test-bundle-type: replace unbundle with debugbundle We now have a convenient command to look at bundle contents, let's use it.

bundle: extract the parsing of the bundle type in a function We are going to introduce significant extensions of the bundle parsing code to support creation of bundle2 through the bundle command. As an early step, we extract the logic in its own function.

changegroup: add version argument to getchangegroup For some obscure reasons (probably upsetting a Greek goddess), getchangegroup did not had a 'version' argument to control the changegroup version. We fixes this to allow cg02 to be used with 'hg bundle' in the future.

changegroup: add version argument to getlocalchangegroup For some obscure reasons (probably upsetting a Greek goddess), getlocalchangegroup did not have a 'version' argument to control the changegroup version. We fix this to allow cg02 to be used with 'hg bundle' in the future.

shelve: bundle using bundle2 if repository is general delta (issue4862) This will prevent expensive delta computation on bundling and is similar to what we do for strip backup.

shelve: move changegroup generation inside writebundle We will generate different changegroup if general delta is enabled so we gather this in the lower level function. There wasn't any good reason to have it in the main code anyway.

shelve: compress on-disk bundle Shelve is using 'HG10UN' bundle for no obvious reason. Changing this to 'HG10BZ' as we do for other bundle stored on disk.

merge with stable

notify: fix fromauthor setting for 'incoming' hook type (issue4194) Set the author field in notification emails for the 'incoming' hook type in addition to 'changegroup' and 'outgoing' types.

templater: protect word() from crashing on out of range negative value The function isn't documented to work with negative values at all, but it does, which can be useful. However, the range check didn't account for this.

commands: add a new debug command to print merge state We're going to be extending the merge state very soon, and this will give us a way to test all that.

merge.mergestate: factor out code to validate v1/v2 records We're going to need this in another place in upcoming patches.

localrepo: prevent wlock from being inherited when a transaction is running Review feedback from Pierre-Yves David. A separate line of work is working to ensure that dirstate writes are written to a separate 'pending' file while a transaction is active. Lock inheritance currently conflicts with that, so dodge the issue by simply preventing inheritance while a transaction is running. Custom merge drivers aren't going to run inside a transaction, so this doesn't affect that.

lock: add a way to prevent locks from being inherited We want to prevent locks from being inherited sometimes (e.g. when there's a currently running transaction, which will break a lot of assumptions we're making in here.)

test-fncache: use args/kwargs for lock wrapper This is annoying to keep up to date, and also just plain unnecessary.

rebase: enable histedit for useful help with it

rebase: suggest help -e histedit Users unfamiliar with an extension should be reading the documentation for the feature, not the command.

rebase: factor out histedit help command

util: use tuple accessor to get accurate st_mtime value (issue4836) Because st.st_mtime is computed as 'sec + 1e-9 * nsec' and double is too narrow to represent nanoseconds, int(st.st_mtime) can be 'sec + 1'. Therefore, that value could be different from the one got by osutils.listdir(). This patch fixes the problem by accessing to raw st_mtime by tuple index. It catches TypeError to fall back to st.st_mtime because our osutil.stat does not support tuple index. In dirstate.normal(), 'st' is always a Python stat, but in dirstate.status(), it can be either a Python stat or an osutil.stat. Thanks to vgatien-baron@janestreet.com for finding the root cause of this subtle problem.

util: extract stub function to get mtime with second accuracy This function is trivial but will need a long comment why it can't use st.st_mtime. See the next patch for details.

scmutil: add a way for a repo's wlock to be inherited by a subprocess This is part of a series that will allow locks to be inherited by subprocesses in limited circumstances. In the future, we'll call this for custom merge drivers.

scmutil: add a way for a subprocess to be run with an inheritable lock This is part of a series that will allow locks to be inherited by subprocesses in limited circumstances. In an upcoming patch, we'll add an API for the wlock to be inherited.

localrepo: add a way to get the current wlock if it's held This will be useful to pass around a reference to the lock to some functions we're going to add to scmutil. We don't want those functions to live in localrepo to avoid bloat.

localrepo: add a way to get the current lock if it's held We'll use this in upcoming patches to return a reference to the wlock if it's held.

test-help: verify that extension keywords appear in help templates fixed by a2291c9c85a1

templatekw: add {changes}, {distance} and {tag} to the {latesttag} keyword

templater: introduce {latesttag()} function to match a pattern (issue4184) This allows the latest class of tag to be found, such as a release candidate or final build, instead of just the absolute latest. It doesn't appear that the existing keyword can be given an optional argument. There is a keyword, function and filter for 'date', so it doesn't seem harmful to introduce a new function with the same name as an existing keyword. Most functions are pretty Mercurial agnostic, but there is {revset()} as precedent. Even though templatekw.getlatesttags() returns a single tuple, one entry of which is a list, it is simplest to present this as a list of tags instead of a single item, with each tag having a distance and change count attribute. It is also closer to how {latesttag} returns a list of tags, and how this function works when not given a '%' operator.

templatekw: introduce showlatesttags() to handle {latesttag} keywords The keywords {changes}, {distance} and {tag} will be available on a future template method that will allow pattern matching against tag names. For consistency, these should be available on the existing {latesttag} keyword as well. I debated whether or not to add {tag} instead of just continuing with the existing {latesttag}. But it seems clearer not to have the same name for two distinct things (a list in the LHS of %, and an individual tag value on the right). The value of latesttags[0] is the date of commit for the cset to which the tag is applied (i.e. not the date the tag was applied), and therefore isn't made visible because it doesn't seem interesting. It appears that this is merely an internal implementation detail for sorting csets in a stable manner when there are different branches.

templatekw: factor out the changessincetag calculation to a private method This will be reused in the next patch.

templatekw: allow getlatesttags() to match a specific tag pattern This will allow the latest class of tag to be found, such as a release candidate or final build, instead of just the absolute latest. It will be exposed in a future patch. It's unfortunate that the original 'latesttags' cache can't be used to determine the proper values, but it isn't fully populated for the entire repo. For example, the {latesttagdistance} keyword on the Mecurial repo builds the cache up back to the revision for 1.4. If the pattern was 're:^0\.\d$', that wouldn't be in the cache. Maybe this can be optimized some other way, but for now, this is the simpliest implementation.

util: extract stringmatcher() from revset This is used to match against tags, bookmarks, etc in revsets. It will be used in a future patch to do the same tag matching in templater.

util.chunkbuffer: avoid extra mutations when reading partial chunks Previously, a read(N) where N was less than the length of the first available chunk would mutate the deque instance twice and allocate a new str from the slice of the existing chunk. Profiling drawed my attention to these as a potential hot spot during changegroup reading. This patch makes the code more complicated in order to avoid the aforementioned 3 operations. On a pre-generated mozilla-central gzip bundle, this series has the following impact on `hg unbundle` performance on my MacBook Pro: before: 358.21 real 317.69 user 38.49 sys after: 301.57 real 262.69 user 37.11 sys delta: -56.64 real -55.00 user -1.38 sys

util.chunkbuffer: refactor chunk handling logic This will make the next patch easier to read. It provides no benefit on its own.

util.chunkbuffer: special case reading everything The new code results in simpler logic within the while loop. It is also faster since we avoid performing operations on the queue and buf collections. However, there shouldn't be any super hot loops for this since the whole point of chunkbuffer is to avoid reading large amounts of data at once. This does, however, make it easier to optimize chunkbuffer in a subsequent patch.

revert: add reference to backout

backout: add reference to revert

localrepo: allow wlock to be inherited This is part of a series that will allow locks to be inherited by subprocesses in limited circumstances. When allowed, the parent process will pass down requisite information to the child process by way of this environment variable.

lock.release: don't call postrelease functions for inherited locks Review feedback from Pierre-Yves David. The postrelease functions typically assume the lock is not held at all.

lock: turn prepinherit/reacquire into a single context manager Review feedback from Pierre-Yves David. This makes the overall code cleaner and less error-prone, and makes a previously explicitly checked error state impossible.

localrepo: add a note about parentenvvar Review feedback from Pierre-Yves David.

exchange: add "streaming all changes" to bundle2 pulling This is the beginning of client-side support for performing a stream clone using bundle2. The main bundle2 pull function checks whether to perform a streaming clone and outputs a message if so. While we have a duplicate message, it seems easier to have all the bundle2 console writing in one location and in an easy-to-read conditional block.

streamclone: move "streaming all changes" message location Previously, the message was printed after we requested and started processing the remote stream. This seems like something that we should do before calling out to the remote. Moving it also makes it easier to deal with the bundle2 implementation.

streamclone: move payload header generation into own function The stream clone data over the wire protocol contains a header line indicating total file count and data size. In bundle2, this metadata can be captured by a part parameter and doesn't need to be in the body. In preparation for bundle2, have generatev1() return the raw metadata and move the header generation to its own function.

streamclone: move payload header line consumption bundle2 parts have parameters. These are a logical place for "header" data such as the file count and payload size of stream clone data. In preparation for supporting stream clones with bundle2, move the consumption of the header line from the payload into maybeperformlegacystreamclone(). Note: the header line is still being emitted by generatev1(). This will be addressed in a subsequent patch.

streamclone: teach canperformstreamclone to be bundle2 aware We add an argument to canperformstreamclone() to return False if a bundle2 stream clone is available. This will enable the legacy stream clone step to no-op when a bundle2 stream clone is supported. The commented code will be made active when bundle2 supports streaming clone. This patch does foreshadow the introduction of the "stream" bundle2 capability and its "v1" sub-capability. The bundle2 capability mirrors the existing "stream" capability and is needed so clients know whether a server explicitly supports streaming clones over bundle2 (servers up to this point support bundle2 without streaming clone support). The sub-capability will denote which data formats and variations are supported. Currently, the value "v1" denotes the existing streaming clone data format, which I intend to reuse inside a bundle2 part. My intent is to eventually introduce alternate data formats that can be produced and consumed more efficiently. Having a sub-capability means we don't need to introduce a new top-level bundle2 capability when new formats are introduced. This doesn't really have any implications beyond making the capabilities namespace more organized.

streamclone: refactor canperformstreamclone to accept a pullop This isn't strictly necessary. But a lot of pull functionality accepts a pulloperation so extra state can be added easily. It also enables extensions to perform more powerful things.

exchange: expose bundle2 availability on pulloperation Like the previous patch, the value is cached and will prevent a function level import in streamclone.py.

exchange: expose bundle2 capabilities on pulloperation This adds a cache and makes accessing the capabilities slightly simpler, as you don't need to directly go through the bundle2 module. This will also help prevent a function-level import in streamclone.py. This patch arguably isn't necessary. But I think it makes things slightly nicer.