hg: introduce "wirepeersetupfuncs" to setup wire peer by extensions (issue4109) Since changeset 6f72e7d28b35, "reposetup()" of each extensions is invoked only on repositories enabling corresponded extensions. This causes that largefiles specific interactions between the repository enabling largefiles locally and remote (wire) peer fail, because there is no way to know whether largefiles is enabled on the remote repository behind the wire peer, and largefiles specific "wireproto functions" are not given to any wire peers. To avoid this problem, largefiles should be enabled in wider scope than each repositories (e.g. user-wide "${HOME}/.hgrc"). This patch introduces "wirepeersetupfuncs" to setup wire peer by extensions already enabled. Functions registered into "wirepeersetupfuncs" are invoked for all wire peers. This patch uses plain list instead of "util.hooks" for "wirepeersetupfuncs", because the former allows to control order of function invocation by order of extension enabling: it may be useful for workaround of problems with combination of enabled extensions

templater: raise error for unknown func Previously, if a template '{foo()}' was given, the buildfunc would not be able to match it and hit a code path that would not return so it would error out later in the templater stating that NoneType was not iterable. This patch makes sure that a proper error is raised so that the user can be informed. Tests have been updated.

bundle2: support bundling of empty part (with a type) Here start the work on bundle2 parts. Our first step is to be able to bundle a simplistic part that just have a type, no parameters, empty payload.

revsetbenchmark: add a summary at the end of execution The summary list timing per revset making it much more easier to compare revision to each other.

revsetbenchmark: retrieve the benchmark value in python We retrieve the output of the perf extension and print it ourself. This open the door to processing of this data in the script.

revsetbenchmark: get revision to benchmark in a function And move it to proper subprocess call.

revsetbenchmark: convert revision display to proper subprocesscall

revsetbenchmark: convert performance call to proper subprocess call

revsetbenchmark: convert update to proper subprocess call

revsetbenchmark: fix semicolon

revsetbenchmark: simplify and convert the script to python The script is now in python. That translation is very raw, more improvement to comes: The "current code" and "base" entry have been dropped. This is trivial to get same result using a tagged revision or "." in the list of benchmarked revision.

revsetbenchmapi: fix template The revision description missed an \n

perf: unroll the result in perfrevset With the new lazy revset implementation, we need to actually read all elements to trigger all the computations. Otherwise a no-op if of course much faster than the full work.

_addset: add a __len__ method Back in the time where repo.revs(...) returned a list, calling `len(...)` on the result was quite common. We reinstall this on _addset. There is absolutely no easy way to test this from the command line. The commands using this in the evolve extension will eventually land into core.

bundle2: implement the mandatory/advisory logic for parameter Parameter starting with an upper case are mandatory, the one starting with a lower case are advisory and may be ignored.

bundle2: print debug information during unbundling The unbundler class is now feed with an ui object and use it to transmit data about the unbundling process.

bundle2: print debug information during bundling The bundler class is now feed with an ui object and use it to transmit data about the bundling process.

bundle2: add ability to write to a file to the test Next changesets are about improving debug output during bundling. We won't be able to simply bundle to stdin in this case. The bundle2 stream would be interleaved with debug output.

subrepo: factor out Git version check to add doctests Followup to 6a2acb0d9352::e5641536e4d5.

contrib: add "hgperf" command to measure performance of commands easily Newly added "hgperf" command repeats "dispatch.runcommand()" for specified Mercurial command and measure performance of it in the same manner of "contrib/perf.py" extension. Users (mainly developers) can examine performance of the target command easily, without adding new entry for it to "contrib/perf.py" extension.

grep: exit loop immediately, if matching is found in the file for "hg grep -l" Before this patch, internal function "display()" of "hg grep" is not efficient for "-l"/"--files-with-matches", because loop is continued, even after the first matching is found in the specified file. This patch exits loop immediately, if matching is found for "--files-with-matches". In this case, "before is None" is equal to "opts.get('files_with_matches')".

grep: use "found" instead of "filerevmatches" examination for efficiency Before this patch, internal function "display()" of "hg grep" stores whether matching is already found or not into the dictionary "filerevmatches" by "(fn, rev)" tuple as the key. But this is redundant, because: - "filerevmatches" is local variable of "display()", so each "display()" invocations don't affect others - both "fn" and "rev" (gotten from "ctx" argument) are never changed in each "display()" invocations Then, "filerevmatches" should have only one entry at most, and "(fn, rev) in filerevmatches" should be equal to "found". This patch uses "found" instead of "filerevmatches" examination for efficiency.

grep: reuse the first "util.binary()" result for efficiency Before this patch, to check whether the file in the specified revision is binary or not, "util.binary()" is invoked via internal function "binary()" of "hg grep" once per a line of "hg grep" output, even though binary-ness is not changed in the same file. This patch reuses the first "util.binary()" invocation result by annotating internal function "binary()" with "@util.cachefunc". Performance improvement measured by "hgperf grep -r 88d8e568add1 vfs mercurial/scmutil.py": before this patch: ! wall 0.024000 comb 0.015600 user 0.015600 sys 0.000000 (best of 118) after this patch: ! wall 0.023000 comb 0.015600 user 0.015600 sys 0.000000 (best of 123) Status of recent(88d8e568add1) "mercurial/scmutil.py": # of lines: 919 (may affect cost of search) # of bytes: 29633 (may affect cost of "util.binary()") # of matches: 22 (may affect frequency of "util.binary()")

util: add the code path to "cachefunc()" for the function taking no arguments Before this patch, "util.cachefunc()" caches the value returned by the specified function into dictionary "cache", even if the specified function takes no arguments. In such case, "cache" has at most one entry, and distinction between entries in "cache" is meaningless. This patch adds the code path to "cachefunc()" for the function taking no arguments for efficiency: to store only one cached value, using list "cache" is a little faster than using dictionary "cache".

help: add examples to incoming

revset: fix generatorset race condition If two things were iterating over a generatorset at the same time, they could miss out on the things the other was generating, resulting in incomplete results. This fixes it by making it possible for two things to iterate at once, by always checking the _genlist at the beginning of each iteration. I was only able to repro it with pending changes from my other commits, but they aren't ready yet. So I'm unable to add a test for now.

tests: don't hardcode path to bash interpreter Use the env binary to figure out the correct bash to use. Certain systems ships with an ancient version of bash, but the user might have installed a newer one that is earlier in $PATH. For example the current version of Mac OS X ships version 3.2.51 of bash, which does not understand new fancy builtins such as readarray. A user might install a newer version of bash, use that as their shell and add that path before bin.

contrib: don't hardcode path to bash interpreter Use the env binary to figure out the correct bash to use. Certain systems ships with an ancient version of bash, but the user might have installed a newer one that is earlier in $PATH. For example the current version of Mac OS X ships version 3.2.51 of bash, which does not understand new fancy builtins such as readarray. A user might install a newer version of bash, use that as their shell and add that path before bin.

contrib: explicitly enable perf extension for revset tests If a developer doesn't have the perf extension enabled the revset benchmarking will fail. This patch explicitly enables the perf extension when running the tests.

merge with stable

revset: improve performance of _generatorset.__contains__ (issue 4201) _generatorset.__contains__ and __contains__ from child classes were calling into __iter__ to look for values. Since all previously-encountered values from the generator were cached and checked in __contains__ before this iteration, __contains__ was effectively performing iteration busy work which could lead to an explosion of redundant work. This patch changes __contains__ to be more intelligent. Instead of looking at all values via __iter__, __contains__ will instead go straight to "new" values from the underlying generator. On a clone of the Firefox repository with around 200,000 changesets, this patch decreases the execution time of the revset '::(200067)::' from ~100s to ~4s on the author's machine. Rebase operations (which use the aforementioned revset), speed up accordingly.

localrepo: omit ".hgsubstate" also from "added" files Before this patch, "localrepository.commit()" omits ".hgsubstate" from "modified" (changes[0]) and "removed" (changes[2]) file list before checking subrepositories, but leaves one in "added" (changes[1]) as it is. Then, "localrepository.commit()" adds ".hgsubstate" into "modified" or "removed" list forcibly, according to subrepository statuses. If "added" contains ".hgsubstate", the committed context will contain two ".hgsubstate" in its "files": one from "added" (not omitted one), and another from "modified" or "removed" (newly added one). How many times ".hgsubstate" appears in "files" changes node hash, even though revision content is same, because node hash calculation uses the specified "files" directly (without duplication check or so). This means that node hash of committed revision changes according to existence of ".hgsubstate" in "added" at "localrepository.commit()". ".hgsubstate" is treated as "added", not only in accidental cases, but also in the case of "qpush" for the patch adding ".hgsubstate". This patch omits ".hgsubstate" also from "added" files before checking subrepositories. This patch also omits ".hgsubstate" exclusion in "qnew"/"qrefresh" introduced by changeset d666da075b91, because this patch makes them meaningless. "hg parents --template '{files}\n'" newly added to "test-mq-subrepo.t" enhances checking unexpected multiple appearances of ".hgsubstate" in "files" of created/refreshed MQ revisions.

dispatch: only do __import__(debugger) when a debugger is requested When having ui.debugger=somedebugger in one's ~/.hgrc, this then somedebugger would be imported for every hg command. With this patch, this import only happens if the --debugger parameter is passed.

hg: use "os.path.join()" to join path components which may be empty (issue4203) Changset 2d0ab571b822 rewriting "hg.copystore()" with vfs uses 'dstbase + "/lock"' instead of "os.path.join()", because target files given from "store.copyfiles()" already uses "/" as path separator But in the repository using revlog format 0, "dstbase" becomes empty ("data" directory is located under ".hg" directly), and 'dstbase + "/lock"' is treated as "/lock": in almost all cases, write access to "/lock" causes "permission denied". This patch uses "os.path.join()" to join path components which may be empty in "hg.copystore()".

revset: document the regular expression support for tag(name) This has been supported since 20f55613fb2a, in 2.3.

help: allow -k to find debug commands

help: let 'hg help debug' show the list of secret debug commands The names of the debug commands are not easy to remember and they are not easy to find.

tests: add run-tests --changed option for running tests changed in revisions Convenient when polishing patches and changing details of how they change test output. This will probably break in weird ways for revsets with special quoting ... but it is good enough for run-tests. Usage example: yes | ./run-tests.py -li --changed qparent

repo: rephrase the "missing requirement" error message Unknown requirements will now be reported as: abort: repository requires features unknown to this Mercurial: largefiles! (see http://mercurial.selenic.com/wiki/MissingRequirement for more information) Some features of this phrasing: * avoid double ':' in abort message * make it more clear who requires and knows what * don't quote the requirement names - it is not something the user entered or need the exact spelling of ... and it is "identifiers" that are unambiguous anyway * remove double hint by removing "(upgrade Mercurial)" comment * don't mention upgrading Mercurial without mentioning enabling the feature - instead, just refer to wiki page for both * don't just talk about "details", talk about "more information"

revpair: drop useless conditional The `if not revs:` case is tested at the beginning of the function.

merge with stable

subrepo: add trailing newlines to warnings

subrepo: convert matched string to integer before comparing Git version (1, '4') is greater than (1, 5) so the version check never actually worked.

subrepo: only retrieve the first two components of the Git version This makes the version detection compatible with Git versions like '1.9-rc0'. We only cared about the first two components of the version anyway.

bundle2: force the first char of parameter to be an letter. We need a case sensitive character to convey mandatory/advisory parameter semantic in a later patches.

bundle2: refuse empty parameter name The bundle2 now raise value error when seeing invalid parameter names. The first introduced rules is: no empty parameter. The test extension is improve to properly abort when ValueError are encountered.

bundle2: urlunquote stream parameter name and value during unbundling Align to new escaping used during bundling.

bundle2: urlquote stream parameter name and value This introduces support for arbitrary characters in stream parameters name and value. The urlquote format has been chosen because it is: - simple, - standard, - no-op on simple alphanumerical entry.