wireprotov2: remove functions for creating response frames from bytes All code in the actual server uses oncommandresponsereadyobjects(). Test code was ported to that method. This resulted in a handful of subtle test changes. Differential Revision: https://phab.mercurial-scm.org/D4924

wireprotov2: handle noop action This action can be returned from the client reactor. We should handle it. Differential Revision: https://phab.mercurial-scm.org/D4923

wireprotov2: send protocol settings frame from client Now that we have client and server reactor support for protocol settings and encoding frames, we can start to send them out over the wire! This commit teaches the client reactor to send out a protocol settings frame when needed. The httpv2 peer has been taught to gather a list of supported content encoders and to advertise them through the client reactor. Because the client is now sending new frame types by default, this constitutes a compatibility break in the framing protocol. The media type version has been bumped accordingly. This will ensure existing clients won't attempt to send the new frames to old servers not supporting this explicit media type. I'm not bothering with the BC annotation because everything wireprotov2 is highly experimental and nobody should be running a server yet. Differential Revision: https://phab.mercurial-scm.org/D4922

wireprotov2: define and use stream encoders Now that we have basic support for defining stream encoding, it is time to start doing something with it. We define various classes implementing stream encoders/decoders for the defined encoding profiles. This is relatively straightforward. We teach the inputstream and outputstream classes how to encode, decode, and flush data. We then teach the clientreactor how to filter received data through the inputstream decoder. One of the features of the framing format is that streams can span requests. This is a differentiating feature from say HTTP/2, which associates streams with requests. By allowing streams to span requests, we can reuse compression context data across requests/responses. But in order to do this, we need a mechanism to "flush" the encoder at logical boundaries so that receivers receive all data where it is expected. And a "flush" event is distinct from a "finish" event from the perspective of certain compressors because a "flush" will retain compression context state whereas a "finish" operation will not. This is why encoders have both a flush() and a finish() and each uses specific flushing semantics on the underlying compressor. The added tests verify various behavior of decoders via clientreactor. These tests do test some compression behavior via use of outputstream. But for all intents and purposes, server reactor support for encoding is not yet implemented. Differential Revision: https://phab.mercurial-scm.org/D4921

lfs: avoid a potential variable reference before assignment error in cmdserver A coworker hit this once yesterday when pulling in thg (a retry worked), and then I hit it with strip after a pull. I had a difficult time recreating a test for this (at least one of the tricks was to not use '-R', which seems to cause reposetup() to be called for each command), so I'm not sure how large of a window there actually is for this. Calling reposetup() *after* the requirement is added will skip the hook entirely. The other issue I had was adding a couple `ui.status()` lines around the check that installs the hook. On Windows, the cmdserver process ballooned to 1.6GB and hung. Changing that to `ui.warn()` avoided the hang. It also hung on macOS, but without the large memory usage.

wireprotov2: establish dedicated classes for input and output streams Streams are unidirectional. As part of implementing encoding/decoding support, it became clear that it didn't make sense for a generic "stream" class to hold functionality related to both encoding and decoding. So we create new classes to represent the flavor of stream. Differential Revision: https://phab.mercurial-scm.org/D4920

wireprotov2: pass ui into clientreactor and serverreactor This will allow us to use config options to influence compression settings. Differential Revision: https://phab.mercurial-scm.org/D4919

wireprotov2: handle stream encoding settings frames Like what we just did for the server reactor, we teach the client reactor to handle stream encoding settings frames. The code is very similar. We define a method on the stream class to handle processing the data within the decoded frames. However, it doesn't yet do anything useful. Differential Revision: https://phab.mercurial-scm.org/D4918

wireprotov2: document client reactor actions We should document these so consumers have an easier life. Differential Revision: https://phab.mercurial-scm.org/D4917

wireprotov2: handle sender protocol settings frames We teach the server reactor to handle the optional sender protocol settings frames, which can only be sent at the beginning of frame exchange. Right now, we simply decode the data and record the sender protocol settings on the server reactor instance: we don't yet do anything meaningful with the data. Differential Revision: https://phab.mercurial-scm.org/D4916

wireprotov2: update stream encoding specification The encoding of data within streams in the frame-based protocol is not yet defined or implemented. This means that all data in wire protocol version 2 is currently being sent out raw, without compression. That's obviously not ideal. This commit formalizes the beginnings of stream encoding support in the protocol. I suspect we'll change behavior substantially in the future. My goal is to get something landed so we can use compression. We can build out more robust support later. Because the frame type ID changed, this is strictly BC. But existing code wasn't using the frame. I'll bump the framing protocol version later once code is introduced to use the new frame. Differential Revision: https://phab.mercurial-scm.org/D4915

cborutil: cast bytearray to bytes This code didn't like passing in bytearray instances. Let's cast bytearray to bytes so it works. Differential Revision: https://phab.mercurial-scm.org/D4914

tests: disable zstd in test This makes the test pass in pure installs. Differential Revision: https://phab.mercurial-scm.org/D4913

wireprotov2: remove "compression" from capabilities response This is not used. And future commits will change how this mechanism works. Let's remove it. As a bonus, this fixes some test failures on pure installs (due to zstd references). Differential Revision: https://phab.mercurial-scm.org/D4912

zstandard: vendor python-zstandard 0.10.1 This was just released. The upstream source distribution from PyPI was extracted. Unwanted files were removed. The clang-format ignore list was updated to reflect the new source of files. setup.py was updated to pass a new argument to python-zstandard's function for returning an Extension instance. Upstream had to change to use relative paths because Python 3.7's packaging doesn't seem to like absolute paths when defining sources, includes, etc. The default relative path calculation is relative to setup_zstd.py which is different from the directory of Mercurial's setup.py. The project contains a vendored copy of zstandard 1.3.6. The old version was 1.3.4. The API should be backwards compatible and nothing in core should need adjusted. However, there is a new "chunker" API that we may find useful in places where we want to emit compressed chunks of a fixed size. There are a pair of bug fixes in 0.10.0 with regards to compressobj() and decompressobj() when block flushing is used. I actually found these bugs when introducing these APIs in Mercurial! But existing Mercurial code is not affected because we don't perform block flushing. # no-check-commit because 3rd party code has different style guidelines Differential Revision: https://phab.mercurial-scm.org/D4911

rust-chg: install signal handlers to forward signals to server I use sync::Once as a synchronization primitive because it's quite easy to use, and is good enough to prevent data race in these C functions.

rust-chg: remove SIGCHLD handler which won't work in oxidized chg Since pager is managed by the Rust part, the C code doesn't know the pager pid. I could make the Rust part teach the pid to C, but still installing SIGCHLD handler seems horrible idea since we no longer use handcrafted low-level process management functions. Instead, I'm thinking of adding async handler to send SIGPIPE at the exit of the pager.

rust-chg: extract signal handlers from chg/procutil.c abortmsgerrno() and debugmsg() are removed, and the public interface instead returns success/error status. Since signal handlers can't propagate errors, the result of kill() is just ignored.

help: document about "version" template keywords

help: document about "tags" template keywords

help: document about "status" template keywords

help: document about "resolve" template keywords

help: document about "paths" template keywords

help: document about "identify" template keywords

help: document about "grep" template keywords

chgserver: catch Abort while parsing early args to shut down cleanly _loadnewui() calls dispatcher functions, which may raise Abort if unparsable arguments are passed in. The server should catch such errors and translate them to the "exit 255" instruction so the client can finish the IPC session cleanly. Spotted while porting the chg client to Rust.

chg: upgrade client to use "setumask2" command No compatibility code is added to the client side, since it's unlikely for new client to communicate with the old server.

chgserver: add "setumask2" command which uses correct message frame The first 4 bytes should be a length field, not a value. Spotted while porting chg functions to the Rust one.

packaging: "make deb" no longer fails Release 4.7 rationalized the layout of the build scripts. Unfortunately, while "make docker-ubuntu-*" and "make docker-debian-*" worked as expected, "make deb" was broken. Before this change "make deb" was failing with the following error: You are not inside a Mercurial repository! Or, after the latest changes: You are inside <fullpath>, which is not the root of a Mercurial repository Moreover, when "make deb" failed, the cleanup routine deleted the wrong directory (contrib/packaging/debian instead of <reporoot>/debian) resulting in a corrupted working copy that needed to be hg revert-ed. After this change the docker targets continue to work, and the deb one is able to finish.

packaging: cleanup() did not read the value of $CLEANUP When the original author put CLEANUP in a conditional statement he was probably willing to use it to control the "if". This change tries to restore that behaviour: the "rm" clause is triggered if and only if CLEANUP is defined and not empty.