httppeer: expose capabilities for each command This will help code using peers to sniff out exactly what servers support. Differential Revision: https://phab.mercurial-scm.org/D4436

narrow: intersect provided matcher with narrowmatcher in `hg diff` This provides significant speedups when running diff, and no change in behavior that I'm aware of (or that the tests found). I tested with a repo that I started using narrow in after it was created and attempted to run `hg diff -c .` and similar commands in it on a commit that had files not in the narrowspec. Timing numbers below, using a similar setup as my previous commits. before=9db85644, m-u is mozilla-unified at eb39298e432d (flatmanifest) and 0553b7f29eaf (treemanifest). l-d-r is a repo simulating a situation I've encountered where there's one directory with 30k+ subdirectories. N means narrow, T means treemanifest. The narrowspec is pretty small when in use, and importantly the narrowspec is applied *after* doing the initial checkout (without narrowing), so all of these files exist in the filesystem, which is not normally the case if someone has been using narrow for the entire life of the clone. Anything less than a 5% difference in performance is most likely noise. diff --git: repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before ------+---+---+------------------------+-----------------------+------------ m-u | | | 1.292 s +- 0.009 s | 1.295 s +- 0.010 s | 100.2% m-u | | x | 1.296 s +- 0.042 s | 1.299 s +- 0.026 s | 100.2% m-u | x | | 1.292 s +- 0.010 s | 1.297 s +- 0.021 s | 100.4% m-u | x | x | 84.2 ms +- 1.2 ms | 83.6 ms +- 0.2 ms | 99.3% l-d-r | | | 188.7 ms +- 2.7 ms | 188.8 ms +- 2.0 ms | 100.1% l-d-r | | x | 189.9 ms +- 1.5 ms | 189.4 ms +- 1.2 ms | 99.7% l-d-r | x | | 97.1 ms +- 1.0 ms | 87.1 ms +- 1.0 ms | 89.7% <-- l-d-r | x | x | 96.9 ms +- 0.8 ms | 87.2 ms +- 0.7 ms | 90.0% <-- diff -c . --git: repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before ------+---+---+------------------------+-----------------------+------------ m-u | | | 231.6 ms +- 3.1 ms | 228.9 ms +- 1.6 ms | 98.8% m-u | | x | 150.5 ms +- 1.7 ms | 150.7 ms +- 1.4 ms | 100.1% m-u | x | | 233.7 ms +- 2.4 ms | 232.2 ms +- 1.9 ms | 99.4% m-u | x | x | 126.1 ms +- 1.2 ms | 126.8 ms +- 1.2 ms | 100.6% l-d-r | | | 82.1 ms +- 2.0 ms | 81.8 ms +- 1.4 ms | 99.6% l-d-r | | x | 3.732 s +- 0.020 s | 3.746 s +- 0.027 s | 100.4% l-d-r | x | | 83.1 ms +- 0.8 ms | 107.6 ms +- 2.4 ms | 129.5% <-- l-d-r | x | x | 758.2 ms +- 38.8 ms | 188.5 ms +- 1.8 ms | 24.9% <-- rebase -r . --keep -d .^^: repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before ------+---+---+------------------------+-----------------------+------------ m-u | | | 5.532 s +- 0.087 s | 5.496 s +- 0.016 s | 99.3% m-u | | x | 5.554 s +- 0.061 s | 5.532 s +- 0.013 s | 99.6% m-u | x | | 5.602 s +- 0.134 s | 5.508 s +- 0.035 s | 98.3% m-u | x | x | 582.2 ms +- 15.2 ms | 572.9 ms +- 12.0 ms | 98.4% l-d-r | | | 629.5 ms +- 12.3 ms | 622.5 ms +- 7.3 ms | 98.9% l-d-r | | x | 6.173 s +- 0.062 s | 6.185 s +- 0.076 s | 100.2% l-d-r | x | | 274.5 ms +- 10.0 ms | 272.1 ms +- 6.2 ms | 99.1% l-d-r | x | x | 4.835 s +- 0.056 s | 4.826 s +- 0.034 s | 99.8% status --change . --copies: repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before ------+---+---+------------------------+-----------------------+------------ m-u | | | 214.4 ms +- 1.4 ms | 212.2 ms +- 1.7 ms | 99.0% m-u | | x | 130.9 ms +- 1.2 ms | 131.7 ms +- 1.1 ms | 100.6% m-u | x | | 215.0 ms +- 2.1 ms | 214.9 ms +- 2.7 ms | 100.0% m-u | x | x | 109.5 ms +- 2.3 ms | 107.8 ms +- 0.9 ms | 98.4% l-d-r | | | 79.6 ms +- 0.9 ms | 79.8 ms +- 1.6 ms | 100.3% l-d-r | | x | 3.799 s +- 0.037 s | 3.928 s +- 0.021 s | 103.4% <--? l-d-r | x | | 82.7 ms +- 0.7 ms | 83.2 ms +- 1.0 ms | 100.6% l-d-r | x | x | 746.8 ms +- 6.1 ms | 739.0 ms +- 4.2 ms | 99.0% status --copies: repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before ------+---+---+------------------------+-----------------------+------------ m-u | | | 1.884 s +- 0.012 s | 1.885 s +- 0.013 s | 100.1% m-u | | x | 1.897 s +- 0.027 s | 1.909 s +- 0.077 s | 100.6% m-u | x | | 1.886 s +- 0.021 s | 1.891 s +- 0.030 s | 100.3% m-u | x | x | 92.0 ms +- 0.7 ms | 92.4 ms +- 0.4 ms | 100.4% l-d-r | | | 570.3 ms +- 18.7 ms | 552.2 ms +- 4.5 ms | 96.8% l-d-r | | x | 568.9 ms +- 16.1 ms | 567.2 ms +- 11.9 ms | 99.7% l-d-r | x | | 171.1 ms +- 2.5 ms | 170.4 ms +- 1.2 ms | 99.6% l-d-r | x | x | 171.6 ms +- 3.4 ms | 171.5 ms +- 1.7 ms | 99.9% update $rev^; ~/src/hg/hg{hg}/hg update $rev: repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before ------+---+---+------------------------+-----------------------+------------ m-u | | | 3.107 s +- 0.017 s | 3.116 s +- 0.012 s | 100.3% m-u | | x | 2.943 s +- 0.010 s | 2.945 s +- 0.019 s | 100.1% m-u | x | | 3.116 s +- 0.033 s | 3.118 s +- 0.027 s | 100.1% m-u | x | x | 318.5 ms +- 2.7 ms | 320.8 ms +- 4.8 ms | 100.7% l-d-r | | | 428.9 ms +- 4.4 ms | 429.5 ms +- 4.0 ms | 100.1% l-d-r | | x | 9.593 s +- 0.081 s | 9.869 s +- 0.043 s | 102.9% l-d-r | x | | 253.2 ms +- 3.6 ms | 254.0 ms +- 2.8 ms | 100.3% l-d-r | x | x | 1.613 s +- 0.009 s | 1.630 s +- 0.017 s | 101.1% Differential Revision: https://phab.mercurial-scm.org/D4587

identify: change {parents} to a list of nodes (BC) This is a part of the name unification. {parents} is a list of nodes in "hg log -Tjson" output. Since {rev} can be computed from (repo, node) pair, we no longer need to put it to provide {rev} to user templates. https://www.mercurial-scm.org/wiki/GenericTemplatingPlan#Dictionary

identify: use fm.hexfunc thoroughly This fixes the length of {id} in JSON and template outputs.