match: catch attempts to create case-insenstive exact matchers Exact matchers are only created internally (as opposed to from user input) based on a set of files that the caller collected before, so they should always match the list exactly (i.e. case-sensitively).

test: remove aliases forcing date, use default-date Now that we have the default-date by default and all code have been updated, remove the old commands alias that forced the date as they are not longer useful. Writing tests now should be easier for everyone now that all dates should be stable.

test: prepare tests for removing date aliases In the next patch, I'm gonna removing the global command aliases that force the epoch date but some tests either fail or their output change after that. Instead I'm copying the needed aliases in the test files that will otherwise change. Update test-rebase-obsolete.t because a revision hash is based on the epoch date after a 'commit --amend' and the output will change after removing date aliases. Update test-subrepo-git.t as the git subrepo doesn't use traditional date mechanisms. I'm not sure that updating the git subrepo to support default-date make sense. Add the commit alias to the test in order for making it pass after removing the date aliases globally.

devel: update blackbox to use default-date Blackbox now obeys the 'devel.default-date' option. As a side effect we can delete the mock for blackblox related tests.

devel: use default-date config field when creating obsmarkers Also use the default-date when creating obsmarkers. Currently they are created with the current date and without any option to force their value. To test the feature, we remove some of the many 'glob' used to match obsmarker date in the tests.

devel: activate default-date in tests It will make writing future tests more easier for everyone as we won't need to glob dates anymore in tests.

devel: add a config field to force dates to timestamp 0 Add a new config field named default-date under the devel section to force all implicits date to a specific value. If a explicit date is passed, it will override the default. This patch only affect changesets. Other usages (blackbox, obsmarkers) are updated in later patchs. The test runner is setting a bunch of alias to force the '--date' argument. We will replace theses aliases in a later patch.

ui: add the possiblity to get a date config field Add the method configdate to read a date from configuration. It uses the util.rawparsedate refactored earlier to support all standard date formats.

util: refactor util.parsedate to raises ValueError Split most of util.parsedate in util.rawparsedate and make it raises ValueError instead of error.Abort. The util.parsedate function is now just a shell function converting ValueError to error.Abort for existing users. I need to parse a date from config in a later patch and use util.rawparsedate with ui.configwith which expect a convert that raises ValueError.

match: implement __repr__() and update users (API) fsmonitor and debugignore currently access matcher fields that I would consider implementation details, namely patternspat, includepat, and excludepat. Let' instead implement __repr__() and have the few users use that instead. Marked (API) because the fields can now be None.

fsmonitor: fix silly "*kwargs" bug in merge.update() override Everyone knows that it's supposed to be spelled with two asterisks. It started failing in fad5e299cfc7 (update: accept --merge to allow merging across topo branches (issue5125), 2017-02-13) because until then there was only one argument that was covered by the kwargs, so *kwargs or **kwargs both worked (or at least that's what I think with my limited understanding of Python).

revset: make `hg log -r 'wdir()^'` work (issue4905) This patch catches the WdirUnsupported exception to support wdir()^.

revlog: raise WdirUnsupported when wdirrev is passed revlog.parentrevs() is called while evaluating ^ operator in revsets. When wdir is passed, it raises IndexError. This patch raises WdirUnsupported if wdir is passed in the function. The error will be caugth in future patches.

error: add a new exception named WdirUnsupported This series intents to support wdir() predicate with different operators like ~, ^. Currently the storage class don't support wdir(). This exception is introduced so that it can be raised from places where wdir() is passed and is not supported and we can catch this where we want to support the predicate. Also throwing an error at low level and catching at some higher level is better than using if-else especially for perf.

match: replace icasefsmatch() function by flag to regular match() match() will soon gain more logic and we don't want to duplicate that in icasefsmatch(), so merge the two functions instead and use a flag to get case-insensitive behavior.

match: delete icasefsmatcher now that it's same as matcher

match: pass in normalize() function to matchers This will let us delete icasefsmatcher.

match: don't print explicitly listed files with wrong case (BC) On case-insensitive file systems, if file A exists and you try to remove it (or add, etc.) by specifying a different case, you will see something like this: $ hg rm a removing file A I honestly found this surprising because it seems to me like it was explicitly listed by the user. Still, there is a comment in the code describing it, so it is very clearly intentional. The code was added in baa11dde8c0e (match: add a subclass for dirstate normalizing of the matched patterns, 2015-04-12). I'm going to do a lot of refactoring to matchers and the feature mentioned above is going to get in my way. I'm therefore removing it for the time being and we can hopefully add it back when I'm done.

match: move body of _normalize() to a static function matcher._normalize() no longer depends on any of the matcher's state, and making it static will enable further refactoring. Note that the subdirmatcher subclass calls _normalize(), so we can't remove it completely.

match: pass 'warn' argument to _normalize() for consistency No other arguments are passed via the matcher's state, so we should treat 'warn' the consistently. More importantly, this will let us make it a static function, which will help with further refactoring.

match: replace match class by match function (API) The matcher class is getting hard to understand. It will be easier to follow if we can break it up into simpler matchers that we then compose. I'm hoping to have one matcher that accepts regular (non-include) patterns, one for exact file matches, one that always matches (and maybe one that never does) and then compose them by intersection and difference. This patch takes a simple but important step towards that goal by making match.match() a function (and renaming the matcher class itself from "match" to "matcher"). The new function will eventually be responsible for creating the simple matchers and composing them. icasefsmatcher similarly gets a factory function (called "icasefsmatch"). I also moved the other factory functions nearby.

checklink: degrade gracefully on posix when fs is readonly (issue5511) In the unlucky case, checklink tries to make a new file for the symlink test to target. If the filesystem is readonly (perhaps due to permissions in a repo owned by someone else) we just report the filesystem as not supporting symlinks, since the user probably can't write anyway.

revlog: remove some revlogNG terminology RevlogNG is not such a good name when it is no longer the newest revlog version. Since we'll soon have revlog version 2, let's remove some references to it.

revlog: tweak wording and logic for flags validation First, the logic around the if..elif..elif was subtly wrong and sub-optimal because all branches would be tested as long as the revlog was valid. This patch changes things so it behaves like a switch statement over the revlog version. While I was here, I also tweaked error strings to make them consistent and to read better.

tests: tests for revlog version and flags loading We didn't have explicit test coverage of these branches. Better late than never.

perf: allow to clear the obsstore in 'perfvolatilesets' Loading the obsstore can become a large part of the time necessary to compute the important volatile set. We add a flag purging all known obsstore related data. For example, computing the 'bumped' set currently requires reading the full obsstore, so timing greatly differ with or without that flag: Without: ! bumped ! wall 0.005047 comb 0.000000 user 0.000000 sys 0.000000 (best of 446) With: ! bumped ! wall 0.512367 comb 0.510000 user 0.480000 sys 0.030000 (best of 15)

obsolete: test an important corner case Receiving markers affecting changeset we'll receives later is legitimate and not so uncommon case. Working on cache highlighted that this was only testing in the evolve extension. We add a test for this case in core.

largefiles: replace always() method, not _always field We will soon have matchers that don't have an _always field, so largefiles needs to stop assuming that they do. _always is only used by always(), so we safely replace that method instead.

merge with stable

cext: mark constant variables

cext: move util.h to cext tree Since util.h isn't useful in plain C module, it should be placed in CPython extension directory.

cext: move back finalization of dirstateTupleType where it should be

dispatch: setup color before pager for correct console information on windows Before this patch, "hg CMD --pager on" on Windows shows output unintentionally decorated with ANSI color escape sequences, if color mode is "auto". This issue occurs in steps below. 1. dispatch() invokes ui.pager() at detection of "--pager on" 2. stdout of hg process is redirected into stdin of pager process 3. "ui.formatted" = True, because isatty(stdout) is so before (2) 4. color module is loaded for colorization 5. color.w32effects = None, because GetConsoleScreenBufferInfo() fails on stdout redirected at (2) 6. "ansi" color mode is chosen, because of "not w32effects" 7. output is colorized in "ansi" mode because of "ui.formatted" = True Even if "ansi" color mode is chosen, ordinarily redirected stdout makes ui.formatted() return False, and colorization is avoided. But in this issue case, "ui.formatted" = True at (3) forces output to be colorized. For correct console information on win32, it is needed to ensure that color module is loaded before redirection of stdout for pagination. BTW, if any of enabled extensions has "colortable" attribute, this issue is avoided even before this patch, because color module is imported as a part of loading such extension, and extension loading occurs before setting up pager. For example, mq and keyword have "colortable".

cleanup: reuse existing wctx variables instead of calling repo[None] Incidentally, this apparently means we load .hgsub one time less as well, which affects a test case.

localrepo: extract bookmarkheads method to bookmarks.py This method is only used internally by destutil, and it's obscure enough I'm willing to just move it without a deprecation warning, especially since the new method has more constrained functionality. Design-wise I'd also like to get active bookmark handling folded into the bookmark store, so that we don't squirrel away an extra attribute for the active bookmark on the repository object.

tests: avoid renamed files triggering check-commit failures I had to flag some revisions to not undergo check-commit scrutiny today to get the tests to pass, because they renamed files that had existing failures which we're not cleaning up. Let's prevent that in the future by using the extended git diff format to elide moved code.

dispatch: make request accept additional reposetups chg needs special logic around repo object creation (like, collecting and reporting repo path to the master server). Adding "reposetup" to dispatch.request seems to be an easy and reasonably clean way to allow that.

cext: extract revlog/index parsing code to own C file parsers.c is ~3000 lines and ~2/3 of it is related to the revlog index type. We already have separate C source files for directory utilities and manifest parsing. I think the quite unwieldy revlog/index parsing code should be self-contained as well. I performed the extraction as a file copy then removed content from both sides in order to preserve file history and blame. As part of this, I also had to move the hexdigit table and function to a shared header since it is used by both parsers.c and revlog.c # no-check-commit

debugcommands: use temporary dict for its command table Instead, load the table by commands.py so the debug commands should always be populated. The table in debugcommands.py is unnamed so extension authors wouldn't be confused to wrap debugcommands.table in place of commands.table.

commands: move debugcommands and debugcomplete back to commands module These commands depend heavily on the commands table, so it doesn't make much sense to isolate them to debugcommands.py. This helps eliminating the future import cycle.

commands: move templates of common command options to cmdutil (API) The goal is to get rid of the debugcommands -> commands dependency. Since globalopts is the property of the commands, it's kept in the commands module.

import-checker: drop workaround for pure modules

policy: drop custom importer for pure modules

parsers: switch to policy importer # no-check-commit

mpatch: switch to policy importer

diffhelpers: switch to policy importer # no-check-commit

bdiff: switch to policy importer # no-check-commit

base85: switch to policy importer

osutil: switch to policy importer "make clean" is recommended to test this change, though C API compatibility should be preserved.

policy: add helper to import cext/pure module These functions are sysstr API since __import__() and getattr() hate byte strings on Python 3. There's a minor BC, which is ImportError will be raised if invalid HGMODULEPOLICY is specified. I think this is more desired behavior. We're planning to add strict checking for C API compatibility. This patch includes the stub for it.

demandimport: strictly check missing locals argument locals may be an empty dict.

localrepo: mark walk convenience method as deprecated (API)

debugcommands: use repo[None].walk instead of repo.walk

cmdutil: use repo[None].walk instead of repo.walk

largefiles: use repo[None].walk instead of repo.walk

parsers: add version to help detect breaking binary changes

osutil: add version to help detect breaking binary changes See the previous patch for why.

mpatch: add version to help detect breaking binary changes

diffhelpers: add version to help detect breaking binary changes

base85: add version to help detect breaking binary changes