py3: whitelist another passing tests caught by buildbot I this indygreg recent patches made this test pass on Python 3. So thanks to him! Differential Revision: https://phab.mercurial-scm.org/D4848

manifest: remove an unused variable caught by pyflakes Uses of todel were removed in D4843 (19103e68a698). This patch will make buildbots green again. Differential Revision: https://phab.mercurial-scm.org/D4847

setup: ignore message about disabling 3rd party extensions because of version I started getting into a bind recently when switching between py2 and py3 because switching requires a `make clean`, which kills __version__.py. But then when running `make local`, it picks up the local hg.exe (MSYS seems to prefix $PATH with '.'), which doesn't know its version. That causes it to emit a warning about needing at least 4.3 to load evolve, which caused setup.py to fail saying there is no working hg executable to figure out the version. If we can ignore general extension import failures, we should be able to ignore this too.

narrow: avoid overwriting a variable I don't like to overwrite variables, especially not with a different type (because it makes it harder to explain what the variable is for, and, therefore, to name it well). Differential Revision: https://phab.mercurial-scm.org/D4846

treemanifests: remove _loadalllazy in _diff() The benchmarks below use a similar setup as in ee7ee0c516ca and my other recent commits. Yes, in some cases this runs in literally 5% of the time it previously took. before = a6f8ab53 diff --git: repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before ------+---+---+------------------------+-----------------------+------------ m-u | | | 1.301 s +- 0.004 s | 1.309 s +- 0.012 s | 100.6% m-u | | x | 1.303 s +- 0.009 s | 1.302 s +- 0.006 s | 99.9% m-u | x | | 1.308 s +- 0.006 s | 1.309 s +- 0.007 s | 100.1% m-u | x | x | 85.7 ms +- 0.6 ms | 86.0 ms +- 0.3 ms | 100.4% l-d-r | | | 197.5 ms +- 0.7 ms | 197.8 ms +- 2.2 ms | 100.2% l-d-r | | x | 199.4 ms +- 0.6 ms | 199.3 ms +- 0.9 ms | 99.9% l-d-r | x | | 86.1 ms +- 0.5 ms | 85.8 ms +- 0.9 ms | 99.7% l-d-r | x | x | 64.4 ms +- 0.4 ms | 64.4 ms +- 0.3 ms | 100.0% diff -c . --git: repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before ------+---+---+------------------------+-----------------------+------------ m-u | | | 236.7 ms +- 1.1 ms | 236.5 ms +- 1.3 ms | 99.9% m-u | | x | 158.7 ms +- 1.0 ms | 128.0 ms +- 1.0 ms | 80.7% <-- m-u | x | | 239.7 ms +- 1.8 ms | 238.1 ms +- 1.5 ms | 99.3% m-u | x | x | 132.4 ms +- 0.9 ms | 132.3 ms +- 0.6 ms | 99.9% l-d-r | | | 81.8 ms +- 0.4 ms | 81.8 ms +- 0.3 ms | 100.0% l-d-r | | x | 3.894 s +- 0.017 s | 193.6 ms +- 0.4 ms | 5.0% <-- l-d-r | x | | 106.9 ms +- 0.4 ms | 106.6 ms +- 0.3 ms | 99.7% l-d-r | x | x | 182.7 ms +- 0.8 ms | 183.3 ms +- 0.9 ms | 100.3% rebase -r . --keep -d .^^: repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before ------+---+---+------------------------+-----------------------+------------ m-u | | | 5.615 s +- 0.109 s | 5.562 s +- 0.015 s | 99.1% m-u | | x | 5.701 s +- 0.027 s | 5.715 s +- 0.023 s | 100.2% m-u | x | | 5.572 s +- 0.128 s | 5.613 s +- 0.182 s | 100.7% m-u | x | x | 633.3 ms +- 28.7 ms | 636.2 ms +- 13.8 ms | 100.5% l-d-r | | | 666.4 ms +- 17.0 ms | 658.5 ms +- 9.3 ms | 98.8% l-d-r | | x | 6.520 s +- 0.070 s | 6.505 s +- 0.026 s | 99.8% l-d-r | x | | 279.0 ms +- 13.0 ms | 276.5 ms +- 4.7 ms | 99.1% l-d-r | x | x | 1.636 s +- 0.058 s | 1.657 s +- 0.014 s | 101.3% status --change . --copies: repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before ------+---+---+------------------------+-----------------------+------------ m-u | | | 218.6 ms +- 1.4 ms | 217.9 ms +- 1.5 ms | 99.7% m-u | | x | 138.5 ms +- 0.4 ms | 108.4 ms +- 0.2 ms | 78.3% <-- m-u | x | | 220.1 ms +- 1.3 ms | 219.7 ms +- 1.5 ms | 99.8% m-u | x | x | 113.2 ms +- 0.4 ms | 112.4 ms +- 0.8 ms | 99.3% l-d-r | | | 80.2 ms +- 0.3 ms | 80.6 ms +- 0.6 ms | 100.5% l-d-r | | x | 3.899 s +- 0.020 s | 194.8 ms +- 4.0 ms | 5.0% <-- l-d-r | x | | 83.4 ms +- 0.8 ms | 83.2 ms +- 0.2 ms | 99.8% l-d-r | x | x | 732.2 ms +- 4.3 ms | 194.9 ms +- 1.0 ms | 26.6% <-- status --copies: repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before ------+---+---+------------------------+-----------------------+------------ m-u | | | 1.917 s +- 0.005 s | 1.914 s +- 0.004 s | 99.8% m-u | | x | 1.909 s +- 0.012 s | 1.934 s +- 0.004 s | 101.3% m-u | x | | 1.915 s +- 0.005 s | 1.904 s +- 0.004 s | 99.4% m-u | x | x | 94.8 ms +- 0.3 ms | 94.7 ms +- 0.2 ms | 99.9% l-d-r | | | 593.9 ms +- 1.2 ms | 594.6 ms +- 9.4 ms | 100.1% l-d-r | | x | 595.2 ms +- 3.8 ms | 597.2 ms +- 2.6 ms | 100.3% l-d-r | x | | 182.5 ms +- 1.6 ms | 182.1 ms +- 0.6 ms | 99.8% l-d-r | x | x | 149.6 ms +- 0.9 ms | 149.1 ms +- 0.8 ms | 99.7% update $rev^; ~/src/hg/hg{hg}/hg update $rev: repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before ------+---+---+------------------------+-----------------------+------------ m-u | | | 3.121 s +- 0.007 s | 3.129 s +- 0.012 s | 100.3% m-u | | x | 2.972 s +- 0.011 s | 2.981 s +- 0.012 s | 100.3% m-u | x | | 3.144 s +- 0.014 s | 3.141 s +- 0.011 s | 99.9% m-u | x | x | 312.2 ms +- 2.4 ms | 312.3 ms +- 2.1 ms | 100.0% l-d-r | | | 444.4 ms +- 4.3 ms | 446.9 ms +- 5.3 ms | 100.6% l-d-r | | x | 9.159 s +- 0.069 s | 9.182 s +- 0.040 s | 100.3% l-d-r | x | | 254.6 ms +- 1.6 ms | 255.2 ms +- 1.6 ms | 100.2% l-d-r | x | x | 1.525 s +- 0.007 s | 1.577 s +- 0.007 s | 103.4% <--? Differential Revision: https://phab.mercurial-scm.org/D4845

treemanifests: skip extraneous check for item before calling _loadlazy Differential Revision: https://phab.mercurial-scm.org/D4844

treemanifests: make _loadchildrensetlazy just call _loadlazy This was suggested on the original review for _loadchildrensetlazy (D4370), it's taken me a while to get to it though. Differential Revision: https://phab.mercurial-scm.org/D4843