 2014 21:34:13 +0100] rev 20363
i18n: leave out entries which contain only rst syntax This prevents the danger of translating entries like the following ones: .. container:: verbose .. input:: filename1.txt
Mon, 03 Feb 2014 21:33:48 +0100 i18n: leave out entries which contain only a rst directive
Simon Heimberg <simohe@besonet.ch> [Mon, 03 Feb 2014 21:33:48 +0100] rev 20362
i18n: leave out entries which contain only a rst directive This prevents the danger of translating entries like ".. note::"
Sun, 17 Nov 2013 20:24:33 +0100 i18n: posplit removes the entry "::" from the pot file
Simon Heimberg <simohe@besonet.ch> [Sun, 17 Nov 2013 20:24:33 +0100] rev 20361
i18n: posplit removes the entry "::" from the pot file We do not gain anything by allowing to translate it.
Wed, 29 Jan 2014 16:47:00 +0100 i18n-de: update po file for showing the effect of changed posplit
Simon Heimberg <simohe@besonet.ch> [Wed, 29 Jan 2014 16:47:00 +0100] rev 20360
i18n-de: update po file for showing the effect of changed posplit
Mon, 03 Feb 2014 21:31:35 +0100 i18n: posplit writes a warning for translators before rst directives
Simon Heimberg <simohe@besonet.ch> [Mon, 03 Feb 2014 21:31:35 +0100] rev 20359
i18n: posplit writes a warning for translators before rst directives rst directives like this one have been translated: .. note:: To help the translator include a comment before such messages. An entry containing a rst directive now looks like this: #. do not translate: .. note:: #: path/to/file:75 msgid = ".. note:: to think about" msgstr = ...
Sun, 17 Nov 2013 20:16:14 +0100 Makefile: hg.pot depends on the scripts generating it
Simon Heimberg <simohe@besonet.ch> [Sun, 17 Nov 2013 20:16:14 +0100] rev 20358
Makefile: hg.pot depends on the scripts generating it This is convenient when editing this scripts. And translators will get updated translation files even if nothing else has changed.
Wed, 05 Feb 2014 17:23:35 -0600 hgweb: hack around mimetypes encoding thinko (issue4160) stable
Matt Mackall <mpm@selenic.com> [Wed, 05 Feb 2014 17:23:35 -0600] rev 20357
hgweb: hack around mimetypes encoding thinko (issue4160) A correct patch for this has existed in Python's BTS for 3 years (http://bugs.python.org/issue9291), so waiting for it to be fixed upstream is probably not a viable strategy. Instead, we add this horrible hack to workaround the issue in existing copies of Python 2.4-2.7.
Mon, 03 Feb 2014 18:09:08 -0600 merge with stable
Matt Mackall <mpm@selenic.com> [Mon, 03 Feb 2014 18:09:08 -0600] rev 20356
merge with stable
Mon, 03 Feb 2014 14:36:20 -0800 hg: note that islocal only accepts paths pointing to repos stable
Siddharth Agarwal <sid0@fb.com> [Mon, 03 Feb 2014 14:36:20 -0800] rev 20355
hg: note that islocal only accepts paths pointing to repos hg.islocal doesn't work for paths pointing to non-repos, such as patch files.
Mon, 03 Feb 2014 14:53:44 -0800 hg.openpath: use url.islocal to tell if the path is local (issue3624) stable
Siddharth Agarwal <sid0@fb.com> [Mon, 03 Feb 2014 14:53:44 -0800] rev 20354
hg.openpath: use url.islocal to tell if the path is local (issue3624) Previously we used hg.islocal, which doesn't work for paths pointing to non-repos, such as patch files.
Mon, 03 Feb 2014 14:47:41 -0800 util.url: add an 'islocal' method stable
Siddharth Agarwal <sid0@fb.com> [Mon, 03 Feb 2014 14:47:41 -0800] rev 20353
util.url: add an 'islocal' method This returns True if the URL represents a path that can be opened locally, without needing to go through the entire URL open mechanism.
Thu, 30 Jan 2014 17:46:51 -0800 push: move bookmarks exchange in the exchange module
Pierre-Yves David <pierre-yves.david@logilab.fr> [Thu, 30 Jan 2014 17:46:51 -0800] rev 20352
push: move bookmarks exchange in the exchange module The bookmark exchange code was already extracted during a previous cycle. This changesets moves the extracted function in this module. This function will read and write data in the `pushoperation` object and It is preferable to have all core function collaborating through this object in the same place. This changeset is pure code movement only. Code change for direct consumption of the `pushoperation` object will come later.
Thu, 30 Jan 2014 17:08:29 -0800 push: move `newbranch` argument into the push object
Pierre-Yves David <pierre-yves.david@logilab.fr> [Thu, 30 Jan 2014 17:08:29 -0800] rev 20351
push: move `newbranch` argument into the push object One more step toward a more modular push function.
Thu, 30 Jan 2014 17:04:23 -0800 push: move `revs` argument into the push object
Pierre-Yves David <pierre-yves.david@logilab.fr> [Thu, 30 Jan 2014 17:04:23 -0800] rev 20350
push: move `revs` argument into the push object One more step toward a more modular push function.
Thu, 30 Jan 2014 16:59:25 -0800 push: move `force` argument into the push object
Pierre-Yves David <pierre-yves.david@logilab.fr> [Thu, 30 Jan 2014 16:59:25 -0800] rev 20349
push: move `force` argument into the push object One more step toward a more modular push function.
Thu, 30 Jan 2014 16:57:01 -0800 push: move `remote` argument in the push object
Pierre-Yves David <pierre-yves.david@logilab.fr> [Thu, 30 Jan 2014 16:57:01 -0800] rev 20348
push: move `remote` argument in the push object One more step toward a more modular push function.
Thu, 30 Jan 2014 16:46:30 -0800 push: ease access to current ui object
Pierre-Yves David <pierre-yves.david@logilab.fr> [Thu, 30 Jan 2014 16:46:30 -0800] rev 20347
push: ease access to current ui object The `pushoperation.repo.ui` attribute is very commonly used. we offer a faster way to access it directly through the push operation object.
(0) -10000 -3000 -1000 -300 -100 -50 -32 +32 +50 +100 +300 +1000 +3000 +10000 +30000 tip