hook: flush stdout before restoring stderr redirection There was a similar issue to 8b011ededfb2. If an in-process hook writes to stdout, the data may be buffered. In which case, stdout must be flushed before restoring its file descriptor. Otherwise, remaining data would be sent over the ssh wire and corrupts the protocol. Note that this is a different redirection from the one I've just removed.

hook: do not redirect stdout/err/in to ui while running in-process hooks (BC) It was introduced by a59058fd074a to address command-server issues. After that, I've made a complete fix by 69f86b937035, so we don't need to replace sys.stdio objects to protect the IPC channels. This change means we no longer see data written to sys.stdout/err by an in-process hook on command server. I think that's okay because the canonical way is to use ui functions and in-process hooks should respect the Mercurial API. This will help Python 3 porting, where sys.stdout is TextIO but ui.fout is BytesIO.

merge: change modified indicator to be 20 bytes Previously we indicated that the .hgsubstate file was dirty by adding a '+' to the end of its hash in the wctx manifest. This made is complicated to have new manifest implementations that rely on the node length being fixed. In previous patches we added added and modified node placeholders, so let's use those to indicate dirty here as well. It doesn't look like anything ever depended on this '+' (aside from it being different to the parent), so nothing else needed to change here.

dirstate: change added/modified placeholder hash length to 20 bytes Previously the added/modified placeholder hash for manifests generated from the dirstate was a 21byte long string consisting of the p1 file hash plus a single character to indicate an add or a modify. Normal hashes are only 20 bytes long. This makes it complicated to implement more efficient manifest implementations which rely on the hashes being fixed length. Let's change this hash to just be 20 bytes long, and rely on the astronomical improbability of an actual hash being these 20 bytes (just like we rely on no hash every being the nullid). This changes the possible behavior slightly in that the hash for all added/modified entries in the dirstate manifest will now be the same (so simple node comparisons would say they are equal), but we should never be doing simple node comparisons on these nodes even with the old hashes, because they did not accurately represent the content (i.e. two files based off the same p1 file node, with different working copy contents would have the same hash (even with the appended character) in the old scheme too, so we couldn't depend on the hashes period).

dirstate: change placeholder hash length to 20 bytes Previously the new-node placeholder hash for manifests generated from the dirstate was a 21byte long string of "!" characters. Normal hashes are only 20 bytes long. This makes it complicated to implement more efficient manifest implementations which rely on the hashes being fixed length. Let's change this hash to just be 20 bytes long, and rely on the astronomical improbability of an actual hash being 20 "!" bytes in a row (just like we rely on no hash ever being the nullid). A future diff will do this for added and modified dirstate markers as well, so we're putting the new newnodeid in node.py so there's a common place for these placeholders.

util: remove compressorobj API from compression engines All callers have been replaced with "compressstream." It is quite low-level and redundant with "compressstream." So eliminate it.

hgweb: use compression engine API for zlib compression More low-level compression code elimination because we now have nice APIs. This patch also demonstrates why we needed and implemented the "level" option on the "compressstream" API.

bundle2: use compressstream compression engine API Compression engines now have an API for compressing a stream of chunks. Switch to it and make low-level compression code disappear.

util: add a stream compression API to compression engines It is a common pattern throughout the code to perform compression on an iterator of chunks, yielding an iterator of compressed chunks. Let's formalize that as part of the compression engine API. The zlib and bzip2 implementations allow an optional "level" option to control the compression level. The default values are the same as what the Python modules use. This option will be used in subsequent patches.

util: remove decompressors dict (API) All in-tree consumers are now using the compengines registrar. Extensions should switch to it as well.

changegroup: use compression engines API The new API doesn't have the equivalence for None and 'UN' so we introduce code to use 'UN' explicitly.

bundle2: use compression engines API to obtain decompressor Like the recent change for the compressor side, this too is relatively straightforward. We now store a compression engine on the instance instead of a low-level decompressor. Again, this will allow us to easily transition to different compression engine APIs when they are implemented.

util: remove compressors dict (API) We no longer have any in-tree consumers of this object. Use util.compengines instead.

bundle2: use new compression engine API for compression Now that we have a new API to define compression engines, let's put it to use! The new code stores a reference to the compression engine instead of a low-level compressor object. This will allow us to more easily transition to different APIs on the compression engine interface once we implement them. As part of this, we change the registration in bundletypes to use 'UN' instead of None. Previously, util.compressors had the no-op compressor registered under both the 'UN' and None keys. Since we're switching to a new API, I don't see the point in carrying this dual registration forward.

util: create new abstraction for compression engines Currently, util.py has "compressors" and "decompressors" dicts mapping compression algorithms to callables returning objects that perform well-defined operations. In addition, revlog.py has code for calling into a compressor or decompressor explicitly. And, there is code in the wire protocol for performing zlib compression. The 3rd party lz4revlog extension has demonstrated the utility of supporting alternative compression formats for revlog storage. But it stops short of supporting lz4 for bundles and the wire protocol. There are also plans to support zstd as a general compression replacement. So, there appears to be a market for a unified API for registering compression engines. This commit starts the process of establishing one. This commit establishes a base class/interface for defining compression engines and how they will be used. A collection class to hold references to registered compression engines has also been introduced. The built-in zlib, bz2, truncated bz2, and no-op compression engines are registered with a singleton instance of the collection class. The compression engine API will change once consumers are ported to the new API and some common patterns can be simplified at the engine API level. So don't get too attached to the API...

config: mark parser regexes as bytes explicitly r-strings are not transformed into bytes by our source transformer magic.

ui: explicitly open config files in binary mode This has been working mostly accidentally, but now it works explicitly.

help: fix double word usage "most" was used twice. (I fixed a grammar error before timeless spotted it!)

setup: move cffi stuff to mercurial/cffi This patch moves all setup*cffi stuff to mercurial/cffi to make the root directory cleaner. The idea was from mpm [1]: > It seems like we could have a fair amount of cffi definitions, and > cluttering the root directory (or mercurial/) with them is probably not > a great long-term solution. We could probably add a cffi/ directory > under mercurial/ to parallel pure/. [1]: https://www.mercurial-scm.org/pipermail/mercurial-devel/2016-July/086442.html

manifest: remove manifest.add and add memmfctx.write This removes one more dependency on the manifest class by moving the write functionality onto the memmanifestctx classes and changing the one consumer to use the new API. By moving the write path to a manifestctx, we now give the individual manifests control over how they're read and serialized. This will be useful in developing new manifest formats and storage systems.

context: add manifestctx property on changectx This allows us to access the manifestctx for a given commit. This will be used in a later patch to be able to copy the manifestctx when we want to make a new commit.

manifest: add copy to mfctx classes This adds copy functionality to the manifestctx classes. This will be used in an upcoming diff to copy a manifestctx during commit so we can modify the manifest before committing.

manifest: introduce memmanifestctx and memtreemanifestctx This introduces two new classes to represent in-memory manifest instances. Similar to memchangectx, this lets us prepare a manifest in memory, then in a future patch we will add the apis that can commit this in memory structure.

manifestctx: add _revlog() function The `self._repo.manifestlog._revlog` code is getting copy and pasted a lot in manifestctx. Let's make it a function so it can be reused. This will make future patches cleaner too.

manifest: remove manifest.find As part of removing dependencies on manifest, this drops the find function and fixes up the two existing callers to use the equivalent apis on manifestctx.

changegroup: remove remaining uses of repo.manifest The remaining uses of repo.manifest in the changegroup module are treating the manifest exclusively as a revlog, so let's replace them with instances of the revlog directly. This is part of dropping all dependencies on repo.manifest in favor of repo.manifestlog.

treemanifest: fix a "treeinmem" case f2c5b9d48b29 (manifest: make treemanifestctx store the repo, 2016-10-18) broke most tests when run with treeinmem=True. The treeinmem mode can not be enabled by the user, so this did not break anything in practice, but it's useful to have it working for testing the treemanifest code.

perf: support measuring bdiff for all changeset related data The --all argument changes the behavior of `perfbdiff` to pull in fulltext revision pairs for all changes related to a changeset. The p1 and p2 manifests will be bdiffed against current. Every file that changed between p1 and current will have its file revisions loaded and bdiffed. This mode of operation effectively measured the bdiff time required for `hg commit`.

perf: support bdiffing multiple revisions in a single revlog This is useful for testing bdiff performance on several revision pairs at a time.

perf: prepare to handle multiple pairs in perfbdiff Before, we only supported benchmarking a single pair of texts with bdiff. We want to enable feeding larger corpora into this benchmark. So rewrite the code to support that.